the task not taken in charge (DAQmx)

Similar Questions

• type of file, because the flow is not taken in charge or that there is a network error windows medi aplayer

  Original title: where should I go to report a question regarding a problem with Windows Media Player?

  Hello - I just upgraded my RealPlayer and I discovered that I can't read http://217.147.235.114 or http://folkradio.ge stream in Windows Media Player now - I either get a message saying that the file for the stream type is not taken in charge, (play the stream in RealPlayer).  I also noticed that one of the icons on my desktop to an audio file (barabombi.rm) has changed its former VLC icon to an icon of RealPlayer.  What happened, and how could I have Windows Media Player return as my default player for Folk Radio and VLC as default player for an audio file please?  Thank you!

  Hi Khevsur,

  · What version of windows media player installed on the computer?

  Try the steps listed in the link below and check if it will help: Windows Media Player Invalid File Format Error Message: http://support.microsoft.com/kb/234019

  To change the default program, you may consult: change the program by default, Windows XP uses to open a specific file type: http://www.microsoft.com/windowsxp/using/setup/hwandprograms/filetype.mspx

• After installation of Medal of Honor in Windows 7, get the error DXGI_ERROR_UNSUPPORTED (not taken into "charge.").

  Original title: NEED HELP PLEASE

  Hello

  I installed the game Medal of Honor - Warfighter on my desktop pc with Intel(r) G41 Express Chipset. I have 2 GB DDR3 RAM & P4 Dual Core E5400 2.70 GHz CPU. I received the error message: failed to create D3D Device of at least 10.0 on adapter "Intel(r) G41 Express Chipset 'chauffeur 'Unknown'. The error is DXGI_ERROR_UNSUPPORTED (not taken into "charge."). I don't have any video card.

  I tried separately installation of DirectX 11, but the problem is not resolved. I use Windows 7 Ultimate x 86

  Kindly help me.

  Castelbajac

  ReadyBoost was intended to give a boost to the systems where only 1 GB has been installed and some of the RAM was shared with the video.

  This is no replacement for actual physical RAM, which is what your system needs for the game...

• HTC One. Flash Player not taken in charge by the device?

  Hi I just got a HTC that comes pre loaded with flash player 11. However when I'm going to use Flash on a Web site, what happens with either you need to download flash or plug not taken in charge? When I check to see if there are updates are not. I can't uninstall because it is a system on the phone application. When I check on the applications section of the settings, it shows the app as 0 MB which seems strange, but maybe because it is pre loaded? What can I do? Any ideas anyone?

  Please see this page for a list of all certified devices:

  Flash Player certified devices

  If your device is supported, this FAQ will guide you through the process to install/update manually the plugin:

  How to manually install Flash Player on my Android device?

• I wanted to install an optifine download, but when I try to install on adobe reader, it is said file is not taken in charge or damaged

  I need optifine but my player says adobe file is not taken in charge or its damaged, so I can't get the optfine I wanted to

  Hi peytonrowles1223,

  As Pat says, Adobe Reader opens PDF files only. I think you may have better luck contact Optifine to find out why it does not work as expected: https://optifine.net/home.

  Best,

  Sara

• javax.mail.AuthenticationFailedException: LSE required but not taken in charge

  I found the stacktrace following in my console log file.
  
  javax.mail.AuthenticationFailedException: LSE required but not taken in charge
  at com.sun.mail.pop3.POP3Store.protocolConnect(POP3Store.java:208)
  at javax.mail.Service.connect(Service.java:295)
  
  Does this mean that Javamail does not support the LSE or does not support the server?
  Is there a solution for this?

  In other words, that it is not supported by the server.

  If I see the JavaMail code, the fact that the LSE is actually used is controlled by a javamail 'mail.pop3.starttls.enable' property, which by default is false. So it has to be set somewhere, perhaps in a javamail.properties file or a file of configuration of application server or something. My knowledge of JavaMail is too raw to be able to answer this question.

• error: IMG-00705: not taken in charge or corrupted entry format

  I am trying to download a dwg document in database (using the form to the apex), and I get this error:
  
  ORA-29400: data IMG-00705 cartridge error: not taken in charge or corrupted entry format
  
  Only, I get this error when I download this document from computer with a software of CAD (dwg file is a CAD file).
  I get this error when I download a dwg file from another computer (without additional software CAD).
  
  Can someone help me with this problem?
  
  I don't know if it's useful, but it's the process that is triggered by my apex form to download a document:
  
  FUNCTION UPLOAD_DOCUMENT)
  FILE_N VARCHAR2,
  DOC_NAME VARCHAR2,
  DATE OF DOC_VALID_TO,
  t_type varchar2 default null,
  DOC_TYPE_ID INTEGER DEFAULT NULL) RETURN INTEGER IS
  number of l_file_id;
  l_thumb blob.
  l_file blob.
  l_mime_type varchar2 (100);
  l_version varchar2 (20): = ' 1.0';
  BEGIN
  
  Select mime_type, blob_content IN l_mime_type, l_thumb
  of wwv_flow_files
  where name = FILE_N;
  l_file: = l_thumb;
  
  IF UPPER (LPAD(l_mime_type,5)) = 'IMAGE' THEN
  ordimage. Process (l_thumb, 'maxScale = 125 125');
  ON THE OTHER
  l_thumb: = NULL;
  END IF;
  
  Select T_DOCUMENT_SEQ.nextval in the double l_file_id;
  
  INSERT INTO T_DOCUMENT
  + (annual, doc_name, doc_mimetype, doc_file, +)
  doc_valid, doc_size, DOC_THUMBNAIL, DOC_SYNONYM, doc_type,
  doc_last_version, DOC_TYPE_ID)
  Select filename, l_mime_type, l_file_id, l_file,
  DOC_VALID_TO, doc_size, l_thumb, t_type, DOC_NAME
  l_version, DOC_TYPE_ID
  of wwv_flow_files, where name = FILE_N;
  
  INSERT INTO T_FILE
  + (FLE_DATE, FLE_FILE, FLE_DOCUMENT_ID, FLE_TYPE, FLE_VERSION) +.
  VALUES
  + (Trunc (sysdate), l_file, l_file_id, 'DOCUMENT', l_version); +
  
  IF UPPER (LPAD(l_mime_type,5)) = 'IMAGE' THEN
  
  INSERT INTO T_FILE
  + (FLE_DATE, FLE_FILE, FLE_DOCUMENT_ID, FLE_TYPE, FLE_VERSION) +.
  VALUES
  + (Trunc (sysdate), l_thumb, l_file_id, 'THUMB', l_version); +
  
  END IF;
  
  delete from wwv_flow_files where name = FILE_N;
  
  COMMIT;
  
  RETURN l_file_id;
  
  END;

  This error is probably triggered by the call to ordimage.process. Have you been able to verify that? Since dwg is not a supported format, an error would be raised during a call to process.

  If so, is it possible that l_mime_type is different in the two cases? While where the error is not ordimage.process relief is not called?

  An image of type dwg can be charged even if it is not a supported format. But it cannot be processed.

  Melli

• After I installed Windows 7 on HP laptop, get the message "not plugged in charge."

  Same laptop, charger even worked well in Visa. After a clean install of Windows 7, I get the message "not plugged in charge."

  On my system:
  HP / Compaq Mobile Workstation 8510w
  The charger is intended to be used for an additional cost / secondary battery - which worked fine under Vista when connected to the laptop. Still, ordinary charger works fine in Windows 7.

  So my question: must be unwanted software in Windows 7. Somehow, she acknowledges that it is not the normal charger and refuses to use it - but since it worked fine under Vista I would like to continue using it.
  How can I do this in Windows 7?

  Concerning
  Wolfgang

  I had the same problem with my Compaq after upgrade of a cell of 12 after battery box white market. What I did first, was I uninstalled and reinstalled ' Microsoft ACPI - control method battery compatible "and who did not work, so I followed the following steps:

  1. a laptop battery and remove (while on).

  2. open the lid and remove the AC adapter / CC (for again, turn off the system)

  3. close the lid and plug in the battery

  4. open the cover, plug the AC adapter and turn on.

  After I did the above, my system began to charge the battery. Some people say that after step 2, shut down the system before you unplug it from the AC. I don't have because most of the solutions I found does NOT shut down the system first. If you've been careful with your system, this time above should not do harm to your laptop

  Matt102

• component AF:deck not taken in charge by the Cloud Computing service

  Hello

  In my services-> library of the adf.oracle.domain is an older version. its not to support new tags. currently his 11.1.1.2.0 and his af:deck not taking in charge.

  So, how is it possible to retrieve this version?

  Should I try to import this library?

  Thanks in advance

  Unfortunately, I don't think that you will be able to use the component. Oracle JDeveloper and Oracle ADF 12 c (12.1.3.0.0): new features it lists as a new component:

  New component of af: deck: this new stream of container that shows a child element at a time and allows the transition between children comes alive (ie. fade, slide in).  See the demo of bridge and documentation for more details.

  The Cloud Computing service however supports:

  Oracle Application Development Framework (ADF) 11.1.1.7.1 applications are supported.

  Oracle JDeveloper and ADF 12 c (12.1.3) supported systems also indicates:

  ADF applications cannot be deployed to Oracle Java Cloud Service - SaaS Extension at this time. Service Cloud Computing Java is configured for the 11.1.1.7.1 ADF. To develop and deploy applications for Service Cloud Computing Java ADF, you must 11.1.1.7.1 JDeveloper.

  The available components are documented in the Oracle Fusion Middleware tag Reference for Oracle ADF Faces 11 g Release 1 (11.1.1.7.1). Also I do not manually update the ADF libraries is supported.

  --

  Jani Rautiainen

  Relationship with the developers of Applications in fusion

  https://blogs.Oracle.com/fadevrel/

• PID (FPGA) not taken in charge in an FPGA to States transitions?

  I'm currently testing a PID (FPGA) vi in a statechart designed to run on the FPGA, but its gives me the following error.  Am I missing something, or does the PID (FPGA) really not work when you use it in an FPGA to States transitions?

  Thank you

  

  OK, so it turns out that it is a confusing error message/situation. In fact, it is related to the autopreallocate parameter. If you drop PID (FPGA) on a regular VI in a FPGA target and clear the autopreallocation, the VI stops with the same error message.

  Then to use PID in your custody/action States transitions, go to the Properties tab in the configuration dialog box, check the option to autopreallocate and drop the PID. LV will still show the error, because we do not change the setting of autopreallocate until you click OK. If you reopen the configuration dialog box, the error "not supported on target" should be gone.

  I hope this helps.

  -Nick

• What the resolution is taken in charge by video?

  I'm downloading a lot of my videos from my devices (iPhone, GoPro and Canon 5 d). I see that my file formats are supported - but I wonder what the resolution is taken care of and used.

  In particular:

  -Download the file again later - this is the original file?

  -When the streaming - y at - it took maximum supported continuous resolution?

  Helge-

  Videos are saved to Revel in their original format. When you download the video of Revel in your computer, you can download the original format. For reading online, we have also to build and save the different video formats in 720 p and 360 p H264 with mp4 extension.

  Guinot

• The request is not taken in charge (0 x 80070032) while trying to make a backup on an external hard drive

  Original title: the request is not supported (0 x 80070032)

  This is the answer I get trying to external and hard disk backup.

  • I have all of the products norton... I use ms essentials
  • My hd is big enough for this make upward
  • I use power power ac

  Hello
   
  Remember to make changes to your computer before the problem?
   
  Follow these steps and check if the problem persists.
   
  Step 1:
   
  You can check if the backup and restore services are started when you try to make a back up of files.
   
  a. click on start
  b. in the start search box, type Services
  c. click right on - RUN as ADMINISTRATOR

  These are the services that must be running when you try to make a return to the top.

  Automatic started Windows event log
  Task Scheduler started auto
  Backup Windows stopped manual
   
  Step 2:
   
  You may want to consider temporarily disabling your security software and then try to save.
   
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 3:

  I would also say that you check your disk for errors.

  Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  WARNING:
  Important: All performing hard disk the disk check if bad sectors are found on the disk hard disk check is trying to repair this area if all available on which data may be lost

  Let us know.
   
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Now my device is not taken in charge, but the sooner he used to run.

  I want to ask that with an older version of mozilla, it allows to launch on my htc explore a310e android 2.3 gingerbread.
  But now, it does show that this device is not compatible why?
  Thank you and try to make it compatible for gingerbread too.

  Hmmm, I don't see on the list here, but the same device may have different names in different countries: Will Firefox work on my mobile?

  Android still allows installation from outside the game store? The latest mobile Installer is available here if you want to try it: http://ftp.mozilla.org/pub/mozilla.org/mobile/releases/latest/android/

• I loaded a new Firefox because F does not open. This new Firefox does not open. Not at all. The Task Manager shows some charges, but F not open. I rebooted, cleaned the registry, but F does not work.

  F earlier crashed, crashed etc. Now it does not start.
  I checked the virus etc.
  When I started a new load, no question of Add-ons or anything.

  Maybe firefox hangs do not crash

  • See Firefox crashes or does not - how to fix

• Tecra M10 - GPS not taken in charge after the update of the WLAN driver

  Hi all

  I have a Tecra M10 with brod f3507g mobile modem. After Wireless manager driver update (suggested by TEMPRO) gps utility is not working: the error msg is "gps not supported!

  Of course before the driver update gps worked fine.

  Anybody experinced same problem?
  What can I do to fix this?

  Thank you

  Hi ouebgi,

  Have you ever tried to restore the old WLAN driver in Device Manager? There are a restore function for the previous version of the driver and you should try it!