The T105 server capabilities

Similar Questions

• Pre complains about SSL certificate on the exchange server

  Hello.  I just got a pre and tries to set up to communicate with an exchnage server.  Pre complains and will not set up the connection with this error message: «"SSL certificate error.» Is the date and time correct? ».  The date and time are correct, but the server is running a self signed certificate.  This causes no problems with iPhones that use a lot of people here.

  How can I fix it?  It is not all parameters for this problem.

  I spent the weekend trying to test and understand what was going on.  I found that if I nominated the e-mail server (name after HTTPS: / / in Setup) the same as the name of certificate displayed in the Certificate Manager (Launcher > Device Info > more info > Menu > Certificate Manager), the error should disappear.  The problem for me was that the name of cert in cert Manager was different from address of mail server (in my case server. [domain .local] instead of mail. ([Domain_name] .com).  The transformation it seems to use is:

  (1) find the certificate...

  (2) CN is HTTPS: / / in the installer?

  (3) If no, use error 'Verify the certificate, date and time not correct' (or whatever it is) - If Yes, go to HTTPS: / /.

  (4) Exchange requires safety pin?  If no, proceed to synchronize - if so, use error "unsupported of security policies.

  So I looked more closely CERT and it held several common names (CN) for the cert.  It seems that ANY OTHER DEVICE can filter through the list of common names, and use the one that works.  The Pre uses only (whether first or last, I don't know).

  So, there are two options for the certificate problem (I guess the 3rd is that you can return the phone):

  FIRST SOLUTION

  =====================

  (1) check the name of cert in cert Manager.

  (2) if it is a name that can be resolved DNS (i.e.  [mail]. [mywebsite]. [com]) then change this setting in your exchange installation program in the mail server field beside the HTTPS: / /.

  This will only fix it if your COMPUTER administrator has with permissions on the used field.  It is possible that an alias is used on other areas

  SECOND SOLUTION (as I have done)

  =================================

  (1) ensure that your Certification Authority is installed.  You can do it by clicking START > ADMINISTRATIVE TOOLS > CERTIFICATION AUTHORITY - OR - on a computer on your network using IE/Safari/Firefox and typing http://server/certsrv.  If the page is found, then you are installed, if not, then you will need to have installed.

  NOTE: SBS 2003 WILL AWARD A CERT TO THE IIS WITHOUT THE ROOT CA.  THIS SEEMS TO BE THE PROBLEM WITH THE AUTO CERTS GENERATED I HAD

  (2) If you have not installed it, go to this topic, it is well written to get step by step instructions how to install, create demand for cert, create the cert and install the cert (it took me about 30 min).   http://www.MSExchange.org/tutorials/SSL_Enabling_OWA_2003.html

  NOTE: IF YOU ALREADY HAVE A CERT ON IIS, YOU NEED TO REMOVE IT AS IT IS "DEFECTIVE" CERT BEFORE YOU CAN REQUEST A NEW CERTIFICATE.  YOU MAY BE ABLE TO REINSTALL OVER THE NEW CERT, BUT I DON'T KNOW

  (3) open https://mail.domain.com/exchange on your computer - display details of the cert and save the file on your desktop - if you are using a laptop, you can also install it on your laptop to use for use outside the Office (this is also a good back-up that you can use to get more later if needed again).

  (4) plug your pre in USB mode.

  (5) slide the cert and unplug the USB cable

  (6) go to cert Manager

  7) tap on the icon of "Sun" at the bottom left

  (8) press on the new file cert that you save in USB mode

  (9) to confirm that the new cert appears with the name of the correct mail server

  10) go to the e-mail program and configure the exchange account

  The above will create a REAL root cert (not IIS domain root Cert) that the Pre can work with.

  Really, I don't know that how/why Palm overlooked this possibility because they claimed so-called does not want to sell to companies who need strict security requirements.  For me, it means a small / medium company that has limited IT supports (according to the needs, pay as you or green guy with limited knowledge).  Then, why they test the GER in this environment, I'm not sure.  I bet they were tested on their own network, which has all the correct methods, best practices for the management of cert.  I guess it's like the developers that they have offended and almost lost their support until turned it over and said: 'sorry, we really want make you programs for our platform WebOS. ".  We've just been paranoid for so long salivate us when the bell rings. "They just didn't beta test this well enough.  The sad result of this is that Sprint will have to address all of the sheets because this certificate simple reading process was given only minimal recognition capabilities.

  But having said that - I'm now completely in love with my pre!

  I'm happy to try to help if you need it.  I found a lot of the forum of solutions were not enough detailed, so do not hesitate to contact.

• PowerEdge T105 server with SAS HBA PCI card compatibility model UCS - 70

  Hello

  We have a PowerEdge T105 server and want to connect Dell LTO-6 SAS Tape drive to this server.

  There are available PCI slots... but I wanted to know if this server can host this HBA card?

  Thank you

  Hello Suren24,

  Here is a link to the map you need to connect the drive LTO6 to. Accessories.us.Dell.com/.../ProductDetail.aspx

  Please let us know if you have any other questions.

• Not the DHCP server from Microsoft for Windows 7 support dhcp/tftp bootfile name based on vendor-class-identifier.

  Original title: dhcp/tftp boot file name based on vendor-class-identifier.

  I'm trying to start a Texas Instruments AM335x Evaluation Committee using the Windows 7 USB RNDIS driver.

  AM335x is an ARM Cortex-A8 microprocessor.

  I need a DHCP/BOOTP/TFTP server which is able to select the startup file to send via TFTP, based on the identifier of the provider class.

  I have this working on the host Linux-Ubuntu 10.04 LTS. 'dhcpd' is the DHCP server.  dhcpd is able to select the image file

  based on the received BOOTP message.  For this ARM system, it serves a sequence of image files: submarine - spl.bin (secondary program loader)

  then u - boot.img (bootloader) and finally uImage (Linux kernel).  The dhcpd.conf configuration file contains the following code:

  If substring (option vendor-class-identify, 0, 10) = "AM335x ROM"

  {

  file name "u-boot - spl.bin";

  }

  elsif substring (option vendor-class-identify, 0, 17) = 'AM335x submarine SPL.

  {

  file name "u - boot.img".

  }

  on the other

  {

  file name "uImage";

  }

  Thus, the dhcpd Linux BOOTP server is able to select the correct to send from the Linux host via TFTP image file.

  based on the content of the message BOOTP ('ROM AM335x', "AM335x submarine SPL" or neither of those two.)

  Y at - it for Windows 7 Microsoft DHCP server that has this capability?

  If this isn't the case, you know a server program DHCP/BOOTP/TFTP for Windows 7 that has this capability?

  Could do you using netsh?

  Thank you for your attention,

  Michael Tadyshak

  Texas Instruments

  Hi Michael,

  Welcome to the Microsoft community where you can find all the answers related to windows!

  According to the description, looks like you want to know if the DHCP server to Windows 7 has some capabilities.

  I suggest you post this question in this forum to improve assistance:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Hope this information helps. Respond us if you have any questions with windows and we will be happy to help.

• Remote access VPN with ASA 5510 by using the DHCP server

  Hello

  Can someone please share your knowledge to help me find out why I'm not able to receive an IP address on the remote access VPN connection so that I can get an IP local pool DHCP?

  I'm trying to set up remote access VPN with ASA 5510. It works with dhcp local pool but does not seem to work when I tried to use an existing DHCP server. It is tested in an internal network as follows:

  !

  ASA Version 8.2 (5)

  !

  interface Ethernet0/1

  nameif inside

  security-level 100

  IP 10.6.0.12 255.255.254.0

  !

  IP local pool testpool 10.6.240.150 - 10.6.240.159 a mask of 255.255.248.0. (worked with it)

  !

  Route inside 0.0.0.0 0.0.0.0 10.6.0.1 1

  !

  Crypto ipsec transform-set esp-3des esp-md5-hmac FirstSet

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  Crypto-map dynamic dyn1 1jeu transform-set FirstSet

  dynamic mymap 1 dyn1 ipsec-isakmp crypto map

  mymap map crypto inside interface

  crypto ISAKMP allow inside

  crypto ISAKMP policy 1

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 43200

  !

  VPN-addr-assign aaa

  VPN-addr-assign dhcp

  !

  internal group testgroup strategy

  testgroup group policy attributes

  DHCP-network-scope 10.6.192.1

  enable IPSec-udp

  IPSec-udp-port 10000

  !

  username testlay password * encrypted

  !

  tunnel-group testgroup type remote access

  tunnel-group testgroup General attributes

  strategy-group-by default testgroup

  DHCP-server 10.6.20.3

  testgroup group tunnel ipsec-attributes

  pre-shared key *.

  !

  I got following output when I test connect to the ASA with Cisco VPN client 5.0

  Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 0) with payloads: (4) SA (1) + KE + NUNCIO (10) + ID (5), HDR + VENDO

  4024 bytesR copied in 3,41 0 seconds (1341 by(tes/sec) 13) of the SELLER (13) seller (13) + the SELLER (13), as well as the SELLER (13) ++ (0) NONE total length: 853

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, SA payload processing

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing ke payload

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing ISA_KE

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, nonce payload processing

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing ID

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, received xauth V6 VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, DPD received VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, received Fragmentation VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, IKE Peer included IKE fragmentation capability flags: Main Mode: real aggressive Mode: false

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, received NAT-Traversal worm 02 VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, the customer has received Cisco Unity VID

  Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, connection landed on tunnel_group testgroup

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, IKE SA payload processing

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, IKE SA proposal # 1, turn # 9 entry overall IKE acceptable matches # 1

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build the payloads of ISAKMP security

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, building ke payload

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, building nonce payload

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Generating keys for answering machine...

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, construction of payload ID

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads of hash

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash for ISAKMP

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads of Cisco Unity VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing payload V6 VID xauth

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, building dpd vid payload

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing the payload of the NAT-Traversal VID ver 02

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, NAT-discovery payload construction

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, NAT-discovery payload construction

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, construction of Fragmentation VID + load useful functionality

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, send Altiga/Cisco VPN3000/Cisco ASA GW VID

  Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = 0) with payloads: HDR SA (1) KE (4) NUNCIO (10) + ID (5) + HASH (8) + SELLER (13) + the SELLER (13) + the SELLER (13) + the SELLER (13) NAT - D (130) + NAT - D (130) of the SELLER (13) + the seller (13) + NONE (0) total length: 440

  Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 0) with payloads: HDR + HASH (8) + NOTIFY (11) + NAT - D (130) + NAT - D (130) of the SELLER (13) + the seller (13) + NONE (0) overall length: 168

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing hash payload

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash for ISAKMP

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing notify payload

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload NAT-discovery of treatment

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload NAT-discovery of treatment

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload processing VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, useful treatment IOS/PIX Vendor ID (version: 1.0.0 capabilities: 00000408)

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload processing VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, the customer has received Cisco Unity VID

  Jan 16 15:39:21 [IKEv1]: Group = testgroup, I

  [OK]

  KenS-mgmt-012 # P = 10.15.200.108, status of automatic NAT detection: remote end is NOT behind a NAT device this end is NOT behind a NAT device

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, empty building hash payload

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads of hash qm

  Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = d4ca48e4) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 72

  Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = d4ca48e4) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 87

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, process_attr(): enter!

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, transformation MODE_CFG response attributes.

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: primary DNS = authorized

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: secondary DNS = authorized

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: = authorized primary WINS

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: = authorized secondary WINS

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Compression IP = disabled

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Split Tunneling political = disabled

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: setting Proxy browser = no - modify

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: browser Local Proxy bypass = disable

  Jan 16 15:39:26 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, (testlay) the authenticated user.

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, empty building hash payload

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, build payloads of hash qm

  Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = 6b1b471) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 64

  Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 6b1b471) with payloads: HDR + HASH (8) + ATTR (14) + NONE (0) overall length: 60

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, process_attr(): enter!

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, cfg ACK processing attributes

  Jan 16 15:39:27 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 49ae1bb8) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 182

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, process_attr(): enter!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, treatment cfg request attributes

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the IPV4 address!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the IPV4 network mask!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for DNS server address.

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the address of the WINS server.

  Jan 16 15:39:27 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, transaction mode attribute unhandled received: 5

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the banner!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for setting save PW!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: receipt of request for default domain name!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for Split-Tunnel list!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for split DNS!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for PFS setting!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the Proxy Client browser setting!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the list of backup peer ip - sec!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for setting disconnect from the Client Smartcard Removal!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the Version of the Application.

  Jan 16 15:39:27 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Type of Client: Windows NT Client Application Version: 5.0.07.0440

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for FWTYPE!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: request received for the DHCP for DDNS hostname is: DEC20128!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the UDP Port!

  Jan 16 15:39:32 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, in double Phase 2 detected packets.  No last packet retransmit.

  Jan 16 15:39:37 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = b04e830f) with payloads: HDR + HASH (8) + NOTIFY (11) + (0) NONE total length: 84

  Jan 16 15:39:37 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, processing hash payload

  Jan 16 15:39:37 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, processing notify payload

  Jan 16 15:39:37 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, in double Phase 2 detected packets.  No last packet retransmit.

  Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE has received the response from type [] at the request of the utility of IP address

  Jan 16 15:39:39 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, cannot get an IP address for the remote peer

  Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, case of mistaken IKE TM V6 WSF (struct & 0xd8030048) , : TM_DONE, EV_ERROR--> TM_BLD_REPLY, EV_IP_FAIL--> TM_BLD_REPLY NullEvent--> TM_BLD_REPLY, EV_GET_IP--> TM_BLD_REPLY, EV_NEED_IP--> TM_WAIT_REQ, EV_PROC_MSG--> TM_WAIT_REQ, EV_HASH_OK--> TM_WAIT_REQ, NullEvent

  Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, case of mistaken IKE AM Responder WSF (struct & 0xd82b6740) , : AM_DONE, EV_ERROR--> AM_TM_INIT_MODECFG_V6H, EV_TM_FAIL--> AM_TM_INIT_MODECFG_V6H NullEvent--> AM_TM_INIT_MODECFG, EV_WAIT--> AM_TM_INIT_XAUTH_V6H, EV_CHECK_QM_MSG--> AM_TM_INIT_XAUTH_V6H, EV_TM_XAUTH_OK--> AM_TM_INIT_XAUTH_V6H NullEvent--> AM_TM_INIT_XAUTH_V6H, EV_ACTIVATE_NEW_SA

  Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE SA AM:bd3a9a4b ending: 0x0945c001, refcnt flags 0, tuncnt 0

  Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, sending clear/delete with the message of reason

  Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, empty building hash payload

  Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, constructing the payload to delete IKE

  Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, build payloads of hash qm

  Jan 16 15:39:39 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = 9de30522) with payloads: HDR HASH (8) + DELETE (12) + (0) NONE total length: 80

  Kind regards

  Lay

  For the RADIUS, you need a definition of server-aaa:

  Protocol AAA - NPS RADIUS server RADIUS

  AAA-server RADIUS NPS (inside) host 10.10.18.12

  key *.

  authentication port 1812

  accounting-port 1813

  and tell your tunnel-group for this server:

  General-attributes of VPN Tunnel-group

  Group-NPS LOCAL RADIUS authentication server

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• Essbase + planning Quick Start and login to the Management Server

  I'm totally new in & Essbase, my only experience in Business Intelligence BusinessObjects Reporting/Administration and OracleBI/Oracle Data Integrator. My company is planning to create a project using Essbase and planning. I create in very little time showing some demo planning capabilities of this platform, then learn more about this technology. I have installation EMP + Essbase, Planning, and then cross EPM System Configurator. Now I need to create the new application, I guess, but I have the problem with the addition of Administration Server. After typing the host and server port response message back running. But I can not authenticate with the credentials of the administrator... I put the username and pass set up in the Essbase Administration Services of EPM System Configurator window, but I get the message:
  
  "User name or password is not correct, or there is a problem with the administration server"
  
  How can I solve this?
  
  Moreover, I will be very happy if someone gives me links to some "Wink" or demos according to the example configuration of EMP Essbase and planning

  Hello

  You can find some tutorials of planning here: http://www.oracle.com/technology/obe/hyp_fp/fp931.htm

  Gee

• new operating system mac Sierra would have all the features and capabilities that El Capitan?

  Hi all

  new Sierra mac OS is available for download. My current OS is El Capitan. If I install this Sierra he would have all the features and capabilities El Capitan has?

  As far as I know, they have not eliminated all the features; They added a few however; You can read about them here:

  https://www.Apple.com/MacOS/Sierra/

• Unable to connect to the VPN server

  Hello

  I'm on Sierra, iOS macOS 10 and Mac OS Server 5.2 (on a Mac mini).  (All dated September 21, 2016)

  Because PPTP is no longer supported, I am trying to create L2TP.  Unfortunately, when I try to connect to the server, I get the error "the VPN server has failed. Please check the server address and try to reconnect. »

  I do not think it is a problem of networking: back to my Mac is not enabled, the appropriate ports are transmission (UDP 500, 1701, 4500) and server says that the service is accessible.

  When I check the logs from the server after a connection attempt, I find:

  21/09/16 21:08:09.994 raccoon [75993]: can't find configuration.

  21/09/16 21:08:13.285 raccoon [75993]: can't find configuration.

  21/09/16 21:08:16.578 raccoon [75993]: can't find configuration.

  21/09/16 21:08:19.884 raccoon [75993]: can't find configuration.

  Any suggestions?

  Does anyone know where the configuration file is supposed to be on the server, so I can look at?

  Thanks for your help!

  Hi Rick,

  -Check that the folder/etc/racoon exist and the folder contains psk.txt and racoon.conf.

  -Installed with the operating system.

  Cheers, dwbrecovery

• where to change the outgoing server

  Just put a ssl on my outgoing server and need to update the settings for the outgoing server. It seems that this function within thunderbird is incomplete. After some googling I was able to get to a place where I could drop to the bottom of all the servers, I entered, but the option to modify one of the existing servers wasn't in the drop down menu.

  Account of the actions dropdown also lacks an option to edit an existing account.

  If I click on manage identities I can find my user and click on 'Edit', however it brings me to the same choice window drop-down menu for which account I want to choose. It's funny because I pressed a button to change the settings of the account but never I was given a chance to change anything.

  So where should we do to change the outbound servers thunderbid?

  Open the account settings.
  Outgoing/SMTP Server is at the bottom of the left pane where all accounts are included. There is a button to edit an existing SMTP server.
  It is hard to Miss once you have the account of the Actions of the menu drop down.
  There is no option in the Actions drop account to edit an existing account. You can make changes directly in the window account settings for any server incoming which are listed there.

• How can I get the smtp server to NOT expire?

  I can receive emails on account of the problem, but I can't send it. I get the message, '.. '. connection to the outgoing server (SMTP) smtp.hughes.net has expired. Try again. »

  https://support.Mozilla.org/en-us/KB/cannot-send-messages

• Error message from the mail server to start with open Manager-password

  When I start TB the password manager ask me the master password.
  When I do not write the master password directly with in 60 seconds, I get an Errormessage of the Mail-Server!
  Why connect TB for the mail server before writing the master password in the InputMask password manager?
  Pref..:
  "mail.startup.enabledMailCheckOnce", false
  "mail.server.server1.login_at_startup", true
  "mail.server.server1.check_new_mail", true
  "mail.server.server1.check_time", 30
  "mail.server.server1.download_on_biff", true
  "mail.server.server1.headers_only", false
  "mail.server.server1.leave_on_server", false
  Fig 1 is directly after starting TB
  Photo 2 is after 60 seconds

  I guess that's the effect you described:

  When I do not write the master password directly with in 60 seconds, I get an Errormessage of the Mail-Server!

  You can try to install this add-on.
  https://addons.Mozilla.org/en-us/Thunderbird/addon/StartupMaster/

  This should stop from trying to access the account before entering the password to Thunderbird.
  Note, it is in no way a measure of security.

• I would like to know how to prevent messages sent to be registered on the SMTP server

  Currently, my Thunderbird client saves a copy of all messages sent to the folder "sent", as expected. All sent messages are also stored on the Server SMTP (G-Mail in this case). To avoid having to delete them manually, I want to warn the outgoing message to be stored on the SMTP server in the first place. Currently, my account of Thunderbird for Copies and folders settings has a check mark next to the option 'Other' with a destination of the folder option sent in Thunderbird. I don't see any other parameters that could control how sent SMTP mail server handles. I use the POP service only with the G-Mail Server. What settings should be in place to prevent messages accumulate in the folder "sent" on the SMTP server account?

  I think I can now answer my own question! The question turns out to be a g-mail not delivered not a factor controlled by Thunderbird.

  Apparently g-mail can automatically a copy of all mail sent by SMTP service one account. It's a "feature" that cannot be disabled! A workaround seems to be to set up a filter in g-mail account settings for all mail with an address corresponding to your own email address and send the message to the trash folder. Items in the Recycle Bin are automatically deleted after 30 days. Google prevents the rule 30 days being modified by measure of security, but at least trashed messages for irrevocably removed in a month.

• The mail server responded: 5.7.0 must issue a STARTTLS

  I checked that the settings of the server are also STARTTLS and TB updated to the latest version, restarted the computer.
  I always get the same message
  An error occurred while sending mail. The mail server responded: 5.7.0 must issue a STARTTLS command first. Please make sure your e-mail address is correct in your account settings and try again.

  You are showing us the entry window. Try again in the main Thunderbird window.

  Perhaps have you checked the parameters of the incoming (POP/IMAP) and not the outgoing (SMTP) settings?

• Using IMAP, how to reduce the size of local disk? Emails must remain on the IMAP server.

  Problem:
  My local disk is full (even with compacting emails).

  Condition:
  I use the IMAP protocol and have a lot of emails. I want all emails to stay on the IMAP server.

  Possible solution (that I couldn't know how):
  Only show the emails in Thunderbird.

  My experience:
  Parameter to 'retrieve only messages last 30 days' doesn't change anything (no doubt because the messages are already on the drive).
  Unsubscribe and re - subscribe folders doesn't change anything.

  Any suggestions?

  Yes, I just tried it with a one-time account and, it seems, everything is OK. Messages remain on the server, but there are only a few KB, taken on the local HARD disk.

• How can I change the SMTP server to any server I want to?

  This is a common situation, and I have seen many others ask a similar question. It is a simple question, but Thunderbird does not seem to allow it. In my case, I have a choice of two mail server outgoing. I can use my hosting company Godaddy or my Internet provider, the local cable operator Charter Web. By default, Tbird uses the same mailserver incoming and outgoing, if possible, so my e-mail account has been configured to use the outgoing Godaddy server.

  I would prefer, however, to use the local server SMTP of Charter. But I can't find any way to change to that of Tbird. I could do it in Outlook Express, because both servers are listed for each e-mail account and can be changed.

  In Tbird, there is a drop down menu to choose an outgoing server, with no way to simply type in a new server. Or am I missing something? I think not, because others report the same problem. I have vague memories that awhile back, Tbird would you allow to specify all server to an e-mail account settings and then test their validity before finishing - a manual of against an automated way to set up an account.

  The main thing is I want to review the outgoing server of what I want, but it doesn't seem to be a way to do it.

  When your problem has been fixed can you mark the thread as "solved" Please?
  Thank you.