Essbase + planning Quick Start and login to the Management Server

Similar Questions

• Impossible to change my new tab page - it appears as "Quick start" and I can't change it BLAH about: config page

  When I enter on: config page and try to change the new settings of the about tab: empty it changes them, but when I opened a new tab it opens this "quick start" and it shows windows with a few sites I visit, but there is no option in which I choose if this is or a blank page. I had this option, I have not changed.

  New tab override (browser.newtab.url replacement)
  https://addons.Mozilla.org/en-us/Firefox/addon/new-tab-override/

  With Firefox 41 (and later versions), it is no longer possible to customize the
  page displayed in a new tab by the evolution of the browser.newtab.url preference
  in the about.config. Due to the fact that the hijackers abused the
  preference in the past, Mozilla has decided to remove (see bug 1118285).
  Fortunately, by removing it, Mozilla has also introduced a new API to bring
  This feature to life as an add-on. This module allows the user
  Choose a page in a new tab.

• How does the index start and end in the reference Word text VI to a word document?

  How a correlation between the index values start and end to a position or coordinate in a Word document?

  Is it a type of lookup table that will refer to a value of say '35' (to start) to a line or a particular character of the position in a Word document? There is nothing in LV help which explains nothing other than the value '-1 '.

  Hey, JayB,.

  The start and end of the Text.vi in Format Word values are the positions of the characters in the document. The values start at 0 on the first (or ASCII character such as a space, tab, or carriage return) and for each character (or the ASCII character). So for example if I wanted to "BOLD" the word "carrots" in the list below, where the values start at 0 on the word 'grocery store '.

  Grocery store:

  Apples

  Black berries

  Carrots

  Detergent

  Then I would enter a start 33 and the end of the 40s, making sure to count the ramasseherbe returns and spaces.

  I hope this helps.

  Logan H

• Records of Vista Media Center starts and stops at the wrong time

  I use Windows Vista Home Premium, SP1 and that you may have noticed that when I schedule recordings for some a particular channel, Media Center starts 2 minutes beforehand and ends 2 minutes in advance.  This affects only shows record from my local affiliate Fox - all other shows for other strings start and stop at the appropriate time.

  I checked the system clock with the start times of the shows and both are correct.  In fact, I saw one day Media Center started to record for a show that did not begin until 08:00 at 19:58 (according to the system time).  I had my TV on at the same time and was able to verify that the program in question had not yet begun, so the flow of the internet was sychned with the dissemination of local transmission.

  It's very frustrating because I miss the end of some shows and cannot always extend registration ends because I'm ordering another channel, the next hour.

  I have the same problem with the FOX network...

  -1 make sure your clock automaticly sets in the internet and update once by pressing the link (which makes that he can see the time server)...

  There are two ways you can go with this:

  -If your departure time is correct, then just go to the Planner and choose the program (or series) you are trying to install, select the recording settings (or adjustment of series) or advanced setting... There is an option to "stop recording" 1 min, 2 min, 3 min, 5 min, until 2 hours after the recording is finished... I have mine set to 5 minutes after, and she fixed it...

  -If the starting time is disabled (as mine is), to enter ERM and manuver to tasks > settings > TV > recorder > recorder defaults

  This is where you define all the flaws of the recorder, find "Start when possible" and "Stop when possible", 4 min value (max allows MCE)... Save and exit, restart the machine too...

  You should be good to go...

  PS, I just read the last sentence in your post, you must only have a tv tuner card in your machine (I have two, and that's the reason why I bought two), so you can always have a problem when recording two different channels (back to back on the same channel should work okay).

• Where can I find a copy of the Windows Vista Quick Start Guide provided with the retail version of Windows Vista?

  Where can I find a copy of the Windows Vista Quick Start Guide provided with the retail version of Windows Vista?

  I need the Guide quick start, as I have lost mine. A copy of the paper, as in a PDF file or similar.

  Hello

  You can check this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/products/home

• How can I find out what programs I should have started and what are the programs I can start myself to my computer to run correctly when starting?

  * Original title: startup

  How can I find out what programs I should have started and what are the programs I can start myself to my computer to run correctly when starting?

  Hello

  I understand you want to learn about programs, you should start your Windows startup. I will certainly help you to question.

  When you start Windows by using a normal startup startup, several applications and services automatically, and then run in the background. These programs include the base system, antivirus software, utility applications processes system and other software that was previously installed. These applications and services may cause interference when you install or run a program.

  The system configuration is a tool that can help identify problems that might prevent Windows from starting correctly. You can start Windows with common services and startup programs turned off and then reactivate them, one at a time.

  I suggest you to refer to the links below and check if this is useful:

  Using the Configuration System (msconfig)

  Perform a clean boot to determine if background programs interfere with your game or program

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.

• bought the plan of photography and to download the app from cc but still not able to install complete programs, continues to remain without subscription found

  bought the plan of photography and to download the app from cc but still not able to install complete programs, continues to remain without subscription

  Sign once Adobe Creative Cloud App and sign in again and check:

  Connect and disconnect activate Cloud Creative applications

  Always the same?

  1) go to C:\Windows\System32\drivers\etc and locate the file named hosts inside etc folder.

  Copy 2) guests of the file to the desktop and open the same thing with Notepad.

  Check if you can see all Adobe related as entries in the Hosts file 127.0.0.1 activate.adobe.com... etc?

• Photoshop CC 2015 is a line connecting the start and end of the brush strokes

  Hi guys,.

  I had a strange problem with a certain brush (size 5px, difficult tour, no shape dynamics, no transfer) in Photoshop CC 2015.1.2.

  It only happens when the drawing very fast on my Cintiq 22HD.

  The problem is PS is a line connecting the start and end of the brush strokes. I don't hold in shift or whatever it is.

  

  Here's my brush settings:
  

  I use a PC with these specs:

  Intel Core i7 - 4790 K 4.00 GHz

  ASUS motherboard

  NVIDIA GeForce GTX 970 (10.18.13.5354 driver version)

  16 GB OF RAM

  Cintiq 22HD

  Win 10
  

  Is it a question of PS or Cintiq?

  Thanks for help.

  OK, here is therefore an update.

  The problem is not at all with Photoshop or Cintiq, with Windows 10 parameters of the stylus.

  Fortunately, there is a small piece of free software that you can download called "Fix my pen" (by Smith Reddy) which defines the features of Windows Tablet PC in the registry for you (essentially by disabling everything related to it):

  viziblr - News - difficulty my pen makes your Wacom tablet JUST WORK on Windows 7

  It works fine on Win10 too.

  Now, as my original problem with Photoshop to do a line connecting the start and end of the brush strokes left, however I have another question more small that came after running difficulty my pen. The lines that I draw now are not smoothed by a software more. You can see the difference below.

  

  Fix My Pen sets a lot of things in the registry, but you cannot individually control which setting is disabled. So I guess that one of them is the cause.

  

  I expect response from Smith about it, cause I have no idea who he is.

• I'm Swedish in Sweden. And I installed Adobe for a trial period of 30 days. The menus are in Swedish, but when I want to start and then editing the language changes in Finnish, a language completely different to almost all other languages. Help!

  I'm Swedish in Sweden. And I installed Adobe for a trial period of 30 days. The menus are in Swedish, but when I want to start and then editing the language changes in Finnish, a language completely different to almost all other languages. Help!

  Hello

  This link might help: changing the language setting of your Cloud Creative applications

  Kind regards

  Sheena

• PowerCLI defining politics NTP to "Start and stop with the host" in ESXi 5

  Would appreciate any help in the definition of the strategy NTP on ESXi 5 hosts 'start and stop with the host. My script is currently using the following:

  Get-VMHost MyEsx | Get-VMHostService | where {$_.} Key - eq 'ntpd'} | Game-VMHostService-policy "automatic."

  This sets up the NTP service in "start automatically if all ports are open and stop when all ports are closed.

  "When I cange to 'MyEsx Get-VMHost | Get-VMHostService | where {$_.} Key - eq 'ntpd'} | Game-VMHostService-political ' market / stop with host"" the following is returned:

  «The possible enumeration values are "auto, On, Off«»»»

  Anyone know of a way (in PowerCLI) of the set up for the 'start and stop with host?

  OK, then you should choose politics "on".

  These are the policy values and what they match.

  

  Like this

  Get-VMHost MyEsx | Get-VMHostService | where {$_.Key -eq "ntpd"} | Set-VMHostService -Policy On
  

• local user name and password if the ACS server fails

  Hello

  I have every router and switch configuration for authentication of the connection via the ACS server.  I used these 12 lines below and it works very well.  Each engineer has their own account.

  AAA new-model
  AAA of default login authentication group Ganymede + activate
  the AAA authentication enable default group Ganymede + activate
  AAA authorization exec default authenticated if
  AAA authorization commands 15 default group Ganymede + authenticated if
  AAA accounting exec default start-stop Ganymede group.
  orders accounting AAA 15 by default start-stop Ganymede group.
  Default connection accounting AAA power Ganymede group.
  AAA - the id of the joint session

  RADIUS-server host x.x.x.x
  RADIUS-server application made
  radius-server key, regardless of

  ----------------------------------------------

  I would add to this a local username and password so that if the ACS server was offline engineers have yet to connect with a knowledge of username and default password

  username privilege 15 secret mypassword MYUSERNAME

  line vty 0 4
  local connection

  Q. How do I make ACS a first preference and connection server only local users username and password if the ACS server is down?

  Kind regards

  Kevin

  Now you have the password to enable as the fall back method:

  AAA of default login authentication group Ganymede + activate

  Change 'enable' for 'local' and the local (to the router) database of user names and passwords is used.

  The same works to activate authentication (the second line "authentication, aaa... ("in the config that you posted).

• Using the lens of departure-WLS server to start the managed server

  It is possible to start the managed server using start-server using maven plugin WLS goal?

  Documentation indicates the default value that is an administrator of the server. I tried with the next block in the pom file, but it does not recognize the command given here.

  implementation of <>

  < id > start-osb / < ID >

  pre-integration-test < phase > < / phase >

  < objectives >

  < target > start-server < / target >

  < / objectives >

  < configuration >

  < domainHome > givenpath < / domainHome >

  < command >

  osb_server1 startManagedWeblogic.cmd < param > < / param >

  < / order >

  < / configuration >

  < / run >

  Thank you

  Siva

  Hi Robert,.

  When I try to use the pom file, I get the following error. For this reason, I used the command syntax and parameters as displayed above. Even after this change, it does not start the managed server.

  [org.codehaus.plexus.component.configurator.ComponentConfigurationException: cannot assign configuration 'command' with the value entry ' ${domainHome}\bin\startManagedWeblogic.cmd osb_server1 ${adminUrl} "type java.lang.String to property of type java.lang.String]

• Running the Single Instance and RAC on the same server of different homes.

  Hi guys,.

  I already have 4 node RAC12c installed on OLE 6.

  I'm planing on some of my other 12 single instance databases on other migration for RAC nodes.

  Please correct me here if I am wrong...

  My understanding is that, to be able to use DBCA or rconfig for conversion of database instance RAC, the only instance and RAC cluster must run on the same server or machine node.

  Thanks to this understanding... Am planing on the installation of a binary single instance on one of my cluster node node1 say and then use RMAN to duplicate the single instance or just an RMAN restore from the node of the instance that is unique to this node1. Am capable of this plan must then use DBCA or rconfig to convert the CARS database.

  Now, my question is can I run a single instance and RAC on the same server for different homes with different database ports?

  2. for these unique instance that runs on the server RAC 1 node, can I use the RAC database listener that runs from the House of the grid or I have to create another auditor?

  Thank you in advance and also let me know if I can use DBCA or rconfig when the only instance and rac database are on separate nodes.

  K

  Fix. And that's what I would normally do. In general, I would have just an ORACLE_HOME directory that can be used by the punctual and RAC databases at the same time.

  See you soon,.
  Brian

• Cannot start the managed server - Urgent

  I created a Domain Admin Server (7044) and I am able to connect to the server. User later asked to create the cluster, so I created the new server (WSMS1 - 8044) and the new Cluster. For the Cluster I have given the port (7044) the admin and I targeted the data source exist also, but at present I'm not able to start the managed server using the following command in putty - «./startManagedWeblogic.sh WSMS1 http://localhost:8044".» For your information, there is another area (created by any other person) have the same configuration and it works very well.

  Help, please.

  For starting Managed Server use the below command

  ./startManagedWebLogic.shmanaged_server_nameadmin_url(UNIX)

  In your case

  ./startManagedWeblogic.sh WSMS1 http://localhost:7044 /

  Better to use the Ip address of the local host instead of typing of server

• Cannot start the managed server - unable to get the property of the transaction log.

  I have a server that is managed in a cluster to a single member. The field is simple - server admin and a cluster, the cluster member.
  
  I can boot is no longer this server. When I try to start, he left after the following message:
  
  < BEA-000362 > < server failed. Reason: Failed to get the property of the transaction log. Make sure that the migratable Transaction Recovery Service is migrated on the current server before restarting.
  
  I've checked everything I can think or offers documentation of the error. There is only one target migratable in the field, the managed server. automatic migration is not enabled. I deleted the store by default from the file system, and it gets recreated at startup (so not a problem of permission of system files). I have Activate Server registration to any Transaction scope weblogic debug debugging tab, no additional messages are coming around this message.
  
  Target only shows migratable are hosted on the managed server and not the last migration status.
  
  So I'm puzzled. Can anyone suggest what I should look at?
  
  WebLogic 10.3.5, JDK 1.6.0_29 (64-bit), RHEL 5.6
  
  Published by: SteveElkind on August 28, 2012 11:54

  Hi Steve,.

  Then remove the cluster migratable option, it will sort your problem.

  Kind regards
  Kal