The upgrade from 4.1 to 4.2.1 does not load images (EPG)
Hi allI have had a problem upgrading to APEX of 4.1 to 4.2.1 using the full installation with all languages.
I managed to fix it myself, but still I don't know why she failed the first time. This is why I post this message. In addition, to help others which falls on this problem.
-I am trying to install the 4.2.1 on Oracle 11 g XE APEX.
-J' use the gateway (epg) integrated plsql
(1) I unzipped the file to C:\Oracle\apex_4.2.1\apex
(2) to this directory, I started sqlplus:
C:\Oracle\apex_4.2.1\apex > sqlplus sys as sysdba
SQL:
SQL > exec dbms_xdb.sethttpport (0);
SQL > @apexins.sql USERS USERS TEMP is
SQL > exec dbms_xdb.sethttpport (8080);
Then I restarted the listener.
I went to localhost: 8080 / apex, it transmits to localhost: 8080/apex/f? p = 4550:1: < sessionID > using Chrome. But a white screen appeared. It's something that happens to a lot of people (I read a lot of these problems on the forum)
After some research, I noticed that the script did not create the new directory of images. I still had the images of 4.1 directory! So I backupped the old images directory and downloaded the directory images manually using fileZilla (open a session with the SYSTEM)
Then when I tried to go to localhost: 8080/apex/f? p = 4550:1: < sessionID > I had this popup: "the local server to XDB host requires a user name and password.
This happens in all the major browsers (IE, Firefox, Chrome)
Searching on the forum I found messages indicating there is a problem with IE 7, do I have to run this statement: "change user xdb unlock account;" But I tried with nothing doesn't. I continued to get the command prompt. When I clicked on cancel I couldn't see anything. When I used sqlplus xdb/xdb@xe it worked fine.
Next thing I've tried manually removed the images directory. So I ran @apxldimg.sql (parameterless) and the images directory has been recreated, but it contained the old 4.1 files magically! When I went in the hot folder on the installation disk I could clearly see a folder images/apex_ui but it does not simply exist in the database after the execution of apxldimg.sql.
Then I found something in the code of apxldimg.sql. Apparently, it creates a directory on the database to aid & images/apex/1... If the substitution variable '& 1' must have been the location of the files the and it must contain the full path!
SQL > @apxldimg.sql C:\Oracle\apex_4.2.1
After you run this files have been created successfully and I could finally connect.
...
One question remains: Why can't find anything in the log on the loading of the images? And why it did not work via apexins.sql? He completely skipped this step, because no trace of it has been found anywhere in the Setup log. This could be a bug?
Thank you
Dennis.
Dennis,
The apexins.sql script does not take care to install/load the images. Install images has always been a separate step that is often neglected (it is a different process according to the HTTP server, we chose to use). http://docs.Oracle.com/CD/E37097_01/doc/install.42/e35123/otn_install.htm#BHAJIGDA
The majority of the 'white page' problems on the new facility holds the images not being loaded correctly.
-Jeff
Tags: Database
Similar Questions
-
My business is at a stand still until I can understand it, any help is appreciated
Uninstall the new version and reinstall 2014 CC from previous versions tab in the CC management application.
-
Can I upgrade from lightroom 5 to 6 or 6 does not exist anymore, and my only option is to Lightroom CC?
Hello
You can proceed to LR 6.
Please see store Adobe - Adobe Lightroom 6 - upgrade
Hope that helps!
Kind regards
Sheena
-
Firefox is not fully load site Barclaycard of authentication. It load regarding the demand for certain letters in my password but does not load the button 'Submit', so I can't continue with my purchase and I switch to IE8 browser to buy anything on the internet. Clues?
This has happened
A few times a week
Is a few weeks ago
Your UserAgent string in Firefox is totally messed up by another program that you have installed and Barclays does not know you use Firefox 3.6.6 - it is probably similar to IE 6.0 on this site.
http://en.Wikipedia.org/wiki/USER_AGENTtype of topic: config in the URL bar and press ENTER.
If you see the warning, you can confirm that you want to access this page.
Filter = general.useragent.
Preferences are "BOLD", a line at a time, and then select reset, right click
Then restart Firefox -
I restored the system backdated daily to remove scareware. Firefox does not load
A naughty site prompted me to a lot of Windows security to scna for threats. After I discovered that it was not authentic I ran a restore of the system and with retroactive effect of a day. Now Firefox does not load when I click on the desktop icon. I am running XP Pro, Firefox 9.0, Quickheal antivirus. What is a common fault?
You can run a clean installaation of 10 Firefox and check
-
HP 10 G2 2301 Tablet: the correct charger for Hp 10 G2 2301 Tablet does not load
The original charge cord for my Hp 10 G2 2301 Tablet does not load my tablet.
Hi there @Bb16,
Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that your tablet will not charge with the charge lead. I'm happy to help you with this.
as you said that you are using the correct charge lead, I understand this document for reference: G2 HP 10 tablets - the Tablet is not fresh, I suggest to try your adapter into a different electrical outlet, preferably with a direct connection to wall to remove any other question possible bad connection.
Y at - there no sign that there is no power at all?
The connector on the Tablet seems to be loose?
If you have access to another adapter, also, try to avoid the card itself.
If none of those who make a difference, then browse this document. Tablets - HP Tablet does not (Android 5.0/Lollipop).
If at the end, you are still having the same problem, then please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html
Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.
-
I am the administrator on my pc. and my user profile does not load.
recently, when I connect I get a message saying that the user profile does not, or will not, support. How can I fix it? Be admin, I can't make all the changes that my profile does not load. I can connect with my husband and children, as their loading user profiles, but, when I try to make changes and type my password properly, it won't connect so I can't do anything! Help! Thank you!
Yes, you will lose everything when you re-install.
If you are able to logon to an account that can back up personal files as much as you want to keep on an external hard drive, or Flash drives or DVDs.
You will need to re - install all the programs you already have installed.
-
Windows 7 upgrade from 32 bit to 64 bit, 64 does not start on its own
I am trying to upgade win 7 32-bit to 64-bit. I bought a new copy of Windows 7 Home premium 64-bit. It does not start on its own, is there some
type of bootloader on the net. who's going to help or what!
To learn how to change your BIOS options to boot from the DVD drive, the following tutorial:
http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/
-----------------------------------------------
You will need to do a clean install, there is no place on the way to upgrade Windows 7 32 bit to 64 bit.Using the disk of 64-bit Windows 7, install Windows 7 Windows Easy Transfer Utility from the DVD (to find it, simply navigate to x:\support\migwiz, "x:" is the name of your hard drive. (In this case, you will see a collection of files, the important"that you must search for and double-click is 'migsetup'.) run it and create a DAMP (Windows Easy Transfer file), if you have an external hard drive, you can access it later when you perform a clean install of Windows 7 64-bit disk so you can stored there.
Once you have done this, just do a clean install of Windows 7 64 bit disc. In Windows 7 64 bit disk, start Windows Easy Transfer, follow the wizard screen, tap on which is stored the WET file (external hard drive) and it will restore your personal files and settings. Reinstall the applications needed.
http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/
-
D7 3180 US: after the upgrade to windows 10, hp dv7 remote control does not
Hi guys!
I have a HP DV7 3180 us that I have upgraded to windows 10. I have 3 basic system devices that are listed as unable to find drivers for them. I guess that one of them is one that allows me to use my remote, as now it does not work. I was unable to find a windows 10 driver, or anything that can help me solve the problem. I tried to have HP scan my computer and update all the drivers, but course who has failed several times.
Thank youKyle
Hi, Kyle:
You need this driver for basic system devices...
This package contains the driver for laptop models JMicron card reader supported and operating systems.
File name: sp45010.exe
You can use this driver for the IR remote...
This package contains the ENE CIR Receiver driver for laptop models supported and operating systems.
File name: sp44983.exe
-
cfimage does not load image from URL
So I have a URL as a string in a variable, and I will try the following:
< cfimage action = "read" name = "MyImage" source "#myUrlString #" >
And I get the following error:
faultCode:Server.Processing faultString: 'Impossible to invoke the CFC - a exception has occurred trying to read the image.' faultDetail: "File C:\Inetpub\wwwroot\my\cfc\path\"https:\my.domain.com\imagefile.jpg"does not exist.'"
It is clearly adding at the beginning of the path to the file on the URL string .cfc. How do cfimage to simply load the image of the URL without that he's trying to precede the path of the top .cfc file?
(I also tried ImageRead and ImageNew with exactly the same results).
Thank you
Laurence MacNeill
Mableton, Georgia, USA.
Yes, it was put me dummy code in my question... Sorry...
I figure out the problem a few minutes before, however.
It turns out that the URL string had quotation marks around it. Oops...
If my URL variable contained "https://my.domain.com/imagefile.jpg" * which * quotes... Once I removed the quotation marks in the string, it works.
Thank you
L.
-
I am from the streets and travel 2011, Windows 7, and it does not load.
First of all, it tells me to load visual c ++, and then he said. "one of the prerequisite components failed to install. the installation program will now stop. "
How can I get this program to load?
He made this before she even begins to download files.
Hello
Check with the streets and the support of the TRIPS agreement
Streets & Trips
http://www.Microsoft.com/streets/en-us/default.aspxStreets & Trips - help and Support
http://www.Microsoft.com/streets/en-us/support-and-training.aspxStreets and travel community
http://www.Microsoft.com/streets/en-us/community-and-news.aspxStreets and travel Forum
http://social.Microsoft.com/forums/en-us/streetsandtrips/threadsSupport for MapPoint, streets & trips and Highway
http://support.Microsoft.com/ph/851============================================
Package redistributable Microsoft Visual C++ 2010 SP1 (x 86)
http://www.Microsoft.com/download/en/details.aspx?ID=8328Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86)
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=5582Microsoft Visual C++ 2005 SP1 Redistributable Package (x 86)
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=5638There are x 64 Bit packages if necessary:
Package redistributable Microsoft Visual C++ 2010 (x 64) SP1
http://www.Microsoft.com/download/en/details.aspx?ID=13523Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=2092Microsoft Visual C++ 2005 SP1 Redistributable Package (x 64)
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=18471I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
The problem is on my desktop and my laptop. I got a little happy click on my desktop and click the Web Developer. I tried to remove an ad really annoying flash on the side of the screen. I think I entered in the source page and remove the node. I really don't know what happened, but stopped loading for ebay pictures and everything is a list written on the side of the page. I deleted the cache and cookies. I have reset mozilla. I uninstalled and reinstalled mozilla. Laptop is not immediately affected, but now having the same problem.
It is a very strange problem.
Any changes made with the web developer tool will save and should be cleared when the page is reloaded.Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.
You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).
Then perform the following steps:
- Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
- In the Firefox options window, click the Advanced tab, and then select 'General '.
- You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
- Now restart Firefox and see if the problems persist.
In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:
This solve your problems? The report please come back shortly.
-
After the upgrade to Firefox 6.0.2 first flash content was not displayed, but now the plugin does not load. Firefox plugin check says Flash is obsolete, but I just downloaded it from the Web site.
Mac OS X 10.7.1
Firefox 6.0.2
Flash 10.3.183.7The current versions of Firefox are 64-bit on OS X, if you need a 64-bit version of Flash with Firefox 6.0.x or you must start Firefox as a 32-bit application to be able to use a 32-bit version of a plugin.
- Closing of Firefox
- Launch the Finder and open the Applications folder
- Make a right click or Ctrl-click the icon of Firefox.app
- Select "Get Info."
- Select or deselect the option "open in 32-bit mode".
- Close window "Firefox Info"
- Restart Firefox
-
Number keys don't work since the upgrade from vista to windows, anyone know why?
Numbers on my laptop keyboard keys don't work since the upgrade from vista to windows7, anyone know why? Keys of numbers very well work in office and other software for browsers
See the following troubleshooting steps below thanks Azam K with Microsoft Support:
Try to activate the numeric keypad and check if it helps, here are the steps:
1. open on-screen keyboard by clicking theStart button,all programs, Accessories, easy accessand then clickingOn-screen Keyboard.
2. click onOptions, check thepad box and then clickOK.
I also suggest you to start the computer using safe mode and check if it works properly, following the steps:
1 restart your computer if it is running.
2. tap on the F8 key after your initially on powers computer.
3. Once you see the menu Advanced Boot Options, you can stop tapping.
4. use the up/down arrow keys to highlight your selection.
5. select Safe Mode and press ENTER.
6. you should see loading drivers and wait please.
7. you should then be at the Welcome screen.
8. connect to your computer using an account with administrator privileges.
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-modeIf it works fine in Safe Mode, then try to perform the audit and the clean boot, here's the link:
http://support.Microsoft.com/kb/929135
If it is not working in Mode without failure, then try the System File Checker and see if it helps, here are the steps:
1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
2. click on continue or provide administrator credentials if prompted.
3. in the command prompt window, type the following text, and then press ENTER:
sfc/scannowHere is an article that will give you information about Scan SFC:
http://support.Microsoft.com/kb/936212I hope this helps!
OT
Change options for accessibility on Windows 7
Control Panel
l---> ease of access Center
I---> make the keyboard easier to use
I---> uncheck "turn on mouse keys. -
The upgrade from Photoshop Elements 10-15?
Hello.
Is it possible to upgrade Photoshop Elements 10 directly to 15, No 11-14 versions?
Thanks, Jenny
Yes, you can get the upgrade from any previous version.
See what's new:
Maybe you are looking for
-
How to use several addresses e-mail using Thunderbird
I had only one AOL email address I've used via Thunderbird.I have now created an another e-mail address of AOL for a specific reason.How can I start to use this new email via Thunderbird address?
-
Will XP work very well on a Vista Satellite Pro L300-153
Hello I'll buy the Toshiba Satellite Pro L300-153 vista laptop, but I intend to use XP on it.If I destroy the entire vista and install XP, then use all of the drivers listed on this site for XP, my system would work fine with XP but it's a computer v
-
Maintain the value of the indicator after the threshold is exceeded
I have a part of my VI using an auto indexed for loop to display an array of 10 values boolean indicating if a threshold test has been exceeded. If a false value is received on any one of these 10 channels, I need to have a light, the temperature of
-
ring personalized photo: disable the context menu
I ring personalized photo - classic controls those - and they work very well when you click on the increment and decrement, however by clicking anywhere on the image causes a little popup to appear - as the ring menu control - which shows all the ima
-
memoryconsumption-ASAM ODS - AOP5 (Speicherproblem)
for txt German please read below... **** Hi @ all, I had a problem with memoryconsumption in the code as follows: [...] Call OdsValAlloc ("VehicleList", "Ods_TYPE_INST", 1). Call OdsInstList ("Vehicle", "State = 1 VehicleList", "", OdsHandle) intAnza