The update that went wrong?

Similar Questions

• After refreshing the computer, when it is about to finish the update that went FAILURE CONFIGURATION WINDOWS UPDATES

  Hello... I just UPDATE my computer and then when I started to update, when he is about to complete the update this showd upward

  DEFAULT CONFIGURATION WINDOWS updates what to do about it... my OS is windows 8

  Original title: I update my computer

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

• Management concept the exceptions that went wrong!

  Well, this is by far the most embarrassing hack code I've done so far... but it works. I'm trying to run a select where if there is no data or null returned, place it in the value "v_pidm"and then let the action happen.» Pretty simple, right? Fake! A select statement returns no data that uses a function 'en' is an exception... "no data found". Oracle, it sends to the exception block as it should. Well, I don't want to stop and start my script a million times here, I added a Begin/End sub, with an exception to handle the error to say and perform an insert. I know that you should not use a State of exception for inserts another capture errors... you know bad practices and all. Any ideas as how to better manage the select statement that must regularly return no data? I was thinking some along the line of nvl (v_pidm, 0) or something, but I get errors.
  

  set serveroutput ON SIZE 1000000
  set heading off                
  set feedback off                
  set trimspool off               
  set echo off                    
  set pagesize 0  
  set termout on
  
  
  Declare
  error     varchar(255); 
  v_pidm    number(8); 
  
   Begin
      Begin    
          select distinct saraatt_pidm  
  
          into
  
          v_pidm
  
          from saraatt, saradap
          where saraatt_appl_no = SARADAP_APPL_NO
          and saraatt_term_code = SARADAP_TERM_CODE_ENTRY
          and saraatt_pidm = 4;
          
        Exception
           when too_many_rows then
          error := SQLERRM;        
          DBMS_OUTPUT.PUT_LINE(' %% Oracle Error! %% The select statement returned more than two rows ');
             
          when no_data_found then
          error := SQLERRM;        
          DBMS_OUTPUT.PUT_LINE('Select Returned No Data . . . Therefore Insert new record for ' || v_pidm );
          
          v_pidm := -999;
  
          when others then
          error := SQLERRM;        
          DBMS_OUTPUT.PUT_LINE(' %% Oracle Error! %% An Error Occured ' || substr(error,5,20));    
      End;
      
      
      
   DBMS_OUTPUT.PUT_LINE('Pidm: ' || v_pidm);
  
   End;

  There is nothing inherently wrong with code like

  BEGIN
    SELECT column_name
      INTO l_variable_name
      FROM table_name
     WHERE some_where_clause;
  EXCEPTION
    WHEN no_data_found
    THEN
      l_variable_name := 0;
  END;
  

  It is perfectly reasonable to have exception handlers that make anything other than newspaper an exception if they can in fact wisely handle the exception (e.g., you know that the query may return 0 rows and you know how to handle this case correctly).

  You don't want an exception handler that simply calls to DBMS_OUTPUT. Put_line without re-raise the exception. It is a mistake to delay. And there is no real reason in this case to extract the SQLERRM in the variable error - it would be better to let the exception is propagated to the top so that you can see the full error stack.

  Justin

• Has anyone invented a way to get the emails that went to the wrong email address until the wrong person reads?

  Has anyone invented a way to get the emails that went to the wrong email address until the wrong person reads?

  To answer your question, you have to assume that once you have sent the email that it cannot be recovered. Think of it as dropping an old letter in a message box - you can't get it back once it is in the message box.

  The reasons are not only technological - it security, privacy, legal and political might be too (e-mail can cross multiple international borders).

  One hand practice also, what you want would be difficult because the emails will usually quickly reach their destination server and so can be collected by the recipient of email from this server as soon as sound here.

  By ensuring that you are writing your emails correctly in first place is the best.

• The error "something went wrong initialization library of creative cloud" in all office applications

  The error "something went wrong initialization library of creative cloud" in all office applications. I must have deleted the file CCLibrary 3 times and nothing.

  So I reached out using Adobe. Transferred 4 times, I'm done with that, nobody knew what to do. It is clearly a problem with the communication of the CC with the apps, and no one can figure out who can help, or what is responsible.

  It is a big reason why I do not have a subscription service, when something is wrong (and I needed this functionality), this is what is happening.

  It's terrible. More than two hours of my day for it. No thanks. I'll send my complaints to the top and be more public about Adobe helpdesk.

  Sheena,

  Suggested earlier, and I sent the contents of the current hosts at this time file here:

  ##

  # Database host

  #

  localhost # is used to configure the loopback interface

  # When the system boots.  Do not change this entry.

  ##

  127.0.0.1 obdev.at

  255.255.255.255 broadcasthost

  : 1 localhost

  FE80::1% lo0 localhost

  I had no idea what to change, and no suggestion was really given what to change.

  In any case, I also had the CC on my laptop, so I checked a few apps here, and the library worked well. So, I copied the contents of laptops to my main computer host file:

  ##

  # Database host

  #

  localhost # is used to configure the loopback interface

  # When the system boots.  Do not change this entry.

  ##

  127.0.0.1 localhost

  255.255.255.255 broadcasthost

  : 1 localhost

  .. .and now it works.

  Yes, thanks for pointing me to it, I was able to fix mine.

  Tom

• I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.

  I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.

  Hi Happyrockgeek,

  Welcome to Microsoft Windows 7 answers Forum!

  This problem occurs if the Windows security .dll files are incorrectly registered.

  To resolve this problem, you can perform the two methods of troubleshooting, check if the problem is resolved.
  Method 1:
  Run (Checksur.exe) system update readiness tool.
  To do this, follow these steps:
  1. download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/default.aspx/KB/947821
  2. try to install the updates again.
   
  Methods 2.
  Reset the Windows Update components.
  1. to reset the Windows Update components automatically, click the fix button in the link below.
  http://support.Microsoft.com/kb/971058 
  2. click run in the file download dialog box and follow the steps described in the fix it Wizard.

  I also suggest you to install the latest version of Windows Installer 4.5.
  Follow the link below to download:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en
  and you can also try to install after you turn off the firewall.
   
   
  It will be useful.
   
  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum.

• How can I keep the updates that I rejected following lists?

  How can I keep the updates that I reject in the following lists of available updates?

  Once you * hide * them - you won't see them even * less * they are re-certificate/changed/updated.  To whom it may * look like * see them again - but you can give the update more than a quick glance - because if she was re-certificate/updated / changed somehow - you might want to install this time.
  
  --
  Martin Stanley
  MS - MVP
  --
  How to ask Questions the Smart way
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

• How long can I keep the updates that are added to my computer

  If they can be taken how know which I should keep longer than others

  Do not uninstall the updates that have been installed in your operating system.

  If you do, you're interfering with the security and performance of your operating system.

  This is the reason for security and performance updates are installed: enforce your operating system safely and to its ability to best...

  See you soon. Mick Murphy - Microsoft partner

• Find that the updates that have been installed

  I can't locate the file or anything that shows me all the updates that were loaded on my computer. Please refer to this list.

  Thank you

  So say you that this windows update adds an extra user account? weird.

  Please identify the account?

• I can't not persistent install the latest update of Adobe Audition. It is not a CC version but came on disc in CS6. I constantly get this error message after you download the update that does not install: U43M1D207. What are the steps to complete t

  I can't not persistent install the latest update of Adobe Audition. It is not a CC version but came on disc in CS6. I constantly get this error message after you download the update that does not install: U43M1D207. What are the steps to perform this installation?

  Adobe Audition: For Macintosh

• Windows 7 update for the week of 06/09/2015 - that went wrong

  After the installation of 17 updates

  10 security

  6 win 7 x 64 and

  1 malware

  The icons of my wallpaper and the Office disappeared.  It has been replaced by a gray screen with 5 icons of base.  I saw a message of information relative to: connect to the files your doc and fav?

  I restored the machine to an earlier date to eliminate all of the updates.

  I don't know what to think except this set of updates have gone bad...

  Are that Win 7 is responsible for updating this, should I remove the updates of the victory and just install the other 11?

  TerO

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event to your OneDrive Viewer and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

  General remarks on event viewer
  http://www.gerryscomputertips.co.UK/syserrors5.htm

• Update graphics card that went wrong; Need help.

  Let me first, I the a6700f desktop model.

  Here's my problem... There is a month that I bought a graphics card for my computer, the NVIDIA GeForce 8400GS 512 MB DDR2 PCI Express graphics card, link below:

  http://www.BestBuy.com/site/olspage.jsp?skuId=8990407&type=product&ID=1218007083381

  . It was great to work on my computer, and I liked the fact that I can play higher quality video and games on my computer, which could barely handle with the 6150 it comes with. It worked fine for about 2 days, when my friend told me that he had the 8600 model given to him by his cousin, but because it was a PCI Express model, it has failed on its motherboard. So he let me try, because it was the card I have established originally to get (but the Best Buy had not).

  I pulled the 8400 which worked very well and replaced it with the 8600. When I turned on the computer later, the monitor never displays anything. I could hear the music start and everything, so I know that it was running; However, the monitor shows nothing. So I turned off has released the 8600 and then tried the 8400. Even if it was working fine before trying the 8600, the monitor wouldn't read something with her. I thought it would be the monitor that was just straight up, so I tried another. The same problem. I then looked online and saw some article talks about food that may be too low because the amount required for the 8600 was 300w, exactly what my computer. So, I went to Best Buy and bought a 450w power supply and tried with that. Still did not work. I thought it could be the graphics card, so I returned it and got the same exact model, just a new. Still did not work. I even reformatted my entire computer to the settings it had when I bought it, and nothing has worked. I tried to clean my computer, searching for scratches and haven't found anything.

  The only way that the monitor has worked has been without any graphics in it (just the 6150) he built). I've been turned off to repair, because I know in general how to solve small problems like that, even if I can't know all the technical terms for computers (I'm more a guy who recognizes the parts and what they do).

  If someone knows a solution that I have not yet tried, please let me know about it so I can give it a shot and no waste of money do repaired and it have to be a simple solution.

  ----

  Additional information:

  I bought this computer some time in February this year, so it is still fairly new. However, I don't have the receipt so that it doesn't matter where, so I don't think I'm able to do anything with the warranty on it. I have also heard people that they do not cover damage of upgrades (don't know if it of true or not). Is there a way I can still make them fix it, or just get it replaced?

  Message edited by Luckybucket on 01/06/2009 19:42

  The pci-e slot is damaged and I suspect that this has been done when you were installing the 8600. It is not too difficult for the location on the motherboard with static damage physically or a force applied the wrong angle. HP will simply not provide a warranty if you have haveis a computer that cannot be used with the integrated graphics card or maybe (shudder) a simple pci card video.

• What was the update that I received this morning?

  My 4G Verizon Xoom got an update this morning, and it is common in the version Android is 3.2.6

  I don't see any other posts about it. What I get? I am not registered for soaking tests on my Xoom, I know... I'm on my Bionic so I know what the process looks like.

  Assuming that you mean that you are on 3.2.6 after the update so this link should describe what it was. Everyone who is Verizon will get if they have not already.

  https://forums.Motorola.com/posts/b46462e387

• How to save install them all the updates that Windows Update downloads and installs automatically (when the automatic update is enabled).

  My automatic update of Windows 7 did a great job, whenever I discovered a new criticism / or useful update is available on the microsoft site / or any other tech site, I always find the update is alreay installed via Windows automatic update (thanks microsoft)... but I want to save all these (the installation program updates (, of course) that I can use to update all the other windows 7 running pc with no internet connection.

  is this possible?

  My automatic update of Windows 7 did a great job, whenever I discovered a new criticism / or useful update is available on the microsoft site / or any other tech site, I always find the update is alreay installed via Windows automatic update (thanks microsoft)... but I want to save all these (the installation program updates (, of course) that I can use to update all the other windows 7 running pc with no internet connection.

  is this possible?

  Updates automatically downloaded cannot be reused. Suggest you open the link "View update history" of the icon of the Windows Update control panel and write updates have been downloaded and installed.
  Then download and save them from the Microsoft Download Center .
  Just enter the number in the field to Search All Download Center and then click on the "magnifying glass" to start the search.
  You can also change the language and geographic location by clicking on the link edit in the top right of the page.
  MowGreen MVP Data Center Management - update of safety Consumer Services

• XP and still receive the updates that will not be powered off (except by pressing the key stop for 10secs) computer.

  Started to have a problem with the computer, download the updates, but seems never to end.  Computer can be left running all night, and he said again it is the download of updates and should not be extinguished.  It can be turned off only by pressing the power button on the computer for about 10 seconds, or just unplug the computer.  There is clearly a problem here, but do not know how to solve.  Any help out there?, thanks in anticipation. PP

  Hello

  Were there any changes made to the computer before the show?

  Please follow the methods and check if it works very well.

  Method 1:

  Run the Microsoft fixit for the link.

  Check out the link:

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

   

  Method 2:

  Follow the steps in the link.

  Check out the link:

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  NOTE: Before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

  Using the windows-related issues feel free to post on the Microsoft Community Forum.