The upgrade of sensors with automatic update

Similar Questions

• Component of Windows Installer keeps poping up services.msc tried to stop but he comes back a few seconds, a few times it will not be quick to stop also tried msiexec unreg won't. The following will install manually or with automatic updating.

  Component of Windows Installer keeps poping up services.msc tried to stop but he comes back a few seconds, a few times it will not be quick to stop also tried msiexec unreg won't.  The following will install manually or with automatic updating.

  Microsoft .NET Framework 3.5 SP1 and .NET Framework 2.0 SP2 Security Update for Windows 2000, Windows Server 2003 and Windows XP x 86 (KB979909)
  Security Update for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2416447)
  Update Microsoft .NET Framework 3.5 SP1 for Windows Server 2003 and Windows XP x 86 (KB982168)
  Security Update for Microsoft .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2418241)
  A security update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB983583)
  Microsoft .NET Framework 3.5 SP1 and .NET Framework 2.0 SP2 update for Windows Server 2003 and Windows XP x 86 (KB982524)
  Update of security for Microsoft Office PowerPoint Viewer 2007 (KB2413381)
  Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86

  Hello

  ·        Since when are you facing this problem?

  Windows Installer service is damaged. I suggest you follow the steps mentioned below.

  Method 1:

  I suggest you follow the steps mentioned below.

  Step 1:

   

  a. click on "Start" and then click on 'run '.

  b. type 'cmd' or 'command' in the box and click on 'OK '.

  c. type each of the following commands, and press 'Enter' after all the world:

  CD %windir%\system32

  Ren msi.dll msi.old

  Ren msiexec.exe msiexec.old

  Ren msihnd.dll msihnd.old

  output

  d. Type "exit" at the command prompt to close the command utility.

  e. restart your computer.

  Step 2:

  Download Windows Installer from the following link and install it on the system and see if the problem is resolved.

  Windows install 4.5 Redistributable

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

   

  Method 2:

  I suggest to reset the Windows Update components and then try to install updates on the system and check. Follow the steps mentioned below.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  For more reference, click on the link below.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• every time that the computer shuts down, (IE Automatic updates), recent documents is empty.

  original title: recent documents: every time that the computer shuts down, (IE Automatic updates), recent documents is empty. How do I prevent this? Very frustrated Ruth

  Recent documents: every time that the computer shuts down, (IE Automatic updates or I turn off during the night) recent documents is empty. How do I prevent this? Don't know if the following has nothing to do with it, but - about 6 months ago I reinstalled XP, since then I have no sound and comes to the foregoing. Oh and to add, at the same time, I've changed hard drives up and down, which means that I have and that he had 2 hard drives.

  Very frustrated Ruth

  Hello

  Try the steps below to solve the problem.

  Caution:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  (a) open the registry editor and navigate to:

  HKEY_CURRENT_USER-Software-Microsoft-Windows-CurrentVersion------Explorer-advanced

  (b) save the key in a file. See the article of support upward.

  (c) the value of Start_ShowRecentDocs as a result.

  (d) value of 0 - list of my documents most recently opened is disabled
  Value 2 - list my most recently open documents is enabled

  Note: set the value to 2.

• a way to change the style lightbox - all viewers automatically update?

  Hi guys, im setting up a video portfolio site and I went initially to have several thumbnails on each page, each trigger, an album containing a video.

  at a later stage, I might want to change the size of the black box that surrounds the video (I think what its called the container), or add an image / change color etc...

  My question is, is there a way to set up as a model so that when I update one, they are all up to date?

  It worries me because I have about 40 vignettes, each link to an album.

  Thank you

  Hello

  If you change the size of a container of the widget HTML composition, Muse automatically updates the containers of other videos of lightbox that you used, as long as you used a single with triggers lightbox widget with multiple targets.

  However, I must tell you that muse will update the size of the container and not the positioning of the videos, so if you want to adjust the positions of the videos too, then you will need to do so individually.

  Hope this helps

  Kind regards

  Rohit Nair

• update date and time for 3.6 numbers does not show the time and does not automatically update the date

  The 'update date and time"for numbers of 3.6 does not show the time and does not automatically update the date.  What should I do?  Thank you.

  Hi david,

  where do you find ' update of the date and time.

  Quinn

• I can't change the date & time to receive automatic updates of Windows XP - help!

  How can I change the date & time to get automatic updates - I've tried everything and did what I was asked to do - still not able to do!       Lin

  What happens when you try to do?

• Install Office 2010 with XPSP2 upgraded to SP3 of automatic updates

  I just install Office home and student 2010 family, on a new laptop pack and Windows 7. When I try to install on my dsktop (XPSP2 Auto updated to SP3) I get a message "the installer is unable to act because of the following error: ' install and use this product, you must use one of the following programs: x 86 platform: Windows XPSP3'." It seems that she admits not SP3. I check the automatic updates. seems OK, but still "unable to installer.NET Framework 1.1 Service Pack 1." This happens with the disc or a download of the computer and is exactly the same on my laptop, even set up as an office except Professionan od XP version. I put the problem to MS, but they just turn me round and round in circles.

  http://social.answers.Microsoft.com/forums/en-us/OfficeInstall/threads?LC=1033&filter=answered

• Windows Vista is freezing after brief use. It began after the machine has run an automatic update on Wednesday morning (11/11/09). Have their problems with the update?

  The machine is relatively new and was working perfectly until the upgrade.

  Hi iapr97

  Welcome to the Microsoft Answers Forum!

  We would like to know more information related to this topic

  ·         You receive a correct error message or error number when the computer crashes?

  ·         All updates were installed successfully? Are there updates failed?

  To check if there are updates failed, follow these steps

  i. Click Start, in the search box, type in update

  II. click on windows Update

  III. click view update history

  I recommend you to start the computer in a clean boot to determine if any third-party application is at the origin of the problem. To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to run check and clean boot if you have the problem.

  i. Click Start, type msconfig in the search box and press ENTER.

  II. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  III. in the general tab, click Selective startup.

  IV. under Selective startup, clear the check box load startup items.

  v. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  VI. click OK.

  VII. When you are prompted, click on restart.

  VIII. after the computer starts, check if the problem is resolved.

  If the problem is resolved, check what is the cause of the problem, referring to the link given below: http://support.microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  i. Click Start, type msconfig.exe in the start search box and press ENTER.

  II. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  III. on the general tab, click the Normal startup option and then click OK.

  IV. When you are prompted to restart the computer, click on restart.

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The computer is stuck on automatic updating when closing down.

  During execution of the closure procedure an automatic update starts and had not finished after many hours. Even if it says do not turn off or unplug, because the computer will turn off automatically, I had to do. Now when starting, it still considers that it is updated, and other programs do not work correctly. I need to start in safe mode to restore, because the system restore does not start. How that I start in safe mode? And why the automatic update is causing this problem? It's never happened before, so there must be a bug in the update, and I can't stop it starts up because it is automatic! Someone Please helpme!
  My computer is using Windows XP Professional
  Thank you very much

  http://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.WindowsXP.General

  Above is the link to XP Newsgroups.

  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.windowsupdate&cat=en_us_d99bb655-a5d5-4C07-bdb0-90caf9f30c42&lang=en&CR=us

  Problems with the binding update Windows XP

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon

  These are the Vista Forums. Mick Murphy - Microsoft partner

• problem with automatic updates and Microsoft Update in Windows XP Service Pack 3

  My sister has a problem with the automatic updates. He has offered 6 updates and she moved them, but next time, she turned on the computer, he was offered the same 6 updates again. She has set up 5 or 6 times now, but she is always offered the same 6 updates every time she turns on the computer.  She tried yesterday to go to the web site Microsoft Update and update his computer, but it runs into the same problem. Microsoft Updates installed updates to update, but after restarting the computer and try to update again, he was offered the same 6 updates.

  I try to help fix and I need help.

  I tried stopping the service automatic updates, delete the contents of the download folder, update the Microsoft Updates web site and then by restarting the service of updates without result. She also tried to remove the 4 updates, she could find in Add/Remove Programs, but also without result.

  Help, please.

  Thank you

  You will be unable to effectively hide or update except if you have finished #2 in my previous answer.

  Or you can open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run the difficulty in DEFAULT and modes then AGGRESSIVE and then restart. [1]

  Note: Microsoft offers free support for security updates only. Since KB982524 KB982168 & NOT related to security updates, free support is NOT available for them.

  PS: Updates of July 2011 have gone 'live'-online http://www.microsoft.com/technet/security/bulletin/MS11-jul.mspx

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove programs.

• problems with automatic updates from microsoft

  have hp pc running xp pro version 2002 service pack 3, and when I allow the automatic update (kb2661254 or kb2749655 or kn2756822) to install the machine restarts.

  I try and install one at a time and each restarts the machine?

  Win update works better with ie8.

  one or more of your defenses can be cousing problems with updates.

  other updates at the same time comeing too can couse problems.

• How to upgrade KB911895 than my automatic update continues to send me. I get a code error 0 x 80070643

  The automatic update sent two updates to do.  I tried several times and it comes up saying: filter (KB911895) did not pass tests Windows Logo to verify its compatibility with Windows XP.   So I went to Update.microsoft.com; Fix for the technical problems of Microsoft Update; and on a site that Microsoft told me to go, to get the last system update.  And a little more.  I don't care if it's updated, but I want that he stop sending me the update, where I have this yellow shield in the bottom right of my screen.  I don't know that always be there, if there is an update I have to do and every time I click on it to see... these two updates with the same titles developed.  Don't know what else to do.

  I had my PC cleaned and passed by the technicians to Office Max and was also something they called "Push" is added in order to make my computer faster.  I don't know if this has anything to do with it, but it's the only different thing that was done to my computer in 2 or 3 years.

  Hello

  You can run the fix it link and check if this may help: you receive the error 0 x 80070643, error code 0 x 643 or updates may be offered again when you try to install .NET Framework updates when you use Windows Update or Microsoft Updates: http://support.microsoft.com/kb/976982

• The upgrade to vCenter 2.5 update 4 for vSphere 5.0

  I just realized that my vCenter 2.5 is only to update 4. I plan on creating a 64-bit VM and then perform a new installation of vSphere 5.0. Since I do a new install, I have to worry first update of my vCenter update 6?

  Thank you

  With a new installation, you don't have to worry about the upgrade of update 5

• The connection of sensors with rs232 to the computer output

  In my project I want to display & connect the results/readings of different types of sensors (RTD, barometer, HR sensor, proximity sensor) with rs232 outputs in the Labview software.
  To do this, can I simply connect them to my computer using the usb-rs232 converter or do I need a data acquisition equipment to convert analog signals into digital signals?
  If so, please suggest a device suitable for my requirement. Im trying to keep things simple and complete this project within a limited budget

  Thanks in advance

  Sensors with outputs RS-232 already have the analog-digital conversion.  You just need the USB RS232 converter. Many people have reported on the Forums that converters with FTDI chips seem to have less problems than other materials.

  You should also the Protocol of communication with manufacturers of sensors to correctly set the parameters of the serial port and to decode the results.

  Lynn

• Trying to open progrsam with automatic updater.

  I down loaded a program that has an automatic update. Whenever I try to start it, it says automatic updater does not. I have loaded several times redown. I ran as administrator and it still will not update and start the program. How can I fix it?

  Maria

  Hello

  ·         What operating system do you use?

  ·         What is the name of the program you downloaded?

  ·         What is the exact error message you get?

  About the program that you are not able to use, I suggest you to contact their support site for assistance.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this helps