the stress points and Strict Type Def

Similar Questions

• When I try to install Adobe Creative Cloud stops, stops at halfway of the installation point and closes. (The download is also very slow) can someone help me please? Thank you!

  When I try to install Adobe Creative Cloud stops, stops at halfway of the installation point and closes. (The download is also very slow) can someone help me please? Thank you!

  Please, try the following steps:

  • Uninstall Adobe CC (https://helpx.adobe.com/creative-cloud/help/uninstall-creative-cloud-desktop-app.html)
  • Reboot the computer.
  • Install the latest Adobe Creative cloud version from the link: CC help | Creative cloud desktop

  Guinot

• the mouse pointer and cursor of dysfunction, cannot type, cannot connect to my user account?

  OK, I'm not sure how succinctly describe the problem since it is composed of so many things that have actually made my computer useless. I think it's a virus, but my virus scan did not come with something useful, so.

  Last night I watch Youtube videos and edit some pictures when I noticed that I had to type on the touch pad repeatedly until the computer responded. Then it stopped working completely (IE I could still move the mouse pointer, but couldn't click using the touch pad). I switched from windows to look for a solution on the internet, but when I clicked on the address bar of Google Chrome the cursor started ahead of his own, as someone has pressed the space bar - but I was not. This makes type impossible because there were huge gaps between each letter. I turned the computer off and back on (thanks, ICT courses), but the problem has not disappeared - only now, the mouse pointer disappeared sometimes still. It was getting late so I turned it off again and fell asleep.

  This morning as I began it upward there was noises Eman that makes it usually when I plug / unplug power. I tried to type in my password... and couldn't. The capslock wasn't on, I of course did not forget the password from one day to the next, but I kept receiving error messages and could not open a session. Even worse, when I tried to switch to an account that was not protected by Word, he kept jumping to the mine after maybe 3 seconds. I finally managed to click the icon of the second account and logged.

  The touchpad still don't click, when I open Chrome and clicked on the address bar he reacted as I clicked with the button right referring (so I couldn't type) and the mouse pointer always disappears randomly. I did a Norton quick scan and it came with 22 'risks' that he apparently 'fixed', but the problem has not yet disappeared. I would be v. grateful for a quick response, as the laptop is actually not mine, but my father (who keeps valuable most of his photographs on the hard drive).

  EDIT: I opened it in Mode without failure. the touchpad works now, but randomly on the keyboard keys have stopped working. Others come with a random combinations when I press on them, for example. "you" instead of "t", "p"] - when I press on «-» I can't even reinstall the keyboard drivers, because I can't type in my admin password.

  Also I do not know what topic to put this in so if it's wrong, please let me know!

  Hello

  1. What is the number of brand and model of the laptop?

  2. you have made no changes to the computer before the broadcast took place?

  Follow the steps mentioned below:

  Method 1:

  Run the fixit available in the link below and check if that makes a difference

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  Perform the clean boot and check.

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  
  Please note:  After troubleshooting, be sure to start your computer in normal mode by following step 7.

  Method 3:

  Step 1:

  Check the keyboard works well with the on-screen keyboard.

  http://Windows.Microsoft.com/en-us/Windows7/type-without-using-the-keyboard-on-screen-keyboard

  You can also check if the problem is keyboard or does not connect the external keyboard.

  Step 2:

  Update driver mouse

  a.Click Start.
   
  b control panel.
  menu a.Utilisez of the sons of the menu drop down next to the opinion of: in the upper right, select large icons.
  b.Click mouse.
  c the Hardware tab, click the properties button.
  d.Click on driver tab, click on set to update driver.
  

  Hope the above information is helpful.

• Identify the Type of Point and area Type, not just type

  AI tells you what you have selected in the control panel and in the appearance Panel.

  But when you select text, it just says: 'Type '.

  It would be nice if on the contrary, he says 'Point Type' or 'area '.

  I often play with the guy I want to see what kind it is because I forgot or whatever.

  I can want to intensify the type but there are 2 different approaches, and it depends on what kind of guy you have.

  It would really be hand to get There just tell you when you select a type.

  You can see if there is in

  ports and ports in the selected text, if there is, then this is the type of area, otherwise it is an object of type point.  In port-output port is the small rectangle along the bounding box in the upper left and lower right of the selected text object.

• Always downloaded files like "attachment.ashx" instead of the file name and file type they actually are.

  Since I installed the new version of Firefox (version 8.0), I download each file is downloaded as "attachment.ashx" and will not open. I need to change the name and the type of file to open the document.

  This happens regardless of whether I download e-mail, a Web site, etc... All the files I downloaded also have been appointed and had added of file types, but Firefox them changes every time. I've never had this problem before using the same sites and downloads.

  Hi Linda,.

  You can download and rename the file with a .doc extension, so you can open them with word, sorry for my late reply.

  -Michelle

• Keep the data on the record points and serve the rest

  Hello world!

  I think somehow either CompressWorkspace [tree] or PurgeTable what we want to do, but somehow I don't see exactly how...

  Here's our situation: the admin of our customer demand can create backup points. He made what is called "data freezing" happens a few times a year (3-4).

  The database is created using WO_OVERWRITE to keep a track full edit. However, for older data we now to just keep recording data and delete what that it is between the two. Only for the most recent backup points, we always want to keep the complete history. Is there a way to do this?

  To clarify things, with some text-Art, this might look like this for 5 Savepoints SP1... SP5:

  [SP1]-[SP2]-[SP3] hhh [SP4] [SP5] of hhh hhh [LATER]

  where - means "no historical data here" and "hhh" means "here for historical data.

  My first guess was the CompressWorkspace procedure, but if I give two points for first registration is deleted. What we want to do is give two points of record, have deleted all the data of the history between the two and keep both the backup points. In the example above, we would like to compress between SP1 and SP2 the SP2 and SP3.

  Note: the database will be migrated soon to 11 GR 2, so all the features of the OWM until this version can be used for a solution.

  Any help is appreciated!

  Kind regards

  Andreas

  Hi Andreas,

  You don't want to use CompressWorkspace.  Specify the backup even point to firstSP and secondSP and the parameter compress_view_wo_overwrite set to true.  Thus, for example:

  SQL > dbms_wm.compressworkspace exec ('LIVE', true, "SP1", "SP1");

  This should be done for each backup point where you want to delete the history.  The procedure would remove all lines for each primary key value, with the exception of the most recent in the backup point.  It cannot be done on a variety of checkpoints at the same time, as that would remove the previous save points, as you pointed out.

  Kind regards

  Ben

• Has this been resolved? Menu animated project Blu - ray pauses at the level of the loop point and loss of conference.

  We still CS6 and lively menu of a Blu - ray project that contains a loop point paused at the level of the loop point, resulting in the loss of some images conference.

  Still has a known problem with gaps of loop point. I do not think that this puts the bluray in to pause, however.

• I have a compaq presario cq57 notebook pc and my wireless is not solving the problems of work said that the access point and wireless network card works I need help to fix this please

  the internet works only with the ethernet cable and not wireless. I have service with comcast.

  Hi, Antonia.
  Thanks for posting your question on the Forums of community of Microsoft.
   
  1. do you get an error message?
  2. don't you make changes to the computer before the show?
   
  Here are some ways you can follow to resolve the problem:
   
  Method 1:
  Check out the link and follow the steps in the article:
  Troubleshooting your wireless network and Internet access (Windows 7)
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c02543015#n55

   

  Method 2:

  Reference:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

   

  Hope this solves the problem

• Scripting - refer to a Strict Type Def control

  Hi - I need to automate some sorting and the strict removal of functions in a def type of an enum control I have. I would like to write some programs to deal with this rather that enter the definition of the type of control and do everything manually.  The fact that a person can do those through the Edit dialog box tells me that you should be able to access these methods through script.

  Thus, the fundamental question is; How can I get a reference to this control?

  Thank you

  Dan

  A custom control is actually a VI, so use the reference open VI and give the path to the typedef. VI reference resulting allows to get the reference of the actual control on the FP, and then call the Save Instruments on the VI method when you are finished.

• Regulator PID very slow to reach the value Point and zeros process Variable when it should not

  Hello

  I am using a PID controller to regulate the emission of a filament current in an ion gauge, but I'm running into several problems.

  The first and less important, are the controller of PID VI takes at least 5 minutes to get the current where it needs to be.  Is it possible to speed this up?

  The second and more important, are that the PID controller tends to zero the process variable before you start the process of getting the close process of the target value variable.  This can be seen in the attached VI: I write 5.8 volts voltage filament - something I did at the beginning to try to get the controller PID for the process close to the target faster - value variable but when the PID controller starts to do his thing, he kills the tension before anything, rather than rise of 5.8 V.

  The attached VI is a single which has these problems.  VI actual ion gauge controller I've written has the same problems, but in a form even more frustrating.  I have a while loop set up for the filament voltage to where it should be (using a PID controller) first and foremost, then a loop of data acquisition, which also includes a feedback loop in the form of a PID regulator to maintain the filament voltage.  When the second PID controller starts to run, it concentrates the tension that the earlier had set, taking another 5 + minutes to reach the point where we can take data and giving us 5 minutes of false data in the process!

  Does anyone know why PID controllers are behaving like this, and what can I do to fix/work with this behavior?

  Hello

  It seems that PID VI will always be 0 for the first iteration. You can, however, use the advanced PID VI and set up the first iteration in manual mode. After subsequent iterations, you could then define this automatic mode and there will be a transition smoothly. I think this will give you the desired behavior.

  -Zach

• Can I still use Windows journal, if I have the handwriting recognition and just type my text with the default keyboard input?

  I have a Gateway laptop computer and I tried to use Windows journal without handwriting recognition.  So, he feels a bit lame that I can't understand how to enter text with my default keyboard or whatever it takes.  I think I'm pretty computer, so maybe I am an annomaly of persanal that seems to happen to me a lot!  Thus, any help I can get with this problem would be cool.  I type to fast however, just hunt and Peck, so please be patient.  Thanks in advance!

  Best regards, bryznet

  Hi bryznet

   

  Windows Journal is part of the Group of Tablet PC accessories. It is not a keyboard application.
  It is an application ink for taking notes of ink and writing to text conversion.
  If you want to simply type in the text, you can use a word such as Notepad or Microsoft Office Word application.

  If you want a combination of features of ink and/or the text of note taking, then watch Microsoft OneNote (think of it as Notepad Word, OneNote is)
  http://Office.Microsoft.com/en-us/OneNote/

  I hope this helps.

• Detect the overlap point and shape

  Hey guys,.

  I'm doing a simple game where circles are created and you must click on them to get rid of them. I have the code for creating them and that works well, and I add to a table when they are created.

  However, I don't know how to detect if the point where you click is fit or not. Here's the code, I have a "?" where I don't know how to do

  ------------------------------------------------------------------------------------------ ----------------------------------------

  package

  {

  import flash.display.MovieClip;

  import flash.display.Shape;

  import flash.events.Event;

  import flash.events.MouseEvent;

  Import fl.transitions.Tween;

  Fl.transitions.easing import. *;

  Import fl.transitions.TweenEvent;

  import flash.utils.Timer;

  import flash.events.TimerEvent;

  to import flash.geom.Point;

  import flash.display.DisplayObject;

  SerializableAttribute public class Main extends MovieClip

  {

  var coolDown:Timer;

  var circleArray:Array;

  public void Main()

  {

  stage.addEventListener (MouseEvent.MOUSE_DOWN, mouse click);

  charging time = new Timer (1000, 1);

  coolDown.addEventListener (TimerEvent.TIMER_COMPLETE, timeDone);

  coolDown.start ();

  circleArray = new Array();

  }

  function timeDone (e:TimerEvent): void

  {

  var theX:Number = (Math.round ((Math.random () * 450) + 50));

  var they: number = (Math.round ((Math.random () * 450) + 50));

  var circle: Shape = new Shape();

  circle.graphics.beginFill ((Math.random () * 0xFFFFFF), 1.0);

  circle.graphics.drawCircle (0, 0, ((Math.round (Math.random () * 40)) + 20));

  circle.graphics.endFill ();

  Circle.x = definition x;

  Circle.y = they.

  stage.addChild (circle);

  circleArray.push (circle);

  var xTween:Tween = new Tween (circle, "scaleX", Bounce.easeOut, 0, 1, 0.5, true);

  var yTween:Tween = new Tween (circle, "scaleY", Bounce.easeOut, 0, 1, 0.5, true);

  coolDown.addEventListener (TimerEvent.TIMER_COMPLETE, timeDone);

  coolDown.start ();

  }

  function mouseClick (event: MouseEvent): void

  {

  var themouseX:Number = new Number (mouseX);

  var themouseY:Number = new Number (mouseY);

  var mousePoint:Point = new Point (themouseX, themouseY);

  var i = new int();

  for each (var circleArray circle)

  {

  ???????

  }

  }

  }

  }

  ------------------------------------------------------------------------------------------ ----------------------------------------

  All this code seems to work so far, I do not know how to detect whether or not you're clicking on one of the circles in the table.

  I didn't add any to a movieclipI to add each to its own movieclip.  Then, you can have the eventlistener assigned to each movieclip and when you click on one, the identification is easily determinable.

• NAT is allowed between the Access Point and the WLAN controller?

  Suppose that the AP and controller communicate over a network of L3.

  NAT can be done between the two?

  For example, suppose that the AP is connected to a DSL router that is running NAT.

  Yes, I worked on projects where we did a DRY VPN with NAT. As long as the AP is routable, it will call home.

• How to get photoshop to go back to the default brushes and other types of settings?

  I've been playing around with phothoshop when I installed first, and when I opened it again, I noticed that it records what you have changed, with brushes and pens and other things you use probably a lot. So my question is, how to get back to the things that have been selected? What's a sense?

  Hello!

  In addition to the advice of the Mylenium, you can also reset the brush settings in:

  

  

  You can also reset your workspace by the following text:

  

  Here's a video of step by step on How to reset Photoshop cs6 preferences file:

  Please post if you have any other questions,

  Janelle

• to remove the numbers after the decimal point and round

  Hi all
  
  
  

  select       (sum(case when (F.ITEM_UOM = 'Cubic Feet' and upper(substr(H.SLURRY_TYPE,1,3)) <> upper('Top')) then
  
              (((((H.SLURRY_VOL_ACTUAL * 5.6146)/H.SLURRY_YIELD)*94)/2000)   )
  
               when (F.ITEM_UOM = 'Cubic Feet' and upper(substr(H.SLURRY_TYPE,1,3)) = upper('Top')) then
           (   ((nvl(H.CLASS_V_CEMENT,0)*94)/2000)   )  
  
          when F.ITEM_UOM =  'Pound' then 
        CEIL(  ROUND((((((H.SLURRY_VOL_ACTUAL * 5.6146)/DECODE(H.SLURRY_YIELD,0,NULL,H.SLURRY_YIELD)))*94)*F.ITEM_PERCENT/100)))/2000
         end)*(j.opn_value/2))  SUM_MAT_ACT_TON ,--------transport
                     
  
                     sum(case when (F.ITEM_UOM = 'Cubic Feet' and upper(substr(H.SLURRY_TYPE,1,3)) <> upper('Top')) then 
  
              ((H.SLURRY_VOL_ACTUAL * 5.6146)/H.SLURRY_YIELD)
  
        when (F.ITEM_UOM = 'Cubic Feet' and upper(substr(H.SLURRY_TYPE,1,3)) = upper('Top')) then 
  
              nvl(H.CLASS_V_CEMENT,0)
                 
          when F.ITEM_UOM =  'Pound' then 
              ROUND(((ROUND(((H.SLURRY_VOL_ACTUAL * 5.6146)/DECODE(H.SLURRY_YIELD,0,NULL,H.SLURRY_YIELD)))*94)*F.ITEM_PERCENT/100 )/P.ATTRIBUTE5)
  
     end) SUM_sload ,    ----sload
     sum(case when (F.ITEM_UOM = 'Cubic Feet' and upper(substr(H.SLURRY_TYPE,1,3)) <> upper('Top')) then 
  
              ((H.SLURRY_VOL_ACTUAL * 5.6146)/H.SLURRY_YIELD)
  
       -- when (F.ITEM_UOM = 'Cubic Feet' and upper(substr(H.SLURRY_TYPE,1,3)) = upper('Top')) then 
  
            --  nvl(H.CLASS_V_CEMENT,0)
                 
          when F.ITEM_UOM =  'Pound'  and F.BLEND <> 'PH'then 
              ROUND(((ROUND(((H.SLURRY_VOL_ACTUAL * 5.6146)/DECODE(H.SLURRY_YIELD,0,NULL,H.SLURRY_YIELD)))*94)*F.ITEM_PERCENT/100 )/P.ATTRIBUTE5)
  
     end) BLENDING
    ,e.opn_job_desc
       FROM xxnp_opn_joblog_001 E,
            XXNP_OPN_JOBLOG_EST_002   F,
            XXNP_OPN_JOBLOG_STAGE_002 G,
            XXNP_OPN_JOBLOG_SLURRY_003 H,
      XXNP_OPN_JOBLOG_RES_005 J,
       MTL_SYSTEM_ITEMS_B P 
        WHERE E.OPN_JOB_DESC   = 'K/D/SP158/SA399/1338/D/0510/1' AND
          E.MANUAL='N'
     and J.opn_resource_desc='4X4  PICK-UP OR LIGHT VEHICLES'
      AND E.OPN_JOBLOG_001_ID = J.OPN_JOBLOG_001_ID 
       and F.INVENTORY_ITEM_ID=P.INVENTORY_ITEM_ID
         AND p.ORGANIZATION_ID='103'
        AND E.OPN_JOBLOG_001_ID = G.OPN_JOBLOG_001_ID
          AND G.OPN_JOBLOG_006_ID = H.OPN_JOBLOG_006_ID
          AND H.OPN_JOBLOG_007_ID = F.OPN_JOBLOG_007_ID
          AND G.OPN_JOBLOG_006_ID = H.OPN_JOBLOG_006_ID
          AND H.OPN_JOBLOG_007_ID = F.OPN_JOBLOG_007_ID
                                  GROUP BY E.OPN_JOB_DESC,j.opn_value
  o/p  i am getting
  SUM_MAT_ACT_TON      SUM_SLOAD                         BLENDING                                   OPN_JOB_DESC
  11587.7954154787         1957.62401925833               1454.62401925833                       K/D/SP158/SA399/1338/D/0510/1
  
  well can anyone guide me on  obtaining the following output (to remove decimal places and round )
  
  SUM_MAT_ACT_TON      SUM_SLOAD                         BLENDING                                   OPN_JOB_DESC
  11588                           1958                                      1455                                          K/D/SP158/SA399/1338/D/0510/1

  thanking in advance
  
  Edited by: makdutakdu may 25, 2010 12:48

  select      round( (sum(case when (F.ITEM_UOM = 'Cubic Feet' and upper(substr(H.SLURRY_TYPE,1,3))  upper('Top')) then
  
              (((((H.SLURRY_VOL_ACTUAL * 5.6146)/H.SLURRY_YIELD)*94)/2000)   )
  
               when (F.ITEM_UOM = 'Cubic Feet' and upper(substr(H.SLURRY_TYPE,1,3)) = upper('Top')) then
           (   ((nvl(H.CLASS_V_CEMENT,0)*94)/2000)   )  
  
          when F.ITEM_UOM =  'Pound' then
        CEIL(  ROUND((((((H.SLURRY_VOL_ACTUAL * 5.6146)/DECODE(H.SLURRY_YIELD,0,NULL,H.SLURRY_YIELD)))*94)*F.ITEM_PERCENT/100)))/2000
         end)*(j.opn_value/2)))  SUM_MAT_ACT_TON ,--------transport
  
                     round(sum(case when (F.ITEM_UOM = 'Cubic Feet' and upper(substr(H.SLURRY_TYPE,1,3))  upper('Top')) then 
  
              ((H.SLURRY_VOL_ACTUAL * 5.6146)/H.SLURRY_YIELD)
  
        when (F.ITEM_UOM = 'Cubic Feet' and upper(substr(H.SLURRY_TYPE,1,3)) = upper('Top')) then 
  
              nvl(H.CLASS_V_CEMENT,0)
  
          when F.ITEM_UOM =  'Pound' then
              ROUND(((ROUND(((H.SLURRY_VOL_ACTUAL * 5.6146)/DECODE(H.SLURRY_YIELD,0,NULL,H.SLURRY_YIELD)))*94)*F.ITEM_PERCENT/100 )/P.ATTRIBUTE5)
  
     end)) SUM_sload ,    ----sload
     round(sum(case when (F.ITEM_UOM = 'Cubic Feet' and upper(substr(H.SLURRY_TYPE,1,3))  upper('Top')) then 
  
              ((H.SLURRY_VOL_ACTUAL * 5.6146)/H.SLURRY_YIELD)
  
       -- when (F.ITEM_UOM = 'Cubic Feet' and upper(substr(H.SLURRY_TYPE,1,3)) = upper('Top')) then 
  
            --  nvl(H.CLASS_V_CEMENT,0)
  
          when F.ITEM_UOM =  'Pound'  and F.BLEND  'PH'then
              ROUND(((ROUND(((H.SLURRY_VOL_ACTUAL * 5.6146)/DECODE(H.SLURRY_YIELD,0,NULL,H.SLURRY_YIELD)))*94)*F.ITEM_PERCENT/100 )/P.ATTRIBUTE5)
  
     end)) BLENDING,
     e.opn_job_desc
       FROM xxnp_opn_joblog_001 E,
            XXNP_OPN_JOBLOG_EST_002   F,
            XXNP_OPN_JOBLOG_STAGE_002 G,
            XXNP_OPN_JOBLOG_SLURRY_003 H,
      XXNP_OPN_JOBLOG_RES_005 J,
       MTL_SYSTEM_ITEMS_B P
        WHERE E.OPN_JOB_DESC   = E.OPN_JOB_DESC  AND
          E.MANUAL='N'
     and J.opn_resource_desc='4X4  PICK-UP OR LIGHT VEHICLES'
      AND E.OPN_JOBLOG_001_ID = J.OPN_JOBLOG_001_ID
       and F.INVENTORY_ITEM_ID=P.INVENTORY_ITEM_ID
         AND p.ORGANIZATION_ID='103'
        AND E.OPN_JOBLOG_001_ID = G.OPN_JOBLOG_001_ID
          AND G.OPN_JOBLOG_006_ID = H.OPN_JOBLOG_006_ID
          AND H.OPN_JOBLOG_007_ID = F.OPN_JOBLOG_007_ID
          AND G.OPN_JOBLOG_006_ID = H.OPN_JOBLOG_006_ID
          AND H.OPN_JOBLOG_007_ID = F.OPN_JOBLOG_007_ID
                                  GROUP BY E.OPN_JOB_DESC,j.opn_value