The tag of the element for CSS - how to use it?

Similar Questions

• After replacing the motherboard of PC how can use the license package, is the same hard drive.

  Mr President, our pc is repaired & change the motherboard and now how to use the product under license of photoshop

  It could be cleaner if you uninstall the products in question, using the CS cleanup tool and then contact Adobe technical support via chat and ask to reset your activations before install and activate the software again.

  Adobe Creative Suite cleanup tool

  helps resolve installation for CS3 thru CS6 and creative cloud problems

  http://www.Adobe.com/support/contact/cscleanertool.html

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat

  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

  Before you uninstall, you can see if you can extract the serial number in case you don't have it at hand.

  If it's a Windows machine, and then try running Belarc Advisor

  http://www.Belarc.com/free_download.html

  For a Mac, you can try:

  https://Mac-product-key-Finder.com/

• How is Samsung TV, possible to permanently hide the message that explains how to use Air play via Apple TV?

  How is Samsung TV, possible to permanently hide the message that explains how to use Air play via Apple TV?

  Apple Tv has the conference room mode turned on causing the message to appear.  Turn it off:

  On restrictions of airtime and the mode of the conference room on your Apple TV - Apple Support

• Is there an update of the BIOS for Acer Extensa 5620ZG using windows 7 Professional.

  Is there an update of the BIOS for Acer Extensa 5620ZG using windows 7 Professional.

  Take a look at the http://www.acer.com/worldwide/ site there is only 1 listed BIOS so I don't think that there is an update.

• What is the right configuration of the port for my Photosmart C6180 using 32-bit Windows 8?

  Hi all

  I have a HP Photosmart C6180. I recently changed to Windows 8 32-bit. I downloaded the HP Windows 8 drivers, but I still have problems with the printer. In Control Panel, the printer status says "error".  I think that it could possibly be a problem with the printer port settings. So, my question is, what is the right configuration of the port for my Photosmart C6180 using 32-bit Windows 8?

  I would greatly appreciate any help you can give me. Thanks, JoeRocket

  Hello JoeRocket,

  Welcome to the HP Forums!

  I understand that your Photosmart C6180 enjoys a status of "error". I will do my best to help you! I would start by following this entire document on "Printer is off-line" Message appears on the computer and the printer does not print.

  This document provides steps to check the printer driver and port of your computer. Please post your results, I'll be looking forward to hear from you.

  Have a good night!

• What computer privileges must install and apply the updates for Creative Apps clouds using Windows 7?

  What computer privileges are required to install and apply the updates for Creative Apps clouds using Windows 7?

  When you work for a company that controls the software installed on your computer, it is important to know if IT supports is necessary to install and apply the updates when updates are available.

  It is important to know this information before you buy.

  Thank you for your support.

  ~ Paul Miller

  admin command is required for installation or any changes made to the software from your computer.

• OGG for java: how to use the token in a velocity model

  
  Hello community,

  I need help to solve my problem.

  I have an extraction process that extract data from a table only on the insert.

  I want to insert this information in a jms queue. but I need more information to reproduce, so I use sqlexec and tojken to store the information in the file exttrail.

  I use an extract data pump to read data from the exttrail file and place it in a jms queue using a velocity template.

  My question is: how to read "user fees" in a model of speed?

  Thanks in advance for your help

  Concerning

  JMBien

  Following extracted files and model speed

  -----------------------------------------------------------------------------------------------------------

  X_FR2FRH

  SUCH X_FR2FRH

  SOURCEDB SFRH

  
  EXTTRAIL O:\GoldenGate\OGG_FRH\LT_FRH\FR2\FR
  TRANLOGOPTIONS MANAGESECONDARYTRUNCATIONPOINT

  GETREPLICATES

  --H
  TABLE "dbo." " HISTO_STATUT_WKF_MSG', COLSEXCEPT (_Timestamp),
  SQLEXEC (ID performance(1), QUERY "select CrMsgId, OrdrReleaseDtTm from cmc, HISTO_STATUT_WKF_MSG hswm CORE_MSG_COMPL where hswm.") IdHistoStatutWkfMsg =? and cmc. CrMsgId = hswm. IdMsg and IdTypeWkf = 3 and IdStatutWkf = 1 ", &
  PARAMS (p1 = IdHistoStatutWkfMsg)), and
  CHIPS (ORDRRELEASEDT = @GETVAL (performance(1). OrdrReleaseDtTm), CRMSGID = @GETVAL (performance(1). CrMsgId)));

  --------------------------------------------------------------------------------------------------------------------------------------------------------------

  PFR2RJMS :

  EXTRACT PFR2RJMS
  SOURCEDB SFRH

  SETENV (GGS_USEREXIT_CONF = "dirprm/PFR2RJMS.properties")
  SETENV (GGS_JAVAUSEREXIT_CONF = "dirprm/PFR2RJMS.properties")

  
  CUSEREXIT dirprm/ggjava_ue.dll CUSEREXIT-PASSTHRU - INCLUDEUPDATEBEFORES

  -getupdatebefores

  
  getInserts

  --H
  TABLE dbo. HISTO_STATUT_WKF_MSG;

  GET_USER_TOKEN_VALUE (OrdrReleaseDtTm, 8);

  ignoreinserts

  -------------------------------------------------------------------------------------------------------------------------

  Velocity model :

  # (This is a comment) if in "operating mode, then you can remove the outer loop,
  # and have only a 'foreach' iterate over the columns in the operation.
  ##
  < numOps transaction =' ${tx. Size}' ts =' ${tx. Timestamp} ">"
  #foreach ($op in $tx)
  < action type = "${op.» SqlType}"table =" ${op. " TableName} ">"
  #foreach ($col in the $op)
  < column name = "${col." OriginalName}"index =" ${col. " Index}", isKey =" ${col.meta.keyCol} ">
  < after >$ {col. AfterValue} < / after >
  < / column >
  #end
  < / operation >
  #end
  < / transaction >

  jmbien wrote:

  ...

  I have an extraction process that extract data from a table only on the insert.

  I want to insert this information in a jms queue. but I need more information to reproduce, so I use sqlexec and tojken to store the information in the file exttrail.

  ...

  My question is: how to read "user fees" in a model of speed?

  X_FR2FRH

  ...

  TABLE "dbo." " HISTO_STATUT_WKF_MSG', COLSEXCEPT (_Timestamp),

  SQLEXEC (ID performance(1), QUERY "select CrMsgId, OrdrReleaseDtTm from cmc, HISTO_STATUT_WKF_MSG hswm CORE_MSG_COMPL where hswm.") IdHistoStatutWkfMsg =? and cmc. CrMsgId = hswm. IdMsg and IdTypeWkf = 3 and IdStatutWkf = 1 ", &
  PARAMS (p1 = IdHistoStatutWkfMsg)), &
  CHIPS (ORDRRELEASEDT = @GETVAL (performance(1). OrdrReleaseDtTm), CRMSGID = @GETVAL (performance(1). CrMsgId)));

  --------------------------------------------------------------------------------------------------------------------------------------------------------------

  PFR2RJMS:

  EXTRACT PFR2RJMS

  SOURCEDB SFRH

  SETENV (GGS_USEREXIT_CONF = "dirprm/PFR2RJMS.properties")
  SETENV (GGS_JAVAUSEREXIT_CONF = "dirprm/PFR2RJMS.properties")

  CUSEREXIT dirprm/ggjava_ue.dll CUSEREXIT-PASSTHRU - INCLUDEUPDATEBEFORES

  -getupdatebefores

  getInserts

  --H
  TABLE dbo. HISTO_STATUT_WKF_MSG;

  GET_USER_TOKEN_VALUE (OrdrReleaseDtTm, 8);

  ignoreinserts

  -------------------------------------------------------------------------------------------------------------------------

  Velocity model:

  #foreach ($op in $tx)
   
  #foreach ($col in the $op)
     
      ${col. AfterValue}
     
  #end
   
  #end
  

  In the excerpt from the source, you have two chips, ORDRRELEASEDT, and CRMSGID.  On each operation on the dbo. HISTO_STATUT_WKF_MSG, these chips will be defined.  (Other tables will not have these value tokens.) To use the chips in the model, use $op.getToken ("ORDRRELEASEDT") and $op.getToken ("CRMSGID"). Similarly for the "getenv" values defined by GG, $op.getEnv ("GGENVIRONMENT", "GROUPNAME")

  In both cases, you can first check if the value is set, ${op.isEnvSet ("GGENVIRONMENT", "the GROUPDESCRIPTION")}, or ${op.getToken("ORDRRELEASEDT").isSet ()}; for example,.

        token value: (is set? '${op.getToken("MY_TOKEN").isSet()}'): MY_TOKEN= #{if}($op.getToken("MY_TOKEN").isSet()) '$op.getToken("MY_TOKEN")' #{else} (not set) #{end}
  

  There is one caveat, however: process GoldenGate trail of data as a continuous stream, a single operation (insert, update, delete) at the same time. The only way that the GG Java adapter can "loop" on the operations in a transaction is by buffering all memory operations and then loop over them at the end (Alternatively, you can write a formatter Java custom which formats the data happens, each operation individually, and not stamp anything; but that cannot be done in speed (, assuming that you do not want to set txn as a msg JMS, rather than individual operations, sent as JMS messages.)

  In general, there are two ways to format data trail in JMS messages: an operation per message, or of a message transaction.  Using a txn/msg may seem simple, but imagine if you have a few jobs in bulk on the DB which transforms 100 millions of rows in a table in a single txn; Then, your message JMS maybe 100 MB (or several GB) in size (there is no way to know in advance). The GG JMS client might be able to send the msg (given enough memory), but it will probably lower the JMS server, or JMS clients consume the (huge) message.

  But back to what tokens: If you loop on operations in memory swabbed and make a call to "getEnv" or "getToken", these are in fact reminders of NYI "extract" and will retrieve the value of getenv/token for the current operation - that is to say, the last operation as part of the operation - which is probably not what you want.  The solution is to format each operation individually - you can do this automatically using Velocity templates if sending a msg by operation; otherwise, you will need to write a custom Java trainer that formats the message that each operation is received (not at the end of the tx), and you can still run the WAD Manager "tx" mode (i.e., sending a tx by msg) If you want.

  Other smaller points:

  • If you use GG 11.2 adapter, then you need not of the «setenv (...)» Properties); If you extracted 'foo', while it loads of 'foo.properties' from the directory dirprm automatically.
  • GET_USER_TOKEN_VALUE is not used in the file of the prm. It's a value C user-output API callback (i.e., only used if C user-output (in C) coding).  (I'm surprised that the prm file that allows here.)
  • You can delete the 'getInserts' and 'ignoreInserts', because even once which is not used in this case.  Changes/insertions/deletions are always "obtained".
  • You may need to spend in all inserts/modifications/deletions (including 'before' values) to exit user Java so that the limits of tx be properly processed; This was necessary before 11.2 Java adapter, and IIR there is a bug that prevented these filters work as expected in earlier versions of 11.2.  Alternatively, you can write filters in Java, by adding them to the file property: gg.handler.my_handler.filter = com.example.custom.MyEventFilter (where MyEventFilter implements com.goldengate.atg.datasource.DsEventFilter)

  It will be useful,

  -Mike

• How to use PS to judge the existence of a file in the directory specified and how to use PS to the directory specified for create to create the file? (javascript)

  1, how to use PS to judge of the existence of a file in the specified directory? (using javascript)

  2, how to use PS to the directory specified for create to create the folder? (using javascript)

  
  

  Thank you!

  If (Folder(/*_insert_the_path_here_*/).exists == false) {Folder(/*_insert_the_path_here_*/).create()}

• First file type of the elements for organizing items

  I use the editor and organizer of PSE13 (for photos and films). I recently bought the first elements 13 and just edited my first film.

  I would like to only first Elements of access via the Photoshop Elements Organizer, but I'm not sure what file type to save my first editing of files, so that they can be imported and marked in the elements Organizer and also played through the elements Organizer.

  I want to just run an organizer. Is this possible and what should I save my first finals as after having been edited files. (in the same way that I save a PSD file JPG once editing is finished in the element Editor.)

  Thank you

  kel30

  Your choice of export in order to comply with the support of the elements Organizer seems to limit for me. But...

  If I have a 1080 p 30 timeline in first 13 elements project editor and export it

  Publish + share

  Computer

  AVCHD

  with Presets = MP4 H.264 1920 x 1080 p 30

  This file is saved on the hard disk of the computer can be taken in organizing elements 13

  a. to view a thumbnail with a frame of the video

  and

  b. can be read in the drive of organizing items 13.

  I didn't by all export choices to unravel the formats will do the same. But this particular result of AVCHD.mp4 (1920 x 1080 p 30) is

  as described.

  What is your choice of export now and is importation of final product in organizing elements 13 showing here and reading here?

  RTA

• Get the value of the element for PL/SQL procedure

  Hello, I am very new to apex development, so this is probably a simple question.
  
  I created a procedure that uses PL/SQL to insert rows in a table. The PL/SQL work correctly when I have to hardcode values. But when I try to get the values of the form elements, the values are not inserted into the table.
  
  I'm referencing the item using the syntax: nom_element.
  What is the right syntax? Is there anything else I need to do for the element or in the procedure to get the value of the element.
  
  INSERT INTO SOURCE_ITEM (UNIQUE_ID, ORIGIN, DESTINATION, TECHNIQUE, TEAM, SMB, WATCH_FLAG, PASS_THROUGH_FLAG, DESCRIPTION, LAST_MODIFIED_DATE)
  VALUES
  (: P34_UNIQUE_ID,: P34_ORIGIN_OF_CONTENT_2, 'AAA', 'PLATFORM', ' THE TEAM X "," EMS X ","N","N",: P34_GENERAL_DESCRIPTION, SYSDATE);

  In compiled units, you must use the function of v, for example, v ('P34_UNIQUE_ID').

  Scott

• I forgot to manage the password for vista how to reset

  I changed my password for my administrator account in vista and now I am unable to connect to my computer

  No one here will help you get into a PC.  We do not know if the PC is in fact yours or not, and it is in the code of conduct for this site to help you break into a PC.  Any search engine can help you find the methodology for this, but clearly you can just insert the Windows installation CD/DVD and reinstall Windows if you can not understand.

• Need to copy audio files from a USB on the computer for transcription - how to sync and keep the original audio files on USB?

  Have the transcript very important things to do; usually get audio on the discs, but this time I had rec on a USB - has never worked with USB before, and I don't know how I copy the files on the USB key to an audio file in my computer through Windows Media.  Really of what I can do something wrong and erase/delete files on the USB key if I don't know what I'm doing.  I guess I "sync", but could someone please give me step by step on how it's done with Vista?  As you can summize, I'm "technically not contested."

  Thank you.

  Hi Tech Mom,

  If you copy and paste a file or folder, it does not get deleted in the source location. It gets deleted in the source location when you cut and paste the file or folder. The article below explains how to copy and paste a file or folder.

  Copy a file or folder
  http://Windows.Microsoft.com/en-us/Windows-Vista/copy-a-file-or-folder

  See question 5^th from the link below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Media-Player-sync-frequently-asked-questions

  I hope this helps.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• value of the element is not common when used in dynamic action

  I'm learning the 5 apex and I wanted to create a page that would update the fields in a record by entering the unique id of the recording using a dynamic action with plsql.

  When I click on the button update the value of the element of the text uses the previous value and not the input current. The 'works' update, but the ID values are not appropriate.

  How can I make sure that when I click on the update button, the dynamic action will get the current value of the text element and not the previous (when the page was submitted)?

  I created a quick demo or what I was testing in apex.oracle.com and always gives me the same result.

  dacoellov wrote:

  I'm learning the 5 apex and I wanted to create a page that would update the fields in a record by entering the unique id of the recording using a dynamic action with plsql.

  When I click on the button update the value of the element of the text uses the previous value and not the input current. The 'works' update, but the ID values are not appropriate.

  How can I make sure that when I click on the update button, the dynamic action will get the current value of the text element and not the previous (when the page was submitted)?

  I created a quick demo or what I was testing in apex.oracle.com and always gives me the same result.

  What dynamic action event and what types of action are involved here? Provide details, or better yet share identification information of developer comments for the apex.oracle.com workspace so that we can see the demo.

  If the dynamic action executes an SQL statement or a PL/SQL process on the server that requires page updated element values in session state, specify these items as part of dynamic action Page to submit items .

• Remove the battery for long term industry uses on Qosmio

  Hi everyone, I remember reading somewhere that if you use your laptop on the sector for a long time (which I do now), it's a good idea to remove the battery to extend its life when you use it on battery power only.

  Is this true and will it void warranty or something like that or break my laptop?

  Thank you very much

  I put t see any reasons why you shouldn't t remove the battery when you want to run Notepad on the main power supply.
  I also think that this procedure will increase the performance of the battery life for a longer period.

  The guarantee must be valid. Please see also the drums section in the user manual.
  There you will find plenty of information and how to manage the battery

• How to return a query all the elements for an LOV if I select the "white point" (in this LOV)

  Hello. In my application, I have a classic report where, in a region, I built a toolbar with three Popup LOVs which interact with the report. Each LOV displays different items and returns the value according to the selected item.

  For example:

  Popup LOV 1 named P33_DEPARTMENTS has the following components: production, development, projecting, ecc.

  Popup LOV 2 named P33_LOCATIONS was the following: Europe, America, Asia, Africa, ecc.

  
  

  Popup LOV 3 named P33_DEVICES has the following: printer, keyboard, mouse, monitor, ecc.

  
  

  If I query the table to return the lines according to the selected in these LOVs I have something like this:

  
  

  SELECT * FROM < table > WHERE the dep =: P33_DEPARTMENTS AND loc =: P33_LOCATIONS AND dev =: P33_DEVICES

  
  

  Now I want that if the user selects all values (LOVs one white point) (or all), then the query must return all values for that LOV.

  For example, if for the named LOV P33_DEPARTMENTS 'white' value is selected, then the query must return to the table lines this cointain values "production ' OR 'developing' OR 'project', ecc for the columns named"dep".

  This means that must be the operator AND between LOVs but the operator or inside the LOV even, if the item is selected.

  
  

  How is it possible? Thank you
  

  SELECT *
  FROM T
  WHERE dep = nvl( :P33_DEPARTMENTS, dep)
    and loc = nvl( :P33_LOCATIONS, loc)
    and dev = nvl( :P33_DEVICES, loc)
  

  You just need to ensure that, when no value is selected, the LOV will return a NULL value.

  MK