Call a procedure only once for the last place of the trigger FOR EACH ROW

Similar Questions

• USB serial adapter works once for each reboot...

  I have a serial adapter USB to connect to the CONSOLE of the switch/router port and I use 'screen' inside the Terminal to connect. Recently, I found that the "screen /dev/cu.usbserial 9600" works only once for each restart of the system. Steps to reproduce:

  1. the output of "ls/dev / * usb *" shows the right device.

  2. connect to the console of the machine with 'screen /dev/cu.usbserial 9600 '.

  3. press on "Ctrl + A, Ctrl + K" to exit the screen

  4. (optional) disconnect/reconnect the usb to adapter series laptop OR disconnect/reconnect the cable to the device console target.

  5. the output of "ls/dev / * usb *" shows again the device.

  6. try to connect to the console with "screen /dev/cu.usbserial 9600", the process of the screen will hang. Once what is happening, the screen process cannot be killed by 'sudo kill-9' and only be solved by turning off the power full. BTW, the laptop will hang also when the start/stop, until I continue to press on the button / stop...

  7. When hanging them screen, the output of "ls/dev / * usb *" would show nothing.

  Once the notebook starts up again, I can connect with the same command screen and the same scenario for step 2-3 above...

  I have Mac OS 10.11.3 and adapter Micro Innovations brand (prolific chip). I downloaded and installed/re-installed driver from the prolific site and no difference...

  Any idea?

  Still questions... help!

• PLEADING... I NEED help with the boxes, one for each row in table.

  I have a tabular presentation I want to use to process once that will process once for each line that has had its check box selected. I worked on it... It seems... forever. I almost gave up. More than once I thought I had it all to find that I have no work.
  
  It seems always executed once for each row in the set of lines in the displayed table and I care about her contract so that the lines checked.
  
  Here is my select statement...
  Select
  APEX_ITEM. CHECKBOX (2, ISSUE_KEY, DECODE (issue_closed, 'Yes', 'CLOSED', 'No', 'DISABLED', null)) CHECK_KEY;
  TO_CHAR (ISSUE_DATE, ' ' DD-MON-YYYY HH24:MM:SS) FAILURE_DATE,.
  ISSUE_COMMENTS
  QUESTIONS
  
  
  I have a submit button that runs the following process
  DECLARE
  v_org_comments varchar2 (1024): = ";
  BEGIN
  BECAUSE me in 1... APEX_APPLICATION. G_F02. COUNTING LOOP
  SELECT ISSUE_COMMENTS
  IN v_org_comments
  QUESTIONS
  WHERE ISSUE_KEY = APEX_Application.g_f02 (i);
  
  UPDATE PROBLEMS
  SET
  ISSUE_COMMENTS = v_org_comments | » ' || : P4_X_ODF_NOTES,.
  ISSUE_CLOSED = "Yes"
  where ISSUE_KEY = APEX_Application.g_f02 (i);
  COMMIT;
  END LOOP;
  END;

  Hello

  I had the same problem. It seems that if you pass your columns to the columns in standard report it will fire for the checked columns. But if you proceed towards editable fields each line is treated as checked.
  So if you use line selector instead of manually creating check boxes and have a hidden primary key
  field, you can then use something like

  BECAUSE me IN 1.APEX_APPLICATION. G_F01. COUNTING LOOP
  UPDATE

  
  SET
  WHERE =
  APEX_APPLICATION. G_F02 (APEX_APPLICATION. G_F01 (i));
  END LOOP;

• When I use the library function node call in real time, is loaded only once for all or load the DLL whenever it is called?

  When I use the library function node call in real time, is loaded only once for all or load the DLL every time when it is called?

  I have a critical application in real time, in which I use a piece of DLL function developed in C++.  It is ok?  Make sure any senior developer?

  Thank you in advance.

  The user interface thread is the thread that is used to update the user interface. It's slow. And it's supposed to be that way because humans are slow.

  The call library function node can be configured as this thread to use in the configuration for it dialog box. Please visit the LabVIEW documentation on how to do this.

• call a stored procedure for each row in the transitional attribute and display the data in the form of af: table. The other rows are based on the entities

  Hi Experts,

  JDeveloper 12.1.3.0.0

  I have a VO based on entity object. With a column of the VO is transient attribute (I created).

  I need to call a stored procedure for each row in the transitional attribute and display the data in the form of af: table. As well as other attributes.

  So can anyone suggest how can I achieve this?

  Thank you

  AR

  I think that you need a stored function (which returns the value) in this case, is not?

  Take a look at:

  https://docs.Oracle.com/CD/B31017_01/Web.1013/b25947/bcadvgen005.htm

  and search for:

  Invoking stored function with only Arguments in

  call your function in the Get attribute and return value accessor...

• Is it possible to find the two sentences into one pdf file? For example, I know the words 'Here' and 'the answer' occur more than once in my document, but only once on the same page. I'm looking for this page.

  Is it possible to find the two sentences into one pdf file? For example, I know the words 'Here' and 'the answer' occur more than once in my document, but only once on the same page. I'm looking for this page.

  I tried to do this by using the search but it will find only them, if they occur as a long chain, that is to say "Here's the answer" rather than how they occur in the document it is to say "Here 's" a bunch of information that leads you to 'the answer'. The search feature so standard did not help.

  Then I tried to do this by using the tool to delete (obviously not the application of writing!) because it allows me to search for multiple words or phrases, however it is not highlight what page both are found. I tried to turn on the preference to enable deletions of comments and even if it meant that I could then go through all the comments, it's still not faster than my document is more than 1,000 pages, which meant there were too many total comments for me to be able to easily identify which page had both.

  Any ideas?

  There is no built-in way to search for two strings and limited to show only the results that appear on the same page.

  It can be done by using a custom script, however.

• Topics appear twice in the list of topics, however, each does exist only once in the project.

  Some subjects appear twice in the list of topics, but each exists only once in the project files. What are the causes for this and what can do to prevent it? I am using HR 11.0.4.291. I deleted the CPD file.

  Here is an example:

  

  Change in all files in a folder specific to say the first element. There may be two files in the same folder that Windows does not allow that. My guess is that the duplicates are in different folders and change the folder will help you find the original and the duplicate.

  Also open both the list of topics. Should be the red squares in it? If Yes, you have sort of a release in the source.

  Post back with what you find.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• How to map the entered value of attribute column to another attribute in the table for each row.

  Hi Experts ADF,

  JDev 12 c.

  I create a button and a table below. If the user clicks on the button create, I invoke CreateInsert. The new line now appears as an editable fields.

  So I suppose I have a column that is displayed in editable mode. If the user enters values in that. Has another column B whose value is not displayed in the UI must have the same value as the column.

  This occurs for each row added. During the click on save if user entered 2 in column A, then the value in column B must be same 2.

  Thank you

  Roy

  There is more than one way, for example:

  Generate ViewRowImpl Java class (with generate audited accessors) you will get for an attribute setter.

  Change the Set accessor to set the attribute B (IE, calling setAttribute ("B", value)) after setting a value

  OR, write valueChangeListener for inputText representative and set the B attribute to the same value

• the analysis of a word table of ms with different numbers of columns for each row

  I'm reading in a MS Word table that contains 20 lines, each with a different number of columns.  I have to iterate over each line then I iterate on each column of the row and read his text.  I don't know a way to find out how to stop an iteration on the columns.  Is a property or a method which tells you the number of columns in a specific line for a table in MS Word?

  ID says:

  I'm reading in a MS Word table that contains 20 lines, each with a different number of columns.  I have to iterate over each line then I iterate on each column of the row and read his text.  I don't know a way to find out how to stop an iteration on the columns.  Is a property or a method which tells you the number of columns in a specific line for a table in MS Word?

  For each row, use the count property of cells. Since there a number of subject lines is the number of columns.

  Ben64

• Creation of 5 rows in table B for each row in the table has

  create table A
  (col1 number,
  col2 varchar2(20)
  )
  /
   
  create table B
  (col1 number,
  col2 varchar2(20)
  )
  /
  
  insert into A values (1,'Jane');
  insert into A values (2,'Kate');
  insert into A values (3,'Stomp');
  
  
  SQL> select * from a;
  
        COL1 COL2
  ---------- -----------------
           1 Jane
           2 Kate
           3 Stomp

  For each row in the table, I want 5 rows to be created in the table b. table B should look like

      COL1   COL2
  ---------- -----------------
           1 Jane
           2 Jane
           3 Jane
           4 Jane
           5 Jane
           6 Kate
           7 Kate
           8 Kate
           9 Kate
           10 Kate
           11 Stomp
           12 Stomp
           13 Stomp
           14 Stomp
           15 Stomp

  How can I do this?

  Hello

  A way

  insert into b
  select rownum*5  , col2 from a
  union all
  select rownum*5+1, col2 from a
  union all
  select rownum*5+2, col2 from a
  union all
  select rownum*5+3, col2 from a
  union all
  select rownum*5+4, col2 from a
  

  Concerning
  Anurag

• I want to create the link (to each row) in my detail page < < < < < in order, the articulation between (detail page 1 < < < detail 2).

  I want to create the link (to each row) in my detail page < < < < < in order, the articulation between (detail page 1 < < < detail 2).

  Hello

  f9afc1ea-f5a4-4400-A33A-187e03664d82 wrote:

  I want to create the link (to each row) in my detail page< in="" order="" to="" linking="" between="" (detail="" page="" 1="">< detail="">

  Change your column on which you want to create the link

  go to declare attributes-> column change-> under the column link

  1. Select a text link (you have option available under the link text select one of these option)

  2 target - > application Page

  3 page-> page not on which you want to redirect

  If you want to pass a value then

  Item1-> select an item in the page detail2

  values-> that you want to move the page pos.1

  see this screen shot for reference

  

  Hope this helps you,

  Kind regards

  Jitendra

• How can I create sequential shooting (1 for each 'row') numbers in a script in multiple column?

  How can I create sequential shooting (1 for each 'row') numbers in a script in multiple column?

  Sorry, but for now there no such function to put sequential numbers in the column number drawn.

• Calling stored procedures with parameters with the database connectivity Toolkit

  Hi all

  I'm new to the forum and struggling to find a solution to a particular problem I have in this respect, using the LabVIEW Database Connectivity Toolkit on a project, I am currently working on my work.  I have a database in which I tables and stored procedures with parameters.  Some of these stored procedures have input, output and return parameters.

  I tried to follow this example, but to no avail: http://digital.ni.com/public.nsf/allkb/07FD130746083E0686257300006326C4?OpenDocument

  Such a stored procedure I am working on the implementation is named "dbo.getAllowablePNs", running "SELECT * from DeviceType" (DeviceType is the table).  In this case, it requires no input parameter, it has an output parameter that generates the table [cluster] and has a return parameter that returns an integer value (status code for execution) to show if an error occurred.  The DeviceType table has 3 columns; ID (PK, int not null), PN (nvarchar ((15), null) and NumMACAddresses (int, null).)  I have surpassed many examples and I talk to the support OR try to implement this and similar procedures stored in LabVIEW but have not been successful.  I am able to connect to the database with the VI of open connection without error, but spin in some confusion as a result of this step.  I then try to use the VI of parameter query create to call the stored procedure and set the parameters.  I guess I would then use the Set parameter value for each parameter that is connected to the entry of parameters on the previous query with parameters VI VI?  I am also having some confusion during and after these steps as well.  I would greatly appreciate advice or suggestions that anyone could have in this situation because I am not a SQL expert.  Also, I would be happy to provide more information that might be useful.

  Kind regards

  Jon

  Here's what I use to do this.  I think I had to change him create parameterized query VI for him to work.  There is a post on the forum about this somewhere.

  

• Asking only once and the storage of information.

  Hello

  I would like to start for the FIRST time to have my application to request a phone store so that number number so when you are prompted for the end user can choose to receive a text on my Web site with out having to put in the number evertime.

  From what I've read here you can't just of the information with the user information.

  I can do AJAX and the popup box.  But the storage and the first part only once I'm a little to the 'green' on.

  Thank you

  Probably the simplest way I can think to do is through cookies.  You can set a cookie that stores the phone number and another that tells you if you have requested the digit preceding.  Finally, whenever you launch the app, you check the second cookie, if it has not set will prompt you for the phone number, otherwise do not ask for it.

  An introduction to the use of cookies with JS can be found here - http://www.w3schools.com/JS/js_cookies.asp

• Only once at the start of the first image to sound

  I imported the sounds of my animation and visuals must be synchronized with the audio, they depend on each other. But whenever I need to replay to hear the audio, it only works if I start from the beginning. He is very good at the beginning, but I proceed with my movie, the more frustrating it gets. If I play in the Middle, the audio will be silent.

  I tried to find answers to this, I don't know if there is a simple option for this, or if this is a bug. Help, please!

  Sound can have different type of synchronization setting in the properties panel. To do what you want, you would normally define the flow, but that only works for AS3 documents, it is not available in HTML5 Canvas.

  If you are just an animation that will end in video, or just for the reading of office, use AS3 FLAS. If you do an animation for HTML5 Canvas, start with an AS3 FLA, do everything which animation to adapt the sound stream and then convert the FLA in HTML5 Canvas.