The use of Port profiles

Similar Questions

• U2515H, the issue of the use of Port

  Hello

  I had a Dell U2515H, now the thing is that I wanted to update my graphics card bios, which is the gigabyte g1 games GTX 970, in order to update the video card they requires the use of two DVI - D DVI - I cable. The question I have is that I would be able to use DVI - D and DVI - I HDMI to the Dell U2515H?

  Help, please!

  Thank you.

  I'm confused. There is no way Garland DVI - D to DVI - I to a single HDMI port on the monitor? IF that's what you think.

  DVI - D video card on--> DVI - D to HDMI Cable--> U2515H HDMI # 1 (will work. No idea what the resolution is taken in charge)

  Video card DVI - I--> DVI - I to HDMI--> U2515H # 2 HDMI cable (will work. No idea what the resolution is taken in charge)

  You should contact Gigabyte before continuing.

• Wat is the use of ports, that those who are used to EMconsole

  Hi all,.
  
  Could someone tell me please
  1. the use of the ports used for the dbconsole officer, rmi and jms?
  2. If I block these ports can I use dbconsole?
  3. What are all the ports used for the database as listener http dbconsole, dbconsole agent etc, and use of these.
  
  Thank you and best regards,
  Sagar Maram

  You need to read the docs she...

  JMS?

  Here you go

  http://download.Oracle.com/docs/CD/B14099_19/Web.1012/b14012/JMS.htm

  RMI?

  http://download.Oracle.com/docs/CD/B14099_19/Web.1012/b14012/ormi.htm#JISVC611

• The use of ports Combo SG-300 for the loopback test

  Hello

  I have a switch SG300 - 10 p and tries to use it to create a test environment for a Fiber Test set. I want to do is get two hosts, & Abbots, plugged into ports 1 and 3 on the switch, to talk to each other, but forcing traffic routing via two ports Combo 9 & 10. Please see the attached diagram.

  I tried to configure two VLANS, 10 and 20. VLAN 10 is used for traffic between Ports 1 and 9, Vlan 20 is used for traffic between Ports 3 and 10.

  I really don't like if traffic is marked or not identified as it passes between 9 and 10 ports.

  I tried different combinations of ports tag/no identified, PVID, etc.. As a first test, I bypassed the fiber test established and simply created a connection between ports 9 and 10.  I can't get the traffic from host A to host B to get routed through ports 9 and 10 (I ping each host in the other and does not).

  Any ideas for how to achieve?

  Thank you

  Maurice Lampell

  Hi Maurice.

  I suggest to make sure you are in the current version of the firmware 1.1.1.8.

  The current version of the firmware has a CLI supported.

  This CLI running configuration is reflected in the GUI and on the other hand, the changes made to the GUI are reflected immediately in the CLI.

  Please see the administration guide on how to update the firmware.

  Best regards, Dave

• Remove the ' system VLAN "Nexus 1000V port-profile

  We have a Dell M1000e blade chassis with a number of Server Blade M605 ESXi 5.0 using the Nexus 1000V for networking.  We use 10 G Ethernet fabric B and C, for a total of 4 10 cards per server.  We do not use the NIC 1 G on A fabric.  We currently use a NIC of B and C fabrics for the traffic of the virtual machine and the other card NETWORK in each fabric for traffic management/vMotion/iSCSI VM.  We currently use iSCSI EqualLogic PS6010 arrays and have two configuration of port-groups with iSCSI connections (a physical NIC vmnic3 and a vmnic5 of NIC physical).

  We have added a unified EMC VNX 5300 table at our facility and we have configured three VLANs extra on our network - two for iSCSI and other for NFS configuration.  We've added added vEthernet port-profiles for the VLAN of new three, but when we added the new vmk # ports on some of the ESXi servers, they couldn't ping anything.   We got a deal of TAC with Cisco and it was determined that only a single port group with iSCSI connections can be bound to a physical uplink both.

  We decided that we would temporarily add the VLAN again to the list of VLANS allowed on the ports of trunk of physical switch currently only used for the traffic of the VM. We need to delete the new VLAN port ethernet-profile current but facing a problem.

  The Nexus 1000V current profile port that must be changed is:

  The DenverMgmtSanUplinks type ethernet port profile

  VMware-port group

  switchport mode trunk

  switchport trunk allowed vlan 2308-2306, 2311-2315

  passive auto channel-group mode

  no downtime

  System vlan 2308-2306, 2311-2315

  MGMT RISING SAN description

  enabled state

  We must remove the list ' system vlan "vlan 2313-2315 in order to remove them from the list" trunk switchport allowed vlan.

  However, when we try to do, we get an error about the port-profile is currently in use:

  vsm21a # conf t

  Enter configuration commands, one per line.  End with CNTL/Z.

  vsm21a (config) #-port ethernet type DenverMgmtSanUplinks profile

  vsm21a(config-port-Prof) # system vlan 2308-2306, 2311-2312

  ERROR: Cannot delete system VLAN, port-profile in use by Po2 interface

  We have 6 ESXi servers connected to this Nexus 1000V.  Originally they were MEC 3-8 but apparently when we made an update of the firmware, they had re - VEM 9-14 and the old 6 VEM and associates of the Channel ports, are orphans.

  By example, if we look at the port-channel 2 more in detail, we see orphans 3 VEM-related sound and it has no ports associated with it:

  Sho vsm21a(config-port-Prof) # run int port-channel 2

  ! Command: show running-config interface port-canal2

  ! Time: Thu Apr 26 18:59:06 2013

  version 4.2 (1) SV2 (1.1)

  interface port-canal2

  inherit port-profile DenverMgmtSanUplinks

  MEC 3

  vsm21a(config-port-Prof) # sho int port-channel 2

  port-canal2 is stopped (no operational member)

  Material: Port Channel, address: 0000.0000.0000 (bia 0000.0000.0000)

  MTU 1500 bytes, BW 100000 Kbit, DLY 10 usec,

  reliability 255/255, txload 1/255, rxload 1/255

  Encapsulation ARPA

  Port mode is trunk

  Auto-duplex, 10 Gb/s

  Lighthouse is off

  Input stream control is turned off, output flow control is disabled

  Switchport monitor is off

  Members in this channel: Eth3/4, Eth3/6

  Final cleaning of "show interface" counters never

  102 interface resets

  We can probably remove the port-channel 2, but assumed that the error message on the port-profile in use is cascading on the other channel ports.  We can delete the other port-channel 4,6,8,10 orphans and 12 as they are associated with the orphan VEM, but we expect wil then also get errors on the channels of port 13,15,17,19,21 and 23 who are associated with the MEC assets.

  We are looking to see if there is an easy way to fix this on the MSM, or if we need to break one of the rising physical on each server, connect to a vSS or vDS and migrate all off us so the Nexus 1000V vmkernel ports can clean number VLAN.

  You will not be able to remove the VLAN from the system until nothing by using this port-profile. We are very protective of any vlan that is designated on the system command line vlan.

  You must clean the canals of old port and the old MEC. You can safely do 'no port-channel int' and "no vem" on devices which are no longer used.

  What you can do is to create a new port to link rising profile with the settings you want. Then invert the interfaces in the new port-profile. It is generally easier to create a new one then to attempt to clean and the old port-profile with control panel vlan.

  I would like to make the following steps.

  Create a new port-profile with the settings you want to

  Put the host in if possible maintenance mode

  Pick a network of former N1Kv eth port-profile card

  Add the network adapter in the new N1Kv eth port-profile

  Pull on the second NIC on the old port-profile of eth

  Add the second network card in the new port-profile

  You will get some duplicated packages, error messages, but it should work.

  The other option is to remove the N1Kv host and add it by using the new profile port eth.

  Another option is to leave it. Unless it's really bother you no VMs will be able to use these ports-profile unless you create a port veth profile on this VLAN.

  Louis

• How to check the use of the channels of port on fabric of interconnection?

  Hi all

  Is there a mechanism to view and export the use of ports or port channel fabric Interconnect 6248.

  I need to export for the last 15 days. Is there a command or options in the GUI I can export it

  Greetings.

  Native statistics are unlikely to give you a historical trend for the period you're looking for.  See the monitoring/stats for the UCSM system section for more information on the rules of collection of statistics.  The default value for the period appears to be 2 hrs to watch statistics table.

  You can look something like manage performance UCSr, which can do a trend and will retain much historical perspective of production like detailed.

  For a short term in UCSM view, click the LAN tab, then a given port channel, in the right pane statistics, chart and "configure chart" to add in the box counters as "total number of bytes.

  Thank you

  Kirk...

• Monitoring the use of telepresence MCU ports

  Hi people,

  I have a MCU4501 with 12-port HD. I wonder what a way to monitor the use of ports?

  Thank you

  Chenzhe

  See this thread: mcu-5320-port-use-report

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• UCSM VM - FEX create when port-profile name cannot be used. (dot)

  UCSM q with 6120XP 2.01

  I can create using port-profile. (dot) for example "VLAN30 - 192.168.1", but it causes a warning message (pictured below)

  so I try to change the name of VLAN30-192-168-1 it can work very well

  My question is can I use. (point) in my profile of the port name?

  PS. I checked the manual of cisco

  This name can be between 1 and 31 ASCII alphanumeric. You can not

  Use spaces or other special characters as - (dash) _

  (underscore character). (period), and: (colon), and you cannot change this name

  Once the object has been saved.

  Thank you

  We have logged a bug for this CSCtw50228 - thanks to Yasmin!

  Our developers have confirmed that while other objects have name validation, virtual computer Port profiles are not, who raises the error you see because NXOS cannot process ".» (periods).  The names of service profiles are another matter that NXOS has no knowledge of these objects.

  The solution is to avoid using periods in the VM profile names.  Use a dashboard.

  Kind regards

  Robert

• iOS 10.0.1 "not allowed to use the restricted network port.

  I just upgraded my iPad Mini iOS 10.0.1. He is now running Safari 10. I tried to visit an internal/private IP on port 4190 using HTTP. I get an error that says:

  Safari cannot open the page.

  The error was: "not allowed to use the restricted network port.

  On iOS 9.3 using Safari 9, the same URL opens fine without this error.

  Do not know what has changed since iOS to iOS 10.0.1, 9.3 but I'm unable to visit a web site that I have visited before.

  I know that WebKit maintains a list of ports that you cannot go (e.g. 6666), 4190 is not a restricted port AFAIK. I don't know why I get this error message.

  It seems I was looking at the wrong source code.

  I finally got a clue where to look after visiting the page Web Safari Technology Preview 13.

  https://trac.WebKit.org/browser/releases/Apple/Safari%20Technology%20Preview%201 3/WebCore/platform/URL.cpp

  It seems port got 4190 recently added to the list of blockedPortList

  2306	2049, / / NFS
  220V	3659, / / apple-sasl / PasswordServer [addition of Apple]
  2308	4045, / / lockd
  2309	4190, / / ManageSieve [Apple adding]
  2310	6000, / / X 11
  2311	6665, / / alternate IRC [addition of Apple]
  2312	6666, / / alternate IRC [addition of Apple]
  2313	6667, / / standard IRC [addition of Apple]
  2314	6668, / / alternate IRC [addition of Apple]
  2315	6669, / / alternate IRC [addition of Apple]
  2316	invalidPortNumber, / / used to block all the invalid port numbers
  2317	};
  2318	const unsigned short * const blockedPortListEnd = blockedPortList + * _ARRAY_LENGTH (blockedPortList);

• Using the second ethernet port to connect to the printer?

  Hi I have a Mac Pro 2.1 old school and I'm wondering if I can connect to the network with an ethernet port and connect the latter to a printer?

  If so, how?

  Yosemite running.

  Thank you

  Physically, you use a port and a cable to connect to your network and use the second port and a second cable to connect directly to the printer. The printer must obviously have an interface Ethernet himself.

  However, you need to configure the second port on the Mac and the Ethernet port on the printer for each manually configured the TCP/IP addresses and these should be in a range of different network to your main network.

  If you the main network is something like 192.168.1.1 then your printer and the port on the Mac connection to this need to be in another network, such as 192.168.11.1.

  In theory, if the printer supports Hello aka. mDNS, then maybe you can get away with not having to configure TCP/IP addresses for the connection.

  The main reasons to use a second separate connection as this would be the performance or security, and frankly I don't think that's really relevant here. This would mean that no other computers on your network will be able to access the printer.

• [waterfox] Using a default profile. No reset button in the troubleshooting information page.

  QUESTION:

  Having a thousand bookmarks affect performance of firefox?

  An add-on would prevent the reset button to appear? (tried to disable (blocking, not the addon) probably guilty, edge of adblock, nothing) safe mode seems to 'disable' the page of troubleshooting for some reason any so couldn't really use that to test.

  I would have posted these but downstairs I noticed side issues tend to be ignored. or at least the way I say them gets ignored them, so here they are.

  As the title says.

  I use only one profile is the default (and not only her name, she is also defined as default value according to the profile.ini).

  According

  http://KB.mozillazine.org/Troubleshooting_Information_page#Reset_Firefox_to_its_default_state

  The only factor would prevent her to appear if I do not use the default profile, which is what I currently have, and it's the only profile I.

  So... what could be preventing it from appearing?

  I'm not on Windows and I am not familiar on what support Waterfox feature and what has been deleted, so you can be better contact Waterfox for support on the problems with the program.

  Of course, you can always use the Profile Manager and create a new profile if that's your only intention and manually copy files to the new profile folder.

  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Can I use the s - vhs port to send video to television on Satellite A100-338

  Can I use the s - vhs port to send video to my TV? I have a good s - vhs cable to SCART. However, I can't set up the laptop to use the port s - vhs. The driver intel graphics media accelerator thingy does not allow me to add tv as another device, because it's not reccognise as a screen.

  It's a Toshiba 21 '' bog standard CRT. Widescreen even not. I want to be able to use the media library.

  Hello Peter

  Of course, you can use this port. This port is there exactly for this purpose. Make sure to use right high quality cable and connect it properly on your TV. I use the same port on my Tecra. I also use adapter SCART like this one http://videoclub.tiscali.co.uk/img/scart_adaptor.gif and it works perfectly. Make sure you use the right settings on your TV.

• How can we change the TCP/IP ports used by LabView?

  I'm under LabView 8.2 on a computer running windows XP sp2.  This computer is connected to a compact RIO via Ethernet.  The system works very well, but now I am trying to add an IP intercom function (acoustic digital ii3) this intercom uses a program called talkMaster to communicate with the host computer.  I can't communicate with the intercom because this program needs of ports 3000,3002,5000 and 5006.   I used a program called Currports to see what ports are used, and a program called lkcitdl.exe (National Instruments Logos product name) uses port 5000.  Is there a way to change this? I contacted digital sound technical support and they said there is no way to change it at their end.

  Any help would be greatly appreciated!

  Thank you

  Jason

  I believe that we have an article on this somewhere, but I don't have a link at the moment. Under Windows, you can set the port range used by the protocols of Logos in the registry. Reach

  HKLM\Software\National Instruments\Logos\Ports

  You will find two values DWORD here, FirstClientPort, and FirstServerPort, which defaults to 5000 and 6000 respectively. Logos will search for the first available port in the range [FirstClientPort, FirstClientPort + 1000] or [FirstServerPort, FirstServerPort + 1000] when starts a server or a client. By adjusting the registry, you should be able to find a port range that does not conflict with your software. You need to restart all programs OR after you make this change (probably easier to simply restart the computer).

  -J.D. Robertson

  National Instruments

• once disconnected when I try to log on to my computer using a temporary profile, this has started to happen since the time change, can someone help me

  The night of time change my backup computer shutdown and using a temporary profile once I disconnected. I can still see my pic and music Exchange reacently file but I want to turn my computer off when you are not using it and record what I saved on the computer the last time.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/947242/en-us

  It will be useful.

• I've lost 'use' of the USB 2 ports - why? Vista servicepak2

  I lost Adaptec USB (although it said it was working properly but he had the top yellow exclamation on device mgr /)
  The other is higher and I "m not sure what brand, etc.  I can't use the 4 USB ports.   Any ideas?  I have a Compaq Presario and all the stuff came with it...   I uninstalled both of them thinking they would reinstall when I rebooted, but not this time...   Help?

  Hello

  ·         Were there any changes made to your computer before this problem?

  Run the troubleshooter of hardware and devices at the following link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices