the source at the time text value

Similar Questions

• use the time stamp value find value Y in another waveform

  Hello, there, I'm using labview 2013 sp1. I'm sorry that I can't use a picture to describe the problem.

  The wizard sampling DAQ 2 waveforms of 2 channels to HAVE

  Want to use mounted on board one of the waveforms as the triger to get the value of Y to another waveform (as was done with an oscilloscope)

  I tried method 2:

  1. the useto separate a waveform to and use to get the time of adjustments

  2. always use

  and use to get the timestamp.

  are - this method works?

  the problem is how can I use the value of time I've learned very well the value of Y in other waveforms?

  Thank you much in advance.

  I'm sorry you use screw Express, and I'm even more sorry that you are using the dynamic data type.  Using these are not your fault, it's that NEITHER recommend for new developers, but you tend to not have as much control then you type using more stringent data and write the code yourself.

  Using Split signals you can withdraw all of your signals since the type of dynamics and process data of each.  Don't know why you would use signals select but which, in my opinion, they do the same thing.  Then, you use DDT to to get your data into a format that is more useful.  Select the Conversion of a single waveform.  The explanation I gave in my previous post is valid.

  Joined a VI that does what you want.  You can see that once you have a waveform and its components, you can do a much better job.  Like finding the Min and Max of a wave by using table functions.  It searches the first place where AI0 went above your trigger and then gets the value that AI1 was at this same level, which will be at roughly the same time.  Don't forget not that served it one after the other, so no two samples will be taken at the same exact time for most of the DAQ cards.  Few are simultaneous sampling.

• Dynamically add the instanceManager text value to instanceManager another

  Hello

  I have a dynamic form that has two subforms with instanceManagers. One is called options, and another description. Subform 'options' has a button that adds an instance both "_options" and «_description» InstanceManagers

  I click the button twice so I have three instances of each. Each instance of "_options" has a field OPTION, and each instance of '_description' has a DESCRIPTION field. I want to write code that will automatically set the text value of the OPTION to the value of the DESCRIPTION text.

  example:

  -options

  -OPTION (input field)
  

  -descriptions

  -DESCRIPTION
  

  Click

  Click

  -options

  -OPTION (1)(input field)

  -OPTION (2)(input field)

  -OPTION (3)(input field)
  

  -description

  -Description (1)(input field)

  -DESCRIPTION (2) (field)

  -DESCRIPTION (3) (field)
  

  fill option fields

  -options

  -OPTION (1)(rawValue: the soup is good)

  -OPTION (2)(rawValue: soup really sux)

  -OPTION (3)(rawValue: soup is ok)
  

  and here's my problem - how do I get these values for the other instanceManager? I have a code that does not work, but I don't want to offer something. Please, help me, I am struggling with this instance of reference bs for awhile

  You must use xfa.resolveNode to analyze the number of index levels.

  I just did a quick test with a few tables on the output of a field event in Table1, I put a corresponding field in Table2 to the same value. Works the same with subforms.

  xfa.resolveNode ("Table2.Row1 [" + this.parent.index + "]"). TextField1.rawValue = this.rawValue;

  Depending on how many levels deep into the repeating subform your domain is that you will need to play with the 'this.parent.index' to get the path to the repeating subform (this.parent.parent.index, etc.).

  Hope that's what you're looking for!

• How to increase the time-out value for more than 15 seconds?

  Find a web page expires at 15 seconds. I want to set the timeout for a longer period of time. I don't find a place to do this in the Options. When I go to full pages, I want to continue to try more rather than keep hitting the Try Again button.

  The parameter for which is not in Firefox, it must be changed in Windows.

  http://drewthaler.blogspot.com/2005/09/changing-DNS-query-timeout-in-Windows.html

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\DNSQueryTimeouts
  Multiple string: '0 1 2 2 4 8'-> "4 8 8 16 32 0".

• smart camera of the trigger of the time-out value of the error - VBAI 3.6

  Hello that tal?, el tema are that I have a problem with the Smart camera're tengo una fotocelula conectada has the patilla of trigger and (2), el u Trigger-(12) masa in las patillas del conector DB15 of the smart camera para as cuando PASE una pieza realice the fotografia. The cuestion are el solo time-out error me already poner 60000 ms, y for example, so una pieza soon en pasar 60000 ms en el paso of the closing of imagen mas me pone time-out error, y sigue por el diagrama of blocking como if would Fall the imagen. In principio imported me that salga el time-out error, pero me gustaria that esperase has the following pieza sin avanzar por el diagrama of blocking, not so to me explico very well.

  If alguien tiene alguna idea como el problama delivery could be lo agradeceria mucho.

  Cordially, is muchas gracias of photos. David.

  Hey David,

  entonces Perfecto. If the respond you vale marcala como tal in el foro o con UN kudo en knew defecto para as other users themselves can the answer is beneficiar.

  Duro con ello!

  Jesus.

• Increase the time-out value of external WF stubs in vRA 6.2 device?

  The stubs of external workflow (BuildingMachine, MachineProvisioned, etc.) are defined to use a time-out of 30 minutes by default. It seems that other people change delays via a XML configuration file (see "example XML configuration file" in this post: Creation of Workflows for change state), but all of the examples use a Windows Setup and the file does not exist in the device of vRA.

  Does anyone know how to set timeouts, perhaps through custom properties or something?

  Thank you.

  Someone else has this problem, I found the file. The XML file is the server of IaaS in the following location: C:\Program Files (x86)\VMware\vCAC\Server\ExternalWorkflows\xmldb\ExternalWFStubs.xml

• The time-out value for the Photos in slideshow

  My client wants to put pictures of their advertisers in their slide show, but some customers use pictures that are time sensitive, i.e. 'Deal valid this Saturday only'. Is there a widget or add-on that allows me to set an expiration date for a photo in a slideshow where I have, for some reason, cannot be reached to remove it?

  Thank you!

  There is no way currently to do this with only Muse. It would be a good widget. Maybe on the head to www.musewidgets.com and demand. The request goes out to third-party widget providers and maybe one of them will create it.

• Downloads several times the time-out value.

  I downloaded the program stub (several times), started the 'install' that downloads the actual program... and the download expires every time!  It's very frustrating.  It happens on my poor little laptop and my office muscular exactly the same way.  I have a cable broadband ' net connection, so there is no reason to expire.

  Download and run the installation program http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_header offline (to the title of the Progress bar hangs...).

• How TEB can remember the input text value?

  Hi all

  I wanted to know if there is a way a published course may recall the text that has been typed in BER even after the re-opening of the course.

  Simply put: html course Open-> typed in TEB {Hello}-> exit course-> classes-> reopen TEB appears {Hello}.

  Best regards

  Mirza

  I don't think there is another way, unless an expert Javascript has a solution.

• How to set the time-out value for a namedcache programmatically?

  I have a cache named with near cache configuration and no expiration set in the cache configuration. The backup plan that is a distributed system has a policy of expulsion of limited size, but no expiration. I have an algorithm to determine the timeout of this cache named at run time. How can I adjust this delay on the named cache programmatically?
  
  Thank you
  Sairam

  Hi Sairam,

  You need get the plan of support for the cache and set the expiration on the support plan; assuming that the storage card is supported by the expiry.

  For example:

  NamedCache cache = CacheFactory.getCache ("test");

  CacheService service = cache.getCacheService ();
  DefaultConfigurableCacheFactory.Manager MDB = service.getBackingMapManager ((DefaultConfigurableCacheFactory.Manager));
  Map of bm = bmm.getBackingMap ("test");

  If (WB instanceof ConfigurableCacheMap)
  {
  System.out.println ("timeout setting");
  (WB) .setExpiryDelay (100000) (ConfigurableCacheMap);
  }

  -John

• How to configure esxi "change the time tech support"?

  Is it possible to set the time-out value to change tech support timeout in esxi?

  You can also try following command

  Get-VMHost | Game-VMHostAdvancedConfiguration - UserVars.TSMTimeOut name-value 1800

  This will put it to the negotiations 30 minuutes, above value is in seconds

  Concerning

• Why the text in the scrolling text blocks become pixelated when exporting an iPad?

  Working on an application in CS6, and when I saw the content on my iPad all content looks like crystal clear except interactive images. Any interactive image, whether a scrolling text box or a drawer, was released as a bitmap, any vector content (most of the time text). He looks terrible. I have the vector option selected in the scrolling image option in the Panel inlays of folio. Is it possible to get the interactie management clearly would be wonderful. Any thoughts?

  The vector control was introduced in v23. Open the properties of Folio and check the version number of the spectator. It should be v23 or later version. If you update the version of folio Viewer, update the article as well, and should no longer be pixelated.

• Is it possible to display the dynamic value in the ToolTip? I tried: this.assist.toolTip.value = this.rawValue; for a text field 'property MouseEnter', but it does not display the current raw value. It displays a previous raw value of the field... Guilty

  Is it possible to display the dynamic value in the ToolTip?

  I tried:

  this.assist.toolTip.value = this.rawValue; for a text field on 'ownership' MouseEnter

  but it does not display the current raw value. It displays a previous raw value of the field...

  I wrote 'YYYY', but is not displaying on the first mouseEnter event

  

  When I show event mouseEnter for the 2nd time it gives good value.

  

  Now, I changed the "BBBB" value but the first mouseEnter event it displays the value previous i.e. "YYYY."

  

  I found the solution. I wrote the script ("this.assist.toolTip.value = this.rawValue ;") on 'property MouseEnter' but the need to write the script to the "Output" of the field event. ")

  

  Thank you.

• Layer of Source text a link to the external text. (no code in doc!)

  I saw a link to text with snippets of code inside documents.

  This means that the external text document must contain pieces of scripts.

  I would like to make a link to txt (or csv) documents that contain no code.

  Total noob users must be able to link a text of an After Effects project.

  I have a Web site data receiver Exporting CSV values.

  It would be ideal that After Effects can hoover the text and put some pieces in some source texts.

  We are talking about here auto sports cards.

  Is this possible without adding code to a text dump?

  Or is it simply impossible?

  I solved it by using Expressions.

  In the JavaScript reference Guide, there are a lot of usage of the word VAR as the first word in a line of code.

  Seems to be what does not include AE.

  When I program without it, many commands work fine.

  Damage data Web site continues to change its structure.

  Him copy / paste / expression method worked fine for a day and then I went to the square.

• Change the source file of the insert text with a script

  I'm looking for a way to replace existing-insert text in a document with the contents of another file (by reference), using scripts. I have a document c:\referer.fm, in which there is an insert text which the source file is: c:\A.fm

  I also have c:\B.fm, and now I want to change referer.fm so that is no longer the overlay of text contains the text of A.fm, but the B.fm.

  I tried this:

  var doc is app. ActiveDoc;

  var textinset is doc. FirstTiInDoc;

  var pathtosource is textinset. TiFile;

  pathtosource = "c:\B.fm";

  textinset. UpdateTextInset();

  But it does not work. I guess that the "pathtosource" parameter can be done this way. If someone knows a way to do it, I would greatly appreciate your help!

  David

  Hello David,.

  You do not manipulate the text overlay, but a copy of the file in the text box. Your "pathtosource" parameter is a local copy of the property that you read from the actual text insert.

  Try this code instead:

  var doc is app. ActiveDoc;

  var textinset is doc. FirstTiInDoc;

  textinset. TiFile "c:\\B.fm".

  Note that the backslash must be escaped with the backslash to make it work in a JavaScript string. To make your script Fail-Safe, test the name of file textinset before changing. You do not have the textinset that you expect to have, as might also be INSET text on master pages and reference. All inserts text are in a single linked list.

  Also, update the text tagging along after that changing the path may not always work, as compared to FM, last changed the file date text inset with the last time that the textinset has been updated. To force the FM to update the textinset, you must include the following line of code after changing the filename text inset:

  textinset. LastUpdate = 0;

  Then, you can call the UpdateTextInset() method and it will work.

  Good luck.

  Jang