It is possible to apply again while the watch is opened in read-only mode?

Similar Questions

• 4.0 ai2 - cannot select and copy the code from a package body when opened in read-only mode

  4.0 ai2 - cannot select and copy the code from a package body when opened in read-only mode

  He was connected/buggy. It is not fixed yet. But it will be.

• Generation to EXPLAIN the PLAN on a database that is open in READ ONLY mode

  Hello
  
  I use the Oracle 10.2.0.3 version.
  
  If my database is opened in READ ONLY mode, means that no insert/update/delete operations are allowed here.
  
  During the generation of the PLAN to EXPLAIN this, the PLAN_TABLE registrations for any SQL. But my database is opened in READ ONLY mode, means that no inserts can happen.
  
  So, how can I generate EXPLAIN PLAN for my SQL in this State?
  
  Thanks in advance.
  
  
  
  Best regards
  oratest

  oratest wrote:
  I use the Oracle 10.2.0.3 version.

  If my database is opened in READ ONLY mode, means that no insert/update/delete operations are allowed here.

  During the generation of the PLAN to EXPLAIN this, the PLAN_TABLE registrations for any SQL. But my database is opened in READ ONLY mode, means that no inserts can happen.

  So, how can I generate EXPLAIN PLAN for my SQL in this State?

  You can always do: 'explain the plan in some_table@remote_database' to avoid inclusion in the local database. Unfortunately 10g added an extraction of the sequence of the code "explain plan", and that's where the call fails if you have tried this distant approach on your version.

  Here's an idea that I have not tested. If you configure a link of data to your database from production to the database read-only, you could then do a "explain plan" in the database of production for the SQL statement by changing each object reference in the SQL statement to "object@readonlydatabase". In most cases this will allow the optimizer to recognize the statement as "entirely to distance" and get the optimizer on the readonly database to create the execution plan - which will be then written into the production database.

  Concerning
  Jonathan Lewis

• The Microsoft Documents open as 'read only '.

  Hello

  I'm new on VMware Fusion and running v2.0.1 (128865) on an Intel Mac mini.  I have a vm XP with office 2003 Professional.  Each document that I opened is always read-only.  I have checked the permissions, re-installed VMware Tools, checked the installation of office (under sp3)...

  What have I done wrong?

  Any ideas, help, tips are greatly appreciated

  Thx a lot

  If the source is an optical read only world expect.

  If the source is a shared VMware folder, make sure that the permissions are set read/write & under the Virtual Machine > settings > sharing

  If she a SMB/CIFS check the permissions are set to read & write.

  If that does not cover it then provide detailed information as to the source of the files as well as the permissions are set.

• My iphone is disabled. I can't connect to itunes and icloud without my password.  It is not possible to do so while the phone is off.  What should I do?

  My iphone is disabled. I can't connect to itunes and icloud without my password.  It is not possible to do so while the phone is off.  What should I do?

  The steps here talk about everything that you can do other than take it to an Apple store with proof of purchase.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• the zoom browser constantly. (if u don't have to zoom-in for each unique site and links, and then zoom-in for them again after the closing by opening the browser)

  # zoom the browser constantly. (if u don't have to zoom-in for each unique site and links, and then zoom-in for them again after the closing by opening the browser)

  I haven't seen good eye.

  Install the extension to Default FullZoom Level and set a default zoom level:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/6965

• How to fix the rotation in application as apply just open land scrap only mode in Html5

  Dear team,

  I develop application using HTML5 for Z10.

  How to fix the rotation in application as apply just open land scrap only mode in Html5

  Please help me and give me a link to the documentation for this.

  Kind regards

  HP

  Hello

  You can set the following in your config.xml file

  There is more information available on our developer site -https://developer.blackberry.com/html5/documentation/code_sample_creating_a_bb_widget_config_documen...

• Illustrator CC 2014 stops working when I click NEW, AGAIN from THE MODEL or OPEN.

  Illustrator CC 2014 stops working when I click NEW, AGAIN from THE MODEL or OPEN.  I tried to uninstall and reinstall; I also tried to disable the graphics card.  Help, please!

  Problem solved.  It was a mistake of the printer at the origin of the problem.

• Error: "CHKDSK cannot continue in read-only mode" while trying to perform the disk check

  : Title real: my backup is suddenly not recognized in Windows 7

  A backup I use regularly is currently not recognized - I went through several pages of suggestions without deleting the instructions to format the drive. I did chkd sk/p/r suggestions with this result:

  Microsoft Windows [Version 6.1.7601]

  Copyright (c) 2009 Microsoft Corporation. All rights reserved.

  
  

  F: C:\Windows\System32>CHKDSK

  The type of the file system is NTFS.

  Volume label is Micron disc for backup.

  
  

  CAVEAT! F parameter not specified.

  Running CHKDSK in read-only mode.

  
  

  CHKDSK checks the files (step 1 of 3)...

  11520 file records processed.

  Finished files checking.

  11 big folder files.

  0 incorrect file records processed.

  0 EA records processed.

  0 analysis of the cases handled.

  CHKDSK is checking the index (step 2 of 3)...

  53 percent. (12004 index entries processed 11514)

  Error detected in the $I30 for 5 file index.

  Error detected in the $I30 for 5 file index.

  12004 index entries processed.

  Index verification completed.

  
  

  Errors found. CHKDSK cannot continue in read-only mode.

  Then I tried to reassign the drive letter of the F to h: the display shows the file system is "RAW and the status is healthy, etc."  He doesn't see this as a NTFS format, even if the chkdsk identified it in this way with the correct volume lable, so I know it was to see the right player.  I almost all still on my coomputer - this backup is material that I could go back more old backup drives, but it's the best version of consolicated of my automatic backups of Win 7, so I didn't it wouldn't be pretty.  Am I out of luck?  Is this drive Kaput

  and should I give up on this?

  Thank you

  Hello
  I suggest you contact the manufacturer of the USB to the backup drive then try formatting the USB and check if the problem persists.

• DataGuard open read only mode: PING [ARC2]: unable to connect before Heartbeat "keeps." The error is 88.

  Hello

  I created a data guard with 1 physical and 1 relief database.

  Database: 11.2.0.4 - Enterprise edition

  Everything is OK, if the wait is still in State of Mount.

  but.

  When I want to open the day before in read-only mode, log shipping is stop.

  I found az error in the primary newspaper:

  PING [ARC2]: Unable to connect to the standby Heartbeat "keeps." The error is 88.

  
  

  The newspaper of Eve:

  alter database open read only

  AUDIT_TRAIL initialization parameter is changed to OS, as DB is NOT compatible to the database open with read only access

  Wed Dec 03 12:02:02 2014

  SMON: enabling cache recovery

  Dictionary check start

  Verification of the complete dictionary

  Database character set is AL32UTF8

  No Resource Manager plan active

  off replication_dependency_tracking (no replication multimaster async found)

  Physical standby database opened for read only access.

  Completed: alter database open read only

  Wed Dec 03 12:02:03 2014

  Mo 4977 db_recovery_file_dest_size is 2.29% used. It is a

  user-specified limit on the amount of space that will be used by the present

  for the files related to the recovery of databases and does not reflect the amount of

  space available in the underlying file system or ASM diskgroup.

  Thanks for your help and sorry for my bad English.

  LACI

  Oracle error: ORA-00088

  Error description:
  Cannot be executed by the shared server

  Cause of the error:
  Debug command issued on a shared server.

  Action:
  Run the command again using a dedicated server.

• How to make all the fields on one page read only (for the recipient) without having to make each field read-only?

  How to make all the fields on one page read only (for the recipient) without having to make each field read-only?

  Hello Jmbtexas4,

  By default, you will need to individually click on the fields of the form and check the 'read only' and save it. From now on, it is not possible to select all together and make the changes.

  -Usman

• The selected data source is read-only

  Someone knows how to solve this 'problem '.

  The selected data source is read-only. You cannot change the view configuration.

  Thanks in advance.

  My solution to this has been reset in the field of data and download information again. I know that it is not best practice but it works

• Error: unable to copy to the output directory, destination is read-only

  Hello...
  
  Help, please...
  
  I have a project that I just check in the files + files to harvest. After I deleted all the elements I have just check-in, I again opens the project in Jdeveloper, but when I recompile and run I hit this error:
  
  Error: unable to copy to the output directory, destination is read-only
  
  Help, please... I can't do anything on this subject as it is to show read-only... When I try to compile the java files even case:
  
  Error writing class java.io.IOException: cannot create output file
  
  
  Help, please...

  Hello

  In Jdeveloper, right-click on the project and go to the project properties menu

  In the content of the project, you can see the output directory path field,

  go to the path and give all the permissions in the folder

  I'm not sure what harvest is, but check if this helps you

  Concerning
  Ravi

• Possible to make an element editable for some users and read-only for others

  Is it possible to make an element editable for some users and read only for others?
  
  I was able to achieve by catches of the select statement that I used to define an authorization scheme, placing in the State of read-only element. However, I would simply refer to the authorization scheme to use caching and to help keep things cleaner for future maintenance.
  
  Is it possible for a system of authorisation under a condition similar to the way point another element can be referenced by preceding with two reference points (e.g.: P1_First_Name)?

  I accomplished this in one of my applications by setting the value of a hidden Page 0 item on connect, for example P0_ACCESS_PRIVILIGES, and then use the feature 'Read only' integrated into the APEX for each article that I don't read for some users check the value of this element.

• Error: "CHKDSK cannot continue in read-only mode" when you try to run it on the E: drive.

  Original title: CHKDSK does not work on my Windows 7 laptop

  I'm trying to run a CHKDSK on my external Hard Drive E: but everytime I try to CHKDSK E: in the shell, all I get is

  "This type of file system is NTFS.
  Errors found. CHKDSK cannot continue in read-only mode. »
  (That's all I get, nothing in between)
  I tried to make the Tools section of error checking, but it does not work there either...
  If this is a problem with the operating system, I don't have a Windows 7 disc because my laptop came with it pre-installed
  So, what should I do?

  Hello Rayzorexe,

  Thanks for the response back.  You are able to start your computer and get the recovery options?  From there, you can run "Command Prompt" and I want to know if you are able to run Chkdsk from there successfully.

  Are you the same response from the commands below:

  Type 'chkdsk e:' in the command prompt. Press 'Enter' to run the utility to check the disk in read-only mode. He locates errors but does not fix the

  Enter 'chkdsk e:/f' in the command prompt. Press 'Enter' to run the disk check and correct errors without analyzing bad sectors.
  

  Type 'chkdsk e:/r' in the command prompt, press 'Enter' to do a thorough analysis of the sectors and files and repair any problems found.
  

  Recovery options:

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7