the sreen join dim after upgrade from win7 win7 ultimate

Similar Questions

• In the 8.1 Fusion after upgrade from Windows XP Pro to Windows 7, the NIC cannot connect to the net.

  Looking for the right place to post, so if my post does not belong here, please let me know where.

  The problem:

  Updated to 8.1 Fusion Fusion 7 where I had a Windows XP Pro. After the merge upgrade I have upgraded to Windows 7 and followed the steps in the video by Stephen Gardner based on "upgrading a virtual machine VMware Fusion of Windows XP to Windows 7 (1015396).

  After the removal and the reinstallation of the network card I have no network connection.

  I tried to disable the Windows Firewall on the virtual machine and I gave permission to Fusion App and start App to run in the Norton Firewall on Mac.

  I uninstalled and reinstalled VMware tools and tried different settings for the network card, but nothing gave me the connection to the network

  Anyone else has this problem, or can tell me how to fix?

  Thanks in advance.

  Fusion 8.1.1 upgrade solved the problem.

• While Windows anytime upgrade from Win7 Home Premium to Win7 Pro received the notice that failed.

  Original title: upgrade Express failure.

  I'm doing an anytime upgrade from Win7 Home Premium to Win7 Pro. I get a notice that failed and get back to home premium.

  Any thoughts would be appreciated.

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  -------------------------------------------------------------------

  (A) if at any time the upgrade fails: run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  --------------------------------------------------------------------

  (B) If Internet Explorer is not configured as default web browser,
  you need to make sure and try the Express upgrade.

  --------------------------------------------------------------------

  Only one solution was either by picking up the Internet
  and removal of SP1 - or a combination of both. Then re-installation of SP1
  Save this method for a last resort.

  --------------------------------------------------------------------

  (C) you get a PIN number with the "Anytime Upgrade", if yes enter the PIN here to obtain a product key: https://windows.getmicrosoftkey.com/

  Support for your product key: https://windows.getmicrosoftkey.com/Home/Support

  --------------------------------------------------------------------

  (D) stop and restart your computer.

  (1) implementation of the reinforced system - method #2 tool (download and run the tool: "Checksur.exe")
  http://support.Microsoft.com/kb/947821
  (System resources, such as file of data, even in the data memory and registry data, can develop inconsistencies during the lifecycle of the operating system. The system update tool attempts to resolve these inconsistencies).

  (2) disable any security software before attempting to upgrade

  (3) disconnect external devices of unneccesarry.

  -------------------------------------------------------------------

  (E) if still Anytime Upgrade fails, turn off User Account Control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4 restart the computer

  5. repeat the process "Anytime Upgrade"

  To start the upgrade process:
  Click on start/search and enter the words: Express upgrade
  Then, in the list of the search results, click on "Windows Anytime Upgrade".
  Then follow the prompts on the screen anytime upgrade.
  Basically, all you need to do is enter the Windows 7 upgrade product key.

  Another method:
  (Located at the top right) Start/Control Panel/small icons option / click the "Windows Anytime Upgrade".

  -------------------------------------------------------------------

  (F) if it continues to fail, try the following 3 methods:

  Method #1
  (1) run Chkdsk and see if it helps.
  Click Start / type: CMD and right click 'CMD' and select 'run as administrator '.
  At the command prompt, type: chkdsk /f /r
  Restart your system, hard drive of your computer is analyzed to find errors and will try to correct them.

  (2) run the Memory Diagnostics to look for problems with the system hardware. Type of memory in start search and press ENTER to open the memory diagnostic tool open. Click restart now and check for problems. Your computer will restart and will start the diagnostic program. Please note the reported errors.

  Method #2
  1. click on start, type: "msconfig" (without the quotes) in the box and then press the ENTER"" key.

  User account control permissions: If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under "Selective startup", uncheck the "Load Startup items".

  4. click on the 'Services' tab, click to select the box "hide all Microsoft Services" and then click on disable all.

  5. click on 'OK '.

  6. When you are prompted, click "Restart."

  7. once the computer has been restarted, check if the problem is resolved.

  Method no. 3
  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  -Anytime Upgrade may not work for all versions of Windows-

  Note: Retail 'Full' or 'Upgrade' product keys will work when you use the Express Upgrade feature.
  Upgrade Express 'can' not work (check with the manufacturer of the computer support team) for users who have the OEM and integrators systems product keys, this applies also to the VL (Volume License)-MSDN Academic Alliance (MSDNAA) / DreamSpark or pedagogical keys that does not / do support the Anytime Upgrade option. KMS users consult your administrator before attempting to perform an Express upgrade.

  J W Stuart: http://www.pagestart.com

• After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged as an administrator, but cannot connect to the internet using the standard account. How to fix this?

  After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged in as an administrator,

  but unable to connect to the internet using the standard account.  I have the latest version of the Solution Explorer.

  How to fix this?

  Glad to hear it.

  If the problem is resolved, mark the message as response, then it'll be useful for people with similar/identical problem.

• 8500 a909n all-in-one: could not find a way to install the HP Solution Center after upgrade to win 10

  Grateful for help in finding a way to install the HP Solution Center after upgrade win10.  The installation CD original will not auto-run and when seteup.exe forced to run from the DVD, offers 'output' as the only item on the menu.  The HP support web site offers only the "HP Print and Scan Doctor for Windows" I have installed and tried to run several times.  Pretty frustrating.  Prints OK from normal applications, but am really struggling to analyze.  Any help appreciated.

  I have a 8610 who worked during the first weeks perfectly under windows 8.1.

  After the Win 10 update, it does not work.  The installer who "sees" the printer on the wireless network, impossible to install drivers or programs.

  Hate to say it, but I think we're out of luck until HP fixed their software.

  Very ironic because they don't have that tell of these printers are compatible with Windows 10 messages.  Technically, that's true; It is their software that isn't.

• Do we need to key in the product key when we upgraded from windows vista to windows 7?

  After upgrade activation key

  Do we need to key in the product key when we upgraded from windows vista to windows 7?

  When you install Windows 7, you must enter a key within 30 days to activate it. If you do not want to enter the key during installation:

  On the page to enter your product key, do not enter your key and uncheck the "Automatically activate when online" then click OK/next to complete the installation.

  Activate Windows 7 on this computer

  http://Windows.Microsoft.com/en-us/Windows7/activate-Windows-7-on-this-computer

  Installation and reinstallation of Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

• Microphone does not work after upgrade from Vista Home Premium to Win 7 Home Basic-Sony Vaio VGN-NS25G

  Microphone does not work after upgrade from Vista Home Premium to win 7 Home Basic Edition. Laptop model Sony Vaio VGN-NS25G, bought in India

  My built-in mic not working anymore after the upgrade from Vista Home Premium to win 7 Home Basic Edition. Model laptop Sony Vaio VGN-NS25G was bought in India. I have taken the loacl Sony Service Center and they said that Windows 7 drivers for the microphone Sony was not yet available. They mentioned that the only way to fix the problem was to upgrade to Vista. Is this true? Where can I get these drivers for the microphone, and they are not available, when will they be available?

  Hello

  Method 1.
  Interestingly, I found the drivers for Windows 7 for this particular model of Vaio. Here is link thye:
  http://www.Sony-Asia.com/support/download/362654/product/VGN-ns25g/sectionfirst?subpage=detail

  I suggest updating all your drivers from the link above and drivers Realtek especially.

  Method 2. Set the default Microphone.

  Once the drivers installed to check if the microphone is the default value, here's how:

  Exercise the functions mentioned below to adjust the Microphone as default:
  1. Click Start and click on Control Panel.
  2. click on sound, then a new window will open.
  3. in the new windows, click on the 'Registration' tab and right click in the window and click Show disabled devices.
  4. now check if the Microphone is listed there and right-click on it and choose activate.
  5. turn highlighted that Microphone and click "set as default".
   
  For more information see the articles below:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-us/Windows7/recording-audio-in-sound-recorder-frequently-asked-questions

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• What is the best operating system to upgrade from Vista? Should I buy Windows 7, 8 or 8.1?

  I have Vista 32 bit Home Premium.It does not support Windows Mail.Which is the best operating system to upgrade from Vista? Should I buy Windows 7, 8 or 8.1? I do not have a touch screen system, my system is five years old.

  Original title: upgrade

  Hello WilliamPopat,

  If you want to buy an another operating system, you would do better to buy the latest version, i.e., Windows 8.1 it doesn't matter that you don't have a touch screen like Windows 8.1 will work just as well on a desktop PC / laptop normal.

  However, before rushing and buying a copy of Windows 8.1, I suggest that you look at this link http://www.eightforums.com/tutorials/11885-windows-8-upgrade-assistant-download-run.html the link above shows Windows 8 Upgrade Wizard you can download (free) and allows you to check that your PC is compatible with the latest version of Windows.

  According to me, one of my office machines is around 5 or 6 years and Windows 8/8.1 works fine on it.  However, it is best to check your own machine with the wizard upgrade just in case.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• upgrade to win7 ultimate (win7 home pro) I have to disable MSE?

  Upgrade to win7 ultimate MSDN Version (OEM win7 home pro) I have to disable MSE?

  I expected to get a Yes or no answer (e.g. YES, they are all three from MicroSoft product, that's why they work perfectly without disable MicroSoft Security Essentials; or NOT, they are all three EM produsts then, of course, you must disable MSE!)

  It shouldn't be a problem when you upgrade.

  In case you are facing any problem after upgrade, uninstall MSE and restart your PC and download and reinstall. However in the case of normal use, it shouldn't be a problem.

• Re: NB200-134 - touch FN does not work after upgrade to Windows 7 Ultimate

  My NB200-134 of FN keys does not work after upgrade from Windows 7 starter to Windows 7 ultimate. I tried to install all the drivers found on the Web from Toshiba website for my lappy but it still does not work.

  Help please

  Hi asalamk,

  The FN keys are controlled by value added and Flash Cards Support utility package. I think you forgot to install these tools

  You should recheck the Toshiba page and download these two tools. Start with the installation of the package of added value, and then restart your laptop. After this utility installation of Support Flash Cards. Reboot once again and all the FN buttons should now work correctly.

• After upgrade from Windows 7 to Windows 10 and following, less then a return to Windows 7, receives the message that Windows 7 is already false

  Original title: Win7 - Win10-Win7

  "after the upgrade from Windows 7 to Windows 10 and following, less a return to the Windows7, I get a message that Windows 7 is already false."

  Hello

  Thanks for the update.

  I suggest you refer to the articleof André Da Costa in the link mentioned for upgrade to windows 10:

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/frequently-asked-questions-Windows-10/5c0b9368-a9e8-4238-B1E4-45f4b7ed2fb9

  I hope this helps.

  Kind regards
  Anusha

• Not able to scan with the preview after upgrade from Mac OS Sierra...

  After upgrading to Mac OS Sierra. I'm unable to use the preview to scan.  Before this upgrade, it worked fine.  The HP scanner software does NOT work something like OS 10.8 or 10.9.  Preview worked perfectly so far.  If anyone knows how to solve this problem, your contribution will be greatly appreciated.  Thanks in advance.

  Have you tried scanning with Capture of Image instead? It worked for me.

• How to set up * application and the workspace of static files after upgrade from 4.2 to 5.0?

  Hello.

  I just upgraded from 4.6 to 5.0 on Windows 7 64 bit.  ADR 2 and Tomcat running.  The APEX and my app runs.  Images of the APEX are OK.

  Problem: Application and do not display images of working space.

  Here are the different paths:

  • C:\apache-Tomcat-7.0.59\webapps\i
  • C:\APEX\images

  I copied the content of the APEX webapps\i images directory to the tomcat directory.

  I ran the two flavors of the loading image script, and each completed without error.

  • SQL > @apxldimg.sql c:
  • SQL > @apex_epg_config.sql c:

  I am able to log in administrator mode or developer APEX, and everything looks very good and works well.

  I can't connect to my request and it works, but the images, for example, the logo is not displayed.  The application CSS file is not currently in use.

  The source of the page shows that in the head of <>, where "pva" is the name of workspace:

  "" < link rel= "shortcut icon" href= "pva/static-files-not-configured/files/static/v4Y/eprentise_favicon-32x.png" type= "image/x-icon" / > "

  < link rel =" style sheet " href =" PVA/static-files-not-configured/Files/static/v4Y/epr_4_6.CSS " type of =" text/css " />

  This is the logo of the hgroup > < body > <

  "" "< a href="f? p = 520:1:1212525121720" id="uLogo"> < img src="pva/static-files-not-configured/files/static/v4Y/eprentise_default-logo.png" alt="eprentise demo" title= 'eprentise demo" height= "50" / > < /a > "

  #WORKSPACE_IMAGES # = pva/static-files-non-configured/files/static/v4Y /, which is considered in the places above.

  
  

  #APP_IMAGES # = pva/static-files-non-configured/520/files/static/v2Y /, where the application_id is 520.  These images are not either

  
  

  My understanding is that the images of the workspace and the app are not stored in the file system in the results directory.
  

  
  

  Advice or a pointer to the documentation on how to configure static files for application and space images of work and for the application CSS file?

  
  

  Thank you

  Skip
  

  Hi Skip,

  If you are using ADR the next chapter in the ADR of the installation guide part is important to you. https://docs.Oracle.com/CD/E59726_01/install.50/e39144/listener.htm#HTMIG29472

  In particular, the following note in "on the configuration of the RESTful Services.

  RESTful services ask Oracle 2.0 or subsequent REST Data Services. RESTful Services configuration is necessary when upgrading to Oracle Application Express version 5.0 and RESTful Services were not configured in a previous version.

  Concerning

  Patrick

  Member of the APEX development team

• .PS generate a blank PDF file after upgrading from Acrobat Pro 7 to 9 of the file

  Hi all

  I searched for it in vain, so I come to you now in desperation. My boss asked me track down this error and I have to be honest, I'm a little green with Acrobat Pro. So come the situation I know. My Department, usually use a .ps file to generate a publication as a PDF of the other .ps files. We operate on a network share (drive P :) on Windows XP SP3 machines with the latest updates.

  In Acrobat Pro 7 we can double-click the .ps file that executed the code through Adobe Distiller and a finished PFD at the same file below name would exit in the host directory. But now, after upgrading to Adobe Acrobat 9, this process produces a PDF file with all bookmarks appropriate and no content.

  %!
  % Program postScript for distilling and combine multiple PostScript files.
  % During the incorporation of subsets of fonts, it is strongly recommended that you use this technique
  % to distill several subset of police for one of the PS file is used for each policy.

  /prun {/mysave save def % performs a backup before running the PS file}
  DUP = RAS % watch running PS file name
  RunFile built in distilling procedure calls %
  Claire cleardictstack % cleans up after PS file
  mysave restore % restorations save level
  } def
  [/Author (user)
  / CreationDate)
  / Creator)
  / Title (title)
  / Topic (Subject)
  / Keywords (words)
  / DOCINFO Pdfmark
  [/PageMode
  / UseOutlines
  / DOCVIEW pdfmark
  [/ Page 1]
  / View [/ XYZ null null null]
  / Title (cover Page)
  / OUT pdfmark
  [/ Page 2]
  / View [/ XYZ null null null]
  / Title (Page 1)
  / OUT pdfmark
  [/ Page 3]
  / View [/ XYZ null null null]
  / Title (Page 2)
  / OUT pdfmark
  [/ Page 4]
  / View [/ XYZ null null null]
  / Title (Page 3)
  / OUT pdfmark
  [/ Page 5]
  / View [/ XYZ null null null]
  / Title (Page 4)
  / OUT pdfmark
  [/ Page 6]
  / View [/ XYZ null null null]
  / Title (Page 5)
  / OUT pdfmark
  [/ Page 7]
  / View [/ XYZ null null null]
  / Title (Page 6)
  / OUT pdfmark
  [/ Page 8]
  / View [/ XYZ null null null]
  / Title (Page 7)
  / OUT pdfmark
  [/ Page 9]
  / View [/ XYZ null null null]
  / Title (Page 8)
  / OUT pdfmark
  [/ Page 10]
  / View [/ XYZ null null null]
  / Title (Page 9)
  / OUT pdfmark
  [/ Page 11]
  / View [/ XYZ null null null]
  / Title (Page 10)
  / OUT pdfmark
  [/ Page 12]
  / View [/ XYZ null null null]
  / Title (Page 11)
  / OUT pdfmark
  [/ Page 13]
  / View [/ XYZ null null null]
  / Title (Page 12)
  / OUT pdfmark
  [/ Page 14]
  / View [/ XYZ null null null]
  / Title (Page 13)
  / OUT pdfmark
  [/ Page 15]
  / View [/ XYZ null null null]
  / Title (Page 14)
  / OUT pdfmark
  [/ Page 16]
  / View [/ XYZ null null null]
  / Title (Page 15)
  / OUT pdfmark
  [/ Page 17]
  / View [/ XYZ null null null]
  / Title (Page 16)
  / OUT pdfmark
  [/ Page 18]
  / View [/ XYZ null null null]
  / Title (Page 17)
  / OUT pdfmark
  [/ Page 19]
  / View [/ XYZ null null null]
  / Title (Page 18)
  / OUT pdfmark
  [20/page
  / View [/ XYZ null null null]
  / Title (Page 19)
  / OUT pdfmark
  [/ Page 21]
  / View [/ XYZ null null null]
  / Title (Page 20)
  / OUT pdfmark
  [/ Page 22]
  / View [/ XYZ null null null]
  / Title (Page 21)
  / OUT pdfmark
  [/ Page 23]
  / View [/ XYZ null null null]
  / Title (Page 22)
  / OUT pdfmark

  prun (p:/ps/pdf/cover.ps)
  prun (p:/ps/page2.ps)
  prun (p:/ps/page3.ps)
  prun (p:/ps/page4.ps)
  prun (p:/ps/page5.ps)
  prun (p:/ps/page6.ps)
  prun (p:/ps/page7.ps)
  prun (p:/ps/page8.ps)
  prun (p:/ps/page9.ps)
  prun (p:/ps/page10.ps)
  prun (p:/ps/page11.ps)
  prun (p:/ps/page12.ps)
  prun (p:/ps/page13.ps)
  prun (p:/ps/page14.ps)
  prun (p:/ps/page15.ps)
  prun (p:/ps/page16.ps)
  prun (p:/ps/page17.ps)
  prun (p:/ps/page18.ps)
  prun (p:/ps/page19.ps)
  prun (p:/ps/page20.ps)
  prun (p:/ps/page21.ps)
  prun (p:/ps/page22.ps)
  prun (p:/ps/page23.ps)

  
  % INSTRUCTIONS
  %
  % 1. Find all PostScript files in distiller.
  %
  % 2. Make a copy of this file and give it the name you want to have as a prefix
  % for the rΘsultat file. For example, you can name this file MyBook.ps.
  %
  % 3. Include a line for each PostScript file to run by using the syntax of path
  % appropriate for the Acrobat Distiller platform running.
  %
  % Macintosh path syntax: prun (Macintosh HD:Folder:File.ps)
  % Windows path syntax: prun (c:/mydir/file.ps)
  % UNIX pathname syntax: (. / mydir/File.ps) prun
  %
  % Note: the syntax for Windows may seem strange, but the double escapement of the
  % backslash is required to use filenameforall.
  %
  % 4. Distill the file on the computer running Acrobat Distiller.

  Once the process is 'done' the following log file is generated.

  Acrobat Distiller 9.4
  Start: Monday, October 18, 2010 at 13:32:05

  Adobe PostScript software version: 3018.101

  Start time: Monday, October 18, 2010 at 13:32:06
  Source: publicationtest.ps
  Destination: C:\Documents and Settings\User\Desktop\usfdtest.pdf
  Adobe PDF settings: C:\Documents and Settings\User\Application Data\Adobe\Adobe PDF\Settings\High quality Print.joboptions
  c:/ps_script/cover.PS
  c:/ps_script/TOC.PS
  c:/ps_script/page3.PS
  c:/ps_script/page4.PS
  c:/ps_script/page5.PS
  c:/ps_script/page6.PS
  c:/ps_script/page7.PS
  c:/ps_script/page8.PS
  c:/ps_script/Page9.PS
  c:/ps_script/Page10.PS
  c:/ps_script/page11.PS
  c:/ps_script/page12.PS
  c:/ps_script/page13.PS
  c:/ps_script/page14.PS
  c:/ps_script/page15.PS
  c:/ps_script/page16.PS
  c:/ps_script/page17.PS
  c:/ps_script/page18.PS
  c:/ps_script/page19.PS
  c:/ps_script/page20.PS
  c:/ps_script/page21.PS
  c:/ps_script/page22.PS
  c:/ps_script/page23.PS
  Distill time: 00 hour (s): 00 minute (s): 00.390 second (s)
  End of job *.

  Is there something obvious that shouts, "you're a fool!"? I agree with that, simply to repair.

  I thank in advance for any help you can provide.

  Michael

  Run the Acrobat Distiller with the /F. command-line option

• How to change the table definition after upgrade from 9 to 10?

  after update from 9 to 10, DOF tables still as 9i:
  
  ................. PCTFREE, PCTUSED, INITRANS 40 10 1 MAXTRANS 255...
  ... inndex PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS...
  
  
  Is there a method to convert all tables to new style 10g without re-creating thousands of tables and emp/imp one then?
  
  
  Thank you

  You can use the package dbms_redefiinition to Redefine tables.
  You can find more information in this regard on the following links

  Syntax
  http://download.Oracle.com/docs/CD/B19306_01/AppDev.102/b14258/d_redefi.htm#CBBFDJBC

  All tasks
  http://www.Oracle.com/pls/db102/search?word=DBMS_REDEFINITION&PartNo=