Re: Satellite U400 - failed to start the system recovery

Similar Questions

• Satellite A100-00N - cannot start the system

  There were 15 months and now when I push the power button to start the system, it will not work.

  There are 2 blue LEDs lighting but the computer won start t. tried to release the battery and configure power but not luck, with the battery also no luck. On Toshiba that works is the button located under the power button (globe photo with the left and right arrows and a photo of a music note in a display of television or something) when I press this button you hear system starts but after a second or 3-4.

  Also tried to remove the memory and hard drive but still no luck.
  Anyone?

  Sorry, but there must be a serious problem, and I don't think that there is nothing you can do. The idea to start the laptop with power running is OK, but if this doesn't work and you see nothing on the screen, it must be a serious problem.

  Of course you do not give any information that you did the last days with your laptop. Maybe you tried to update BIOS?

• Satellite Pro M30 - I need the system recovery

  Hi all!

  Please I need the system for Satellite Pro PSM35E recovery.
  Where can I find it?

  Hello!

  Your laptop comes with Windows XP?
  If Yes, you can order a new disc of recovery of an authorized service provider. On the Toshiba site, you can search for them.

  The system recovery disc can t be downloaded.

  Good bye

• Satellite U400 - failed to create the recovery disk - bad DVD player?

  Hi all

  I have a 13 inch Satellite U400.
  Due to problems with my Softkeys, lighting and hibernation status (any help on thos would also be useful) I want to create a recovery DVDs with the Toshiba Recovery Disk Creator.

  The thing is: it starts when I have a CD in the DVD drive, but as soon as I put a DVD in (what is needed), it gives me an errormessage that said something like 'another application is using this drive or no disc recording where found in the laptop. 0D00E4-F0-00000000 error code).

  My DVD player does not work properly, I can play movies and the drivers and the status is ok too.
  I noticed, that error code changes, but I don't know how to get the recovery disk creator will.

  What can I do? Change something in the registry?
  I don't know what happened on my laptop, I bought a few months ago - new. I guess that, reset everything would bring my softkeys, lighting and hibernation status back.

  So, if someone nows how to work at least one of the problems, please give me advice.

  Thanks in advance,

  wiglip

  Hello

  Did you create virtual CD/DVD drives with special software? If so, remove the software completely. In addition, if you have installed burning, programs, you should check if they will be started when Windows starts and if so, disable the beginning upward. So go to start > run > msconfig > start. Here, you can disable the start of burning software (for example Nero, CD Burner XP, etc.).

  And what DVD are you using for burning? I have good experiences with DVD - R Verbatim and TDK discs. These are high-quality discs and you should try it too!

  Last but not least, you need to remove the upper and lower registry filters. It is always advisable to the problems of the CD/DVD drive:
  (1) run Regedit (start-> Run-> Regedit)
  2) go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  Depending on your problem with the keys to enlightenment that you should try to reinstall the Toshiba value added Package. This determines the buttons of enlightenment, FN keys and other special functions on your laptop. I had a similar problem with my Qosmio F50 illumination buttons and I posted something on this subject in the Qosmio forum that you should try it too!
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=165724

  Good luck! :)

• Windows 7 on Satellite A500-1EE - problems with the system recovery

  After five years of good functioning sth went wrong. The system tries to boot but lack access to a device (HARD drive?). And then tries to download files to recover. After downloading the recovery fails and the only option is to shut down the computer. How can I recover this system?

  Recovery process is very simply.
  Did you create the recovery media (DVD)? If so you can use it for recovery image installation.
  Otherwise, you can use HARD drive recovery option (F8 > to fix your computer) and start the recovery image installation.

  Please test F8 option.

  If you have any other questions you are welcome.

• Pavilion dv7: my Pavilion Dv7 laptop computer does not start the system recovery options

  So it told me to turn my phone off, then back on whilist cling the key F11. But when I do it my is laptop beep loud noise and rest on the logo hp, whilist is on this screen is says 'System recovery F11' in the lower left corner and does not move on the screen, how to fix this?

  Hi @Jaytee2 ,

  Thank you for visiting the Forums HP's Support and welcome. I read on your HP laptop and get a blank screen or black at startup. Try perform a reset.

  When you perform a hard reset note remove all USB devices. Disconnect all non-essential devices.

  Here is a linkto computer does not start for Windows 7.
  
  Here is a documentthe performance of a Windows 7 system recovery.

  Do you have records system for this laptop?

  I'd be happy to help you if necessary. How can I find my model number or product number?

  Please let me know.
  
  Thank you.

• Failed to initialize the system recovery discs.

  I have a set of DVD for Vista Home premium system recovery and I would like to re - install the original system installed at the factory which is corrupt.

  The instruction of disc is inserted into the optical drive and follow the on-screen instructions. When I do cela screen goes directly to the Explorer and lists the contents of the disks.

  I can not get the drives to run and shows nothing at all.

  Can anyone give an answer please?

  Thank you

  John crew

  Hello

  try to make the CD/DVD drive in the boot order 1

  And make sure you only set the CD/DVD drive to be 1st in the boot order to boot from the disk

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  _____________________________________________________________

  If above does not solve this the manufacturer

  It's their recovery process not microsofts

• Win 8 used to start the system recovery disk

  No fatcory can reset

  Hello

  You may need to disable Secure Boot and hardware enable in the Menu of the Bios first.

  In addition, if your HARD drive has a GUID partition table, and you want the operating system to boot from the uefi firmware, don't forget to choose the entry for the optical drive that has (uefi) in the boot manager - see "Adding value to recovery disks" in the document of HP on the following link.

  http://support.HP.com/us-en/document/c03489643

  Kind regards

  DP - K

• You try to start a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a non-Microsoft service, contact the service provider

  Ideas:

  • You have problems with programs
  • ETrying to launch a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a Microsoft service, contact the service provider and refer to the specific service-6000004 error code "... I contacted the people at VMware they say it's a problem with Windows Vista..." IAM confused pls help... .rror messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi sanjeevkode,

  Thank you for visiting the website of Microsoft Windows Vista Community.  As the question you posted typically associated with third party software / application that has its own way of program codes and call the corresponding system resources when installing and running. Therefore, I also suggest you to join the VMware Forums for the best support.

  VMware communities: http://communities.vmware.com/home.jspa

  In the meantime I suggest you try these options / methods

  IMPORTANT NOTE: Microsoft provides this information as a convenience to you. Proposed changes could lead to serious problems. Microsoft cannot guarantee that problems would be solved as a result of the suggestions. Changes to settings are at your own risk.

  Option 1: If you go to computer management, and then to the list of Services and find the VMware authorization Service, it appears as stopped? If so, you need to start

  Option 2: Try logging on as an administrator Local host during installation first workstation, rather than you connect with a domain ID

  Option 3: The question can be caused also by your security program such an antivirus or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must enable security programs new that had disabled you

  Option 4: The problem could be linked to a local or domain group policy. Make sure that the local account is defined as 'local user __vmware_user__' in the local Administrators group and the permissions of "Log on locally" and "Log on as a service.

  The two parameters are available in the "* Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment *" branch of domain group policy or local.

  Let me know if it worked.
  Hope it will be useful.

  Thank you and best regards,
  Vijay K - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• When I start the system, I get the message "failed to load Launcher dll" I hit OK and the system load and seems to work.

  I am under Windows Vista Home and when I start the system, I get the message "failed to load Launcher dll" I hit OK and the system load and seems to work. I'm afraid that something is not correct, what do you recommend? The two available Service Packs have been installed.

  Discussions were merged.

  Deleted duplicate.

  Original title: failure of the Dll

  The error seems to be a common problem with Dell laptops:

  http://en.community.Dell.com/search/#q=Lanucher%20dll&sort=rating%20desc&defaultAskForumId=0&pi1680537405=1

  It seems that apoint.exe gives the error that indicates that the problem is with the Alps touchpad driver.

  Try to uninstall the Alps touchpad driver and then install the latest version available from Dell for your laptop:

  http://www.Dell.com/support/home/ca/en/cabsdt1/product-support/product/Inspiron-1545/drivers

• FRM-18105: failed to start the help system

  Hello

  I'm in Oracle Forms 11.1.2.0 you try to start the help system and getting the error message below.

  FRM-18105: failed to start the help system.

  I have to check the registry entries or system variables?

  Thank you

  This issue is finally resolved. After I compared the FORMS_BUILDER_CLASSPATH variables in the environment vs registry Variables, I found I was missing C:\Oracle\Middleware\oracle_common\doc\online_help\oracle_forms in the registry. After that I added it it still didn't fix it. Then I found that entry C:\Oracle\Middleware\Oracle_FRHome1\jlib\ewt3.jar was pointing at my old House, so I have fixed to point to Oracle_FRHome instead of Oracle_FRHome1 and my forms launched immediately. Thanks for listening)

• Satellite L450D - 13 X does not start the system - PXE - E61: Media test failure

  Hello

  I turned on my laptop after only a day and it will not load
  As a first step, he said start the system restart or start normally,

  I chose startup repair, but it does not complete the repair.
  It now comes with a repetitive screen with PXE - E63: media test failure, check cable of
  PXE - MOF: exit ROM PXE

  I tried Googling the answer and go into the BIOS menu and to the section boot but I can't seem to change anything at work.

  There are, and exclamation mark in front of what I think is my hard drive on the screen

  ! HDD1/SSD1 TOSHIBA MK2555GSX-(S2)
  CD/DVD HL - DT - ST DVDRAM GT20N-(S4)
  FLOPPY DRIVE
  LAN

  I have nothing in the disk drive and I don't have a recovery disk.

  Any help would be appreciated

  Thanx

  Leon

  Hello

  For me, it looks like a malfunction of the HARD drive and so the BIOS can not find a bootable device and goes to the last possible bootable option which is LAN.

  The exclamation mark in front of the HARD drive indicates that there is a problem with the HARD drive so I think you need to replace the HARD drive and you need to reinstall the system.

  PS: What laptop do you have exactly?

• Satellite U400 does not start

  Satellite U400-10J does not operating system load, and it's brand new.

  I agree with the previous user. Try reinstalling the operating system. How to do that I have just described on your second thread. Check it out!

• G72-B62US: could not start the system after Go Back Windows 10-7

  I had to go back to Windows 7 from Windows 10 because I couldn't get wireless adapter to work with a Wi - Fi connection.  I was at risk of ending my window a month to roll back.  After the Roll Back Windows 7 Gets an error on startup and the blue screen of death flashes.  Windows is trying to perform the Startup Repair and fails.

  The system, I cannot get Safe Mode.  As soon as I push the power button it gives me two choices - launch Startup Repair) 1 or 2) start Windows normally

  The repair utility says:

  Startup Repair cannot repair this computer automatically.

  Under the heading view problem details, he says:

  Signature of the problem:

  Problem event name: StartupRepairOffline

  Signature of the problem 01: 6.1.7600.16385

  Signature of the problem 02: 6.1.7600.16385

  Signature of the problem 03: unknown

  Signature of the 04:21200680 problem

  Signature of the problem 05: AutoFailover

  Signature of problem 06:5

  Signature of the problem 01: NoRootCause

  The system version: 6.1.7600.2.0.0.256.1

  Locale ID: 1033

  Once I close this window I'm in HP Recovery Manager.  It gives me one of the following options:

  Microsoft System Restore - there is no restore point

  System recovery - it says to restore your computer to out-of-box state

  Reduced Image Recovery - having said that to restore your computer to a Windows clean, the software with minimal and drivers

  So now I'm dead.

  What can be done for me other that start over completely with a cost of Windows 7?

  Unfortunately, the Win10 GoBack function is showing himself to be unreliable, because you're not the only one to declare that use it has left their machine unusable - same thing happened to me and I had to restore my laptop HP recovery HP media.

  You can try following the steps in the post of recovery HP Win7., but my experience has been that the upgrade of Win10 corrupt recovery by-product information: HP PCs - performing a recovery of system HP (Windows 7) | HP® customer support

  If this does not work, you look at using HP recovery media: HP PCs - getting HP discs recovery or a USB HP recovery disc | HP® customer support

• HP stream 11-d010wm: I have a hard time to start the system it asks me the password for administrator password or power

  I have a hard time to start the system he asks me the password for administrator or power password which I don't have
  
  This is the code that I get when I entered the wrong password 3 times-(56448130) I would be grateful help
  
  Thank you!

  @dj_infiel95

  Enter 49520116

  Kind regards

  DP - K