The 'Standard' EULA screen?

Similar Questions

• How to reduce the brightness of the screen under the standard level

  Hello!

  How to reduce the brightness of the screen under the standard level in ThinkPad T520?

  I think we can somehow, but I don't know how. I reduced the brightness to zero with the Fn button + button end, but this is not enough, I want to make the screen darker, because my eyes get tired.

  The last (from Lenovo) Intel graphics driver is here:
  http://support.Lenovo.com/us/en/downloads/MIGR-77038

  This should provide a decent lower limit on the brightness. If the installation complains about the non supported hardware, force the installation using the devices and Disk Manager. (Something like this: http://forums.laptopvideo2go.com/topic/11997-have-disk-method-for-windows-7-vista/ )

  If this does not work, try f.lux (https://justgetflux.com/). It has a dimming function software (of course, he loses the contrast).

• How can I get the LabView return standard splash screen after installation of the evaluation of Robotics module?

  I installed the Labview Robotics module for evaluation, but when I start now Labview I meet the following start screen:

  

  How to bring back the Labview standard splash screen?

  Terje,

  When LabVIEW Robotics is installed, it replaces the file LabVIEW get a window on the way.  You can return to the standard window began to to repairing the installation of LabVIEW:

  1. Go to add/remove programs from the control panel.
  2. National Instruments -click and select Change/Remove.
  3. Choosing to fix LabVIEW.
  4. Insert the LabVIEW Setup disk if you have an or navigate to the network location that you used to install LabVIEW.
  5. After you have repaired LabVIEW, you should be able to restart with the default value getting started window restored.

• Satellite 1800-804: how to change the standard screen?

  Hello. I'd be very grateful if someone out there could help me. I have a 1800-804 Satellite which I removed the screen and instead connected to a screen size of Compaq and it works very well for the last 12 months so much so that I use it as my main office.

  My problem started when I downloaded a movie and I wanted to watch it on my tv. I went in the set up screen and it goes from 1 to 2 (because told me in this way that would turn screen to the TV screen).
  It was my mistake.

  Now I can't get it reversed back to the normal screen. The on-screen display, it's as if it is in ECONOMY MODE (large icons) that can only make?

  Thank you.

  Hello

  Which screen has low resolution? The external monitor or laptop screen?
  I guess you display resolution has been set to the lowest value.
  The resolve you should go in the graphic properties and select the view then increase the screen area and colors.

  Also check the advanced option. In the peripheral view tab, you will find the different options and device monitoring multi section where you can set the parameters on screen LCD/CRT or LCD/TV

  Check it out.

• I recently installed Firefox and choose one of the Harry Potter origins, but after awhile like to change the background of the standard home page, one you help me do this?

  Please tell us the steps to swap out the bottom of Harry Potter for the standard Firefox... while I like it, the background is too busy at the top of the screen of my laptop. Thank you

  See http://support.mozilla.com/en-US/kb/Using%20themes%20with%20Firefox#w_managing-themes-and-personas
  
  Choose 'Default' for the default theme of Firefox.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You must update some plug-ins:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox

• The standard weather app on my iphone 6 has stopped working.  It shows just my wallpaper grayed out when I try to access.  The app can be restarted or deleted and reloaded?  If so, how?

  The standard weather app on my iphone 6 has stopped working.  It shows just my wallpaper grayed out when I try to access.  The app can be restarted or deleted and reloaded?  If so, how?

  No, the soft part of the operating system, so it would mean reload the iOS together. Have you tried a forced reboot yet?

  Close all open applications by double-clicking the home button, and then drag to the top of the application window until it disappears from the screen.

  Reset your device: press and hold the home button and the sleep/wake button until the screen goes black, and you see the Apple, then let go. (No data loss)

• DIAdem: Customization of the User Interface: disable the Standard Menus or prevent < CTRL-U >

  I had a few issues of my latest DIAdem class participants.

  Is there a way to disable by program of Standard Menu items in tiara Script, or in the Desktop.ddd file?

  Except that - is there a way to programmatically prevent a user exit WndShow("Shell","FullScreen") when the script defines DIAdem to run full screen mode?

  DIAdem can not be stopped by Script programming?

  Hi Ryan,

  Yes, you can manipulate menus DIAdem standards. The example of "User-defined Menus" ("Menu_main.vbs") how to add own menus defined. But of course, you can remove the menu standards, too. Example:

  Dim iLoop, sPanelName

  sPanelName = 'REPORT '.

  for iLoop = MenuItemCountGet (sPanelName, "M") to 1 step - 1

  Call MenuItemDel (sPanelName, "Mr." & str (iLoop))

  next

  Since DIAdem 11.0, you can manipulate the tiara GroupBars and tiara ActionBars more. Please take a look at the example of 'Extend the Bar group' ('BarExample_Init.vbs'). And I could imagine that this could be extended for the next version of DIAdem.

  To prevent CTRL-U in the mode full-screen mode is not possible. This is the standard mode of Diadem failover.

  I don't know what you mean with "stop script programmatically. If you wanted to stop DIAdem and then use the command "ProgramExit".

  Greetings

  Walter

• Pavilion h8 - 1070t: blocked on the HP splash screen, computer beep

  I just installed a PSU Corsair CX600 and an EVGA GeForce gt 740.

  When I start my PC, is rest on the start screen and beeps once, every ten seconds. After 3 beeps (30 seconds) my PC beeps again followed three quick beeps and the monitor stops receiving signal from the computer (I do not see the HP splash screen, no signal).

  What could be the problem?

  I think that your problem is that the video card is not compatible with your BIOS.  EVGA 700 series cards require UEFI in the motherboard instead of a standard BIOS.  I suggest you to contact EVGA Tech Support (1-888-880-3842) to see if they have a VBIOS update that will allow the card to work with your computer.  If they do not have an update that they can email it to you.  Tell them that someone of the HP Forums suggested that you call.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• How to adjust the default column is displayed in the Windows Explorer screens

  I would like to change the concrete by default of my columns when you use Windows Explorer screen. It bothers me that I can't find a way to change the columns that appear by default whenever I open a new window.

  I want to display more or less than the default value. Everytime I open a window a new session with the Explorer, it displays update, Type, size and tags by default.
  I know how to add or remove a column, but it is a pain when you have to do every time especially if I have more than 10 windows open at a time.
  There is some great information available especially with the content of media like music, videos or photos. There are many categories to choose from which must be wound up manually like BitRate, author, size, Date acquired, update, etc...

  Is it possible to change this so that by default, I can choose the columns to display by default. Do not have to adjust them each time I open a new window.

  It is a 64-bit version of Vista Ulitimate, but if there is a response, I think it applies to all Vista OS...

  Hello Chuckbytes,

  Thank you for posting.  I have a solution to your problem.  This fix is to modify the registry.  If you do not want to edit the registry, and then don't do these steps.  Also always do a backup of your registry before making any changes.
  These steps are courtesy of Médard Ghazi of Tweakguides.
  Please let me know if this helps you.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk

  Changing folder views

  For example, you can set your directory \Users\[username]\Downloads to display in the Details view, but if you copy a picture, song or video in the directory, the next time that view you the content they can be display large icons mode. Even if go you back and change the view type, it can reset itself once more the next time you go a different file type in this directory.

  Solution

  Open the registry editor-
  Navigate to the following keys:

  [HKEY_CURRENT_USER Settings\Software\Microsoft\Windows\Shell\Bags]

  [HKEY_CURRENT_USER Settings\Software\Microsoft\Windows\Shell\BagMRU]

  Right-click on the bags key in the left pane and select Remove, and then do the same for BagMRU. This will remove most of the existing customizations for things like window sizes, positions and views. While still in the same place in the registry editor, you must manually recreate one of these keys, with a new parameter. Right-click on the following key in the left pane:

  [HKEY_CURRENT_USER Settings\Software\Microsoft\Windows\Shell]

  Create a new key called bags to replace the one you just removed. Right-click on the bags, select new > key and the name of this new AllFolderskey. Right click on AllFolders, select new > key and name the new key Shell. The final result should look like this:

  [HKEY_CURRENT_USER Settings\Software\Microsoft\ Windows\Shell\Bags\AllFolders\Shell]

  Now left-click on the last key Shell and in the right pane click right-click in an empty area and select new > string value. Name this new string FolderType and once created, double-click on it and in the value data box, you can set the default view, that all files will be initially (unless otherwise stated) by entering one of the following values:

  NotSpecified
  Contacts
  Documents
  Music
  Photos

  For example, if you enter Documents in the FolderType value data box (which I recommend), then all the files for which you do not manually set a default view to the standard Documents records display as you set it.

  Now, in Windows Explorer, go to your \Users\[username]\ directory and for each of the folder main types down there (Documents, photos, music, videos), make sure that you set the view as you want, including things like choose the columns to show, and what each of them is, the size of any icons/thumbnails, how they are sorted, etc. When you make the changes for each folder click organize at the top of the Windows Explorer, select "Folder and Search Options", go to the display tab and click on the button "apply to folders. This will set this view to all folders of this type even, and this method also means that should you copy files to another type in a folder, it will not change this folder view settings - in the future that the settings should stay exactly as you let them.

  Update: There is a step more that can help ensure that these parameters remain fixed. Navigate to the following key:

  [HKEY_CURRENT_USER Settings\Software\Microsoft\Windows\Shell]

  Left click on the Shell key and in the right pane, if you can see BagMRU Size then it is not necessary to take this step. If she's not there though, right click and select new > DWORD 32-bit value and name BagMRU Size. Now, set this value to 10000 in decimal mode (or 2710 in hexadecimal mode).

• How to stop the blue e screen to start the computer and also if you try to download anything

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  How to stop the blue e screen to start the computer and also if you try to download anything:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  We need numbers BBCode or Code to stop the bluescreens and utilities below will help you
  provide us information. Also the methods here can help you solve the bluescreens.

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I can't spend the standard account on my administrator account

  Hi, I can't log in to my administrator user accountant after the passage of a standard user account. Whenever I have change back to administrator username and enter the password on the login screen, it shows that the password is incorrect. I tried to login in safe mode, but that does not work, shut the pc down, disconnecting to the standard user... various other things but still cannot connect to the administrator. However if I change the settings of standard user account which requires the administrator password is ok. Very frustrating, please help.

  You use a non-English keyboard? If yes then it could be inactive during the recording.

  Have you tried connecting with your spare admin account?

  Have you tried setting the rear machine in a few days, using the system restore?

• The use of the standard features of Blackberry

  Please excuse my ignorance. I am very new to develop Blackberry applications. I use Eclipse that I have some experience with Java, although not much. Part of my problem is that I do not own a Blackberry, I'm doing this to help a friend. I spent the the last few days reading or watching the tutorials and passing by the code example and have now managed to create a couple of screens for my application.

  The only time I've ever seen anything like that on a Blackberry is on the 9550 Simulator provided with my Eclipse plugin. What I was wondering if there is a way for me to use the buttons as the standard buttons that I see on the Simulator or whatever I have to do my own bitmaps. Like these:--

  

  I would also like to have buttons along the bottom of my app like these, if the same question: -.

  

  One last question, even if I have a thousand. In looking at some of the simulator sections, I want to use the features I see that when I click on Media/photos I show a list like that: -.

  

  And when I click on one of the slides in the screen to the left with the new screen sliding from the right. I would like to use this kind of thing in my application. Can you point me to some tutorials or resources or give me some advice on how to do this?

  Help or advice will be greatly appreciated.

  The function of 'transition' (sliding screenes in) is available on OS 5.0. See the Transitions API.

  You may not use these logos existing app (you called buttons?)-they are part of the RIM.

  You cannot use the toolbar existing - it must invent your own.

  That said, you can certainly duplicate these features if you spend a little time to understand the architecture of the user interface and existing controls.

• Cannot return the 'Guest' to the standard user account Type

  I changed our Type of customer account to the administrator, so a family member could download some things when I was unavailable to repeatedly type a password for it.  Now, I would like to change the Type of account to standard - but I can't.

  When I connect like me, an administrator, and then click on manage other user accounts, the only changes I offer myself for the guest account are image change or disable the account.  When I log on as a guest and click on change the Type of account, I select the Standard button, click on change the account Type, and should not be.  I went back to the screen back and comments is still a Director.  What is happening with this limitation?

  Thank you

  Rosela

  Just disable the guest account.

  And will NEVER again allow him. It is a security risk because it allows anonymous access on your computer. Even worse, if you changed it administrator. (Why on EARTH made you that I have NO idea). This is why it is disabled by default.

  If you wish to allow someone occasional access to your machine to create a Standard user account and call it 'visitor' or something similar. You don't need administrator privileges to upload files...

  If you find my answer helpful, please click the button "Vote as helpful"! Thank you!
  My Windows Blog

• How to customize the windows welcome screen 7?

  Is it possible to change the standard background image that appears when the Welcome screen is displayed after the start? If this standard image of windows 7 may be changed, please provide instructions not to not showing how it can be done.

  Thank you.

  Step 1: Open the Windows Start menu and type regedit in the search bar.

  Step 2: right-click on HKEY_LOCAL_MACHINE , then select Search.

  Step 3: Search for OEMBackground, which should be in Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Authentication\LogonUI\Background. If the key does not exist, add a new DWORD value named OEMBackground.

  Step 4: double-click the OEMBackgroundentry and change the value from 0 to 1.

  Step 5: Open Windows Explorer and go to the following path: %windir%\system32\oobe.

  Step 6: Create a new folder named infoand open it. (It may be already created)

  Step 7: Create a new folder in info called backgrounds. (It is usually present.)

  Step 8: Rename your wallpaper desired as backgroundDefault.jpg and place it in the bottom of the folder (images must be less than 245 KB).

  Note: the first four steps are not usually required. At least on my PC, only the last four steps are needed.

  You can also use this app-http://www.techspot.com/downloads/4902-logon-changer-windows7.html

• Add the "View full screen" button of the Fusion 7.1.0 toolbar?

  VMware Fusion 7.1.0 display-> customize toolbar allows you to add/remove the button "Enter unity" on the Fusion toolbar. Why not also offer a ' display full screen ' button the Fusion toolbar?

  I'd swear that previous versions of Fusion has provided such a button. Online help documentation speaks of a "full screen button in the menu bar of Fusion' in previous versions, but does not exist in my Fusion 7.1.0 toolbar. It is quite a chore, because I continue to click the one that exists in the standard windows location / maximize traditional (top right), and it is the button "Enter unity" - and that's not what I want to see!

  Thank you

  -david-

  I do not regularly use Yosemite, but if I remember correctly the green button at the top left of the window has been changed to behave like the button fullscreen double-arrow has done throughout the OS X.  Try this one!

  See you soon,.

  --

  Darius