the trigger for camera AVT Pike-based software
Hello
I'm using labview 8.5, as well as the acquisition of vision (IMAQ-dx, latest version) software, to control a cross beam motion detector and AVT pike camera using a high speed cable IEEE 1934 (800mbps) b.
I wish to have a trigger internal (software) control system and have no problem to get Boolean cross beam sensor signal or run indepedently of the camera (about 300 FPS).
The problem is the trigger. I have a problem with where to put the camera vi in the relation to the probe wiring diagram. In the image as an attachment, I have the sensor in a loop and the camera, in a nested loop. However, when I trigger the camera manually with a push button, the sensor stops running. And when I try to control it with the sensor instead of the push button, I can boot, but cannot stop the camera.
Basically, I just want to know if there is a method of internal trigger to control camera image recording.
Thank you for your time,
Veritas
Ah yes! just before I read your reply I tried... and it certainly helped.
Thank you!
Tags: NI Software
Similar Questions
-
How to write the trigger for update or delete multiple columns in a table?
Hello
I create one in the form of table of sample_emp. In that, every time I want to change of name, team_id, team_leader_id, supervisor_id, manager_id it must store the update-able and old values of those in the job_history table. When I write the trigger for which it shows "ORA-04082 new or the old value not table level triggers. Here is my emp_table. My table also similar job_history like this. Need your help.
Header 1 Header 2 Header 3 Header 4 Header 5 Heading 6 Heading 7 8 header Header 9 EMP_ID EMP_NAME DESIGNATION TEAM_ID TEAM_LEADER_ID EMPLOYEE MANAGER_ID HIRE_DATE RELIEVED_DATE --
Thank you.
Hi Joel,.
Venky_prs wrote:
Hello
I create one in the form of table of sample_emp. In that, every time I want to change of name, team_id, team_leader_id, supervisor_id, manager_id it must store the update-able and old values of those in the job_history table. When I write the trigger for which it shows "ORA-04082 new or the old value not table level triggers. Here is my emp_table. My table also similar job_history like this. Need your help.
Header 1 Header 2 Header 3 Header 4 Header 5 Heading 6 Heading 7 8 header Header 9 EMP_ID EMP_NAME DESIGNATION TEAM_ID TEAM_LEADER_ID EMPLOYEE MANAGER_ID HIRE_DATE RELIEVED_DATE --
Thank you.
You can try something like this given below to complete the historical table on update and delete.
create or replace TRIGGER "CLONE_EMP_UPDATE_DELETE" BEFORE DELETE OR UPDATE ON EMP FOR EACH ROW DECLARE PRAGMA autonomous_transaction; BEGIN INSERT INTO JOB_HISTORY("EMP_ID","EMP_NAME","DESIGNATION","TEAM_ID","TEAM_LEADER_ID","SUPERVISOR_ID","MANAGER_ID" ,"HIRE_DATE","RELIEVED_DATE") VALUES(:OLD.EMP_ID,:OLD.EMP_NAME,:OLD.DESIGNATION,:OLD.TEAM_ID,:OLD.TEAM_LEADER_ID,:OLD.SUPERVISOR_ID, :OLD.MANAGER_ID,:OLD.HIRE_DATE, :OLD.RELIEVED_DATE); COMMIT; END;
Hope this helps you,
Kind regards
Jitendra
-
where is the plug for camera raw, Photoshop CS5?
where is the plug for camera raw, Photoshop CS5?
I can't view file on my Photoshop CS5 nikonnef
updated ps cs5 for the latest compatible with it, cr http://www.adobe.com/downloads/updates/
If you need a later version, you must upgrade your ps or use the dng converter.
DNG converters:
-
The new update with the Patch for Camera Raw does not work. Code U44M1P34
Hello
I have a problem with the new CC update - including the patch for Camera Raw 8.7.1
Error code: U44M1P34
Photoshop CC (2014)
After Effects CC (2014)
Brisge CC
The log file shows 1 fatal error:
FATAL: Payload ' Photoshop Camera Raw 8_8.7_AdobeCameraRaw8.0All 8.0.0.22 with a number that follows.
I tried to uninstall reinstall. Did not work at all, because the same problem appears.
I have not installed in other folders. All other updates worked - but not this update. The problem seems to bee only caused by the Camera Raw update.
Are there other people with the same problem? Any ideas?
Thanks in advance and greetings,
Joerg
Hi Jeff,
It seems I found a dirty solution, but work for my problem on this site: Getting fatal exit Code 34 when installing an application
To change these 3 names of folders and reinstall my programs worked fine without error:
Adobe PCD-> Adobe PCDold
backup-> backupold
Caps-> capsold
Now, the programs are on the actual status with all the updates that are included and everythings looks fine.
-
How can I write the trigger for the global temporary Table
Hi Grus,
How can I write the trigger for the global temporary Table.
I created the TWG with trigger using the script below.
CREATE A GLOBAL_TEMP GLOBAL TEMPORARY TABLE
(
EMP_C_NAME VARCHAR2 (20 BYTE)
)
ON COMMIT PRESERVE ROWS;
CREATE OR REPLACE TRIGGER TRI_GLOBAL_TEMP
BEFORE DELETE, UPDATE OR INSERT
ON GLOBAL_TEMP
REFERRING AGAIN AS NINE OLD AND OLD
FOR EACH LINE
BEGIN
INSERT INTO VALUES EMPNAME (: OLD.) EMP_C_NAME);
END;
/
trigger was created successfully, but her would not insert EMPNAME Table...
Please guide if mistaken or not? If not wanting to give a correct syntax with example
Thanks in advance,
Arun M MBEGIN INSERT INTO EMPNAME VALUES (:OLD.EMP_C_NAME); END;
you are referencing old value in insert stmt. BEGIN INSERT INTO EMPNAME VALUES (:new.EMP_C_NAME); END;
then run your app, it works very well...
CREATE GLOBAL TEMPORARY TABLE GLOBAL_TEMP ( EMP_C_NAME VARCHAR2(20 BYTE) ) ON COMMIT PRESERVE ROWS; CREATE OR REPLACE TRIGGER TRI_GLOBAL_TEMP BEFORE DELETE OR UPDATE OR INSERT ON GLOBAL_TEMP REFERENCING NEW AS NEW OLD AS OLD FOR EACH ROW BEGIN dbms_output.put_line(:OLD.EMP_C_NAME||'yahoo'); INSERT INTO EMPNAME VALUES (:new.EMP_C_NAME); dbms_output.put_line(:OLD.EMP_C_NAME); END; / create table EMPNAME as select * from GLOBAL_TEMP where 1=2 insert into GLOBAL_TEMP values('fgfdgd'); commit; select * from GLOBAL_TEMP; select * from EMPNAME; output: 1 rows inserted commit succeeded. EMP_C_NAME -------------------- fgfdgd 1 rows selected EMP_C_NAME -------------------- fgfdgd 1 rows selected
He got Arun
Published by: OraclePLSQL on December 28, 2010 18:07
-
How to use the trigger for Hammer
Hello
I used a hammer and an accelerometer of pcb to do some tests of beam. I want to express signal for start of log data after I use the hammer hit something. Here is my configuration in express signal.
Trigger type: analog edge. Source of relaxation: the channel of the hammer
Slope: fall. Level: 0However, once he began to run, it says "logging was stopped because an error occurred with a step in the project. If this error is due to a device buffer overflow, you can improve performance by disabling updates to screen using the "view > views of Signal update during the race" menu item. You can also change the way in which the signals are recorded by changing the Logging Options in the tools > Options dialog box. Disabling "Prepare the log for display data" will greatly improve performance. "I've changed everything, but it didn't work.
Should I use other types of trigger?
Thank you
Ningyu
-
Need the driver for camera Sony DSC-H300
When I connect it using the USB cable supplied, the menu of the camera trying to connect for a few seconds, then invites me to go MTP/PTP and mass storage. Neither one works. Device Manager sees the camera and she appears in the "other devices" topic like DSC-H300. It appears also as DSC-H300 in Windows Explorer. When I try to solve problems, Windows says it doesn't have the driver for this device. Then he tries to get online, but he never finds. He suggested that the manufacturer. Sony support said that the driver of this camera is built into the (Windows) operating system. Tried initializing the camera... no change. Windows supports site recommends controls the Windows Compatibility Center "which lists thousands of devices", but the link just takes me back to a generic support page... no list of devices anywhere. He didn't have a CD that came with the camera (new in box). Also, I downloaded all the updates of Windows that I could. (I use auto update and I still, but I thought he couldn't quite). Yet nowhere else. It's ridiculous! Windows doesn't have the driver for my camera and knows not where, or even what is the name of the file. It is a brand new Sony camera. How can the driver for him be such a mystery?
Hi Ryan,
Thanks for posting your query on the Microsoft Community.
According to the description, I understand that you are unable to find the drivers for your camera.
This could be due to hardware conflicts.
I first suggest you to run the hardware and devices Troubleshooter and check if that helps.
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
I suggest to try the steps in the Microsoft Help Article below and check if that helps.
http://Windows.Microsoft.com/en-us/Windows7/what-to-do-when-a-device-isn ' t-installed-correctly
You can also check:
Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.
-
Cannot download the drivers for camera Vivitar
Title: forvivitar camera drivers
I get a blank page, try to download driver for camera vivitar?
Hello-What is the exact error message / complete that you receive all trying to download drivers?-Is the issue limited with the specific Web site or other sites as well?-What is the model of the camera Vivitar?-What is the browser installed on your computer? If Internet Explorer, which is the version installed?Method 1: If you use Internet Explorer to download the drivers, I suggest you to follow the steps from the link and check if it helps.Why a few blank pages or incorrectly displayed in Internet Explorer?
http://Windows.Microsoft.com/en-us/Windows7/webpages-look-incorrect-in-Internet-ExplorerMethod 2: Also I suggest you try to download the drivers for the product from the link below and check if it helps.If the problem persists, I suggest you to contact the support of Vivitar of the link and check out.Hope this information helps. -
Create the trigger for multiple users
I am trying to create a trigger for a DDL event which gives an error for 2 users when they try to create a database object or a table.
Here is my code. When ran it gives me the following error: "WARNING: trigger created with errors of complication."
Any idea would be appreciated.
Thank you!
CREATE OR REPLACE TRIGGER trigger_before_create_object
BEFORE YOU CREATE ON THE DATABASE
BEGIN
IF USER = USER OR "VPD_CLERK1" = "DBSEC_CLERK."
THEN
RAISE_APPLICATION_ERROR (' you do not have the privilege to create tables or other database objects.) Contact your administrator if you need the privilege. ") ;
END IF;
END;
Published by: mkmety on April 20, 2013 12:10Welcome to the forum!
Whenever you post provide your Oracle version 4-digit
>
I am trying to create a trigger for a DDL event which gives an error for 2 users when they try to create a database object or a table.Here is my code. When ran it gives me the following error: "WARNING: trigger created with errors of complication."
Any idea would be appreciated.
Thank you!
>
And to alert you to the need to view the errors you got. If you did you will see this:
>
PLS-00306: wrong number or types of arguments in the call to "RAISE_APPLICATION_ERROR.
>
Oracle cannot raise your exception if you:1. do not define an exception to throw
2. don't tell Oracle how exception to throwSee the section "Defining your own Error Messages (procedure RAISE_APPLICATION_ERROR)" in the doc of the PL/SQL language
http://docs.Oracle.com/CD/B28359_01/AppDev.111/b28370/errors.htm#i1871This article has examples that show how to raise your exceptions.
-
How to write the trigger for update of 2 tables
Hi all
I have 2 tables,
1.lv_data,
It contains the following fields,
2.leave_dataemp_name tot_days guru 18
It contains the following fields,
In the second table, if the data is inserted.emp_name From_date to_date no_of_days remaining_days guru 02/05/2012 03/05/2012 2
the no_of_days will be calculated automatically (from to_date - From_date) + 1,
Here, I need to write the trigger to update the remaining_days column,
First table for all tot_days emp_name is 18 days,
Thus, in the second table every time that the record is inserted.
the remaining_days must be calculated as follows,
remaining_days: = tot_days - no_of_days and this (calculated) value should be updated in the tot_days column in the first table (lv_data).
Example:
2.leave_dataemp_name tot_days guru 18
emp_name tot_daysemp_name From_date to_date no_of_days remaining_days guru 02/05/2012 03/05/2012 2 16 [/code Now the first table should be updated like,
Guru 16
So I need to update to 2 tables,
can someone help me to update these 2 tables through TRIGGER?
Thank you
Kind regards
gurujothi
Edited by: Gurujothi may 1, 2012 19:54It is generally considered bad practice to store the value even in 2 places. You are having the kind of problems that you are experiencing now. It is much easier to store in the main table and get the value from there where you need to show in your forms.
-
Call a procedure only once for the last place of the trigger FOR EACH ROW
Hello world
I wonder if someone could help me in the execution of the trigger. My use case what follows:
-a trigger after each INSERT or UPDATE operation;
-use FOR EACH ROW algorithm for relaxation;
-collect certain values inserted/updated fields as: new.uuid and store in a set defined on the layer of the package;
-only for the last inserted/updated line call a procedure from the global collection with the values collected as a parameter;
Is it possible to be implemented for the type of the LINE FOR EACH of the trigger? Fact one: new identifier or trigger itself have special attributes such as COUNTY, SIZE to set a size of data inserted or changed to conditional logic? Is there another solution to possible workaround for thoughtful use cases.
Thank you
AndreyHi, Andrey,
I suggest you use 2 triggers:
(1) A FOR EACH ROW trigger, as you described, to collect relevant data and store it in a temporary table overall or variable poackage. Whenever the trigger is activated, it will overwrite all the data from the previous row.
(2) AFTER ( NOT FOR EACH ROW) trigger that calls the procedure by using the saved data. -
For cameras Baumer vision acquisition software
I have the EXG50 Baumer GigE camera.
On their website I found that it is supported by
Vision acquisition software 8.5
This means that it is included in later versions with Vision acquisition as well.
Or should I only use this version for the camera?
Is the reason I ask: I have the Vision Aqusition worm 8.6 software.
It works with the camera in MAX, but there a number of controls on the camera and picture on it has gone from left to right. Please see image attached.
I had similar problem. Deactivation of the resolved song data. Thank you.
-
Difficulty in finding the notes for Windows 7 Tablet PC software
I searched for some solutions that would allow me to get notes and equations with my digital pen, that I could then my conversion of leisure writing text. What I found seems to be for XP and not 7. Any help would be greatly appreciated. I use a HP touchsmart tm2t if that helps in any way.
http://Office.Microsoft.com/en-us/help/HA102249621033.aspx - extremely interesting and useful, but still refers to XP.
(http://www.microsoft.com/downloads/details.aspx?familyid=9D346916-B526-487E-919D-0BCE568DEF39&displaylang=en)http://www.ZDNet.com/ - has been mentioned here, but has been unable to find anything. It was probably due to my poor search parameters.
http://www.TabletPc2.com/software.htm - ended by leading me to Inkseine, which unfortunately is still in phase beta (http://research.microsoft.com/en-us/um/redmond/projects/inkseine/index.html)
Hello
You can use Microsoft OneNote 2007 with Windows 7 to write notes. OneNote offers a free-form canvas where you can type, write or draw notes in the form of text,
graphics and images anywhere where and how you want.Check this link for more information:
http://Office.Microsoft.com/en-us/OneNote/HA100325701033.aspx
Additional information:
http://www.Microsoft.com/Windows/products/winfamily/mobility/articles/OneNote.mspx
Kind regards
Amal-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Multiple camera monitor; Why the preview for cameras 2 and 3 are empty?
In the image above, my video V1 nested, multicam-activated the track is three videos.
On the left side of the program monitor, you can see a picture of MC1 (by behind and above the shoulder). You can see a yellow box drawn around what should be the image of MC2, but he is black. However, you can see that the image of MC2 on the right, in multiple camera monitor Preview. The same thing happens when I press '3' to switch to the camera 3. a yellow square is drawn around the black box where the image of the camera 3 should be, and the appropriate image appears on the right, in multiple camera Preview Monitor. But no matter what I do, the small rectangles on the left are always black and MC2 MC3.
When I right click on the video track and select multi-cam, activate menu item has a check mark next to it, the Flatten element does not work and camera 1, camera 2 and 3 camera are available.
Why can't I see the video of MC2, MC3?
MC2, MC3 were blackened in the Multicam monitor window as these tracks were disabled in the nested sequence. I had clicked on the eyeball "To toggle track output" for the two missing pieces while modifying the nested sequence. Once I clicked on the eyeballs again to reactivate the video, MC2, MC3 appeared as scheduled in the Multicam monitor window.
-
Cannot find the zoom for camera function
Is there a zoom of the camera feature or is updated with auto focus, the only option?
Autofocus focuses on image, not zoom. To zoom, press once on the screen and the zoom controls will be visible on the bottom in the Center, same you would see on a Web page, just click on the zoom in / zoom button back.
Maybe you are looking for
-
Equium A100 - screen turns off when I open the lid completely
I recently had a problem with my Equium A100, as when I open the lid fully, the screen turns off. However, when the half open, the screen is completely visible. I have attempted to open the screen and can not see loose cables to my knowledge. Any hel
-
try to put pictures from my computer to the iphone 3 G
I have an iphone 3G and I am trying to put pictures from my computer to the phone, does anyone know how to do this?
-
TomTom not recognized by Windows XP 2005
I try to connect my last 2005 Tomtom tomtom home via USB, but I get a message from screem - designed connected to USB has malfunctioned. TomTom home asking me to plug the 2005 even when it is already connected to the USB port. My Tomtom plus connect
-
Stuck on "the porgress firmware update"
My son tried to add a few new songs, but for some reason any that it got stuck on "a refresh database" no matter what we tried, I couldn't get out of this. Then we tried the update of the firmware auto it wouldn't recognize the drive because he was i