Acer 5755 G HDD led blinks constantly

Similar Questions

• My player HDD Led blinks is not on hp pavilion dv6-6c65sx

  I have hp pavilion dv6-6c65sx A7P80EA #A2N. My disk HARD drive Led flashes does not for me.

  Can you tell me how can I get it back?

  Yes there are wires connected on the HARD disk, but not to the light, if your computer can boot windows, then the disk is readable, the light is just separated from the HARD drive.

  As the light comes from the motherboard.

• WRTU54G-TM internet light blinks constantly

  I just got this modem used on eBay to set up a wireless system at my parents home.  Whenever I plug the ethernet cable from the modem cable (Brighthouse) directly to the router, he moaned not being able to find an internet connection.  I restored to factory default, but no matter what I change the internet contstantly flashes quickly.  The led 'link' to the cable modem blinking constantly as well, but it has no effect on the Internet when the router to jump.

  Thoughts?  I am at a total loss.

  Solved my problem can be found on the forums.  I had to change some configuration settings on the router that I am not used to doing.

  FYI everyone, it was found in the second post in the section below

  http://forums.linksysbycisco.com/Linksys/board/message?board.ID=VoIP_Routers&thread.ID=3905

• Portege Z930 - 14L - DC orange led blinks 8 times and green ECO light led

  Portege Z930 - 14L. I can't boot from the last power since.
  The domain controller in the orange Led blinks 8 times and eco green light led is lit.

  DC IN flashing ornage indicator indicates a problem with the power supply. Initially, you should try plug the adapter HAVE an another power outlet. If she does still not work, you should contact Toshiba ASP (authorized service provider)

  Electronic supply on the motherboard is probably the problem.

• ThinkPad E550: External monitor blinks constantly during the recharge of portable

  When I'm running my Thinkpad E550 and I connect it to any external monitor with a VGA cable, the external monitor blinks constantly as the external monitor can be used to do any significant work.

  However, when I remove the charger, the constant flashing stops and the external display could be used if the screen still flickers / flashes for about 4 seconds every 50 minutes or more.

  Unfortunately, using the laptop on battery power all the time is not healthy for the battery of the laptop but it is the choice that I have if I need to use an external monitor.

  I tried to use an adapter 2 components for connect the monitors but I still feel the flicker until I remove the charger.

  Does anyone have a solution? Thank you.

  
  

• Satellite A100-847 battery led blinks 11 times, absence of motherboard?

  Hello

  14 months (only 12 months warranty), I have a Satellite A100-847 was a laptop perfect, but 2 weeks ago the ac-adaptar falls down and since then that if I push the power button the battery orange led blinks 11 times with the same length, but nothing happens.

  ASP did not now what this flashing means but think I have a motherboard problem.
  Now I found on ebay a Satellite A100-153 and my question is, is this the same motherboard, because it's also 945 PM.
  (Sorry for my bad English)

  [Satellite A100-847: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/SUPPORTSECTION/discontinuedProductPage.do?PRODUCT_ID=120570&DISC _ MODEL = 1 & service = EU]

  [Satellite A100-153 | http://de.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/productPage.do?service=DE&PRODUCT_ID=112714&PRODUC T_ID = 112714 & toshibaShop = false]

  THX.

  It seems that two laptop computers support the same motherboard as the Satellite A100-847 and Satellite A100-153 belong to the same series of PSAA9E.
  This series uses the same drivers and the same BIOS so I think that the mobo must also be the same.

  PS; I think that it is a motherboard problem too. Such a code is displayed only if a hardware failure has been detected on the motherboard.

  Best regards

• The Phillips 170 monitor power indicator b blinks constantly.

  Original title: phillips 170 b power flashing light.

  My phillips 170 b monitor power blinks constantly its really annoying please help I tried to reset by removing power cablea and reinsert even using different power cable, but no change

  Hello Stephen,

  Did you do any hardware changes or software on your computer before this problem?

  You can connect the monitor to another computer and see if the problem still occurs.

  If the problem persists, I suggest you to contact Philips support for assistance:

  http://www.P4C.Philips.com/cgi-bin/dcbint/cpindex.pl?SLG=en&scy=us&CTN=17B2Y

  Hope the helps of information.

• Gel W520 and HDD Led always on

  Hi, I have a new i7-2820 W520, 8 GB Ram, NVidia 1000 M, SSD OCZ Vertex3.

  After some problems with AHCI and SSD controller now it works very well, with all the drivers installed properly, but sometimes (1 or 2 times a day) the system freezes and the hdd led remains always on (flicker). I can move the cursor of the mouse on the screen, but I can't do anything else and I have to restart the system (by pressing the button for 5 seconds)

  Any suggestion?

  Thank you

  Luca

  First of all, don't do anything when you get the gel and see if your W520 thaw on its own until after 5 minutes. You can then check this entire thread for the many "bugs", but attention to the #9 message.

  http://www.ocztechnologyforum.com/Forum/showthread.php?87349-new-OCZ-vertex-3-stalls/Page2

• replacement for the power button cable / stop, power LED and HDD LED

  Need to find cables to replace the header 9 pin on the switch / stop, power led and HDD LED indicator.  It is a PC HP Pavilion Media Center m8530f.

  Additional details - no one A High School HE thought that the switch was bad on this PC, so they tried to replace it, but ended up damaging the cables.  The real problem was a power supply dead, so I ordered a new, but now I need to fix this as the person IT damaged the power button, power LED and HARD drive cables.

  Here is a link to your m8530f on HP Part Surfer. I think the part you want is "power switch cable assembly (Black Canyon), part number 5070-2940. It looks like it is available, but you can always call HP and ask.

  Frank

• Hard drive constantly activity led blinking - new WIN7 Ultimate Dell PC

  I've been solving this problem and for weeks on my new WIN 7 64 Ultimate Dell XPS 8000 (I7 - 860 1 TB HD 8 GB of Ram).    Looking around for a found many recommendations and a couple of issues resolved, (more unresolved), but none of the recommendations has helped me.

  I had the feeling that it is perhaps a Dell-specific question, but I had no answer in the Dell forums.   I don't know if I call the Dell technical support, all I get is recommendation to return to the factory default.  No thanks!

  I disabled all the suspects, at least temporarily to see if it has an effect:

  Indexing of Windows & research
  Windows Firewall
  Windows Defender
  System restore
  Remote differential compression
  Windows Fax & Scan
  SuperFetch
  Sea port

  With all these off, flashing was much less busy, but there was still a steady pulse of the blink type.   I have since the Defender reactivated and restore the system.    (Even if they were to blame, it is almost a solution/workaround acceptable!)

  I studied the disk activity in PERFMON, and there is an occasional activity of nucleus and the recording of events.  I took a few shots of window I can post (if I can figure out how).   I also have a HijackThis log.

  Sometimes the PERFORMANCE of disk activity monitor window is empty but still the light continues to blink!  huh?

  I did not disable Hibernate (there was a suggestion somewhere he could play a role).  I use it regularly.   But I can try that too, you think it might help.

  I'm at my wits end and a bit overwhelmed by all the data in order to study and seek.  I hate diddling with the services and the registry, fearing to wet my head and creating a mess that I can't get.

  In addition, there is no additional security software and I haven't installed everything preinstalled trial crapola.

  Help!

  I'll post the hijack this log in the next post

  Updated to clarify: what I reported above is essentially on the out-of-the-box behavior... not or associated with CPU-bound application. The system was fairly clean with an installed extra software/hardware minimum.

  Hard drive blinks quckly because Microsoft made what is called something like Write Cache Flushing flushes written disc that maybe in this cache on the disk?  Simple.

  The reason is... If you have a power failure... you lose this memory data cache and/or corrupted something that may be important.   Also taking a hit on the drive's performance and life expectancy.  If some experts say.

  If you have a battery backup... or most laptops with a battery can... Turn it off!

  .. In Device Manager, the properties of the hard drive has usually a checkbox to activate cache of writing... and some will have another check box...  Disable Microsoft Write Cache Flushing.<  add="" a="" check="" to="" that="" guys box...now="" look="" at="" your="" non="" very="" often="" blinking="" hdd="" light... works=""  same="" with="" some="" of="" the="" dvd/cd="" drives, same="" controllers="">

• Light of HDD Ext - StorE Alu2 - blue flashing / blinking constantly

  Hello

  I have a store alu2 px1640m - 1 hl 0

  Suddenly, it works tonight. I can't feel/hear the disc and the blue light on the front flashes at 2 Hz about.

  Any ideas greatly appreciated.

  Jim

  Some news on the issue described? Always the same problem?

• Satellite Pro L650 turns off after start; DC In and Power LEDs blink on stop

  A friend Satellite Pro L650 having worked well until yesterday, all of a sudden turned itself off. Now, at startup, it lights up normally for about 10-15 seconds before turning off suddenly. Turned off, the DC in white/blue LED and the orange Power LED Flash on a broad set of intervals of approximately one second. This extinction happens if I leave Windows or press F2 to enter the BIOS setup.

  I guess this blinking is intended to serve as a kind of diagnostic code, but I have yet to track down what it means. Can anyone help?

  To avoid confusion, power without the product stack the same, sudden stop experience, except the two LEDs remain solidly lit this time. With or without battery, trying to turn on again immediately after that a shutdown produced no response at all. Remove the power cable and immediately it reconnect again and turn then produced a brutal power off, but in less than 5 seconds. More wait between attempts to market seems to give a little longer powered on State, but without fault, the machine turns off just suddenly. With its short time 'turned on' we are talking, there cannot be any kind of thermal protection?

  I had an old Satellite L450D lying around that uses coincidentally the same AC PA-1750 adapter, but use it made no difference. Of course, the battery does not have the L650!

  The only previous numbers, that I am aware of this machine have been intermittent case of Windows reporting "Plugged in, not charging", but as my friend use it exclusively on the network, it was not a problem.

  Your thoughts will be greatly appreciated...

  WTF?

  What is an unmoderated forum?

  Can someone help with my problem?

• Satellite A10 dies after the power LED blink

  Hello

  I have a problem with the power supply of my Toshiba Satellite A10. Sometimes, after the computer sat for some time, I have a problem with the power. The "plugged power cable" - LED will start to blink and shortly after, the computer just dies.

  It can also have the time to go into a lower energy state before he does. When it happened once, it will most likely happen also when I restart the computer, but after a much shorter time. WXP won't even have time to start. If I stop to select the source of start-up, the problem will occur anyway, this isn't the software. It should also be noticed that when the computer is not turned off, the 'smart power' - is on correctly.

  I know that my battery is not very good. Completely loaded, the computer can run for maybe 3 minutes with only the battery. I know that I must have a battery connected, even if I use the power cable, but this occurs even when the mine problem. The battery would be pretty bad not even allow me to use the computer with a cable?

  It should be added, that sometimes I can use the computer for long periods of time without this problem to happen. I also have a problem with the battery not being not properly in physical contact with the pins of the computer, but this isn't the problem here, because I have the same problem with the battery removed and me holding the battery in place.

  Thank you for your help.

  Andreas

  Hello

  You description is very long and detailed and it of still not easy to say what's wrong.
  Usually, the DC-In witness lights up green when DC is provided FRO the AC current. If the output voltage of the adapter is abnormal or if power outages, this indicator flashes orange.

  So I think that is your AC adapter malfunctions or there is something wrong with the electronic power supply on the motherboard.

• Satellite Pro A120-151 - switch and power LED blinks

  My 120-151 will stop when I used it. On the laptop, the power LED flashes: short-long-long-short-short-short-long-short

  Anyone know what this error code?

  Hi mate,

  I had a similar problem which stops my Satellite A300 and the power light was blinking. This happens always after 1 or 2 minutes.

  I decided to contact an authorized service provider. Technicians control the laptop and fix it for me. The repair took only a few days and it was free because the laptop was still under warranty.

  I hope I could help a bit! :)

• Satellite L750: HDD LED lit almost always - very slow system

  Hello!
  I have a TOSHIBA * L750 - 13 L * laptop with part #: * PSK30E-00R00EG4 *.
  The system was fast, but then one day suddenly it got very very slow. White led disk light remained on and opening the usual document (or even the jpg photo) obtained extremely slow.

  When I start windows 7 (64-bit), it works fine for a minute or two and then the hard drive lights all the time (with a minor stops). Opening documents at this point is pretty darn slow.

  I have discovered that when in safe mode (with or without networking), it works fine but when I run a normal mode, it is very slow. When I learned that I just did a clean install of Windows 7 64 bit on c: (format and install). Other two partitions d: and e: remained intact. Unfortunately, nothing has changed. When I installed all the drivers of light light HARD drive again and all went to "mode"snail".

  I installed avg, amr player 7zip, chrome and image resizer for windows, and all drivers needed in a correct order...

  What is a problem? He worked for six months without problem - I have not installed anything new... How to solve this problem? Why didn't - it's not a problem that appears in safe mode?

  Unfortunately, on this virtual path is not easy to offer the exact diagnosis but I assume that there is a problem with the HARD drive (bad sectors on HARD drive specific position).

  If the same problem occurs with own preinstalled OS, I presume the troublemaker is HDD. If you have the second disk HARD try to exchange it, reinstall the recovery image and test the features.

  If the warranty is still valid, I recommend that you contact the nearest Toshiba service provider, explain the problem and ask for help.