System recovery - replace files in own Place

Similar Questions

• Pavilion g71-343nr: photo file recovery from a backup of the hp system recovery

  I have 5 drives from a backup system recovery HP, how to recover my pictures and my music only
  Thank you

  apsyandme

  Instructions to retrieve the files can be found in this thread: HP PCs - restore files that have been supported to the top using HP Recovery Manager (Windows 8.1). HP® customer support

  Good luck

• HP Envy 700-216: how to use the files in my System Recovery folder on my desktop?

  I had to do a recovery of the system, due to damaged or corrupted Windows files. I backed up my files on 9 DVDs. System Recovery has restored the files in a folder on my desktop, but how do I use them?

  I'm mainly interested in restoring my data to my Quicken 2010 and possibly my 2015 AutoCad.

  You are welcome.

  The only answer I have for not being able to find the files is that they can not have been backed up.  Otherwise, they should be in the folder.  I have to be honest.  I did several laps, but never made a backup of my files.  I always keep my personal data, backups of Quicken, photos, etc. on the external USB hard drives.  If the data are very important to me, I have it on at least two disks.

• How to restore files from a backup made during a system recovery?

  I have a HP Pavilion a6700y Desktop PC running Vista 64-bit. I had to do a system recovery, and I backed up my files, such as recommended.

  How can I restore them?

  Thank you

  Tiggy

  Acutally, that I found was in a folder named MINWINPC, there was a folder with the date of the backup, and that is a file named Backup.1.exe. When I ran that the files have been restored - very slowly. What you say can be applied to a different version of what I have.

  Thanks a lot for the input!

  Tiggy

• How can I get the program files deleted using CD for Windows XP system recovery?

  I used a CD to restore the system to reboot my computer and didn't back up my files.  Can I get back them?  I tried to go to the system restore, but it will not go back to the point before I ran CD.  Any suggestions?  My computer is a Dell Dim4500.

  Hello

  I suggest you to refer to this link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/i-need-to-recover-files-after-a-system-recovery/075fda9e-5398-4AC4-B612-489f90c75a09

  It will be useful.

• How can I move files system recovery to the original location?

  I use Windows 7 on a HP Pavilion P6000 series.  I believe that the Recovery Manager created Windows System Recovery Files folder on the C: drive (from .wim files) created on an external drive, and I want to move them to the original location.  Just copy or move everything to the C: drive, or is it an executable program that does this?

  Found this previous post - I guess that's the solution...

  Re: How to restore the system recovery files to their original location? (HP Pavilion p6540F desktop

  201207 04-18: 12:00 - modified on 18-04-201207:13 PM

  The backup that is used to recover only restores the files in a folder, leaving the owner to move. I agree, not the application of backup more useful, but better than nothing I guess.

• How can I recover all my files that I lost in an accident? I had to use my system recovery disk and install drivers for my computer again. I lost all my files. Is there something I can do?

  Help!  How can I recover all my files that I lost?  I was answering an e-mail message when I heard a couple of clicks then my computer off.

  I thought that my computer was destroyed.  Nothing I tried would bring it to the top, so I decided to use the system recovery disc that

  came with my computer.  I've also downloaded all the drivers for the application.  My computer is back on, but I lost everything.

  It's like putting into service with a new computer.  I had a lot of important information in the files that I lost.  I've tried everything I know to do

  without success.  Is it still possible to recover these lost files?  Thank you very much for your help!

  Hello

  I'm sorry, but when you did the recovery of the system you have disabled your hard drive of everything, including your files.

  You now have a new computer.

  You can try this program (it's free) to see if he 'can' find and recover your files. no guarantee:

  http://www.Piriform.com/Recuva

  See you soon.

• I back up my files on dvd and then do a system recovery. This deletes all files and reinstall windows vista. now I don't know how to put the files in the computer?

  Vista has a program to backup your files on dvd, but not one of put them back in after you do the system recovery?

  Hello

  see if this information helps you

  How to make a backup of your data

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems, it's in here is a forum for microsoft at the link specifically for backup questions below

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• How long does the system recovery take for lost/damaged files?

  I have a PC Compaq Presario SR5710F & have lost or damaged Windows install & maybe other files system as well.   (Win Update, etc. won't work without him).  How long does a system recovery takes to get with my 3 discs that I did on purchse from my pc?  Thank you!

  Three disk might take an hour or less but if you have hardware problems like bad memory, HDD, DVD, power recovery discs provide or bad capacitors, etc. it may never end.

• How can I transfer files saved out of system recovery folder in my computer after a recovery?

  I did a system recovery and my backup files are in a folder on my desktop system restore. I have Windows 7 as my operating system. When I click on the cd icon it shows 22 wim files and a system restore exe

  Hello

  Please find the web link below might help you solve your problem.

  How to restore backup files created during the procedure of backup F11

  Let us know how it goes!

  * Although I am an employee of HP, I speak for myself and not for HP.

  Click the White Star Kudos to say thank you *.

  Please check accept as Solution if it solves your problem *.

  Concerning

  Maton

  
  

• Unrecognized files on the system recovery CD?

  My computer started crashing quite frequently with "DRIVER_POWER_STATE_FAILURE" error about three weeks ago.  I tried defraging, clean disk upward and a fast and comprehensive analysis of the Norton computer and I tried to check the threads on some hardware, as the WLAN adapter (since recently stopped working) and it always crashes on me.  It seems to crash a lot when my internet goes suddenly to limited with little performance connectivity yellow sign on the subject, and when I go to disconnect and reconnect or simply use diagnose and fix computer freezes, then crashes.

  I hope that doing a system recovery to its original software configuration will help to stop the noise, but when I insert the first disc, as the instructions say to do, rather than get to the screen instructions, it just shows what is on the CD. As he shows me a bunch of folders with files.  I tried to click on some files and I get a message saying that the file type is not recognized...

  Hi Megan,

  I checked the landfill and found the driver causing:

  0: kd >! fffffa8003a99590 of the IORP
  IRP is active with 9 batteries 8 is current (= 0xfffffa8003a99858)
  No Mdl: No system don't buffer: wire 00000000: Irp stack trace.
  cmd flg cl device file completion-context
  [0, 0] 0 0 00000000 00000000 00000000 - 00000000

  Args: 00000000 00000000 00000000 00000000
  [0, 0] 0 0 00000000 00000000 00000000 - 00000000

  Args: 00000000 00000000 00000000 00000000
  [0, 0] 0 0 00000000 00000000 00000000 - 00000000

  Args: 00000000 00000000 00000000 00000000
  [0, 0] 0 0 00000000 00000000 00000000 - 00000000

  Args: 00000000 00000000 00000000 00000000
  [0, 0] 0 0 00000000 00000000 00000000 - 00000000

  Args: 00000000 00000000 00000000 00000000
  [0, 0] 0 0 00000000 00000000 00000000 - 00000000

  Args: 00000000 00000000 00000000 00000000
  [0, 0] 0 0 00000000 00000000 00000000 - 00000000

  Args: 00000000 00000000 00000000 00000000
  > [16, 2] e1 0 fffffa8006b9fa30 fffff80001f25670-fffffa8008933320 00000000 success error cancel pending
  \Driver\ATSWPDRV nt! PopRequestCompletion
  Args: 00000000 00000001 00000003 00000000
  [0, 0] 0 0 00000000 00000000 00000000 - fffffa8008933320

  Args: 00000000 00000000 00000000 00000000

  Image path: \SystemRoot\system32\DRIVERS\ATSwpDrv.sys
  Image name: ATSwpDrv.sys
  Timestamp: kills Aug 28 21:46:42 2007

  As you can see, the driver is too old. From what I found, this driver belongs to thesoftware of fingerprint AuthenTec . You use this software? If so, update the software please. If there is no update, delete.

  Best regards
  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• .sv2i Converter and Symantec System Recovery vCentre 5.0.0 files

  Hi all

  Im hoping some of you might be able to shed some light on this for me,

  We have one or more servers with Symantec System Recovery 2011 (ver. 10.0.1.41704) and we tried to convert files .sv2i across on an ESXi 5 server. However we seem to have mixed on conversions. To review the guide isn't too clear on if the Sys Rec 2011 is a product supported. Im hoping this is?

  When we try to recover a server we get a "source parameters are invalid" and on a second server with the same version of Sys recovery he completed the conversion, but then the server does not start.

  Anyone who has tried using the files of sv2i Symantec System recovery in this way or we're looking at a dead end?

  IM happy to provide information on both servers ddditional needs this help the situation.

  Thank you very much

  Matthew

  When we try to recover a server, you get a "source parameters are not valid.

  As you have already discovered since the Release Notes-unfortunately - is not a supported version.

  and on a second server with the same version of recovery Sys, he completed the conversion, but then the server does not start.

  If the conversion is successful, you can verify if the virtual machine has been created with the appropriate virtual SCSI controller and run the VMware Converter with the option 'Configure the Machine' for the virtual machine inject the missing drivers.

  André

• How to restore the system recovery files to their original location? (HP Pavilion p6540F desktop computer)

  I have a desktop HP Pavilion P6540F under Windows 7 Home Premium. A few days ago there was a problem with windows that virtually wiped out my OS and I had to restore my computer to factory settings. Before restoring my computer I backed up all my files on a disk. After Reinstalling windows, I placed the drive with all my files recovery on it in my computer and running the recovery .exe file that has started downloading my files. All of this worked perfectly well but the problem is that these files only stored in a file on my desktop and has not been restored to its original location. Is it possible to get these files to restore to the correct locations on my computer without having to manually, drag the files to their old location? Honestly, I don't know where many of these files were located before the restoration and many items such as preferences for certain programs are impossible for me to move. Thanks for the help.

  The backup that is used to recover only restores the files in a folder, leaving the owner to move. I agree, not the application of backup more useful, but better than nothing I guess.

• Can system table space cause multiple data files in several places?

  Hi experts,

  Our current system has a partition to keep the system tablespace data files, but I assumed that the partition is wrongly estimated and the size was maintained only 2 GB. Now the partition's got full and it seems no way to increase the partition from the OS. The only option I have is to create the new data for system tablespace file in another free partition. Is this possible? I have to consider all things important before doing this? Also can I create new data with the regular create command file or need to do something special for system tablespace?

  Thanks in advance

  Yes, you can create two data files for system tablespace into two partitions.

  To reduce the space in the system tablespace - you should check what are segments that occupy the space in the system tablespace.

  To get the examples if you have the Audit DB - then you can move the table to tablespace someother depending on availability.

• G72-250us: will not perform the system recovery

  After completing the formatting and by copying all the files on the three disks that I made, the recovery program sees no bootable device when restarting. The original hard disk drive (320 gb) cooked and I replaced it with a 250 GB ssd. Ant help or explanation would be appreciated.

  Hi there @caper84,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you have a problem with the system recovery. I'll be happy to help you.

  I found a lot of documents for this problem. Here are some help.

  Troubleshooting problems of recovery HP System (Windows 7)

  System recovery can fail or display error messages (Windows 7 or Vista)

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.