The system diagnostics Netbook dm1 fails

When I run the diagnostics of HP Support Assistant on my dm1 (Windows 7 Home Premium 64-bit), I get the following errors. I think that software Support Assistant itself has been updated recently, so maybe that caused the problem. What can I do to fix this?

I finally managed to solve this problem in just reinstall HP Support Assistant - new. I did not uninstall first: I just install it to new 'over-the-top', but I think that the installer actually uninstall all existing versions first in any case. Problem solved - pity HP were not able to help after the initial response...

Tags: Notebooks

Similar Questions

  • The System Diagnostics

    Hi all

    I tried to run Diagnostics from the system of Lenovo and I see is a message in red saying it is running and wait. Well, I waited for an hour and I think that it worked at all.

    I've never had to wait this long. Why is this, and this is not acceptable?

    OK, I found the problem. I did a system restore to 06/05 and there are some programs that have been restored that I had uninstalled before that was a mistake and caused diagnostics to fail. If after the system restore, my first attempt to run the Diagnostics failed. The second attempt was successful.

    Thanks Spidey.

  • the system diagnostics report

    Hello

    I need help with the reporting system on my pc, I already looked at help section to try to understand that I had missed to correct the report.  I ran a report of diagnoses of the system 2 times and each time I do, I get the same report indicates that the Security Center has not registered an anti virus product and the need to check an anti virus product is installed and functional. I have entered the system on my pc and etc and having other things on mine, but the report is still saying there is no anti virus detected security.

    Thanks for any help.

    Regina

    Hello

    I suggest that you want to run a full virus scan using Windows Defender in offline mode, because it can help to remove hard to find malicious and potentially unwanted programs using definitions that recognize the threats.

    Definitions are files that provide an encyclopedia of potential software threats. Armed with definition files, Windows Defender in offline mode can detect malicious and potentially unwanted software and then inform you of the risks.

    http://Windows.Microsoft.com/en-in/Windows/what-is-Windows-Defender-offline

    http://Windows.Microsoft.com/en-in/Windows/Windows-Defender-offline-FAQ

    http://blogs.technet.com/b/Security/Archive/2012/09/19/Microsoft-s-free-security-tools-Windows-Defender-offline.aspx

    What is Windows Defender Offline? : http://windows.microsoft.com/en-US/windows/what-is-windows-defender-offline

    Note: There could be a loss of data while performing a mode offline scan using Windows Defender to remove viruses as appropriate.

    Response with the State of the question and we will be happy to offer you our help.

  • Where are the drivers for "Microsoft Tun Miniport Adapter" (named by the System Diagnostics report), also known as "Teredo Tunneling Pseuso-Interface" (as he is called by Device Manager)?

    Microsoft Corp. has made an extremely simple task almost impossible. All MS don't research drivers, software, etc. for this show no results found. There are dozens and dozens of forums discuss many problems thereby, but not links to downloads for the drivers. Despite the many discussions that say it can't be uninstalled, they are wrong...
    After all appropriate measures in the right order without result, I did as directed and diagnosis. Archbishop of the device with the plan to reinstall later uninstalled...  Now, it is not found on my computer or on MS research.
    I have Vista Home Premium on a Compaq CQ50 Notebook, w / 160 G hd, 2 GB RAM, 1YR & 1 Mo. old.

    ALL I want is a link to download the drivers & or whatever is needed to reinstall this device in good working condition. If this is not possible, please let me know what other options I might have.
    I thank very you much for your kind consideration of this request.

    Hello danjams,

    This is no fault of Microsoft, that a driver problem to the hardware of your system. Microsoft did not make these drivers for your computer. You must visit the site Web of HP/Compaq download all the drivers/software for your make and model of system. Also never leave windows utility updated your computer's hardware. Once you have downloaded them, record them onto a cd for him come in handy should need you the in the future. Hope this helps you. Let us know anyway. Make it a great day!

    "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

  • The System Diagnostics report what is the cause?

    Symptom: Device is not present, not working not properly.
    or does not all its drivers installed.
    Cause: A device has a configuration problem that
    It prevents from functioning correctly.
    Details: The device, MpKsl052d11ad, reports
    'tv_ConfigMgrErr24 '. This device won't be available until the issue is
    solved. The Plug and Play ID for this device is
    ROOT\LEGACY_MPKSL052D11AD\0000.
    Resolution: 1. check that the correct driver is
    installed.
    2. try updating the drivers using Windows
    Update.
    3. check with the manufacturer for an update
    pilot.
    4. try uninstalling and reinstalling the
    device by using Device Manager.
    Partners: Explanation of
    Error codes generated by Device Manager
    Manage devices
    in Windows

    I'm not sure, just found by google, but have a read of:

    http://rbatko.blogspot.co.UK/2011/07/tvconfigmgrerr24-solved.html

    and

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/tvconfigmgrerr24/d09a9481-e2d3-41fc-86EB-46742be0ab65

    who seem to have messages in the same sense in them, like:

    ' Solved by removing devices and reboot the computer.
    Go into the Device Manager, select 'Show hidden devices' find it and uninstall it. »

    and

    "I went to the device and under choose

    As I say, just found by a Goolge, but if they appear similar to your problem and if no further assistance is available, it may be worth it. Or at least a peek in to see Device Manager if the devices are listed in it. If you want to play safe, back up your system first before deleting anything then you can return to where you are now if the worst happens.

  • The system continually restore fails

    I am running XP Home Edition & I tried the system restore, but it fails. I did it in Safe Mode, still fails. I disabled Norton & still not good. I did the test, creating a Point of restoring TEST & test Desktop folder & it worked. But it will not restore to an earlier date. I tried going back a month dates & still does not work. Any ideas?

    XP forums:

    http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

    Link above is for XP Forums.

    There is a list of the different Forums XP to the link above to help you.

    You get the help you need there.

    Here is the Vista Forums.

    See you soon

    Mick Murphy - Microsoft partner

  • Missing icons and the system restore failed with the error code: 0xc0000022

    More a cosmetic problem, but it is annoying me.  I wonder if anyone can help.

    I'll try to explain what happened and explains the steps that I tried to solve.

    At the launch of windows, after connection, some icons began to miss on the desktop.  Below, these appear to be programs of Microsoft and Apple.

    If I choose to properties and then change icon... from the office, I get the following error:

    Icons for mainly products of Microsoft and Apple are also missing from the start menu.

    However, if I go into properties here, the change icon... button is grayed.

    It happened once before.  I tried to run the system restore.  The last time I did this the system restore said have failed - however, the icons were restored.  I tried the same thing again once, however the system restore has not (yet), but this time, the icons are still missing.

    I tried to create a new user, but the new account also has the missing icons.  I also ran a full virus scan (Avast) and Windows Defender, but they found nothing.

    While not a huge problem, it's annoying, and I wonder if it points to a bigger hidden problem.

    Any help would be appreciated.

    Original title: lost a few icons on the desktop and start menu.

    Hello

    Thanks for the reply.

    You try to follow the below link to uninstall Microsoft Office 2007 and see if that helps.

    How to uninstall the suites Office 2003, Office 2007 or Office 2010 if you can not uninstall in Control Panel?

    http://support.Microsoft.com/kb/971179/en-us

    If this does not help then, try posting your question in the forums of Microsoft Office 2007 and see if that helps.

    Microsoft Office 2007

    http://answers.Microsoft.com/en-us/Office/Forum/Office_2007?tab=threads

    I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

    Thank you

  • Partition HP_TOOLS after update from HP System Diagnostics (UEFI)?

    Hello

    I bought a Compaq HP 6730 s about 2 and one and a half years. Last time I installed Windows was in 2009, when I switched to Win7 Pro x 64. I usually keep my system up to date so I decided to use HP Softpaq Download Manager to see what is new because I have not done in a year about. By updating HP System Diagnostics (UEFI) I noticed the installer to begin creating a new partition using DISKPART. It has 2 GB of E:\ and created a new partition HP_TOOLS (H:\).  First of all, was it really necessary given that I had only 3.5 GB of free space on E:\? In addition, the old version of HP System Diagnostics (UEFI) has not used a separate partition. Secondly: is it really necessary to keep or is the only partition something temporary created to facilitate the update process (although this makes no sense to me), meanning can I simply delete and merge into E:\.

    Third: in the case where HP_TOOLS is not delete recomanded, at least hide by using the local Group Policy Editor?

    Thank you!

    The latest version of the installer of HP System Diagnostics (UEFI) gives an option for installation on drive hard or on a USB flash drive according to your needs. I personally recommend not not to delete the partition HP_TOOLS as its useful during the process of updating the BIOS in case if you want to do a restore etc.

    HP_TOOLS partition is also useful in F2 (the System Diagnostics) market in the case of any emergency if necessary.

  • What should I do to obtain a certificate of good health in a new system diagnostics report?

    I ran the system diagnostics report, and he informed me that there is no anti-spyware and anti-virus actively protect my hp dv9000 Laptop.  I use Microsoft Security Essentials.  It seems to work smoothly again in the system diagnostics report, I am informed that there is no anti-spyware and antivirus actively protect my computer.  What can I do to fix this?

    Hi, Bj,

    The diagnostic software must be updated by the manufacturer of the computer to recognize Microsoft Security Essentials.  Be based on the status of Windows Vista security report and Microsoft Security Essentials icon status.  Ignore the rest.

    A fix has been implemented for Windows 7 same question-

    The report of health system does not detect the antivirus applications installed in Windows 7

    http://support.Microsoft.com/kb/2482947

    Windows doesn't detect all antivirus software, and some antivirus software doesn't relate its status to Windows. If your antivirus software is not displayed in Windows Security Center, and you don't know how to find it, try the following:

    • Looking for the antivirus software in the programs list on the start menu.

    • Type the name of the software or the Publisher in the search box of the start menu.

    • Look for the icon in the notification area of the taskbar.

    You can try to uninstall MSE, reboot, and reinstall the software to see if it is detected when you are finished.

  • When you try to log on, get error - "the system event notification service has no logon. the remote procedure call failed and did not execute. »

    My netbook will not open a session because it can not find a certain file. She won't tell me the file. and when I try to go to safe mode it freezes... is there anyway I can just read another account another point? the message I get is "the system event notification service does not log. the remote procedure call failed and did not execute. "tips anyone? I care is no longer the files it contains. If I could wipe it off somehow to factory settings then would be too cool. his windows 7 starter edition


    Original title: hp netbook to log issue

    You have two options:

    • Perform a factory restore. Check the homepage of the manufacturer for instructions.
    • Start the computer with your Windows XP installation CD, and then follow the prompts. You will have to find the different drivers to match your hardware, for example a driver for SATA hard drive.
  • Cannot connect to the system Windows - user profile service failed to connect

    I can't connect my laptop for the 1st time

    I get an e-mail from the user profile failed to connect

    User profile cannot be loaded

    Ideas please

    If you have a Toshiba SSD in your laptop there is a problem in windows 7, making it impossible to connect to the system when the storage TOSHIBA utilities are installed. In this case, you will need to find a way to get the system and uninstalling.

  • I need to get the bookmarks from a backup hard drive that the system failed on. were can I find the file/folder of bookmarks?

    I need to get the bookmarks from a backup hard drive that the system failed on. were can I find the file/folder of bookmarks?

    User Agent

    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; NET4.0C; Media Center PC 6.0)

    Bookmarks are stored in a file called places.sqlite in the profile folder.
    To find out where the profile folder, see http://kb.mozillazine.org/Profile_folder_-_Firefox

  • Optical drive is not recognized in Windows 8.1 (x 64) or in the UEFI System Diagnostics.

    Description of the problem:

    Optical drive is not recognized in Windows 8.1 (x 64) or in the UEFI System Diagnostics.

    Steps to recreate:

    UEFI:

    1. Start the PC in diagnosis system UEFI (F2 at the STATION)
    2. Pane controls
    3. Optical drive
    4. Sequential control
    5. Error: Optical drive not installed.

    8.1 Windows (x 64):

    1. Run Device Manager
    2. Error: No CD/DVD Drives section.
    3. Search for new hardware changes nothing.

    Relevant system specs:

    Mobile: HP Pavilion 15-n023sa (construction of vanilla)

    Optical drive: HP DVDRAM gu70n

    Steps already taken to solve:

    • Replaced the DVD drive with one of the similar specs of HP Pavilion. The replaced gn70n perfectly in the other machine. No change on problem laptop. Conclusion: DVD player works, and there is no problems with Windows 8.1 (x 64).
    • Removed DVD player. Restarted the computer. Sign in to Windows. Stop. Replace the DVD drive. Start the laptop. This is trying to solve defects of material with the PnP devices; more help to solve any problems of intermittent loose connection. Conclusion: No change.
    • Ran, troubleshooting of hardware and devices, via the control panel. Problem found: material changes may not have been detected. Explore more options just takes you through http://social.answers.microsoft.com/search/en-us/?query=hardware+device, that it is a 404 error page. Conclusion: Help and Support Windows is sorely lacking. They show no more information than just that something was detected as incorrect.
    • Ran the Microsoft FixIt troubleshooting of optical disc and auto repairman. (http://download.microsoft.com/download/F/5/8/F586FB7C-78E0-40EB-AF41-4C925F803CAF/CDDVDWin8.meta.dia... The convenience store has reported that the device was not found. He recommended to remove all power cables, power off, and various other things which have no relevance for computer laptop troubleshooting of switching equipment. He said: If the problem persists, contact the manufacturer. Conclusion: Windows troubleshooting can not solve the problem.
    • Run Windows Update to ensure that all updates and definitions have been installed. Conclusion: Windows is perfectly up to date.
    • Run a complete Rootkit and malware using Sbybot S & D 2.3 heuristic analysis. as a signature database scan using Windows Defender. Conclusion: Laptop is clean of rootkits and malware, to the best of my knowledge.

    Notes:

    The DVD player is NOT appear in Device Manager, OR in this PC.

    The DVD drive is NOT detected by diagnostics system UEFI.

    There is reference to the DVD in BIOS drive NUMBER , other than as an option of Setup, which is generic.

    The DVD player itself, works and has been verified on a different machine.

    The only possible conclusion is that the optical drive port mini-SATA on the motherboard is dead.

  • Re: Satellite U400 - failed to start the system recovery

    I have a Satellite U400-PSU44E and Windows Vista Home Premium 32-bit preinstalled and having some problems with my computer, had decided to use the hidden partition on the hard drive to fix the system.
    I chose 'Repair your computer' (or something similar to this), but having done, a message tells me that,

    "The installed program cannot start. Click OK to turn off the computer. »

    I don't know why that is. Can anyone help? It would be greatly appreciated.

    The Partition Recovery seems to be defective. You can order the replacement of Toshiba recovery disks. Which country are you?

    Another possibility could be that the HARD drive has failed. in this case, you will need to send the system to an ASP for repair.

  • System Image backup has failed during the backup

    I have a 2 years old HP pavilion g series notebook.  I did a backup system image on dvd + r discs. It was almost over, when the drive #99, I got this message "the backup failed. The system cannot find the specified path (0 x 80070003)
    My computer is no longer under warranty and I'm $ 60 in the disks if they can't be used.  I need to know there is a way to save what I saved and restart the backup of the Image where it left off?

    Product: A6Z59UA #ABA
    Model: g61d60us

    Hi CherylLyme,

    Welcome to the HP Forums!

    I would like to take a moment and thank you for using the forum, it's a great place to find answers.

    You have the best experience in the HP forum, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    I understand that you did an image backup, and while he was almost done you received the error (0 x 80070003).  Here is a link to a response from Microsoft to help you. Windows backup error 0 x 80070003 (One answer per Vinod N)

    I'm not sure if you would be able to leave and get back on disc 99, because once you have repaired, it will be changed from when you first ran the backup.  The disc that you used only were not read, accessible writing, so you wouldn't be able to reuse them.  You can see that an external hard drive would be a more economical way to make your backups. The data must be in one place and easier to store.  If you decide to use a USB key, so do not more then the 32 GB and won't Windows 8 on it.

    You can probably buy an external drive for on the cost of the replacement of disks.  Here is a link to the HP Shopping external storage , but you can buy one at several places, Office Depot, Staples, Wal-Mart and computer shops are few.  I hope this helps.

Maybe you are looking for

  • Libretto W100 - SSD model

    Hello can anyone tell my what SSD is build in Libretto W100 series? ConcerningThomas

  • increase the resolution of 200 Hz to 1000 Hz

    I need speed my kinematic data must match the kinetic data that I use for my analysis by a factor of 5. I tried a linear interpolation, but as the ntimes value grows flattens my signal and I end up losing the shape of the data. This happens for inter

  • Reminder for Cancel-button available?

    Hello is there a way to create a sequence of reminder that runs automatically when I press the end button to stop the sequence? In this sequence, I want to disable the instruments. Thanks for help

  • OfficeJet pro 8000

    I installed a new cartridge black hp 940xl and make the message that the cartridge is not installed. What should I do?

  • password disks

    password for opening. Windows 7 Need to create a password to unlock the system Windows when the system fails to recognize the password.