The System Diagnostics

Similar Questions

• the system diagnostics report

  Hello

  I need help with the reporting system on my pc, I already looked at help section to try to understand that I had missed to correct the report.  I ran a report of diagnoses of the system 2 times and each time I do, I get the same report indicates that the Security Center has not registered an anti virus product and the need to check an anti virus product is installed and functional. I have entered the system on my pc and etc and having other things on mine, but the report is still saying there is no anti virus detected security.

  Thanks for any help.

  Regina

  Hello

  I suggest that you want to run a full virus scan using Windows Defender in offline mode, because it can help to remove hard to find malicious and potentially unwanted programs using definitions that recognize the threats.

  Definitions are files that provide an encyclopedia of potential software threats. Armed with definition files, Windows Defender in offline mode can detect malicious and potentially unwanted software and then inform you of the risks.

  http://Windows.Microsoft.com/en-in/Windows/what-is-Windows-Defender-offline

  http://Windows.Microsoft.com/en-in/Windows/Windows-Defender-offline-FAQ

  http://blogs.technet.com/b/Security/Archive/2012/09/19/Microsoft-s-free-security-tools-Windows-Defender-offline.aspx

  What is Windows Defender Offline? : http://windows.microsoft.com/en-US/windows/what-is-windows-defender-offline

  Note: There could be a loss of data while performing a mode offline scan using Windows Defender to remove viruses as appropriate.

  Response with the State of the question and we will be happy to offer you our help.

• The system diagnostics Netbook dm1 fails

  When I run the diagnostics of HP Support Assistant on my dm1 (Windows 7 Home Premium 64-bit), I get the following errors. I think that software Support Assistant itself has been updated recently, so maybe that caused the problem. What can I do to fix this?

  

  I finally managed to solve this problem in just reinstall HP Support Assistant - new. I did not uninstall first: I just install it to new 'over-the-top', but I think that the installer actually uninstall all existing versions first in any case. Problem solved - pity HP were not able to help after the initial response...

• Where are the drivers for "Microsoft Tun Miniport Adapter" (named by the System Diagnostics report), also known as "Teredo Tunneling Pseuso-Interface" (as he is called by Device Manager)?

  Microsoft Corp. has made an extremely simple task almost impossible. All MS don't research drivers, software, etc. for this show no results found. There are dozens and dozens of forums discuss many problems thereby, but not links to downloads for the drivers. Despite the many discussions that say it can't be uninstalled, they are wrong...
  After all appropriate measures in the right order without result, I did as directed and diagnosis. Archbishop of the device with the plan to reinstall later uninstalled...  Now, it is not found on my computer or on MS research.
  I have Vista Home Premium on a Compaq CQ50 Notebook, w / 160 G hd, 2 GB RAM, 1YR & 1 Mo. old.

  ALL I want is a link to download the drivers & or whatever is needed to reinstall this device in good working condition. If this is not possible, please let me know what other options I might have.
  I thank very you much for your kind consideration of this request.

  Hello danjams,

  This is no fault of Microsoft, that a driver problem to the hardware of your system. Microsoft did not make these drivers for your computer. You must visit the site Web of HP/Compaq download all the drivers/software for your make and model of system. Also never leave windows utility updated your computer's hardware. Once you have downloaded them, record them onto a cd for him come in handy should need you the in the future. Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• The System Diagnostics report what is the cause?

  Symptom:	Device is not present, not working not properly. or does not all its drivers installed.
  Cause:	A device has a configuration problem that It prevents from functioning correctly.
  Details:	The device, MpKsl052d11ad, reports 'tv_ConfigMgrErr24 '. This device won't be available until the issue is solved. The Plug and Play ID for this device is ROOT\LEGACY_MPKSL052D11AD\0000.
  Resolution:	1. check that the correct driver is installed.
  	2. try updating the drivers using Windows Update.
  	3. check with the manufacturer for an update pilot.
  	4. try uninstalling and reinstalling the device by using Device Manager.
  Partners:	Explanation of Error codes generated by Device Manager
  	Manage devices in Windows

  I'm not sure, just found by google, but have a read of:

  http://rbatko.blogspot.co.UK/2011/07/tvconfigmgrerr24-solved.html

  and

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/tvconfigmgrerr24/d09a9481-e2d3-41fc-86EB-46742be0ab65

  who seem to have messages in the same sense in them, like:

  ' Solved by removing devices and reboot the computer.
  Go into the Device Manager, select 'Show hidden devices' find it and uninstall it. »

  and

  "I went to the device and under choose

  As I say, just found by a Goolge, but if they appear similar to your problem and if no further assistance is available, it may be worth it. Or at least a peek in to see Device Manager if the devices are listed in it. If you want to play safe, back up your system first before deleting anything then you can return to where you are now if the worst happens.

• Partition HP_TOOLS after update from HP System Diagnostics (UEFI)?

  Hello

  I bought a Compaq HP 6730 s about 2 and one and a half years. Last time I installed Windows was in 2009, when I switched to Win7 Pro x 64. I usually keep my system up to date so I decided to use HP Softpaq Download Manager to see what is new because I have not done in a year about. By updating HP System Diagnostics (UEFI) I noticed the installer to begin creating a new partition using DISKPART. It has 2 GB of E:\ and created a new partition HP_TOOLS (H:\).  First of all, was it really necessary given that I had only 3.5 GB of free space on E:\? In addition, the old version of HP System Diagnostics (UEFI) has not used a separate partition. Secondly: is it really necessary to keep or is the only partition something temporary created to facilitate the update process (although this makes no sense to me), meanning can I simply delete and merge into E:\.

  Third: in the case where HP_TOOLS is not delete recomanded, at least hide by using the local Group Policy Editor?

  Thank you!

  The latest version of the installer of HP System Diagnostics (UEFI) gives an option for installation on drive hard or on a USB flash drive according to your needs. I personally recommend not not to delete the partition HP_TOOLS as its useful during the process of updating the BIOS in case if you want to do a restore etc.

  HP_TOOLS partition is also useful in F2 (the System Diagnostics) market in the case of any emergency if necessary.

• What should I do to obtain a certificate of good health in a new system diagnostics report?

  I ran the system diagnostics report, and he informed me that there is no anti-spyware and anti-virus actively protect my hp dv9000 Laptop.  I use Microsoft Security Essentials.  It seems to work smoothly again in the system diagnostics report, I am informed that there is no anti-spyware and antivirus actively protect my computer.  What can I do to fix this?

  Hi, Bj,

  The diagnostic software must be updated by the manufacturer of the computer to recognize Microsoft Security Essentials.  Be based on the status of Windows Vista security report and Microsoft Security Essentials icon status.  Ignore the rest.

  A fix has been implemented for Windows 7 same question-

  The report of health system does not detect the antivirus applications installed in Windows 7

  http://support.Microsoft.com/kb/2482947

  Windows doesn't detect all antivirus software, and some antivirus software doesn't relate its status to Windows. If your antivirus software is not displayed in Windows Security Center, and you don't know how to find it, try the following:

  • Looking for the antivirus software in the programs list on the start menu.

  • Type the name of the software or the Publisher in the search box of the start menu.

  • Look for the icon in the notification area of the taskbar.

  You can try to uninstall MSE, reboot, and reinstall the software to see if it is detected when you are finished.

• Optical drive is not recognized in Windows 8.1 (x 64) or in the UEFI System Diagnostics.

  Description of the problem:

  Optical drive is not recognized in Windows 8.1 (x 64) or in the UEFI System Diagnostics.

  Steps to recreate:

  UEFI:

  1. Start the PC in diagnosis system UEFI (F2 at the STATION)
  2. Pane controls
  3. Optical drive
  4. Sequential control
  5. Error: Optical drive not installed.

  8.1 Windows (x 64):

  1. Run Device Manager
  2. Error: No CD/DVD Drives section.
  3. Search for new hardware changes nothing.

  Relevant system specs:

  Mobile: HP Pavilion 15-n023sa (construction of vanilla)

  Optical drive: HP DVDRAM gu70n

  Steps already taken to solve:

  • Replaced the DVD drive with one of the similar specs of HP Pavilion. The replaced gn70n perfectly in the other machine. No change on problem laptop. Conclusion: DVD player works, and there is no problems with Windows 8.1 (x 64).
  • Removed DVD player. Restarted the computer. Sign in to Windows. Stop. Replace the DVD drive. Start the laptop. This is trying to solve defects of material with the PnP devices; more help to solve any problems of intermittent loose connection. Conclusion: No change.
  • Ran, troubleshooting of hardware and devices, via the control panel. Problem found: material changes may not have been detected. Explore more options just takes you through http://social.answers.microsoft.com/search/en-us/?query=hardware+device, that it is a 404 error page. Conclusion: Help and Support Windows is sorely lacking. They show no more information than just that something was detected as incorrect.
  • Ran the Microsoft FixIt troubleshooting of optical disc and auto repairman. (http://download.microsoft.com/download/F/5/8/F586FB7C-78E0-40EB-AF41-4C925F803CAF/CDDVDWin8.meta.dia... The convenience store has reported that the device was not found. He recommended to remove all power cables, power off, and various other things which have no relevance for computer laptop troubleshooting of switching equipment. He said: If the problem persists, contact the manufacturer. Conclusion: Windows troubleshooting can not solve the problem.
  • Run Windows Update to ensure that all updates and definitions have been installed. Conclusion: Windows is perfectly up to date.
  • Run a complete Rootkit and malware using Sbybot S & D 2.3 heuristic analysis. as a signature database scan using Windows Defender. Conclusion: Laptop is clean of rootkits and malware, to the best of my knowledge.

  Notes:

  The DVD player is NOT appear in Device Manager, OR in this PC.

  The DVD drive is NOT detected by diagnostics system UEFI.

  There is reference to the DVD in BIOS drive NUMBER , other than as an option of Setup, which is generic.

  The DVD player itself, works and has been verified on a different machine.

  The only possible conclusion is that the optical drive port mini-SATA on the motherboard is dead.

• voice on envy 17 and the system often hangs with blank screen and blue circle

  ENVY 17 P/N 17 t-1000 CTO Win7 IE8

  1 ICES Vo as movie dialogue comes out of the speakers.  Every minutes for about 10 seconds.

  2 MS word or Excel often will not come to the top of the bar of tasks or office.   After reboot, they will usually come from the taskbar.

  3 Itunes come from office.

  4 screen turns often white with small blue circle after clicking on an element.  It will stay this way for indefinitely sometimes requiring a forced shutdown.

  5. the problem with "solve computer problems" in the Panel.   Screen turns white with blue circle.  After several error minutes message "C:\windows\system msdt.exe the dependency service or group was able to start.

  6 Internet exp come always clicking on the taskbar.  After reboot, IE will ususally developed.

  7. the documents or files desktop happened as after a long delay.

  System is unpredictable.  Any help would be appreciated.  Support Norton has done an analysis of the system and diagnosis and system clean.  Thank you

  First remove the hard drive as the culprit in the hang ups and delays. When starting the laptop type press F2 to enter the HP Diagnostics and start a test of expanses of hard drive. It can take more than 2 hours. If the test succeeds, to focus on the software. go to msconfig, Startup tab, check turn off all startup programs, click on apply. It also seems that you need to update your graphics driver. do this at hp.com http://www8.hp.com/us/en/support-drivers.html or go to the site of graphics card manufacturer. I hope that your Windows updates are also underway. You have a lot of problems, if it is not related to a hard disk problem, full recovery would solve most of them.

• Vista will not start after update 12/9 - a patch prevents the system from starting.

  My computer has downloaded an automatic update on 09/12/09.  It restarted while I was at work, and when I got home he had just ran a startup repair function which could not solve the problem.  I tried to run the rapair again and it failed.  I tried to do a system restore on the eve of the update, but the operating system could not start again, and I was sent automatically the Startup Repair tool.

  When I look at the diagnostics, the message says "a patch prevents the system from starting.  I have no idea how to solve this problem.  Can someone please?

  PCrepair101,
  You try to use the package manager I link a few post above?  Otherwise, demarrer start from your DVD, type command prompt, and then follow the steps in method 2.  http://support.Microsoft.com/kb/940410
  If this does not fix it you can rename the pending.xml file and restart.  To do this, boot from the DVD and enter the command line.  Then type:
  CD windows\winsxs - press on enter
  Ren pending.xml pending.old - press on enter

  Then restart the system.

  You said "when I try to do a system restore, it is said that there is no previous restore point" and I was wondering if you have tried a "Startup Repair" not a system restore.  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• my laptop does not start, used HP Advanced System Diagnostics

  My computer laptop just oneday quit working, I tried the diagnostic auto and it did not help. Here is the information that I have my system diagnosis Utility

  Portable model - HP G56 notebook PC

  Product number - XG775UA #ABC

  ID system board - 1604

  Type of processor - Dual - Core AMD Athlon II P340 processor

  CPU - 2200 MHz speed

  4096 MB of total memory-

  BIOS Version - F05 Vend. Insyde BIOS

  The UUID number - 8950A7A6-FB7E-194B-9F7D-1BF3FC5115A9

  Product ID Config - 0596100000242710010020100

  System Board CT #-P X2U0 01 1Z ZK 6CD

  OS - WIN 7

  I used HP Advanced System Diagnostics, test

  Test at startup - failed

  Running test - failed

  TuneUp System - failed

  Hard drive test - failed

  Memory test - passed

  ALL SHOWED FAILURE ID 9CRGXS-5BC634-SC002K-60US3

  THANK YOU IN ADVANCE, I TRUST, THAT SOMEONE COULD HELP ME.

  Once again, thank you for your comments.

  Very grateful.

• System hangs at the screen of the system setup

  At the start of my system to start I press F2 at Dell logo to enter the configuration of the system. Once there, I can't do anything and I have to press the power button to turn off the computer. My reason to go into the system configuration is to run Dell Diagnostics because I'm having a problem with my usb ports and I lost power to my wireless adapter.

  estridge48,
  For this problem, you will need to contact Dell.  Windows does not affect screen BIOS or OEM recovery items. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems in the system due to the storm and perhaps a little help from me not knowing what to do, but try anyway.

  Detail the answers because I'm not a computer expert... Had a storm and several problems have emerged... Constant reminder that the backup recovery D is almost full... can not delete files or do not know how... language file failed for Dell dock, but it shows no access to dell don't dock because it's on a CD that is not available... the failure of this type appears for some other applications such as... Microsoft Works Task Launcher had shortened several SINGLE then icons at the top of the screen for games , email windows, internet explorer, Recycle Bin and work of microsoft: they are gone. Am able to still navigate, browse and navigate using the icons in start, all programs section. Computer works very well done otherwise, a diagnosis of equipment through Dell and it was all ok except it showed the OPU TEST - not taken in charge and PLATEAU in the TEST - not supported. Do not have a contract for coverage with Dell. Y ' All are my choices before paying for the repair and answers... I am a 70 year old and not really rich.  Thanks in advance for whatever you can do.

  JERRY BERRY

  Hello

  It's your drive D: Recovery being almost full messages.

  Your recovery Partition was photographed on your hard drive during the production of your computer by the manufacturer for all of these reasons.

  1. to reinstall Vista from in the case of a failure of the system, based on individuals or the keys at startup.

  F10 or Alt + F10 or F11 are a couple of different manufacturers use sequences.

  You will need to ask your manufacturer for proper sequence.

  2. to make the recovery disks on if your drive hard breaks down, so that you can then reinstall the operating system on a new hard drive.

  Also ask them how to make records.

  Your D: Recovery Drive is should not be used for backups, defragmented, etc..

  There are backups on an external hard drive.

  To resolve the problems that have arisen with the recovery D: Partition, you will need to contact the manufacturer of your computer to remove all that has been added to it.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Here is some information on the forums of Dell on the Dell Dock.

  http://en.community.Dell.com/support-forums/laptop/f/3518/p/19317553/19639432.aspx#19639432

  You can try to download and install it again.

  http://www.DellDock.com/

  "has several icons shortcut SIMPLE click anywhere at the top of the screen for games, windows messaging, internet.

  This should be the Dell Dock (see above link DellDock.com.).

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  For problems and test results from Dell diagnostics the best assistance would be the Dell forums.

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• After the reboot, I get Windows Vista build 6002 this copy of windows is not genuine, but the system... activation seems to be

  After a restart/virus scan (after the large recent Windows Update Microsoft), I see on the background one right part of my screen:

  Windows Vista (TM) Build 6002 this copy of Windows is not genuine.

  I looked at the system screen and it shows only: Windows is activated.

  I ran Microsoft Genuine Diagnostics tool, and it shows:
  Validation status: genuine
  Validation code: 0

  N/a for resolution state (probably because he thinks that the installation is correct).

  Don't know what the issue is here?  Does anyone know a fix for this?  I would rather have not shut down the system after 30 days of work!
  Thank you!

  According to the report that you have posted, you should not see a non-genuine problem - the report is clean.

  If you are indeed to see a non-genuine notification, then is that from time to time, or is this all the time?

  If it is present only from time to time, you have a race condition - and those can be a nightmare to solve, because they disappear as soon as you look at :) They are often caused by antivirus programs in conflict with other programs running

  If it is there all the time, then try the following.

  Vista license store is perhaps damaged or its data can be ruined somehow. Please try the steps below to re-create the store with the correct data.

  (1) open an Internet browser window.
  (2) type: %windir%\system32 in the browser's address bar.
  (3) find the CMD.exe file
  (4) make a right click on CMD.exe and select "Run as Administrator"
  (5) type: net stop slsvc (it may ask you if you're sure, select Yes)
  (6) type: cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareLicensing
  (7) type: Rename tokens.bar tokens.dat
  (8) type: cd %windir%\system32
  (9) type: net start slsvc
  (10) type: cscript slmgr.vbs - FLIR (it may take time for this will be complete, please be patient)
  (11) restart your computer twice.
  (12) you may need to enter you product key and activate it.

• Blue screen on startup, the system restore / repair did not work?

  Hi, I get a blue screen on startup and cannot start windows - with the error code x0000007E.

  I followed the steps on http://support.microsoft.com/kb/958233#StartupRepair however runs the repair does not work, and did the system restore.

  Will be saved my files / is there a way to fix this? Thank you!

  Hello

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive download collected files and after shot/screenshot.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  The system has RAID? If so, it's also very suspicious.

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E which is also 0x1000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  ----------------------------------------------------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">