The team of NIC failover problem

Similar Questions

• The NIC failover does not work in LBT mode

  Dear community,
  

  
  

  We met a strange behavior in our network environment while testing our new Cisco 4500 switches x 10g. If you have a TCP Session (example JJ | netcat) data transfer between two virtual machines on different host esx failover does not work on the VM receiver if a physical connection fails.

  The test configuration is as follows:

  |    | - 4 - switch 1 vmnic - vmnic 4-|    |

  VM1 | ESX1 |                  | VSS |                    | ESX2 |-VM2

  |    | - 5 - switch 2 vmnic - vmnic 5-|    |

  More details:

  • The switches are configured as a cluster VSS. New version of the software
  • ESX1/2 are running the latest version 5.5
  • The two vmnic is active on a DV-switch in LBT mode
  • Exchanges are configured with "Port based on the physical NIC load."
  • VM1 and VM2 are invited linux, NICS are vmxnet3

  Steps to reproduce:

  1. Beginning listening mode on VM2 (netcat-l Pei 12345 |) JJ = / dev/null)
  2. Start the transfer on VM1 (dd if = / dev/zero bs = 1 M | netcat VM2 12345)
  3. Check which link is used (in my example vmnic5 on ESX2)
  4. Unplug the ESX2 vmnic5

  What you observe:

  • DD-traffic dies immediately
  • If you kill the dd on machines (it does not end by itself) and start all over again, it works immediately
  • If you ping VM1 VM2 or another system, it works
  • If you plugged vmnic5 again once the virtual machine is switched to new vmnic5-> if you didn't kill dd will continue

  Now to test the reverse:

  1. Beginning listening mode on VM2 (netcat-l Pei 12345 |) JJ = / dev/null)
  2. Start the transfer on VM1 (dd if = / dev/zero bs = 1 M | netcat VM2 12345)
  3. Check which link is used (in my example vmnic4 on ESX1)
  4. Disconnect vmnic1 ESX1

  What you observe:

  • Failover works like a charm
  • Failback works like a charm

  Conclusion:

  • Only the virtual machine at the front desk has a problem
  • Only an already established TCP session behaves badly, work of new sessions very well (as does ping, no losses)
  • If you use LACP place LBT on uplink the problem disappeared
  • Same problem if you connect two links to Switch1
  • Same problem if you use a physical box with linux and LACP as system
  • I did the same test with two c3750x (no cluster VSS) and has not encountered the problem

  Any ideas? It's really a good one.

  Thank you!

  Sascha

  
  

  
  

  Update:

  To make it clear, it doesn't have the transmission of UDP.

  Post edited by: sewert1

  I did some further testing and also involved cisco. There is no problem with the switches and network in general.

  Turns out he works with Windows clients, but it does not work with Linux. But it works with Linux with adapters e1000 and e1000e but not with vmxnet3.

  So I did some tests and learned that the vmxnet3 kernel module must be at least version 1.3. Version 1.1 (SLES 11 default) or 1.2 (default SLES12) does not work.

  (./vmware-install.pl--clobber-noyau-modules = vmxnet3)

• Billing problem - removed company CC for the teams. How can I join the program?

  I just got an email from Adobe customer support stating that my business teams as withdrawn from CC. As far as I can tell the problem is due to the expiry of credit card that prevented the charges from 2016. I tried to change the business account information to insert the number of the renewed card, but the company has apparently been removed from CC for the teams. I can I join the program?

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• Where can I get support for a problem with a member of my team of cloud that receives the message that there no access more even if he is invited to the team?

  Where can I get support for a problem with a member of my team of cloud that receives the message that there no access more even if he is invited to the team?

  Please try to delete this user and try to reassign the seat for him. You can try to contact customer service for assistance. Please check the manage your cloud creative teams membership

• Hi, I have adobe CC for teams, a member of the team has problems, opening indesign, asked for a serial number, ive checked on our admin account and it is one our our registrants 'members '. I was not the person who created this original so I'm a little

  Hi, I have adobe CC for teams, a member of the team has problems, opening indesign, asked for a serial number, ive checked on our admin account and it is one our our registrants 'members '. I was not the person who created this original so I'm a little lost, I can't seem to find the serial numbers on my account and it seems like we don't have the qualified products? can you help me?

  Hello

  We checked the details of your team, all seats are assigned correctly.

  Now, there are a few details that we need in a private Message so that I can help you properly.

  Name of the user:

  User email:

  In the meantime, try it out below mentioned links.

  • Creative Cloud applications ask for serial number
  • Log, activation, or connection errors. CS5.5 and later, Acrobat DC

  [Note: the details we need is critical, make sure you send by private Message only.]

  Thank you

  Atul Saini

• Virt Center 2.5 shows no nic failover status

  Hello

  We bring a new ESX3.5 U3 DR/HA with Sun X 2200 cluster as nodes and experiencing several network problems.

  When testing failover nic that the Virtual Center displays correctly that nic is not available but does not show standby nic is active even if the old standby nic seems to be an OK traffic. Has anyone else seen elsewhere?

  Thank you

  Tom D

  Welcome to the forums,

  This is a known issue, only way to see what is happening is via esxtop, you would see the mb of the jump from the first to the second network adapter.

  Duncan

  Blogs: http://www.yellow-bricks.com

  If you find this information useful, please give points to "correct" or "useful".

• The upgrade card NIC to onboard LAN, Windows 7

  Hello everyone. Have a basic question for the upgrade of the Ethernet card or the card NETWORK on my Compaq Presario under W7 Home Premium. Initially, this machine ran Vista. I installed a PCI 3Com NIC {3Com EtherLink 10/100 PCI TX NIC (3C905B-TX)}. Windows Update find the required driver. When this was done I disabled the on-board LAN, this automatically disabled the LAN Boot ROM edge It is advised to disable the onboard LAN or the computer will work without problems with the LAN on board and 3COM PCI card as both enabled. I would appreciate your comments.

  Thank you for your help,

  Oscar Mint

  Model #: CQ5110F

  Product #: NP185AA-ABA

  Serial No.: {removed privacy}

  Software Build #: 93NAv3PrA1

  Service ID #: 101-209

  PCBRAND: Presario

  System model

  Compaq-Presario, NP185AA-ABA CQ5110F
  System serial number: 4CE92313HX
  Case type: Desktop

  Processor a

  Main circuit b

  2.50 GHz AMD Athlon Dual Core 7550
  256 kilobytes main memory cache
  1024 kilobyte secondary memory cache
  memory tertiary cache 2048 KB
  64-bit ready
  Multi-core (2 total)
  Not hyper-thread

  Tip: PEGATRON CORPORATION NARRA5 5.00
  Serial number: MS1C95R63502542
  The bus clock: 200 MHz
  BIOS: Phoenix Technologies, LTD 5.38 20/03/2009

  oscarmint wrote:

  Hello everyone. Have a basic question for the upgrade of the Ethernet card or the card NETWORK on my Compaq Presario under W7 Home Premium. Initially, this machine ran Vista. I installed a PCI 3Com NIC {3Com EtherLink 10/100 PCI TX NIC (3C905B-TX)}. Windows Update find the required driver. When this was done I disabled the on-board LAN, this automatically disabled the LAN Boot ROM edge It is advised to disable the onboard LAN or the computer will work without problems with the LAN on board and 3COM PCI card as both enabled. I would appreciate your comments.

  Thank you for your help,

  Oscar Mint

  Model #: CQ5110F

  Product #: NP185AA-ABA

  Serial No.: {removed privacy}

  Software Build #: 93NAv3PrA1

  Service ID #: 101-209

  PCBRAND: Presario

  System model

  Compaq-Presario, NP185AA-ABA CQ5110F
  System serial number: 4CE92313HX
  Case type: Desktop

  Processor a

  Main circuit b

  2.50 GHz AMD Athlon Dual Core 7550
  256 kilobytes main memory cache
  1024 kilobyte secondary memory cache
  memory tertiary cache 2048 KB
  64-bit ready
  Multi-core (2 total)
  Not hyper-thread

  Tip: PEGATRON CORPORATION NARRA5 5.00
  Serial number: MS1C95R63502542
  The bus clock: 200 MHz
  BIOS: Phoenix Technologies, LTD 5.38 20/03/2009

• The team of the administration portal does not appear

  When I connect to the admin of the Team Portal, only the top line of most is displayed (the one with my account name, the menu symbol and the symbol of the research). Then the spinning boxes remain forever and nothing else happens. I followed the procedures to test connections and try opening the test links:

  • Adobe's Activation Server, Adobe Icons: (https://ims-na1.adobelogin.com/renga-idprovider/resources/img/logos.png): OK
  • Activation for CC Server: (Adobe Systems Inc. - Site not available )

  Is this a common problem or specific toour team or my account?

  I need re assign licenses and create packages.

  Best regards, Gerhard

  You can try with another browser? Or login to anonymous browsing and try to connect there?

  If this solves the problem, then deletes the cookies and cache in your browser.

• How to move from a composition of the team to an individual membership

  Hello

  I the composition of Adobe CC team, now, I try to spend individual membership. How to do this?

  After that I go to individual membership, how computers can I use with this membership account?

  Someone help please, thanks in advance.

  so

  You will probably have to cancel the composition of the team and sign up for an individual subscription.

  Contact support - for the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

  For an individual license, you can have the software on as many machines as you can find, but of these only two may be signed use, and these two alone can use the software to subscription at a time.

• More storage for the team needed!

  We have a team and now filled subscription our storage of 100 GB. We need more storage! Where? How?

  Furthermore, Adobe claims '100 GB by team member' - TOTALLY NOT TRUE, this simply means, that each Member of the team has access to 100 GB total storage space of cloud of the team. So THIS I call a misleading total or even marketing lie. VERY UPSET about this. It is also stupid enough, that means, no matter if the team consists of 2 and 10 members, the storage remains the same tiny 100 GB. As if the other members would create no more data.

  I wonder if you use it properly in this matter as 100 is available for everyone? You can always use another system like Dropbox for businesses such as storage is obviously costs more money, but solves your problems

• How can we share library preview among the members of the team?

  Hi, we have 3 Adobe CC licenses in our account that make up or "team".

  We have a designer Assistant using one of our 'accounts of the team' to perform a search on Adobe stock for a project.  It allows to save previews of the options of choice for a 'library' that he created.  The problem is that the responsible for the design, which uses an other accounts team is unable to see the library stock generated by the researcher.  Is there a way to share libraries overview between accounts, or otherwise by e-mail?

  Being able to easily share stock options for approval is an essential element of most stocks of the functions of research libraries.  I hope that Adobe has not neglected this need.

  Thanks for any help you can offer!

  Go to assets.adobe.com and sign in. You will see your libraries and options to share/collaborate.

  

  More information here: action Adobe Creative Cloud files, libraries, etc.

• SQLDeveloper4 git a bug in the team... Versions

  Use a new installation of SQL Developer Version 4.0.2.15 build on Win 7 Pro 64-bit 15.21.  I did not import the settings of SQL Developer 3.

  I successfully cloned a repo git GitHub following the instructions in this blog entry: http://galobalda.wordpress.com/2014/04/02/sql-developers-interface-for-git-cloning-a-github-repository/

  But the local git repo does not appear in the team... 'versions' when I followed the instructions in the follow-up to the blog entry: http://galobalda.wordpress.com/2014/04/09/sql-developers-interface-for-git-interacting-with-a-github-repository-part-1/

  I tried the suggested "get around" to open a file from the repo git local manually via the file... Open, but it has no effect.  The 'Git' in the 'Versions' window tree will not grow.

  

  

  I solved this problem by following these steps. I have not kgitnow if one of these steps were not necessary, that I just know the 'Git Versions"works after doing all the:

  1. Uninstall SQL Developer 3
  2. Uninstall SQL Developer 4
  3. Delete all the content of C:\Users\rdgjr\AppData\Roaming\sqldeveloper
  4. Remove all content from the developer C:\Users\rdgjr\AppData\Roaming\SQL
  5. Re-install SQL Developer 4 (Version 4.0.2.15 Build 15.21)
  6. Team... Git Clone... etc.
  7. Manually open the file in local repo Git via file... Open
  8. Team... Versions
  9. Expand the 'Git' icon as shown in the image below.

  

• CC Login - Trial is in place, but I have a subscription [the team]

  I have CC by labour (composition of the teams) and I'm trying to connect my laptop to work from home, but he says my trial is up, and he is not a partner subscription to my ID. What is going on? I signed in and back several times

  Hello

  Please perform following steps depending on your operating system to resolve this issue.

  Mac activation problem

  (1) close adobe every process in activity monitor (creative cloud, sync Core, CC library, services for the desktop application adobe, adobe office, broker CIB Adobe updater AAM service)

  2) navigate to the following locations and assign all permissions to the adobe folders to the current user. To navigate, click on go in the bar on then click goto... type/library/application support of / and then click OK.

  (3) to assign the authorization right click on adobe folder and click on Get info... A window will open. Then click on the lock symbol to allow editing. Then click on sign + to add your user name. Then change read only to read and write. Then click gear icon on the bottom and click on apply to the elements included and click ok... Go to the next step then.

  3) navigate to next support/adobe application and delete Slstore and slcache.

  4) go to ~/Library/application support/adobe/oobe and delete the opm.db

  (5) navigate to/etc and open hosts file. Check if it has entries from adobe. If any amount of the fine, if yes replace the hosts file with a new file hosts without adobe entries

  (6) launch cc app and it should work properly

  Activating windows problem

  (1) close adobe all processes in the Task Manager (Core sync services for the desktop application adobe, adobe office, broker CIB Adobe updater AAM service)

  2) navigate to the following locations and assign all permissions to the adobe folders to the current user.  (Right click on adobe folder select properties then click on the Security tab, click on edit and select current user, that you are connected to, select full control, click on apply and then ok)

  C: / / program data (to view hidden files to see this folder)

  C: / / program files 86 x files / common

  C: / / program files x 86.

  C: / / program files common files

  C: //program files.

  (3) rename SLstore to Slstore.old to the following location c: / / program data / Adobe /.

  (4) rename SLcache in Slcache.old in the location C:\Program Files (x 86) \Common Files\Adobe more

  4) navigate to c: / / Users/username/appdata/local/adobe/oobe and rename Opm.db to opm.old

  5) navigate to c: / / windows/system32/drivers/etc/and the hosts file opened in Notepad. IF you see an entry from Adobe it please replace this hosts file with a new hosts file that doesn't have any input from adobe. If there is no entry permit Adobe the hosts file, as it is.

  (6) run cc app and sign in.

• Cancellation of the annual subscription to the members of the team

  After spending the last 3 days, to try to remove the feature of auto-renew or cancel the composition of the team, I'm more upset. I tried several calls to your so-called "customer service" phone number. Each trial irritates me in a very polite person that "captures my information" and transfers my call to the one who is supposed to solve my problem. After being on hold for a total of 5 hours (!), I'm using this means of communication. Your function of so-called "cat" has not been available for 3 days in a row well that your website promises "(24/heures par jour 7 jours par semaine) access." I suggest you rename your "Customer Service" Department "Customer Aggrevation".

  I would appreciate it if someone can solve this problem for me. To be precise, I wish that the members of the team under my Adobe account "[email protected]" cancelled at the expiration date of 16 January 2016. Please let me know if you need more information.

  Other users in an open discussion can not help, only Adobe

  Cancel see answer #1 in https://forums.adobe.com/thread/2023066

  NOTE that the chat support is not really 24/7

• Adobe has said that it would renew contract individual $86,86. Now they have changed for the teams $151,72.

  Adobe sent me an email on 10/10/15 saying they would renew my contract for 2 individual subscriptions. Adobe changed this without my permission and charged me for 2 places in the team. How can I get this problem.

  Steven Paglierani

  Please contact our assistance service to resolve this problem:

  FAQ: How to contact Adobe for support?