the system of staus files

Similar Questions

• Update the system: remove left files in C:\Program Update\session\ of Lenovo?

  Downloaded updates are deposited under C:\Program Update\session\ of Lenovo.

  Can delete these files after you install the updates?

  Yes, you can delete the contents of the folder after the installation of the drivers/software. The next time that you run the system update, you will probably see that the folders and multiple files (such as XML files) under the 'session' folder will be recreated/downloaded again, but these files will not take a lot of space. You can also move the contents of the record session on a USB drive or elsewhere. That way if you need to reinstall your operating system at some point, you can install the update system and copy the content under the folder of the session again. Then, you don't have to download all the stuff once more, as Lenovo download is extremely slow.

  I don't know if it is possible to save the folder of session elsewhere and not in the system update folder. Maybe it's possible to change some registry keys or configuration files. It was never a problem for me if you ever tried to change this path. For backup using a backup program that allows to create incremental backups, then the files that is not changed will be saved only during the creation of the full backup. When the full backup is created incremental running not backup those files again unless they are changed.

• Protection of the system. Responding file or directory is not a reparse point: (0 X 80071126) if please close the property page and try again.

  Three weeks ago, I got a problem of compatibility with nero premium 7 that I installed it, so I had to remove my laptop with great difficulty! I tried restoring the system by removing, and it failed. Whenever I open the system restore, I get a message... "There was an unexpected error in the property page. "The file or directory is not a reparse point: (0 X 80071126) if please close the property page and try again. For the protection of the system disks can not be re-analyzed for the same reason.
  What is the problem and how can I solve it? System repair not even managed to solve!

  Hello
   
  We will first check if the system restore services are set to automatic and started. To do this, follow these steps.
  1. Click Start, type services.msc and press to enter.
  2. from the list of services, double-click Windows backup and Volume shadow copy services.
  3. in the Properties window, select the automatic startup type and click Start.
  4. apply the changes.
  5. try to open the system restore and check the result.
   
  If the problem continues, check if the system of protection is disabled. To do this, follow these steps.
  1. Click Start, right-click computer and click Properties.
  2. click on Protection of the system under tasks.
  3. on the System Protection tab, be sure to place a check mark under all available disks to enable system restore or to market.
  4. apply the settings and check the result.
   
  For more information, see this link: http://windows.microsoft.com/en-us/windows-vista/System-Restore-frequently-asked-questions
   
  I hope this helps.

  Kind regards
  Syed
  Answers from Microsoft supports the engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to back up and restore the system and program files to install new OS

  Hey all,.

  I recently bought a new Toshiba 1 TB HARD drive. My old WD 1 TB HARD drive was giving me the end. occasionally, I get the BSOD. In addition, on occasion, when I restart the computer it automatically runs chkdsk program and reported several bad clusters. However the chkdsk program never seems to report the bad clusters, so periodically, when I restart, it runs and bring back them again.

  I would like to the image or to back up all the files on my HARD drive problem, then do a fresh install of Win 7 Ultimate 64 bit (my current operating system) to the new HARD disk, and then restore the clone or image system and program files on the new HARD drive. I don't want to go through the process of reinstall all again, when everything seems to work very well. Given that the image of Win 7 program makes and accurate picture of the HARD drive, then use this program would cause the new installation of Win 7 Ultimate 64 bit to be replaced by the restoration of the image. Therefore, if there should be corrupted data under a bad cluster of old HARD drive, that data would not be transferred and my existing problem would be transferred to the new HARD drive.

  On the other hand, if I do a clone of disc, I'm not sure that existing programs would continue to operate on the new HARD drive and would require a new install of each program based on the new installation of the operating system Win 7! I would have then lost my time to make a transfer of program/data files to my newly formatted and freshly installed OS.

  Anyone know of any program (Acronis True Image, Paragon, Norton Ghost, Macrium Reflect, etc) that will allow you to image or clone the program and data (including the operational needs of the files such as: Win32 system files, files of activation, etc.) so that they will work properly on the new installation of the operating system?

  Any help would be greatly appreciated. Have a great day.

  Ed Wood

  "Questionable" disk formatting can hide bad sectors or replaces the original format.  It is not known if / when bad sectors could / will reappear.

  If you have a player that you suspect problems, find advanced manufacturer of the car diagnostic tools.  Go to WD wdc.com website and get their diagnostic tools Data LifeGuard, to 'really' to test your drive.

• Lost in the SYSTEM tablespace data file

  Version: 10.2.0.5
  Platform: AIX 6.1
  
  The only data in the System tablespace file is lost. The DB has crashed.
  We have the RMAN backup and the newspaper archive since the last backup of level 1.
  With RMAN, where should we go
  
  a. restore, Recover Database
  or
  b. restore, recover any SYSTEM tablespace?

  Your database must be mounted State.

  RMAN > run {}
  allocate channels ch1 disc type;
  system restore of tablespace;
  recover the system tablespace.
  SQL 'ALTER DATABASE OPEN;
  }

  Talip Hakan Öztürk
  http://taliphakanozturken.WordPress.com/

• How to operate the system Exec (Batch file) as an administrator

  Hello

  I have a batch file that I need to run. But it should work with administrator access.

  How can I run a command line by using the Exec.vi system as an administrator?

  I was able to "solve" this problem with a work around.

  I installed the 64 bit version of LabVIEW that calls the appropriate 64-bit shell to execute the TFTP call.

  I do not understand the lack of functionality in the 32-bit version and the 64-bit version seems to work.

• Firefox is unable to navigate on Windows 7 when firefox.exe is running the system of custom files

  I have a custom file system (for example, I have the code). It translates queries the file system to the network requests at the block level (not at the level of the file system as MUP). When firefox is hosted on this file system volume, it can be launched, but he is unable to browse any websites. As well as firefox.exe all DLLs and configuration files are also on this custom FS volume. Another fact to note, is that this omission is seen with all active network applications hosted on custom FS volume. But many other applications such as Winzip, Adobe Reader work very well.
  I tried following things but unfortunately none have given fruitful results or clues as to why firefox fails.
  1 disable the firewall of Windows (shut down the firewall altogether service)
  2. disable Windows 7 UAC
  3 reset Winsock using Netsh
  4. start firefox with the admin account
  Dig deeper:
  I used IrpTracker to find the failure. Firefox fails to create the socket. The socket() call goes to winsock and winsock is in turn NtCreate on '\Device\AFD '. This create call will fail leading to the failure of the socket. However, this happens not when firefox is run from the local disk based volumes with NTFS or FAT.
  Winsock network event monitor confirms it. It shows: call failed with the status code returned 0xC0000225 (STATUS_NOT_FOUND)
  Please let me know if anyone out there has clues.

  Hello

  Your post would be better in the MSDN or TechNet community.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro/
  http://social.msdn.Microsoft.com/forums/en-us/windowsgeneraldevelopmentissues/threads

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Improvement of the system: need page file, SSD install tips, etc. Win7 i7 generation

  Gents, it's been 4 years since I built my i7 LGA1155 based system and I have to type of upgrade (sh! t happens). It is not a full upgrade. I don't have enough green to buy a new vid card and am carrying on my storage drive.

  I bought a Samsung 850 Pro 256 GB SSD for my OS. The MB is an ASUS Z97 WiFi ac USB3.1 running a 4 GHz i7. The Z97 has Intel and ASMedia ports.

  
  

  My current configuration has a 120 GB for Win7, two Samsung Spinpoints SSD in RAID 0 as my D drive (my scratch disk, which has worked perfectly) and two WD black 1 TB in a RAID mirror as my E drive where I put all my videos, audio files (mirror raid because I'm insanely paranoid). I have also now a 2 TB backup Synology (external) so that the internal working paper mirror will not be necessary.
  

  
  

  So my setup will be:

  C drive: a single SSD with Windows 7

  D drive: two Samsungs in a RAID 0 (as I have now - although I will buy a large SSD on the road)

  E drive: WD Black (no more than mirror)

  Then readers of DVD and BD.

  I'm using CS5 Production Premium. That's what I have. I will not be able to level up to the end of this year or early next. Updates are no longer available normally, but apparently I can download a significant update to Adobe file and use it to manually update the CS5. I don't have this info right now (I think it is called "mul PremiereProTrial 5.0.3 Adobe UPDATE").

  
  

  It's been so long that I have installed Windows 7 (and I had my favorites on the subject so many links is now dead) I ask some advice on some details.

  My Windows 7 doesn't is selling at retail, but from 2011 so no SP1. I have already downloaded all the updates via WSUS Offline if I can do a proper update once installed Win7. This will be my first time through this method, but people swear by him.

  I know that my older Win7 installation CD will not see the new SSD, so I download the drivers for the SSD and also for my Intel and ASMedia SATA on the Z97 MB ports. I'm still not sure of exactly how this will go.

  A question I have is with the page file. I think that Windows automatically detect it on the operating system drive.

  I should he move to the D drive? I don't want to do anything that could cause me pain. My page file has always been on my C drive (if the memories are good).

  All the tips on this point and in my build system are greatly appreciated. I had so many links is dead now, so I'll try to find what I need. For example, what codecs I should download and install.

  By the way, I'm now change anything over 2 K. It is usually footage DSL, HDCAM stuff, as well as lot of Super8 who was captured 1080 p from QuickTime or ProRes files.

  for the pagefile, advice to move out of the ssd. It was at the time where the ssd did not last very long and it was an attempt to give them a longer life expectancy. now ssd last much longer is allowed to place the pagefile on ssd. When it comes to the filename of the page, you want it on a fast reader. the more memory you have at least windows will have to exchange information in RAM to the paging file. so if you have enough ram, the swap file usage will be less to reduce the wear and tear on any drive.

  codecs must be installed if used as a keeping clutter out of windows. most install quicktime for prores and dnxhd/r codec.

  Apple - QuickTime - Download and watch videos, movies, and shows.

  Avid QuickTime Codecs THE

  for windows 7, you may need to install the card drivers mother sata during the installation of windows 7, so that it can find your disks. someone asked on win7 install recently here: new construction, asking for Windows 7 install tips before you start

  There are a lot of youtube and the windows installation guides 7 online.

• Network Wontwork (har har) - advice on access to the system, and Javascript files.

  I'm on a Windows 7 computer. We are connected to a network that belongs to us but administered by a third party. Some time ago, I had learned that Javascript does not have file system tasks. Now the question is how do I overcome this obstacle? Does this mean that I should really just learn VBS instead of Javascript because of the functionality of the VBS OFS? I used a lot of MS products in any case if this is maybe the best route.

  In any case for the time being I'm not to learn a new programming language then I wonder how other people have worked around this issues. What I do is push metadata in InDesign files throughout our network. At this point, I am considering the following workflow:

  (1) open the file (s) with a batch script, know how much I can handle maximum without breaking InDesign or my PC.

  (2) manually, run the script of metadata.

  (3) repeat the step until the end of the file list. (9637 files)

  How can I clean cela a bit (BOUQUET!)? And how it would be difficult to move between VBS and JS, have the JS and VBS to get it done?

  Any help you can provide is greatly appreciated,

  I'm glad you solved.

  In case it was not altogether clear, (not sure), [a] the reason [s] failed:

  var f = 'C:\users\kstaples\desktop\core_indd\CEPE04200_CH1. INDD.

  Script alert... = / UserskstaplesDesktopCore_INDDCEPE03200A1_001.indd, no wonder that InDesign could not open the file

  Is because the backslash is an escape character Javascript string, allowing you to use, for example, \n to represent a newline, \t for a tab, etc.. If you want a literal backslash in your string literal, you should double it. So:

  var f = "C:\\users\\kstaples\\desktop\\core_indd\\CEPE04200_CH1.INDD";
  

  should do the trick. (Even if it is possible what InDesign does a backlash leader or forwardlash or something before the drive letter, I'm not really sure.)

• Loss of all control files and two independent of the system tablespace data files.

  Hello
  
  
  Loss of the controlfile and 2 data files: February 25, 2010... 15:00
  
  Database: in Archivelog mode
  
  Backup: controlfile and all (6) datafiles on February 20, 2010 and all archive logs are available up to the failure
  
  -Wanted to recover.

  Even if the controlfiles are restored from a backup, as long as the archive + online redo logs are available, you can make a FULL recovery.
  At the end of the recovery, an OPEN RESETLOGS would update the controlfile with correct information about SNA sequence # and headers of files.
  (Of course, the RESETLOGS would mean a new incarnation is created and log sequence numbers start from 1 - if you perform a backup as soon as possible after the RESETLOGS).

  Hemant K Collette
  http://hemantoracledba.blogspot.com

• Error 2: The system cannot find the specified file

  Failed to start the Windows Audio service on the local computer. Error 2: The system cannot find the specified file.

  Help, please
  Sam

  What version of Windows, including service pack (right click on my computer > properties)

  What past just before the problem arises?

  Click Start > run > services.msc > OK
  Scroll down to "Windows Audio"

  The Windows Audio service must be started and its "Startup type" should be "automatic".  If it is not started, double-click the entry and click on the Start button.  If it is unable to start the service or instead generates an error message, the file for the Audio Service may have become corrupt or deleted (although this file has to be protected by Windows File Protection).

  Search for your system (probably C :) drive
          
  audiosrv. DL (it's only one L)

  Make sure to look in the "system folders" "hidden files and folders," and "subfolders.

  You should find the audiosrv.dll (with two Ls) in C:\Windows\system32.

  If she is not there, it should be in C:\Windows\ServicePackFiles\i386

  If it's not there either, you have a file named audiosrv.dl_ in C:\i386?

• trasferring a book of 130 pg in video. PGS contain text drawings transistions & audios ARE in place. You put each where it belongs. 25 successfully accomplished of the GSP. I move audio to pg 26, the system stops suggest another software.

  Director of Windows 2.1

  Director of Windows 2.1

  =================================
  If your project includes still shots and audio...
  PhotoStory 3 can be a better application:

  PhotoStory 3 for Windows
  http://www.Microsoft.com/windowsxp/using/digitalphotography/Photostory/default.mspx

  Sounds like a question of resources of the system or audio
  file may be incompatible with Movie Maker.

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Music - wmv, wma, wav

  Might be interesting to try to create several small
  projects and save each of them in .wmv or DV - AVI
  format, and then reimport the finished collection
  video files in Movie Maker and combine them into
  the final movie.

  John Inzer - MS - MVP - digital media experience

• I can't find the system restore

  I have vista home premium - I go to Accessories System Tools, but no system retore don't program!   WHY?

  If you locate the system restore exe file...

  Start > in the search box, type system restore > upper left, right click on the system restore > cick Open File Location > which will lead you to the exe file.

• BOOTMGR image is corrupt. The system cannot start.

  Toshiba Satellite L355: MODEL No.: PSLD0U-00800 X

  Start the computer, a black screen with the wording of the "BOOTMGR image is corrupted.  The system cannot start. »

  Use the Applications/drivers, satellite L350 series windows vista Home Premium 32 - Bit SP 1 comes with the laptop in the DVD player and Toshiba Recovery and you will see the loading of the window.  After a certain time.  Screen pop up as Windows boot manager below:

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:
  1. Insert your windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."
  If you do not have the disk, contact your computer manufacturer or the system administrator.
  File:\windows\system32\boot\winload.exe
  status: 0 xC0000001
  Info: the selected entry could not be loaded because the application is missing or damaged.

  He did not show the original image from all the instructions on-screen (System Recovery option).  How the diagnosis without system recovery option to find the laptop computer component failure?  First impression of the BOOTMGR image is corrupt is the failure of hard drive, but I replaced the new hard-drive(SATA 2.5"MOMENTUS") and tried used the disc of discovery.  The result displays same window boot manager as described above.

  What is the suggestion to the exception to send to the repair shop?  Thank you

  Hello

  Your Toshiba did not come with two discs? One allows the Startup Repair - start a boot and press F12 for
  Select DVD as the boot device.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or use a Vista disc
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Unable to boot Windows vista-windows boot configuration data file is missing required information-
  Repair Corrupt Boot Manager
  http://www.troublefixers.com/unable-to-boot-in-Windows-Vista-Windows-boot-configuration-data-file-is-missing-required-information/

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair
  starting in Windows Vista problems
  http://support.Microsoft.com/kb/927392

  How to fix "BOOTMGR is missing" in Windows Vista
  http://cyberst0rm.blogspot.com/2007/04/how-to-fix-Bootmgr-is-missing-in.html

  Error message when you start Windows Vista: "the Windows Boot Configuration data file is missing.
  required information.
  http://support.Microsoft.com/kb/927391

  Vista tip: Fix error "BOOTMGR is missing" - a quick way
  http://Lifehacker.com/251733/Vista-tip--repair-Bootmgr-is-missing-error

  See this article here - to repair/rebuild using the Bootrec.exe tool Boot configuration data
  http://www.Vistax64.com/tutorials/163304-dual-boot-using-free-partitioning-software.html

  If necessary:

  Toshiba support - click on connect and contact the technical support and/or forums
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• System recovery - replace files in own Place

  HP Pavilion p6620f.  WIN 7.  I had a crash.  Had to perform a system recovery and restore factory settings.  As a result, I lost all my programs.  However, I made a backup of DVD when asked.  When I tried to decode the files in backup (.wim) 68 (some on all three of the DVD), he kept failure of satisfaction.  He failed three times in a row to the same 29% * wav file.  I then put all three DVDs in the same folder and still once he kept default, this 69% at the same time *. MDB file.  I then managed all the files (*.wim) with 7 - ZIP.  It seems that everything is present in the file system recovery, but... How can I get sorted in the correct position?  Is it still possible?  Each of the 68 files are now included in a separate folder (0.wim) becomes (C:/SystemRecovery/D-OS/filename) and (1.wim) becomes (C:/SystemRecovery/D-OS/filename) etc 68 times.

  Once again: great question is how I put back them in their ORIGINAL position on the C: drive before the crash?  Is it still possible?  If this isn't the case, I need to do a lot of reloading unwanted of my software.  I am grateful that the system is now operational even if not full as it was.  Thanks for any help on this problem of looooong.

  Thank you once again the Dragon fur,

  I did it "your way" and I'm on duty again.  I also managed the system recovery backup file and found all my files 'data '.  The only thing lost had plenty of time to fix it.  I'm old and retired, so it could have been worse.  Thank you and this forum.  Joe