The upgrade of XE 10g to 11g XE... I must first upgrade Apex?

Similar Questions

• Impossible to upgrade the schedular schema from 10g to 11g

  Hello
  
  Im doing an upgrade of the schema S_NQ_SCHED from 10g to 11g, its failure to upgrade, while the review, he throws the error in the log below:
  
  
  [2012-03-16 T 12: 09:21.363 + 02:00] [BIPLATFORM] [ERROR] [update. BIPLATFORM] UPGCMP-05001: table 10 g S_NQ_SCHED. S_NQ_JOB. Oracle.IAS.mrua.plugin.BI.DBTable@6a493b65 does not use the default columns.   He can't be updated[2012-03 - 16 T 12: 09:21.363 + 02:00] [FrameworkMR] [ERROR] [UPGAST-01008] [update. FrameworkMR] review of the scheme has failed for Oracle's BI platform.
  [2012-03-16 T 12: 09:21.363 + 02:00] [FrameworkMR] [ERROR] [update. FrameworkMR] Cause: upgrade framework determined that the review of upgrade phase failed for the named component. This is often due to a the prerequisite check failed. No patterns changes have been made to the component that failed. Action: Check the log files upgrade for the cause of the message. Fix the source of the problem if possible and start the exam. Do not have to perform a real upgrade upgrade all components unless mode to succeed during the review.
  [2012-03-16 T 12: 09:21.363 + 02:00] [FrameworkMR] [NOTIFICATION] [update. Failure_total M_upgradeMode 1 FrameworkMR] N
  [2012-03-16 T 12: 09:21.363 + 02:00] [FrameworkMR] [NOTIFICATION] [update. Failure_total M_upgradeMode 1 FrameworkMR] N
  [2012-03-16 T 12: 09:21.363 + 02:00] [FrameworkMR] [ERROR] [UPGAST-01015] [update. Specific software components FrameworkMR modules] some update of the repository report the failure.
  [2012-03-16 T 12: 09:21.363 + 02:00] [FrameworkMR] [ERROR] [update. Cause FrameworkMR]: one or several modules specific to software components returned a status of error during upgrade from the repository. A few other components could be upgraded successfully. Action: Review upgrade logs to determine which components have failed and locate the source of the errors for each component. Correct the conditions that caused the errors. It may be possible to restart the upgrade.
  [2012-03-16 T 12: 09:21.379 + 02:00] (Framework) [NOTIFICATION] [update. Finishing frame] examination of the components.
  
  
  
  Kind regards
  KK

  KK,

  When we install OBIEE 11 g, we run a repository creation utility (RCU) creates two schema called schema of metadata (MDS) and BIPLATFORM.
  The planner of all associated tables were created in the BIPLATFORM schema.
  If Enterprise Manager (EM) takes these patterns automatically and executes BI 11 g Planner services.
  Connect with the BIPLATFORM schema in the data source. Here we can see the Scheduler tables S_NQ_JOB, S_NQ_INSTANCE, S_NQ_JOB_PARAM, S_NQ_ERR_MSG which are born already when we ran RCU related

  For more information,.

  http://allaboutobiee.blogspot.in/2012/03/creating-agent-in-OBIEE-11g.html

  Thank you
  Oldia...

• to set the variable env for 10g and 11g under single user

  Hi all;

  Hello all;

  I installed 10g on a Linux software.

  I'm going to install 11g s/w on the same system.

  the user is oracle. I'm not scabies .bash_profile.

  Instead of .bash_profile, I intend to use the file.

  How can I run or maintain the env files for the same user.

  approx 10g file:

  ORACLE_BASE = / u01/app/oracle; export ORACLE_BASE

  Export ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1

  export PATH = $ORACLE_HOME/bin: $PATH

  export LD_LIBRARY_PATH = $ORACLE_HOME/lib

  Export EDITOR = vi

  file of approx 11g:

  ORACLE_BASE = / u01/app/oracle; export ORACLE_BASE

  Export ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_1

  export PATH = $ORACLE_HOME/bin: $PATH

  export LD_LIBRARY_PATH = $ORACLE_HOME/lib

  Export EDITOR = vi

  Thanks in advance.

  Remove the semicolon after each line in the file ora11.env

  Copy paste below in ora11.env

  export ORACLE_BASE = / u01/app/oracle

  export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/db_1

  export ORACLE_SID = test

  export PATH = / usr/sbin: / usr/local/bin: / bin

  export PATH = $ORACLE_HOME/bin: $PATH

  export LD_LIBRARY_PATH = $ORACLE_HOME/lib: / lib: / usr/lib

  Export CLASSPATH = $ORACLE_HOME/JRE: $ORACLE_HOME/jlib: $ORACLE_HOME/rdbms/jlib

  Export EDITOR = vi

  HTH

  Anand

• Backup of the contexts in MRI (10g and 11g)

  Hello
  
  We have a few customers concerned about the possibility of accidental deletion of a context and that it cannot be recovered. We understand that if we have a copy backup of the database, it could be reinstated at a point prior to the removal of the context. In this way, we could still have access to the documents sealed in this context. But apart from this solution, there is another mechanism that allows to recover the deleted context?
  
  Thank you.

  Interesting ideas Jiri.

  By default, if you delete a frame in the IRM server, the only return is to restore a backup of the database.

  Kind regards
  Frank.

• Migration of schema of 10g and 11g

  Hello
  
  I spend about 2 GB in size of schema 10.2.0.4.0 11.2.0.2.0 helps users including expdb/impdp & his password and DBA_DIRECTORIES.
  OPERATING SYSTEM: AIX
  
  My questions are,
  
  1 > I know the OBJECT_TYPE below which we can not able to migrate using expdb/impdp?
  
  
  OBJECT_TYPE
  ------------
  INDEX
  PROCEDURE
  TYPE
  TABLE
  VIEW
  FUNCTION
  TRIGGER
  PACKAGE BODY
  SEQUENCE
  PACKAGE
  LOB
  
  2 > how to synchronize the password n/b 10g and 11g for 11g password is case - sensitive.
  
  THX,
  Gowin

  Check this link http://laurentschneider.com/wordpress/2008/03/alter-user-identified-by-values-in-11g.html

• WebLogic user lost all the previlages after the upgrade of the RPD to 10g to 11g to help upgrade wizard

  Hello

  I have improved my RPD and catalogue of 10g and 11g using Upgrade Wizard and after that when I connect with the weblogic user I can't see the link to the administration and also I don't have the previlage to create the new analysis also. Will be that the upgradation of 10g and 11g has made some changes to weblogic user? Need advice on this subject.

  Kind regards

  MK.

  Check the privileges section of manage and seek other roles assigned to them.

  Ideally the BI administrator must obtain the copyright, consumer

  Thank you

  Angelique

• The upgrade of database 10g to 11g with minimal downtime?

  Hi all

  We want to improve our 10.2.0.4 RAC database for 11.2.0.3 linux linux RAC. We have two different servers, where one is the production server (10.2.0.4) and another is the 11.2.0.3 Server.

  Here, we want to minimize downtime of the production database.

  Our db size is close to 1 TB. If we turn to the traditional method of upgradation as given below, then it will take nearly 15 hours:

  1. take RMAN 10 g bkp.

  2. transfer to server 11 g.

  3. restore the db.

  4. set at the database level.

  I had two methods to minimize the downtime that arise as follows, but I'm not sure that these means are feasible or not...

  1st method:

  Our server of db source here is 10.2.0.4 and target db server is 11.2.0.3.

  1. create a DR on the target server. (10.2.0.4)

  -Here we have installed the software (stand-alone) db to 10.2.0.4 on the target server, but also some 11.2.0.3 rac linux.

  -All data of Dr. files will be filesystem (not on ASM).

  Synchronize the database of production with the Dominican Republic.

  2. break the DR and turn it on.

  3 close the db and move the datafiles of the DR to ASM storage (11.2.0.3)

  4. start PB with option upgrade and update.

  It will take nearly 5 hours.

  2nd method:

  -Install the software grid 11g and 10g and 11 g db Server db software target.

  -We set up DR as first method but the grid HERE home will be 11 g and db House will be 10 g.

  -Now we will synchronize the DR with data base of production.

  -to activate the 10g database (target server)

  -will restart the database 11g House and then we will modernize it.

  Here I want to know that is it possible to create a DR with the following configuration?

  Production DB is 10.2.0.4 and DR is configured with 11g grid and g 10 db House.

  Kindly give your entries...

  Kind regards

  Andy...!

  Hi Srini,

  Thanks for the reply.

  I have the following document for the upgradation to 11g with minimal downtime, and it seems good. We make this POC...

  Upgrade to transitional assistance rolling logical Standby database: Oracle DataGuard 11g.

  Thank you all for your suggestions.

  Kind regards

  Andy...!

• C2664 errors after the upgrade of client db 10g and 11g

  Hi, after upgrading customer db 10g and 11g, the compiler gave errors error C2664:
  
  /************************************************************
  AddCxrCh.cpp (2071): error C2664: 'sqlglm': cannot convert parameter 1 from 'char' [513] in ' unsigned char *'
  Types of art are not related. conversion requires reinterpret_cast, C style cast or function-style cast
  make: * [AddCxrCh.obj] error 2
  ************************************************************/
  
  The same code was compiled correctly when you use the db 10g client. I know that I can easily correct this error by changing the code, but there is more than a sqlglm used instructions. I'm looking for a way that will solve the problem by changing the settings of the compiler.
  
  Thank you

  Hello

  There is a change between 10g and 11g. It is described in "Oracle 11g Pro * C nsqlprep Sqlglm issues [ID 860382.1]". The document, you can find on Metalink, aka Oracle Support.

  Herald tiomela
  http://htendam.WordPress.com

• Upgrade the database to 8i and 9i and 10g and 11g

  Nice day
  
  Hi all
  
  Please can someone help me to get a good document for the upgrade of the database to upgrade the database to 8i and 9i and 10g and 11g include prerequisites and upgrade processes and after upgrading the process waiting for your response because it required required

  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14238/TOC.htm

  Concerning
  Asif Kabir

• The upgrade of 9,2.0.6 (HP - UX) to 10g or 11g on Redhat Linux?

  In general, what are the steps to pass 9,2.0.6 (HP - UX) to 10g or 11g on Redhat Linux?
  
  I can the database on 9.2.0.6 exp (HP - UX) then imp of the database to a new database of 10 / 11g (RedHat Linux)?
  
  It's the easiest way?

  Well Yes you can do it. You will be able to use transportable tablespaces for her. You can convert same rman.

• The upgrade from 10g to 11 GR 2

  Hello people:

  I run an instance of Oracle 10 g with Application Express 4.0.2.00.07.  I have 23 requests, which all of the custom images used throughout. 

  According to your experience, what is the best way to upgrade to 11 g 2 without having to rebuild all applications?  Is this possible?

  Thank you

  Aqua

  AquaNX4 wrote:

  I'll be upgrading on the same server, but what I understand is no 'upgrade' so to speak for 10g to 11 GR 2.  As I understand it, you have uninstall 10g and then install 11 GR 2.  Is this correct?  I'm not aware of all hotfix that upgrades 10g to 11 GR 2.

  This is my version of 10g:

  BANNER

  Oracle Database 10 g Express Edition Release 10.2.0.1.0 - product

  PL/SQL Release 10.2.0.1.0 - Production

  "CORE 10.2.0.1.0 Production."

  AMT for 32-bit Windows: Version 10.2.0.1.0 - Production

  NLSRTL Version 10.2.0.1.0 - Production

  Express Edition is different. That is why providing details of the environment at the front is so important: it avoids wasting time for everyone.

  To upgrade 10g to 11g XE XE, perform the installation of 11g according to the instructions in the section "importing and exporting data between 10.2 and 11.2 XE XE" Guide of Installation for Windows XE.

• The upgrade from 11g to 12 c

  Hello

  We intend to improve our databases of 11g (11.2.0.3.11) to 12 c (12.1.0.2). We would like to know what are the steps that we need to upgrade the position.

  (1) all 11 g AWs automatically updated to 12 c? or do we rebuild US 11g AWs on 12 c after the upgrade? (We had to rebuild AWs after upgrading to 10g and 11g)

  (2) are there accessories performance in 12 c, which will apply to only AWS built on top of the 12 c?

  (3) we have an AW 10 g 11 g-based. Is it still compatible with 12 c AW?

  Thank you

  Dietsch.

  Hi dietsch,

  My answers are online.

  (1) all 11 g AWs automatically updated to 12 c? or do we rebuild US 11g AWs on 12 c after the upgrade? (We had to rebuild AWs after upgrading to 10g and 11g)

  The upgrade from 11g to 12 c requires no AWs to rebuild.

  (2) are there accessories performance in 12 c, which will apply to only AWS built on top of the 12 c?

  He might have a few new optimizations that have been incorporated into the version of 12 c of the AW you will not have access to until you rebuild the AW, but that does not prevent you from using the 11g version of the AW of 12 c.

  (3) we have an AW 10 g 11 g-based. Is it still compatible with 12 c AW?

  Yes, 12 c is backward compatible with an AW 10 g.

  In addition, once you upgrade it has some new features that you can use for OLAP.  The display below describe some of them.

  OLAP roadmap

  Thank you

  Ken Chin

• Issue of upgrade of database (10g and 11g)

  Hello

  I currently have 2 versions of oracle installed on my server 10g and 11g

  (1) oracle Database 10 g Enterprise Edition Release 10.2.0.5.0

  With oracle-/oracle/app/oracle/product/10.2.0/db_1 House

  &

  (2) oracle Database 11 g Enterprise Edition Release 11.2.0.3.0

  With oracle home-/u01/app/oracle/product/11.2.0/dbhome_1

  Is it possible level Oracle database 10g Enterprise Edition Release 10.2.0.5.0 to Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 using the oracle same House for 11 g IE (/ u01/app/oracle/product/11.2.0/dbhome_1) the process of DBUA

  Would appreciate any help on this matter.

  Yes - pl see the Upgrade Guide - http://docs.oracle.com/cd/E11882_01/server.112/e23633/toc.htm

  You can skip the part of the doc where it plans to install 11 GR 2, since you already have installed binary files.

• Weblogic server integration is needed in Jdeveloper for BPEL of 10g and 11g upgrade?

  Hello

  Weblogic server integration is needed in Jdeveloper for BPEL of 10g and 11g upgrade?

  We migrated BPEL 10g and 11g. I understand that this integrated weblogic server is part of jdeveloper.

  Integration of weblogic server allows successful simulation of the weblogic Server real 11g which we installed as a separate product?

  or should we connect jdeveloper to weblogic server 11g instead of the integrated weblogic Server?

  Please notify.

  Thank you

  No, built-in weblogic server is not necessary in jdeveloper for bpel upgrade.

  If you are migrating bpel go separate domain and weblogic/managed servers, don't use integrated weblogic.

  Kind regards

  Anshul

• Upgrade to DB 10g and 11g

  Hi guys,.
  
  Current version: 10.2.0.5
  Target Version: 11.2.x.x
  
  I intend to improve my DB from 10g to 11g.
  Before the actual upgrade, I can create a test 11 g environment.
  
  I've read a few articles and understand the following concepts
  1 create a set of tuning in current 10 g to capture plan and the performance of the sql execution statistics
  2 export the setting of 10 g and 11 g SQL import base
  3 export all data to 10 g and 11 g
  4 to 11 g database, consider whether there is a best execution plan and accept
  
  For my scenario here, my test 11g environment is not all applications server conneecting to it.
  For my 11g generate other plans, the sql should be run at least once in 11g. As there could be a number of SQLs captured in the tuning set, how I run everything manually (via sql * more) because I did not have a request to call him?
  
  In fact, my main goal here is to compare the execution between 10g and 11g plan. Already from 9i and 10 g, I have actually generate version manually sql execution plan and compare manually.
  
  
  
  Thank you

  Have you thought about Oracle Real Application Testing - http://www.oracle.com/technetwork/database/focus-areas/manageability/rat-option-11gr2-datasheet-128580.pdf

  Lordane Iotzov