the system problem yellow circles with! in them under the devices hidden

Similar Questions

• What is the meaning of a yellow circle with the exclamation mark inside?

  In Device Manager, I have a problem with my sound card and my audio codec has the yellow circle with the! in the middle and I cannot update and correct the problem (no sound). What should I do to fix this and get my sound?

  After I uninstall and reinstall it gives me a code 10. This device can not restart.

  Cary

  This means that something is wrong.  Usually a corrupt driver.  I would like to re-insstall the newer driver avaailable

  Most often when a device does not work, it is because the driver has been corrupted.  Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Getting rid of an instance of a yellow circle with a 1 inside

  I understand that the yellow cirlcle with a 1 indicates a message has been received.

  Have searched through all my contacts and no messages can be found.

  Is it possible to get rid of this particular yellow circle it will affect future Councils.

  Thank you

  No luck there.

  However, as I was typing this answer noticed someone was trying to make contact with me and they were not on my list of contacts.

  Suddenly the 1 in the yellow circle had become 2 so still scrolling aroud bought me to the 'recent' box and there were these 2 unknown names that I blocked and am now back to normal.

  Thanks mystery solved

• Problems of LabVIEW with Test Unit under lvoop

  Hello

  I try now provided with LV2012 with a LVOOP code Unit Test infrastructure but seem to be a few problems.

  I have built a unit test for a base class in the attached draft who is the source of class (it is another class in the project as it is an example of a method for recovering, but it is not used in the unit test). My problem is that I get results that fail for one of my tests, when I think they have to work.

  Basically, the unit test is configured as follows

  Case 1) test the VI without installation VI and ensure proper operation default values

  Case 2) test VI by setting specific values in the test in VI of disassembly and also check the single release of "Source Method.vi" configuration VI

  Case 3) Test of the VI with the VI of installation using the default values and confirm them through the VI of disassembly

  When running case 2 fails and indicates that disassembly of the VI return values by default not those fed to the installation VI. I don't see why.

  As per

  

  Any suggestions?

  All the best

  David

  Hi David,

  The behavior you describe is planned. When you first call the 'Source_Method.vi' by using the 'SourceAccess Unit Test Manual.vi", the"Unit Test Manual.vi SourceAccess' creates and instance of the "Source_Method.vi". In this specific case of the VI it will boot with the default values but will then retain the values passed by the "Unit Test Manual.vi SourceAccess' until the project we closed, or specifically tell you to reset defaults. Whenever she is called by 'SourceAccess Unit Test Manual.vi' it will access this instance of it. If another instance of the "Source_Method.vi" was created by another parent it would be initialized with their default values, until crushed by the top-level VI calling. Then would he behave exactly as the instance created by the "Unit Test Manual.vi SourceAccess". Whatever your type typedef and its configuration, as long as everything is connected correctly, this should be the expected behavior when you configure things through object-oriented programming in LabVIEW.

  I hope this information is useful to your application. If you want to see a LabVIEW example that demonstrates this behavior, you should consider referring to parts of the ReferenceObject.lvproj. It is found by searching in the example finder LabVIEW object-oriented. This is accessible via

  Help > find examples.

• Satellite A100-147: problem of Bluetooth with BT dongle for mobile devices

  Hi guys, take it easy because this is my 1st post.

  I see there are some problems with BT and yes I am here with problems too!
  I recently had to reinstall XP PRO due to a virus, I ve installed all my drivers and even tried the recommended download links but nothing.
  When I load a BT2stack (tried different install x 64 etc.) installation driver, it came with small BT symbol in the taskbar, but when I clicked to toggle the box was just 'grey' and cannot be enabled.

  I noticed the code BW on the underside of my lappy is slightly different, but the a, just do not know if it s compatible with its location in the code.

  Code ends with 15WBT/DS2/LM/W... This seems ok or am I Bluetooth less!

  Whatever it is, the strange thing is I ve it works ok in the past by a BT toggle was having taken in the usb port, no probs in the past using this with my cell phone, but on the purchase of a new (old we had stood on) one mini disc 'pilot', it came with comes up with "E:\ is not accessible" and my disc drive is ok! weird but my 1st rocking didn't come with a disk and the other the box "found the new device" came it was straight forward.

  Axious even now I need this facility to work.

  Please, if anyone has a simple step-by-step tutorial for me to follow then that would be great. I m obviously missing something, but all leads come to a dying.

  see you soon... pete!

  PS. do not operate my FN + F8 but F1 etc seem to just put me on another page on this site?

  I confirm the information published by Blue2S.
  Satellite A100-147 was NOT equipped with the Bluetooth module!

  So you can not activate because there is NO BT!

• Minor problem with the New Installation of Windows 7 on my Inspiron E1705/9400 - two entries for "Base system device" under "Other devices" with yellow exclamation point

  Hello

  First of all, let me tell you about my system.   It is of a laptop Inspiron E1705/9400 with the Core 2 Duo T7400 processor clocked at 2.16 GHZ.   It has 2 GB of RAM and a hard drive on the Hitachi Travelstar nine 500 GB (7200 RPM).   It also has the GeForce Go 7900 GS video card.    Previously, it had Windows XP Professional (32 bit) and worked well.   But, I have three computers in my home and Home Office and would they work better together on my wired home network, so I'm upgrading all three to Windows 7.   My two desktops (a Dimension XPS 420 and the other Dimension XPS 430) seem like they will be no problem to upgrade to Windows 7.   But, this laptop was not on the list of Dell Windows 7 compatibility.   However, the Windows 7 Upgrade Advisor that I have downloaded and run seemed to say that it was OK to do a clean install of Windows 7 32-bit and he had only a few minor issues, where it says search the drivers updated from the manufacturer.   Initially, the laptop came with a 100 GB hard drive.   For my use, which becomes very small, so I decided to get the exact same 7200 RPM drive 500 GB size.   This will allow me to do a clean install of the 32 bit Windows 7 OS on the new hard drive and not have to wipe the old disk to do so.   I can just keep the old HD and paste it back whenever I need to get something out of it.

  So, here's my minor problem.   After the transfer of some elements off the coast of the old hard drive, I installed the new 500 GB drive and installed a cleaning of the 32-bit version of Windows 7.    I'm happy to announce that I have not had virtually no problems with installation and everything seems to work fine.   He seems a little more zippy than before and I have not met so far that doesn't seem to work.   I went through most of features and almost everything is superb.   But there is a minor problem, showing in Device Manager.   At least, I think it's a minor problem, but maybe someone can give me feedback to know if she is or not.

  In the Device Manager list, there is a category called "other devices" now and the icon shows a little white circle with an exclamation mark.    When you expand this category, you see two identical entries that say "Base system device" and the icon has a yellow circle with an exclamation mark inside.     I know from experience that it is not a good thing to see items in the device manager that have a yellow circle with an exclamation point.   I clicked on both of them and neither one really tells you what the device is, or who did what is site you would go to a driver.    On the general tab, it has the following information:

  -Device type Other devices

  Reference of the manufacturer- Unknown

                       Location     -         Bus PCI 3, device 1, function 3

  
  

  Under device status, it says the following:

                         The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information

  To find a driver for this device, click Update driver.

  Each of the entries seem to be almost the same thing... but not exactly.   The other has the location

  list PCI Bus 3, device 1, function 2... instead of function 1.   This seems to be the only difference.

  I tried the button to update the driver, but that doesn't seem to work.   No matter if you say it looks like your

  computer or to look for a new driver from the internet, it does not find anything.     As I said at the beginning,

  the system seems to work very well... but, given that I don't know what this device is or does, I might be missing something.

  He drives me crazy just have these yellow circles with exclamation point hanging out in my device manager.

  I could really use some help here.    Any ideas or help would be greatly appreciated.

  Thank you

  Bryan Ray (Richmond, WILL)

  BTW, I just downloaded and installed the driver pack from this ftp location and it worked, even for Windows 8.1 - 64 bit.

  Thanks Steve!

  Roger

• Yellow circle of blackBerry Smartphones

  On my home screen, where the notification of the received texts, emails or missed calls, displays a yellow circle with a 2 next to him appeared. What is and how do I access it? I am a new blackberry owner.

  If it is yellow/organge, a WAP push message.

  1. open your main message folder.
  2. press the Menu button (on the left of the trackball).
  3. click on view files.
  4. click on browser Push (or WAP Push Messages) messages.
  5. read or remove the messsage.

• Cannot delete a non-existent monitor that displays the devices on: VGA

  Separated from this thread.

  I am facing the same problem please someone post a solution

  Hi Sairamkoti,

  Please answer a few questions to refine the question.

  1. What are the steps you tried to solve the problem?

  2. What is the brand and model of the computer?

  I suggest you to uninstall the device hidden by Device Manager to see if that makes a difference. You can track the message suggested by "vitoux K" in the provided thread.

  How can I remove a non-existent devices and printers monitor?

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/how-do-i-remove-a-non-existent-monitor-from/75170b85-4107-4B25-9da8-8dc4d91d9634

  Hope this information helps. Response with status so that we can help you.

• I can't move the anchor points on a shape, I've drawn with the pen tool.  There are also small circles with a point in them (think focus), who they are and they are part of my problem.  If I open a new document and draw randomly everything is good, no foc

  I can't move the anchor points on a shape, I've drawn with the pen tool.  There are also small circles with a point in them (think focus), who they are and they are part of my problem? If I open a new document and draw randomly everything is good, no anchor and focus points behave.

  Bubble icons are the widgets corner. You can drag inward to round the corner. They are not part of your problem. If you want to hide them, select view > hide corner Widget. I have a hotkey defined for this menu item.

  If you see multiple bullseyes, you may have your set with the shape selected, that would prevent you from being able to move individual anchor points. Deselect the shape first, and then move the anchor with the direct Selection tool.

• the site theme is problem with firefox, but not any problem of chrome with!

  the site theme is problem with firefox, but not any problem of chrome with!
  for ex: http://haftegy.ir
  How to fix?

  Wow sorry! IM update firefox to the latest version and my problem is solved.
  Thank you very much.

• I just downloaded photos of my son's family would be dropbox and they all have a red circle with a white! mark them at the bottom of the tile. What does that mean?

  I just downloaded photos of my son's family would be dropbox and they all have a red circle with a white! mark them at the bottom of the tile.  What does that mean?

  Looks like you can see the backup status indicators:

  Check out the following links...

  Mozy - that make collections of symbol on my medium-sized icons file?
  http://support.Mozy.com/support/mozyKnowledgeBase?docid=78225

  Mozy - how to add or remove the download of MozyHome
  Status icons that appear on my data files?
  http://support.Mozy.com/support/mozyKnowledgeBase?docid=77353

• CC have reinstalled due to the failure of the system.  When opened in the image space RAW goes yellow spot, with blue background.  I reinstalled without effect.  At the opening, in RAW, the image is restored for future treatment.  Error occurs with both d

  CC have reinstalled due to the failure of the system.  When opened in the image space RAW goes yellow spot, with blue background.  I reinstalled without effect.  At the opening, in RAW, the image is restored for future treatment.  Error occurs with both dng and arw.  Ideas.

  Try the following:

  In the Camera Raw window, press Ctrl + K (Cmd + K on a Mac) to bring up the preferences.

  Uncheck the box processor graphics use.

  If that suits him, update your graphics driver may allow you to work with the checked graphics processor.

• Problem with sensitive theme, modify the links and IE

  I built an example of problem I have at work
  
  Theme 25,
  
  Build a simple application, 1 page - level tabs, right sidebar
  Create a default region.
  
  In the region to create a Popup LOV, and on the same line, another point - I used a text element
  
  Lov will work fine.
  
  Set the page template to change the links.
  
  Now the Lov fires.
  
  I think that elements of links change a console.log call - which IE cannot handle, so it does nothing.
  
  http://Apex.Oracle.com/pls/Apex/f?p=72923:1
  
  public
  welc0m1
  
  Can someone take a look and see if you can come up with a solution. It took a few days to the place where the problem seemed to be.

  Bug in 4.2.2

  Prior to this change the Java Script Debug of the tabs section a level - model right Sidebar and remove entries 'console.log' three.

• Replace the HHD with SSD as drive system problem...

  I hope someone can help out me!

  I want to improve 320GB HHD to the SSD on my X 230.
  I use mSATA as start the device identified as SATA2 (in BIOS).
  I replaced HHD DSS who is identified as SATA0 in BIOS.
  SSD is defined with the mSATA higher boot priority in the BIOS.

  Before moving to the SSD, I did a system image backup on external USB disk.

  When I start my X 230 with SYSTEM RECOVERY CD, it turns out that mSATA DISK0 and SSD is DISK1 and I can't get the image for the newly installed SSD.

  In fact, I did the same procedure that precedes. When I added mSATA, I followed the same procedure to retrieve the image system mSATA and it worked perfectly!

  What should I do?

  The easiest way to run an mSATA with a 'normal' car (HDD or SSD), the method is to remove the drive you want to boot from. Put the rest drive, restart, then the other disk (of data).

• Download "Bluetooth device driver not installed." with my mobile phone in Lenovo laptop. I could also see a yellow mark on this device in the Device Manager and a code 28 error

  I have a very serious problem about Bluetooth. And it's really frustrating. I don't know exactly what the problem with it, but my problem is as follows

  When I connect my mobile phone via Bluetooth for laptop (win 7 ultimate), my system shows the connection. Also, I see my mobile phone listed in the device window. Earlier, when I brought the computer laptop, everything seemed good, at this time, when I use it to open the device (IE to control ); a window would show the option for playing music (there was a lot of option as a 1 ' headset and speaker") and other services supported by the device. but now, suddenly somehow window appears but with in a 2 sec to disappear again. Whenever I try to open the device I get this error. I must say that it is very very frustrating as you try to move your cursor to click on audio playback on this portable display option, the window disappears. Help, please. Now, let me tell you what I tried to solve this problem.

  I have laptop Lenovo, which has something like that for bluetooth

  Broadcom Bluetooth 4.0 USB

  Microsoft Bluetooth enumerator. I have 32 bits of the system, processor i3, win 7 ultimate, one port wifi

  In the center of troubleshooting, I tried for the material of scanning that show this Bluetooth device driver not installed (I could see a yellow mark on this device in the Device Manager and a code 28 error).

  But windows cannot fix it.  I have tried multiple devices but nothing turned up. also I tried the same devices on different laptops and all of them worked very well.  I checked online trouble - shooting.but not very useful. Please don't tell me about recovery. I don't know when it happened.

  Please help me. Please give me link if there is no download needed

  Original title: bluetooth

  Hi Roger,

  You encounter the error code 28 in the device to any device manager if the driver for this device is not completely installed on your computer. I suggest you to update the bluetooth adapter driver and check if it helps.

  Refer following article which contains steps of troubleshooting for bluetooth related questions and see if the problem is resolved:

  Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device

  Note: Ignore the title of the article and also to find additional troubleshooting steps under the "more information" section.

  Please come back if you face problems related to Windows and we will be happy to help you.