The upgrade of database 10g to 11g with minimal downtime?

Similar Questions

• Issue of upgrade of database (10g and 11g)

  Hello

  I currently have 2 versions of oracle installed on my server 10g and 11g

  (1) oracle Database 10 g Enterprise Edition Release 10.2.0.5.0

  With oracle-/oracle/app/oracle/product/10.2.0/db_1 House

  &

  (2) oracle Database 11 g Enterprise Edition Release 11.2.0.3.0

  With oracle home-/u01/app/oracle/product/11.2.0/dbhome_1

  Is it possible level Oracle database 10g Enterprise Edition Release 10.2.0.5.0 to Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 using the oracle same House for 11 g IE (/ u01/app/oracle/product/11.2.0/dbhome_1) the process of DBUA

  Would appreciate any help on this matter.

  Yes - pl see the Upgrade Guide - http://docs.oracle.com/cd/E11882_01/server.112/e23633/toc.htm

  You can skip the part of the doc where it plans to install 11 GR 2, since you already have installed binary files.

• The upgrade of XE 10g to 11g SE

  Hello world
  
  Could someone point me in the right direction to get instructions on how to change my 10g XE to 11g SE?
  
  Thank you!
  François

  As 10.2 XE means a very small database (i.e.< 4="" gb="" or="" so),="" consider="" using="">

  Use tools expdp (or exp) and do a 'full' export Then use impdp (or imp) to import schemas into the 'empty' SE 11.2 base / newly created.

  See the manual http://www.oracle.com/pls/db112/homepage, upgrade and utilities Guide.

  There may also be specific differences (e.g. version) Apex to answer to the.

• The upgrade of XE 10g to 11g XE... I must first upgrade Apex?

  I am currently on 10g Express and thinking about upgrading to the new 11g Express.
  
  Shooting Apex 3.2 in my 10g Express my application for production. I have to first upgrade Apex 4.1 until I update XE to 11g?
  
  Thank you!
  François

  Hello

  There is no need to upgrade the Apex. When you upgrade to 11G XE, your Apex is upgraded to version 4.
  After database upgrade, you can improve the Apex to the 4.1 version, if you wish.

  Kind regards
  Jari

• Impossible to upgrade the schedular schema from 10g to 11g

  Hello
  
  Im doing an upgrade of the schema S_NQ_SCHED from 10g to 11g, its failure to upgrade, while the review, he throws the error in the log below:
  
  
  [2012-03-16 T 12: 09:21.363 + 02:00] [BIPLATFORM] [ERROR] [update. BIPLATFORM] UPGCMP-05001: table 10 g S_NQ_SCHED. S_NQ_JOB. Oracle.IAS.mrua.plugin.BI.DBTable@6a493b65 does not use the default columns.   He can't be updated[2012-03 - 16 T 12: 09:21.363 + 02:00] [FrameworkMR] [ERROR] [UPGAST-01008] [update. FrameworkMR] review of the scheme has failed for Oracle's BI platform.
  [2012-03-16 T 12: 09:21.363 + 02:00] [FrameworkMR] [ERROR] [update. FrameworkMR] Cause: upgrade framework determined that the review of upgrade phase failed for the named component. This is often due to a the prerequisite check failed. No patterns changes have been made to the component that failed. Action: Check the log files upgrade for the cause of the message. Fix the source of the problem if possible and start the exam. Do not have to perform a real upgrade upgrade all components unless mode to succeed during the review.
  [2012-03-16 T 12: 09:21.363 + 02:00] [FrameworkMR] [NOTIFICATION] [update. Failure_total M_upgradeMode 1 FrameworkMR] N
  [2012-03-16 T 12: 09:21.363 + 02:00] [FrameworkMR] [NOTIFICATION] [update. Failure_total M_upgradeMode 1 FrameworkMR] N
  [2012-03-16 T 12: 09:21.363 + 02:00] [FrameworkMR] [ERROR] [UPGAST-01015] [update. Specific software components FrameworkMR modules] some update of the repository report the failure.
  [2012-03-16 T 12: 09:21.363 + 02:00] [FrameworkMR] [ERROR] [update. Cause FrameworkMR]: one or several modules specific to software components returned a status of error during upgrade from the repository. A few other components could be upgraded successfully. Action: Review upgrade logs to determine which components have failed and locate the source of the errors for each component. Correct the conditions that caused the errors. It may be possible to restart the upgrade.
  [2012-03-16 T 12: 09:21.379 + 02:00] (Framework) [NOTIFICATION] [update. Finishing frame] examination of the components.
  
  
  
  Kind regards
  KK

  KK,

  When we install OBIEE 11 g, we run a repository creation utility (RCU) creates two schema called schema of metadata (MDS) and BIPLATFORM.
  The planner of all associated tables were created in the BIPLATFORM schema.
  If Enterprise Manager (EM) takes these patterns automatically and executes BI 11 g Planner services.
  Connect with the BIPLATFORM schema in the data source. Here we can see the Scheduler tables S_NQ_JOB, S_NQ_INSTANCE, S_NQ_JOB_PARAM, S_NQ_ERR_MSG which are born already when we ran RCU related

  For more information,.

  http://allaboutobiee.blogspot.in/2012/03/creating-agent-in-OBIEE-11g.html

  Thank you
  Oldia...

• Upgrade to DB 10g and 11g

  Hi guys,.
  
  Current version: 10.2.0.5
  Target Version: 11.2.x.x
  
  I intend to improve my DB from 10g to 11g.
  Before the actual upgrade, I can create a test 11 g environment.
  
  I've read a few articles and understand the following concepts
  1 create a set of tuning in current 10 g to capture plan and the performance of the sql execution statistics
  2 export the setting of 10 g and 11 g SQL import base
  3 export all data to 10 g and 11 g
  4 to 11 g database, consider whether there is a best execution plan and accept
  
  For my scenario here, my test 11g environment is not all applications server conneecting to it.
  For my 11g generate other plans, the sql should be run at least once in 11g. As there could be a number of SQLs captured in the tuning set, how I run everything manually (via sql * more) because I did not have a request to call him?
  
  In fact, my main goal here is to compare the execution between 10g and 11g plan. Already from 9i and 10 g, I have actually generate version manually sql execution plan and compare manually.
  
  
  
  Thank you

  Have you thought about Oracle Real Application Testing - http://www.oracle.com/technetwork/database/focus-areas/manageability/rat-option-11gr2-datasheet-128580.pdf

  Lordane Iotzov

• Migration of database 10g and 11g

  Hi gurus,
  
  How can we migrate the database from gr 10, 2 to 11 GR 2 with rman.
  
  Thank you!

  PL see these Docs MOS

  The database upgrade Version online by using streams and RMAN [ID 782444.1]
  RMAN restore backups as part of an upgrade of database [ID 790559.1]

  The recommended method is to use such DBUA indicated in the link above

  HTH
  Srini

• After the upgrade to El Capitan having problems with the application Mail

  Hello:

  Recently upgraded my Mac mini to El Capitan. Before the upgrade (from Mountain Lion), I got Thunderbird mail application works perfectly access my GMail account and my Hotmail account. Now, I have no problem with Hotmail and Gmail keeps asking for the password to connect to the gmail imap server. I have TBird in my laptop Ubuntu Linux and Windows too and that you have not had any problems like that. Any help to solve this problem is appreciated. Thank you.

  Try this: https://support.google.com/accounts/troubleshooter/3178296?hl=en

• Extraction of the details of database 10g

  Hello
  
  Is there a script that extracts all the relevant details an instance of database 10g? The instance has been created by someone else.
  
  All references to URLS for web scripts will help
  
  Thank you

  Can you send me a link to the note?

  You can find it on http://metalink.oracle.com

  Its a note of support.

• The upgrade to openSUSE 12.3 VM with run_upgrader.sh

  Created an openSUSE 12.3 using WS 9.0.2 upgrade VM hardware without problem.

  I had already installed vmware-tools in 9.0.222 and in the upgrade (TP1) re-installed VMware-Tools.  There are 3 new orders of valuation.  chmod + x the vmware-tools - upgrader.sh and it ran. Then ran the following command.

  Marty@Linux-1oxf: / usr/bin > sudo. / vmware-toolbox-cmd - v

  9.2.2.18018 (build 893683)

  What is the correct version of vmware-toolbox-cmd to the TP?

  Hi mfelker,

  Could you try the General upgrade method in your comments and let me know the result? Thank you!

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&docTypeID=DT_KB_1_1&externalID=1018414

• Can't get the upgrade to Illustrator CS4 to work with Freehand.

  There is no option for the upgrade of everything except CS, CS2, CS3. Adobe Announces Illustrator CS4 can be upgraded from Freehand MX, 10, 9, but fail to offer an option to enter a number on the fly during installation.

  Is there a solution to this Adobe screw-up?

  On Amazon.com, search for "Adobe Illustrator CS4 Upsell from Freehand drawing".

  I don't know what is the exchange of Amazon policy. Maybe they'll let change you for the 'Upsell' version

  The Adobe Store site that sells the download of the upgrade version requires clearly as the buyer to "choose a version.

  

  If I were you I contact Adobe Customer Service and see what your options are. Here is their return policy.

  http://go.adobe.com/kb/cs_tn_15327_en-us".

• OWB 11 g r2 for the repository of database 10g for HP Itanium (Linux)

  Hello
  
  I need some information gurus...
  
  I have repository OWB 10 g r2 for my current project, now I want to use owb 11g r1 or r2 clinet s/w on the same owb 10g r2 repository, located on GNU / linux HP Itanium 64-bit.
  
  If so, you can u pls let me know all necessary measures or s/w required
  
  Thanks in advance

  You must upgrade your owb repository in the database of 10.2 11R1 or 11R2. The version of the client must be identical to the version of the repository. But you can update the repository and store in a database of 10.2.

• Document for the upgrade of database ebs spot

  
  Hello

  Can someone point out to me a document that gives the steps to out place upgrade database ebs 12.1.3 11.1.0 to 11.2.0.3? I tried it myself and it went well but I still don't know if something is still missing because there are still 346 invalid objects in the comic book. Here are the steps I followed:

  On the source:

  Start adpreclone

  2 run utlu112i.sql (copy it from the 11.2.0). House)

  Follow the recommendations of utlu112i.sql.

  Back up the db of the source and the apps folder

  Copy the backup on the target server.

  6 copy the pfile.

  7.

  On target:

  install the 11.2.0.3 software

  apply the required patches

  Restore and recover the database.

  catupgrd.sql run

  Start catuppst.sql;

  Start utlrp.sql;

               run d bupgdiag. SQL

  run adconfig.sh contextfile = < contextfile > level db.

  Stop listener and database and restart to load the new approx.

  restored apps folder (backup of the source)

               run adcfgclone.pl appsTier

  run autoconfig.

  Kind regards

  Vinod

  Hi Vinod,

  Please find some off-site links update:

  DATABASE UPGRADE 11.1.0.7 to 11.2.0.3 DATABASE WITH R12.1.3

  See also the forum as it's been discussed on several occasions.

  Have BTW, regarding your invalid objects you tried recompiling of the objects by using:

  1 adadmin > schema compilation apps

  2. connected in sysdba > run @$ORACLE_HOME/rdbms/admin/utlrp.sql

  Best regards

• Has anyone got the upgrade of GPU for H8-1234 with motherboard HP M3970AM HP (Angelica2)?

  I improved my diet for a Corsair CX series CX500M 500W ATX 80 Plus Bronze modular power supply 12V successfully and I want to assure you that I have buy a compatible GPU for the motherboard.

  If I go to http://www.pc-specs.com/mobo/HP/HP_M3970AM-HP (Angelica2) _ / 2042 and click on compatible GPU it lists AMD and Nvidia cards.

  The series of HD AMD goes up to the HD6000 series and does not list any HD 7000 series.

  The only Nvidia 600 series which is decent is the GeForce GTX-660-670-680 or 690.

  The site also shows (these graphics cards have an appropriate interface to work with and integrate into the HP M3970AM - (Angelica2). Because this motherboard does not have a GPU chip on board, we have also limited GPU integrated only to those which are integrated to die of a CPU.)

  Cards GTX listed are all much more expensive than 650 Ti DirectCU OC Boost 1085 MHZ 2 GHz 6.0 GB GDDR5 2xDVI card PCI-E HDMI DP that is not listed or even GTX550 TI, which is not listed

  The Amd HD listed series cards are unavailable or more expensive than most of the HD 7000 series.

  Has anyone successfully installed a card $ 100 from low to medium priced which is a significant improvement on the hd 7450? If you could please let me know what graphics card you purchaced.

  Thank you

  Gbrown13, welcome to the forum.

  The limiting factor for the video card upgrade is the power supply unit (PSU).  It is 300W.  Intermediate level maps latest require at least 400W to work properly.  7450 HD comes with the computer has been designed for HP operate with OEM PSU.  A detail 7450 HD very probably would not work.  In addition, you should limit the length of the video card to no more than 9 ".  This ensures that it fits in the space provided.  The majority of the double cards are 1.5 "wide.  These are normally without any problems.

  I hesitate to recommend a video card on the grounds that it will be much better than an existing map.  It is difficult to say that this is the case.  Here is a map which might work for you, with an upgrade of the power supply.  Read the reviews to see what users have to say about it.

  If your problem is solved, please click "accept as a Solution.

• GRAB THE COPY OF DATABASE OF ORACLE 11G FROM SOURCE TO DESTINATION

  Dear Experts,

  I just want to practice disaster to start database on the destination server by copying the files in data/files of the server source control.

  I use 2 clients (windows 7 Professional) as a source server and the destination server. Database is Oracle 11 g.

  I copied all the files from the source to the destination server server and created the directory according to the settings files. I restarted tnslistener on the destination server, but the database service is not registered with the listener.

  What I would do to a maximum of database on the destination server.

  Thanks in advance for instructions.

  Cecile

  VISHWAKARMAPARDEEP wrote:

  Dear Experts,

  I just want to practice disaster to start database on the destination server by copying the files in data/files of the server source control.

  I use 2 clients (windows 7 Professional) as a source server and the destination server. Database is Oracle 11 g.

  I copied all the files from the source to the destination server server and created the directory according to the settings files. I restarted tnslistener on the destination server, but the database service is not registered with the listener.

  What I would do to a maximum of database on the destination server.

  Thanks in advance for instructions.

  Cecile

  Since it's Windblows, you will need a Windows service for the instance database.  I do not see in your list of steps that you created a.  Google "oradim.