The turn of my computer in the start menu has changed to Shut Down

Similar Questions

• The start menu has disappeared from the computer... With explore 7 and the upper part is not constant either. No miracle solution?

  The start menu can only be achieved by using ctrl and esc.  Sometimes, it would be great if they kept things simple.

  Hello coinfused,

  Thank you for visiting the Microsoft answers community.

  The taskbar is visible? Usually when you ctrl + esc and get the start menu, it means that the hide feature is automatically enabled for the taskbar.

  ·         Move your mouse to the bottom of the screen, the taskbar expected popup.

  ·         Right-click on the taskbar visible now and left click on properties.

  ·         Search for auto-hide the taskbar, uncheck the box in the box and click ok.

  Hope this helps

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Shortcuts in the desktop or the Start Menu has not created

  Hello

  We use vWorkspace 7.2. and AppPortal for access applications on 2003 TS in transparent window mode. All published applications are accessible from the thick client or VDI computers. When I assign an application to vWorkspace folder, the icon appears correctly in AppPortal. Problem starts when I attribute the same request to "Remote Desktop files", in this case no entries are created, nor to the desktop or the Start Menu or any other option. When I change AppPortal to work in integrated desktop mode all entries are properly created.

  There are already a ticket about this Quest (CaseID:887952) support. After many hours of phone calls from the Technical Department explained what I need is available only when all of the TS Office are published. I find it hard to believe that I did the same thing easily with other 3rd party broker connection software. What is your experience, do you have "Remote Desktop Folder" work without providing complete desktop TS?

  Best regards

  Adrian Tonina

  Adrian,

  AppPortal is designed to run on your client computer of the end user and is able to show the shortcuts in the user interface or on the desktop of the client operating in desktop integrate mode (DI).  When running in mode of DI, only applications that are designated for the integration of office will have shortcuts created on the client for desktop/menu start.  You can specify in the properties of a managed application, Desktop Integration step.  Note that only applications that are assigned to the Connector vWorkspace records will be created through AppPortal.

  Applications that are assigned to the Standard and customized remote office records are created through our configuration of the Shell (pnshell) module, and their shortcuts are created on the remote (TS or VDI) desktop computers.  If configured properly, you will see them on the entire desktop of the remote session.

  -Adam

• Unable to complete the start-up and it auto shuts down

  all web services I use (chrome, safari, and Fox) could not load sites.  I decided to restart, but during the start of it, the grey sovereign would move but itll stop. When this happens, the system automatically stops. I tried everything, but it still does nothing.   someone has the same problem?

  I've tried everything

  Care to share?

  Please give details of ALL you have done so far in the way of troubleshooting?  Need this info to avoid scenarios of summer does .

  iOS 9.0.2

  iOS is for mobile devices.  Care to share what OS you use?

  

• My says Windows Vista update, phase 3/3, do not turn your computer, that hard thing 24 hours, I can't start menu, I can't go down the screen of Windows Vista update

  I have a laptop, ran a software antivirus and then he says to Windows Vista is to install the updates, phase 1 of 3, then 2/3, then he is stuck on the phase 3/3 for 24 hours, if I turn the computer market and unplug it and try to turn back still evokes the same screen. very frustrated.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  And make sure you only set the CD/DVD drive to be 1st in the boot order to boot from the drive that you have just made

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• Some icons on the start menu are missing after a remote desktop session in Windows 7

  I use Win7 Pro SP1 and whenever I come back to my office after finishing a session desktop connection to my computer remotely, I noticed several of the icons in the all programs from the Start Menu section changed to default page icons. If I try to open any programs that are pinned to the start itself, it will indicate that the program cannot be found. Notepad and Calculator in particular to keep more victims of this problem.

  I also noticed that the audio controller is disabled until I restart.

  I found a batch file that will rebuild the icon cache, but this very annoying to have to keep doing it because I have to remote into my computer almost every morning for the daily scrum meetings we hold in a conference room.

  Does anyone know a permanent fix?

  Hi Tim,.

  What is your length % PATH %. See if this applies in your case.

  Windows 7 - after the remote computer desktop target some shortcuts do not work, may be losing %windir%\System32 - Super user: http://superuser.com/questions/867950/after-remote-desktop-target-pc-some-shortcuts-don ' t work-possibly-loses-Amelia

• Why the icons disappear from the Start Menu?

  The Start Menu has two regions: a region for applications whose icons are pinned to the Start Menu and two region, for applications whose icons are not pinnend to the start menu... the positions of icons these vary, depending on the frequency of use.

  Why in the region shortcut icons do not disappear into the Start Menu?
  They are not being "jostled" more low ranking... they stop just appear.
  Open an application can hand its icon at two area of the Start Menu,
  but then after a few days (maybe earlier), for example, the icon is missing.

  Thank you
  DaleB

  You already have the answer yourself.

  "The two region" can only hold x number of icons... Let's say 7.
  If you later open a 8th program, among the list of 7 will be "hit.
  I opened Windows DVD Maker. Later, I opened MS Excel. Windows DVD is moved from the list.

  

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• When I turn on my computer until the start menu is ready before I click on internet, it really takes a lot of time

  When I turn on my computer until the start menu is ready before I click on internet, it really takes a lot of time. Why?

  Hello

  Did you do last changes before the show?

  I would like the season you follow the steps in the link and check if that helps.

  Method 1: Perform a boot clean and chcek if it helps.

  How to configure Windows XP to start in a "clean boot" State

  Note: Once the diagnosis has been made, make sure you try the step to configure Windows to use a Normal startup state in the article in order to reset the computer as usual.
   
  Method 2: You can also check out the link and check if it helps.
  Advanced Troubleshooting for General startup problems in Windows XP

• Unable to stop the computer in the start menu.

  Original title: stop problems

  I cannot shut down my computer (laptop) in the start menu. The option is there, but when I click it the computer does not turn off.

  Click on this link: http://www.scanwith.com/Autoruns_download.htm download & install it. (It is a secure reliable software). You can keep it for future use if you choose.
  1. after the download is complete, select autoruns & right click on it
  2. click on "extract here".
  3. on the extracted files, click "autoruns" application select it & right click and click"Openorrun"& click OK or Yes if the process of ptompted by an administrator to complete the installation.
  4. what which is complete, Open or run "autoruns".
  5. in the opened window, click 'all'.
  6. on all programs that says 'file not found' select each & every one of them, click on one at a time...
  7 right-click & click delete & ok

  He helped?

• Computer laptop Windows 7 can see other wired PC via a wireless connection by specifying the box "search programs and files" drive letter in the start menu, but not in the network screen

  My laptop with Windows 7 (64-bit) can not see the other desktop PC running Windows XP via a wireless connection, except if it is plugged into my laptop so only I can see them on the network.
  I checked all the working groups to ensure that all are the same.

  However, when my laptop into Wi - Fi, I could see the other wired desktop PC by specifying the network path in "search programs and files" to the start menu in the Windows 7 laptop, I was able to add network folder by specifying the drive letter for the connection and file I want to connect via a right click on the network to connect a network drive...

  Then, finally I can access any other desktop pc wired to shared folder via the Wi - Fi by this method.

  But I still don't see them on eventhrough network I can access by this method. Please help me solve this problem.

  Hi Hkway,

  • You are able to see the Windows 7 machine Windows XP computer when connected through wireless and if it is accessible through network?

  First of all, check if the NetBIOS protocol is installed on your Windows XP computer. To install the NetBIOS Protocol, follow these steps:

  1. click on start, click on Control Panel and then double-click network connections.

  2. right click on the card that you want to add NetBEUI to and then click Properties.

  3. on the general tab, click on install.

  4. click on Protocol and then click Add.

  5. Click to select NetBIOS protocol in the list, and then click OK.

  6. restart your computer.

  Also make sure that NetBIOS over TCP/IP is enabled in the Windows XP computer. To do this, follow these steps.

  Turn on NetBIOS over TCP/IP

  1. click onStart, click on Control Paneland then click on network connections and Internet.

  2. click onnetwork connections.

  3. right click onLocal area connectionand then click Properties.

  4. click onInternet Protocol (TCP/IP)and then click Properties.

  5. click on the tabgeneral and then click Advanced.

  6. click on theWINS tab.

  7. underNetBIOS setting, click Enable NetBIOS over TCP/IP, and then clickOK twice.

  8. click onclose to close the local area network connection properties dialog box.

  9. close the network connections window.

   

  After following the above steps, check if you can access the computer Windows XP of Windows 7 computer using the wireless connection.

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Cannot restore my laptop-"Repair my computer" not appearing is not in the start menu

  Once or twice in the past had to get my phone and it was an easy process thanks to the construction recovery option (computer repair) in the start menu (when you press F8 on the Toshiba screen), but now when I press F8 during the Toshiba screen and go to the boot options, there is no option to fix my computer. Fix my computer is usually the first option, but the first option is now "Start Windows in safe mode". Fix my computer disappeared! :(

  I think that the cause of my problem is that I started my laptop using my friend's windows startup disk when my computer would not start a month back. In fact, he got my laptop going again, but after starting my laptop, he told me that there is a problem with the start and he asked if I would like to repair and restart, I did. In addition, the windows startup disk, I used to start my laptop computer is a 64-bit version and my laptop has a 32-bit operating system. I don't know if that makes a difference.

  Could someone please help me by letting me know if there is anything I can do to get "Repair my computer" back. It is handy recover my computer when I want to just go back and get my laptop clocked in so it is better again.

  Short answer:
  There is nothing you can do about it except to include adjustments to plant again. I'm sorry. :(

• Where is my computer, it is not under the start menu

  Hello, I got an ebook for Christmas that required me to open my computer to install the software so that I can use it. There is no computer in the start menu and I do not know where to look for it or how to access it and someone can help me thank you Eliz

  Hello

  I suggest you to follow these steps and check if that helps:

  1. Right-click on the taskbar, click Properties.
  2. On the Start Menu tab, click Customize.
  3. On the Advanced tab, go to the section of menu items start and see if my computer is checked.
  4. If not, select it.
  5. If so, uncheck the box, then click ok and apply, follow the same procedure select it again.

  It will be useful.

• After you restore rundll32.exe, I restarted my computer all the icons on my desktop and all programs in the start menu disappeared

  Every thing seems to have returned to normal, but when I restarted my computer all the icons on my desktop and all programs in the start menu disappeared, and yet, all programs are always in: Control Panel > add/REMOVE programs.   I can still connect to the internet by going to-Start > my computer > view > go to the desktop. How to get back all the icons on my desktop. I tried a click right, but in vain. I also ran a scan complete antivirus. any help would be appreciated.

  Thank you Joel S. Before I could put your advice into practice a friend recommended a friend who advised me to do a system restore, which he said he would be happy to do it for me. So look like an easy option, I agreed. It seems to have solved the problem (fingers crossed), but now it seems that I need to format the hard drive. If you have any tips on formatting hard drive I'm all ears. Thank you Owen

• Can't see the network PC MAC computer, unless I have use RUN in the start menu and type in the IP address.

  Original title: MAC to PC NETWORKING.

  I added my Mac to my PC network workgroup.  I can see the PC from my Mac, but not my Mac to the PC network puts unless I have use RUN in the start menu and type in the IP address. I am running XP Pro SP3.

  Hi markymo777,

  I suggest you to check if you can see the MAC computer with the UNC path - \\computername\sharename. Later, check to see if the problem persists.

  Hope the helps of information.
  Please post back and we do know.

• Computer will not close in my user account in the start menu

  My computer does not stop in the start menu in my user account, but stops if I change username and then click on stop.  Same thing happens with Restart.  Among the things tried was to uninstall and reinstall Norton after using Norton Removal Tool.  I also ran a cold start.  So far, nothing has worked.

  My computer does not stop in the start menu in my user account, but stops if I change username and then click on stop.  Same thing happens with Restart.  Among the things tried was to uninstall and reinstall Norton after using Norton Removal Tool.  I also ran a cold start.  So far, nothing has worked.

  Hello
  Are you able to connect on the other say shutdown and account administrator correctly? From your post I understand you are facing problem only in your profile. Try to create a new profile and see if the problem persists. (See:http://support.microsoft.com/kb/279783)

  I hope this helps.