ERROR: The specified parameter 'Rental' expects a single value, but your name criteria "PROD" corresponds to multiple values.

Similar Questions

• travel-vmhost error - the destination of the specified parameter expects a single value

  I run in an error using Move-VMHost under PowerCLI version 5.5 R2 Patch 1 and 5.8 Release 1.

  There are 6 clusters in the data center.  To the host of the virtual machine between 5 of the clusters that I can run successfully:

  Get-VMHost vmhostname | Moving-VMHost Destination 'NOMCLUSTER '.

  But one group in particular always fails when it is specified as destination of the error message:

  The specified parameter "Desintation" expects a single value, but your criteria of name "cluster6" corresponds to multiple values.

  The only way I can get this working is to do:

  Get-VMHost vmhostname | -Move Destination VMHost (get-cluster | where {$_.name - eq "cluster6"})

  How 'cluster6' could correspond to several cluster names?  Is this just a bug in PowerCLI?  I started using PowerCLI more recently and noticed that some cmdlets can be a bit odd (for example had a few other problems with Get-VMHostStorage and found others have had similar problems with it).  I use this process of moving part of a more automated deployment script.  Prefer to make it as efficient as possible without having to insert the extra if possible Get-Cluster command.

  The Destination parameter on the Move-VMHost cmdlet accepts any VIContainer, not only the clusters.

  I suspect it could VIContainer one another with the same name.

  What this does?

  Get-inventory-name 'cluster6 '.

• "expects a single value / corresponds to multiple values" error script New - vm in PowerCLI

  I have been responsible for creating some 800 + virtual desktops so, naturally, this is something I want to script.  After reading through the large bases of knowledge here, I was able to create what I thought, it was the correct code.  It worked when I was just "write-host" ing lines command to see if the variable creation/uasge worked well.  When I removed the lines of write-host and tried to use the actual orders new-vm, I started having different "of the specified parameter '$vmhost' expects only one value, but your criteria of name ' xxx - vm53.yyyyyyyyy.com' correspondingponds to several values." errors.  Here is my code, marked specificities:

  Add-PSSnapin VMWare.VimAutomation.Core # PowerCli add script environmen t
  $creds = get-vicredentialstoreitem-'c:\temp\credfile.xml' # chopped access file password to authentice with "sys" service account from the file
  connect-viserver-Server $creds.host-$creds.user username-password $creds.password
  $host1 = get-cluster "HVD1" | get-vmhost | Tri-objet "memoryusagemb" | Select-object - 1 first | foreach {$_.name} # get the VMWare hosts with less use of the memory of the cluster host "HVD1" registration
  $dstore = get-datastore ' vdi_ * ' | Tri-objet 'FreeSpaceMB' - descending | Select-object - 1 first | foreach {$_.name} # Get datastore disk with most freespace to be VDI_ *
  $VMBaseName = "XX-P01-HVD" # definition of trade names XenDesktop hosted
  $Template = get-model model-CBD-XD-XP | Select-object - 1 first | foreach {$_.name} # Setting for XenDesktop hosted Commercial model
  $OSCustSpec = "CBD - XD XP" hosted # Setting for hosted Commercial XenDesktop customization script
  $loc = 'Desktop' # configuration for XenDesktop folder
  $ResPool = get-resourcepool XX-P01-HVD | Select-object - 1 first | foreach {$_.name} # XenDesktop hosted Commercial resource pool setting
  [int] $FirstNumber = 0
  [int] $HostTotal = 0
  [int] $ctr = 0
  
  $FirstNumber = Read-Host "enter the first digit to the VMWare host range".
  $HostTotal = Read-Host "enter the quantity for the VMWare host range".
  $HostNumber = $FirstNumber
  $HostFinal = $HostNumber + $HostTotal
  
  do {}
  $vmname = $vmbasename + $HostNumber
  new-vm - vmhost $host1-name $VMName - $ResPool - $loc location ResourcePool - datastore - slim - DiskStorageFormat $dstore model $template - OSCustomizationspec $OSCustSpec # Execute the new VMWare host creation
  Start-vm $VMName # start the virtual machine to start the customization process
  $HostNumber ++
  $ctr += 1
  If ($ctr - eq 5) {write-host write-host "break 10 Minutes' sleep s 600; $ctr = 0; write-host} # sleep for 600 seconds every 5 VMs to avoid overloading ESX hosts
  } until ($HostNumber - eq $HostFinal)

  Here are my mistakes:

  
  New - VM: 23/03/2011-17:42:22 new-VM parameter specified "VMHost.
  expects a single value, but your criteria of name ' xxx - vm53.yyyyyyyyy.com' corresponding
  ponds to multiple values.
  To C:\temp\xx_deploy.ps1:31 character: 7
  + new-vm < < < <-vmhost $host1-name $VMName - $ResPool - $l location ResourcePool
  OC - datastore - slim - DiskStorageFormat $dstore model $template - OSCustomizat
  creating # ionspec $OSCustSpec of the new VMWare host Execute
  + CategoryInfo: InvalidResult: (System.Collecti... dObjectInterop)
  (]: List 1) [new-VM], VimException
  + FullyQualifiedErrorId: Core_ObnSelector_SelectObjectByNameCore_MoreResu
  ltsThanExpected, VMware.VimAutomation.ViCore.Cmdlets.Commands.NewVM
  
  New - VM: 23/03/2011-17:42:23 new-VM parameter specified ' Resourc
  ePool' expects a single value, but your name criteria is "XX-P01-HVD.
  multivalued.
  To C:\temp\xx_deploy.ps1:31 character: 7
  + new-vm < < < <-vmhost $host1-name $VMName - $ResPool - $l location ResourcePool
  OC - datastore - slim - DiskStorageFormat $dstore model $template - OSCustomizat
  creating # ionspec $OSCustSpec of the new VMWare host Execute
  + CategoryInfo: InvalidResult: (System.Collecti... dObjectInterop)
  (]: List 1) [new-VM], VimException
  + FullyQualifiedErrorId: Core_ObnSelector_SelectObjectByNameCore_MoreResu
  ltsThanExpected, VMware.VimAutomation.ViCore.Cmdlets.Commands.NewVM
  
  New - VM: 23/03/2011-17:42:23 new-VM parameter ResourcePool: could not
  t find any object specified by its name.
  To C:\temp\xx_deploy.ps1:31 character: 7
  + new-vm < < < <-vmhost $host1-name $VMName - $ResPool - $l location ResourcePool
  OC - datastore - slim - DiskStorageFormat $dstore model $template - OSCustomizat
  creating # ionspec $OSCustSpec of the new VMWare host Execute
  + CategoryInfo: ObjectNotFound: (VMware.VimAutom, ol ResourcePo)
  OL:RuntimePropertyInfo) [new-VM], ObnRecordProcessingFailedException
  + FullyQualifiedErrorId: Core_ObnSelector_SetNewParameterValue_ObjectNotF
  oundCritical, VMware.VimAutomation.ViCore.Cmdlets.Commands.NewVM

  I had multiple values for some of the entries, that's why I tried to analyze with the first '-1' and outside the script, the values return very well.

  Any help?
  

  And this is the cause of the problem.

  You feed the New - VM name in fact only 1, and the cmdlet, by OBN, tries to resolve the name into an object.

  But since there are 2 connections, it will get an object returned by each connection.

  Where the multiple value message.

  Check if you have several Connect-VIServers in the script and maybe close all connections before the script starts.

  Or switch to simple mode with the Set-PowerCLIConfiguration cmdlet.

• Converter Standalone 4.3.0 question - Get "the specified parameter was not correct" and no source listed volumes

  Sorry - hopefully an admin can move this to the correct forum. I could find no community forum labeled converter so no idea where to post this message.

  My first time trying to use the converter. Use the latest version of the Converter 4.3.0 to try a P2V by using the source computer. This is a laptop Dell D820 running Windows 7 Ultimate x 64 business. I chose the source machine and all the default settings. Destination product is VMware Workstation 7.x and target files are either local or to a port USB drive (tried both). In the last step, I get a yellow bar with the error "the specified parameter was not correct" "but the following quotes are empty and presume it suppose to say the name of the setting.» The only thing I see that is suspect is that if I click on change in section 'Data copy', the list of volumes and empty and assume that shouldn't be. The sample video to get advice on the use of converter on VMware support sites show a volume listed here. I tried the same approach on a completely different system under Vista SP2 and still no volumes appear so maybe it normal?

  No idea what I am doing wrong? I did export logs and watch and it appears no volume information has been captured (a lot of & lt; destroyed & gt ;) but even once, just guessing.) Any advice would be appreciated greadly.

  Thank you

  Don

  I had the same problem on a Win7 x 64 machine... There was no listed disk to convert.

  I managed to solve the problem by running the converter as an administrator. Right-click on the Desktop Converter icon and select run as administrator.

  The disks appears and you can select which can be the converter.

• Removal of startup parameter error: the specified Service does not exist as an installed Service

  Hello

  I am currently removing two services in Autoruns, for the reason that they are highlighted, and that means that it no longer exists. However, I'm running into some trouble while he was trying to do, I get the following error:

  Removal of startup parameter error: the specified Service does not exist as an installed Service

  For diagnosis, I downloaded my log of Autoruns on OneDrive text file and you can view it by clicking here.

  Thank you

  Party of Lighthouse

  My research yesterday using Google yesterday suggested malware damage.

  Select Start, all programs, accessories, right-click right-click command promptand click run as administrator on the menu drop-down... Type cd\ and press ENTER. Type "chkdsk c:/r" without the quotes and press ENTER. Make sure you include the spaces indicated. Enter it when asked if you want to run chkdsk on restart the computer. Type exit, press ENTER, and then restart the computer.

  Please run the SFC system and say if she cannot fix corrupted files: http://support.microsoft.com/kb/929833

• New-VM with OSCustomizationSpec, error "a specified parameter was not correct."

  I'm doing a script where I read a CSV file with settings to deploy multiple virtual machines. Now, I added functionality to get him to make sysprep with the help of OSCustomizationSpec and when I tested it work very well. After that, I made a few minor, such changes that added "-ResourcePool" and other things I can't remember unfortunately. Or at least I thought they were minor changes which should influence what negatively, but when I run it now I get error "a specified parameter was not correct." I found this thread saying it was a bug in the previous version, but that must have been fixed. I tried a workaround but I still get the same error. The script works well when I remove the "-OSCustomizationSpec" parameter, but it seems nothing wrong with the file I can manually deploy the virtual machines with the file OSCust from the GUI and the same models. And as I said, it worked well earlier when I used this setting. Any ideas on what "parameter", it's wrong?

  
  

  PSVersion: 4.0

  PowerCLI Version: VMware vSphere PowerCLI 5.5 Release 2 build 1671586
  

  
  

  The script starts the error message:

  New - VM: 2014-07-14 10:13:13 New - VM the functioning of the entity "model" failed with the following message is displayed: "specified a parameter was not correct. . ' spec.identity.userData.computerName '

  Script.ps1:141 tank: 6

  + New-VM-model $Template"

  +                     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: NotSpecified: (:)) [new-VM], InvalidArgument)

  + FullyQualifiedErrorId: Client20_TaskServiceImpl_CheckServerSideTaskUpdates_OperationFailed, VMware.VimAutomation.ViCore.Cmdlets.Commands.NewVM

  And in the GUI:

  Task: Clone virtual machine

  Status: A specified parameter was not correct. spec. Identity . userData.c omputerN soul

  
  

  Below is the part of the script New - VM and OSCust:
  

  New-OSCustomizationSpec-name "PowerCLI" '

  -"Password" AdminPassword"

  -AutoLogonCount 0'

  -ChangeSID: $True '

  -Confirm: $False '

  -DeleteAccounts: $False '

  -Description "only for use with PowerCLI." "

  -FullName $Customer '

  -LicenseMode "NotSpecified" "

  «- NamingScheme «Fixed "»

  -NamingPrefix $VMName '

  OrgName - $Customer '

  -OSType 'Windows' "

  Time zone - 110'

  -'Persistent' type '

  -Workgroup 'WORKGROUP ' | Out-Null

  New-VM-model $Template"

  -Name of the $VMName '

  -VMHost $VMHost '

  -Store data $Datastore"

  -Map $Folder '

  ResourcePool - $ResourcePool '

  OSCustomizationSpec - PowerCLI | Out-Null

  Heck, I'm stupid, I think that it is Monday today!

  Just as you understand, it has something to do with the name of the computer.

  'spec.identity.userData ComputerName'.

  Or more precisely '-NamingPrefix $row.» Nu. Since this is the NETBIOS name, which can contain only letters, numbers and hyphens.

  As previously stated I'm stupid. I had $row. Defined as 'nickey_test01' and underscore name isn't a character allowed. This explains why the script already worked before when I created client VM. Guess I'll have to build in several controls in the script, for fool proof.

  Cheers for the help of Luke.

• The specified parameter was not correct: ".."

  Hello

  I am using VMware vCenter Converter Standalone to virtualize a few physical servers on an ESXi server.

  I installed ESXi 4.1.0 on a new server (quad core 2 processors, 48 gb of ram, a mirrored raid (where is the ESXi software) and a raid 5 for virtual servers).  I've already enabled 64-bit virtualization in the bios of the destination server.

  The first server I want to virtualize is a small server (Nothing mission critical).   The software main is executing is SpiceWorks.  I installed VMware vCenter Converter Standalone 4.3.0 Build-292238 on the source server.

  The error that I'm left with after you run the converter is:

  The specified parameter was not correct: ".."

  Let me guide you through the steps of how I get there.

  Launch of vCenter Converter

  Click on Convert Machine

  Under Select Source Type: Tension machine

  Specify the machine 'this local computer '.

  Next

  Select the Destination Type: VMware Infrastructure virtual machine

  Server: xxx.xxx.xxx.xxx

  user name: root

  password: password for root

  Next

  Name: leave the same...

  Next

  Select localhost.localdomain

  SELECT data store: Data1 (it was created on the raid 5 group, 860,75 1 GB of free space)

  Virtual Machine version: Version 7 of the

  Next

  Check the destination parameter... Check

  Let all the suggested default values / (go play with it more that one I get a working basis...)

  Next

  Summary (see bottom of post for summary)

  Finishing

  Special presentation...

  Then I get the error message

  The specified parameter was not correct: ".."

  The error message ends actually in times of double quotes

  If anyone has any suggestions, I would be grateful.

  Thank you.

  -

  ---

  Summary

  Information source system

  Source type: slot machine tension

  Name/IP address: the machine where works the VMware vCenter Converter Standalone server

  The CPU limit: None

  The network limitation: None

  Destination system information

  Virtual machine name: xxxxx

  Host/server: xxx.xxx.xxx.xxx

  Logged in as: root

  VM folder: None

  The host system: localhost

  List of resources: by default

  Power after the conversion: No.

  Number of processors: 2

  Physical memory: 3584 MB

  Network: Preserve County NIC

  NIC1 connected

  The VM network

  Type of disk controller: Preserve source

  Storage: The Volume of cloning-based

  Data configuration files store: Data1

  Customization of the destination

  Synchronize changes that occur during cloning: No.

  Install VMware Tools: No.

  Customize the guest operating system: No.

  Delete restore points: Yes

  Reconfigure the virtual machine: Yes

  in step 3 you can check to see if all volumes can be copied?  Just to make sure that it is a disk volume to move...

  The error should be something between the two tick marks, which is not double quotes.

  He complains that a value is null, rather than not null.  So, in step 3, make sure that nothing is missing.

  Kind regards

  Jon Hemming, b.SC., RHCT, VMware vExpert 2009
  http://Twitter.com/vJonHemming

  If your question or problem has been resolved, please click the "right answer".  If someone helped him, please click "useful answer.

• vmrun - error: the specified service provider was not found.

  Hello

  I installed vmware server 2 on Gentoo 2008.0.

  Installed versions:

  VMware-server 2.0.1.156745 - r3

  VMware-modules 1.0.0.24

  VMware vix 1.6.2.156745 - r2

  Everything works fine from a remote machine, but if I want to start a virtual machine in the console via vmrun, I get this error message:

  Error: The specified service provider was not found

  Any suggestions how I can fix this problem?

  The problems seem to stem from the fact that you don't have the "vix.libdir" parameter in your global configuration file. Usually, it is located in/etc/vmware/config by the presence of a line like:

  vix.libdir = "/opt/vmware/vix/lib"
  

  If you add to that, vmrun needs to start working.

• Flash Player error: THE SPECIFIED MOUDLE IS NOT FOUND

  I am facing a problem when I open my flash memory

  It is said:

  Rundll

  There was a problem starting

  THE SPECIFIED MOUDLE COULD NOT BE FOUND

  How can I solve this problem?

  Original title: Rundll

  Hello

  Thanks for joining us out on Microsoft Community Forums.

  From your post, it seems that you are unable to access the USB key and it gives you an error: the specified module could not be found.

  1. The USB Flash works fine in another computer?
  2. Have you tried any other USB on your computer?

  You can try the following steps and check the result.

  Method 1: You can try to run the hardware and devices Troubleshooter and check if it makes a difference:

  If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: However, it could be a virus, I would also say that you to download and run the last scan Microsoft security on USB flash and check if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  You can also check out the link below and follow the suggestions of SpiritX MS MVP responded on August 20, 2010:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/specified-module-cannot-be-found/287433d7-330e-4c7c-b0b8-796cd43caeb6

  Let us know if it helps. If you have other questions related to Windows please keep us informed and we will be happy to help you.

• Impossible to rename a folder in COM error "the specified device name is invalid.

  Original title: A picturesque problem!

  Hi dear friends
  I came across a picturesque problem, someone at - it also have problems? : D

  http://seorooz.IR/WP-content/uploads/2014/06/capture.PNG

  Hello

  Thank you for writing to Microsoft Community Forum.

  The error "the specified device name is invalid" is displayed if you try to name a folder with a name that represents a limit of MS-DOS device name.

  The MS-DOS device driver names cannot be used as file names in Windows. As a result, we cannot name as records con, zero, etc.

  Microsoft MS-DOS booked these names for these system device drivers.

  • CON: Keyboard and display
  • PRN: System list device, usually a parallel port
  • To THE: auxiliary device, usually a serial port
  • CLOCK$: the system real-time clock
  • DRAW: Bit-Bucket device
  • A:-Z:: the drive letters
  • COM1: First communications port series
  • LPT1: First parallel printer port
  • LPT2: Second parallel printer port
  • LPT3: The third parallel printer port
  • COM2: Second communication port series
  • COM3: Third serial communications Port
  • COM4: Fourth serial communications Port

  For more information, you can also consult:

  http://support.Microsoft.com/kb/74496/en-us

  Hope the helps of information provided. Let us know in case you need any help/information to windows.

• A virtual machine or the template with the same name is already registered. Server error: the specified key name or identifier already exists.

  Hi all

  I have a 5.5 esxi server just the a virtual machine running at the moment. I try to clone this as shown below:

  http://nchrissos.WordPress.com/2013/04/22/cloning-a-VM-without-vCenter-in-ESXi-5-1-free-edition/

  However, I get the error:

  A virtual machine or the template with the same name is already registered. Server error: the specified key name or identifier already exists.

  I have no vcenter (yet), and it's just the 1 vm. The virtual machine is turned off. I get this error regardless of the name, I said that when I choose "add to the inventory.

  All advice appreciated.

  Thank you

  Oh dear...
  you read bad advice on the internet and then you get also the stupid advice here.

  Ignore both!

  If you want to clone a virtual machine by copying - do it like this:

  Create new virtual machine with the wizard.
  Skip creating a disk for new customers.

  In Datastorebrowser copy the original vmdk to the new dir, which has been created by the wizard.
  Reopen the new VM and edit - assign the vmdk that you just copied.

  The procedure of the blog is not supposed to work.
  Sissine trick doesn't make sense either

• causes VIX/vmrun.exe ' error: the specified version is not found "with WS 8.0.1

  vmrun.exe t ws start "Q:\VMware\REG\REG-XP3 (RC2).vmx"
  Unable to connect to the host.
  Error: The specified version is not found

  I installed in this order:

  
  Workstation 8.0.1

  VIX 1.11.0.18997

  On a Win7 x 64 SP1 box.

  There also the vSphere PowerCLI 5.0.0.3501 installed however this seems to need to ESX and vCenter, so it is useless for me.

  
  Long story short, I need vmrun maintenance tasks such as deleting snapshot which through GUI takes a.) ages, b.) pump lock your workstation / takes focus.

  
  How can I get this working again? I checked the vixwrapper - config.txt and it lists the following:

  # Workstation 8.0.0
  vmdb WS 14 8.0.0 Workstation - 8.0.0 - and-vSphere - 5.0.0
  Player vmdb 14 4.0.0 Workstation - 8.0.0 - and-vSphere - 5.0.0
  WS-shared 14 no Workstation 8.0.0 - 8.0.0 - and-vSphere - 5.0.0
  WS 14 vmdb e.x.p Workstation - 8.0.0 - and-vSphere - 5.0.0
  drive 14 vmdb e.x.p Workstation - 8.0.0 - and-vSphere - 5.0.0
  WS-shared 14 no Workstation e.x.p - 8.0.0 - and-vSphere - 5.0.0

  Thank you.

  I just found this same problem with Player 4.01 exaxt... VMware VIX who uses this configuration file and if the gift ' e versions EXACTLY match it flows without any usable information.

  Add this to your config file and it will work...

  # Workstation 8.0.1
  vmdb WS 14 8.0.1 Workstation - 8.0.0 - and-vSphere - 5.0.0
  Player vmdb 14 4.0.1 Workstation - 8.0.0 - and-vSphere - 5.0.0
  WS-shared 14 no Workstation 8.0.1 - 8.0.0 - and-vSphere - 5.0.0
  WS 14 vmdb e.x.p Workstation - 8.0.0 - and-vSphere - 5.0.0
  drive 14 vmdb e.x.p Workstation - 8.0.0 - and-vSphere - 5.0.0
  WS-shared 14 no Workstation e.x.p - 8.0.0 - and-vSphere - 5.0.0

• Unable to connect to the host.   Error: The specified version is not found

  vmrun-t esx h https://192.168.1.123/SDK u root Pei password list

  Unable to connect to the host.

  Error: The specified version is not found

  Any ideas why it does not work?  It is run on a Windows XP workstation.  The target server is on the local network and running ESXi 4.1.  The vmRun version is 7.1.2 and is installed with Workstation 7.1.2.

  I also tried Ubuntu 10.04 with vmRun from a Workstation 7.1.2 installation.  There, he also fails with the same error.

  Note that ESXi 4.1 is used to test installation is not allowed and is running in demo mode.  Management of the vSphere client works without any problem the same Windows XP workstation.

  Any help would be appreciated.  Thank you.

  You must install the full package of VIX by http://communities.vmware.com/community/developer/downloads. It contains only components to manage the workstation. Please note that I had to install in the VIX 1.10.1 order then Workstation 7.1.2 to get both to work on my Windows 7 computer.

• Using results of actual rate clock by error 'the specified resource is reserved.

  Hello!

  I use DAQmx 9.8, win10 x 64, NI 6221 emulated Council, labview 2012 32 bits.

  I need to define the AO sample clock frequency, check the actual clock rate, calculation based on the new value of pulse rate and write it in the jury for the output. The code example is attached.

  Everything is ok, when I use the command as a timing (as people used to do) during the installation of the task, but when I am trying to set the clock frequency, then number of samples I get "error-50103 that is reserved for the specified resource. The operation could not be performed as indicated. The error occurs after DAQmx Write.vi. I tried to use two calendar controls or a combination of timing and order property node timing with the same result.

  Is that it has no idea how to solve this problem? Probably, there are some more convenient way to get real rates that I don't know.

  I him have not tested yet on real hardware, emulated alone on board.

  Finally, I dindn can't reveal the source of the prolem. It was certainly not related to the synchronisation screw. Just more simple configuration of analog output generated the same problem in this VI, but working without errors when copied to the new file.

  Rewriting all of the project from zero contributed to y for remedy. Initially, I tried to change the existing program of someone else to change the generator stand-alone benchtop to DAC signal generation.

  Now, everything's fine. Due to the software is not complicated it only takes a few hours to rewrite

• In XP, when you try to install the printer, get error "the specified port is unknown."

  See the title of the question.

  * original title - when I try to install the printer, I get the message "the specified port is unknown. This happened after cable tv and cable modem has been installed

  Thanks for your help. I am not a comp read and write to do all this.  here goes

  No printer listed. I deleted all.no ports usbxxx or dot4xxx. several others listed.

  Middle neck is the same. Intel

  the RT is Windows 2000 or xp.

  It's what I expected.

  Usbprint.sys figure 54 times more often in documents and settings. also in nt service pack driver PK. Ditto for usbmon.dll.

  This is not the case.

  1. open Windows Explorer and type C:\Windows\system32 into the address bar.
  2. find usbmon.dll
  3. right click on this file. Select properties, and then click the Version tab. Is - this version 5.1.2600.5512?  If not, is what version?
  4. now, go to the C:\Windows\system32\drivers folder
  5. what version is the usbprint.sys file?

  You have a copy of each file in C:\Windows\ServicePackFiles\i386?  If so, what are the versions of these files?

  If the usbprint.sys and usbmon.dll in C:\Windows\ServicePackFiles\i386 files are identical (or older) versions that the corresponding files in C:\Windows\system32 and C:\Windows\system32\drivers, copy the C:\Windows\ServicePackFiles\i386 files into their appropriate folders.  Then restart.