I've lost 'use' of the USB 2 ports - why? Vista servicepak2

Similar Questions

• Lost use of the fn on my satellite C660 - 10H

  I think I exaggerated my storage and deleted a program/driver too. As a result, I lost the use of the FN key. Can someone tell me what (s) I need to re - install? My laptop is a Satellite C660 - 10H.

  Hello

  the FN keys require value added Package and Flash Cards Support utility. These two tools can be downloaded from the official website of Toshiba:http://eu.computers.toshiba-europe.com/ > support & downloads > download DriversInstall value-added package in first, then the Flash Cards Support utility.
  After the installation of these two tools the FN keys will work as usual.

  Please, an update on the progress made.
  Greetz Duveltje

• Use of the USB to Ethernet adapter to find cRIO Systems

  Hi all

  I'm trying to connect to one OR cRIO-9066 to my laptop using USB-to-Ethernet adapter.  But I have a problem with it; Find VI systems shows no results unlike the direct connection via the ethernet port on the laptop.  I wish that the connection of the USB-to-Ethernet adapter to support this feature as well.  I would like to know if somebody did, and I hope a solution to this.

  Here's my setup. I bought the adapter USB-to-Ethernet of RadioShack. I connect the adapter to a USB port on my laptop. The adapter is the female Ethernet port on the other end. I directly connect cRIO and the adapter using a crossover ethernet cable. What is of note is that ethernet connection works.  I can specify the IP address of the cRIO then I can communicate with crio in the same configuration. However, finding systems VI cannot find any system.  LabVIEW 2015, is what I use.

  Instead of using the adapter, if I use a direct connection via the ethernet port on the laptop, find systems VI works fine.

  Any help or suggestion is appreciated.

  Thank you in advance.

  After all, my conclusion to this problem has been the model of Ethernet USB card I was using was not good.

  Gigaware USB to adapter Ethernet (from Radio Shack) was working not with find systems VI on my environment even though it is still able to connect to CRIO if I know the IP address. I even had the other, but the result was the same.  The solution for me was to use another model of the BADGE, which is NS-PU98505. It is cheaper, but has worked with find systems VI.

  I don't know what's behind the different behaviour, but the issue is resolved on my end for now.

  Thank you all for all the tips and ideas. Congratulations to all!

• How old, a driver can be used with the USB-GPIB controller?

  Hello, I have a litter of Nicolet who I'm trying to control using an NI USB-GPIB controller and a Nicolet provided the program. The software were made in 1995 and told me it was made to work with the NI AT-gpib cards and I would need to use a pilot more OLD, BUT I don't have access to one of these cards for a purchased a USB-GPIB, hoping that it would work. A pilot more FORMER will support the GPIB-USB?

  Sorry for you, but not

  This is a really old software and works only on the driver to the gpib.

  Written in LabVIEW software would go from before this date.

• Use of the USB in Windows 95

  I have the Windows 95 b, which came on a new gateway computer, way back when. I have two USB ports on the back. When I plug a flash drive, the computer is not see it. But when I boot with the flash drive is plugged in, I get an error message from player B. It's a 16G flash drive that I use. According to the BIOS page it is equipted to handle the plug-and-play devices on the USB ports. Activation of plug-and-play option to WOOD makes no difference, of course, flash drives weren't around then. Is a flash compatible memory drive, or not with that?

  It's a flash fat 32 drive. I think I have this problem to be solved.  I had this same problem with another computer, given that I made this post. In upgrading to a newer operating system, the computer immediately recognized the flash drives. Who told me that it was a software problem. The necessary driver was not included in the package of Win 95, was not then in use flash drives.

• File Manager XP assigns a letter already in use when the USB flash drive is connected.

  On a Lenovo S10E with XP Version 5.1 (Build 2600.xpsp_sp3_gdr. 090804-1435: Service Pack 3) I have three virtual disks assigned to the files on the C drive.  3 drive letters are D, E & F.  When I plug a USB key, it appears in the file Mgr as 'removable disk (d)', but when you open it you get the file I originally assigned to D.  When you remove the USB key, Mgr of files will no longer display a drive D, but the initial allocation of virtual drive is still active and functional.

  If I plug in a USB CD/DVD drive instead of the flash player, it is correctly attributed the letter G.

  In comparison, on an IBM Thinkpad Z61t, with similar virtual drives defined, when the USB is connected it is assigned letter H (after the edge G CD/DVD drive).  The Z61t IBM has the same level of Windows XP is installed.

  On a Lenovo with Vista 6.0 T500 Thinkpad, the USB is also properly assigned, after all virtual disks.

  But I think I installed all available updates, I wonder if there is a fix or an upgrade for the Lenovo Netbook is going to fix this problem?

  With the USB drive connected, run Disk Management (start > run > diskmgmt.msc), click on the drive and change its drive letter.

• How a detector of fuel level on the USB/serial port to indicate the level of the interface?

  Hello!
  Im working on a project that contains a fuel level (capacitive sensor) sensor. My task is to connect the sensor to a PC and indicate the level of fuel on a chart. The instrument works with 1-wire communication, but Ive built a USB converter for it. So I want to plug it into the USB port on the computer and use Labview to access the fuel level. Its important, I need indicate level constantly, because the probe will build in a bus to see his level of fuel. I've never used instrument in LV control, that is why now wrote im.

  Please can someone help me build a VI to do this?

  Thank you very much
  Regarding.

  G. masseteau

  
  

• I lost memory to the usb flash drive space, help me please.

  I formatted 2 gb usb flash drive, and now he has 247 MB of available space.
  in computer SCIENCE, I chose flash drive (E), then right-click on it and choose FORMAT.

  Hello

  1. What is the number of brand and model of the flash player?

  I suggest you plug the flash drive on another computer running on Windows 7 and check if the problem persists.

  You can try to format the drive falash using MS DOS and cehck if that helps.

  (a) click on the start menu

  (b) prompt to type in the start search bar (run as administrator command prompt)

  (c) type "format [drive letter]:" at the command prompt, replace "[drive letter]" by the letter of the drive you want to format.

  (d) then press the Enter"" key. Note that the drive letter must be followed by a colon - for example: "format c:".

  (e) support on 'Y' If you are prompted to confirm if you want to erase everything on the hard drive. Confirm that you want to continue. MS-DOS will start to reformat your hard disk and all data

  on the disc is erased.

  If the problem occurs on another computer as well, then the issue may be with the flash drive corrupted, in this case, you can get in touch with the manufacturer for assistance.

• I have 3 computer Aspire 5600U who noted starting with a USB 3 device plugged into the USB 3 port

  He did not become a problem with constant updates of Microsoft for Windos 10 check daily all 3 computers to see if the device USB 3 must be disconnected before the reboot may end.

  last 10 Microsoft Windows Upgrade installed yesterday and now, the problem seems to have resolved itself.

• Use of the high memory in Windows Vista

  I have a PC laptop Vista with 1 GB of RAM (I know I should get more!) that runs very slowly.

  The problem seems to be that the History graph to use physical memory in Task Manager shows continually near maxed out - usually 90% or more.

  No a process indicates an abnormally high consumption (SVCHost is the highest in 40 000 K with "show processes from all users' selected).

  I defragmented and run several scans of antimalware (analyzers Microsoft, Spybot, Malwarebytes, Superantispyware, etc.) and everything is displayed 100% clean.

  I've disabled Aero, transparency, the sidebar and disabled the services as Windows Search, Superfetch, Readyboost, and with little effect.

  I have run MSConfig and booted the system with everything off, and while the memory usage is a little lower, it is still very high.

  It's the analysis of PCPitstop which was done WITHOUT running programs other than Internet Explorer 7: "this system had a total memory load of 82% during the tests. This often indicates that more programs were running that could be managed by the RAM installed. »

  Here are the typical numbers in the Task Manager!

  (MB) physical

  Total 893

  452 cached

  Free 0

  (Mo) of core memory

  Total 240

  Paginated 188

  Paged 52

  System

  Handles 19405

  Threads 821

  Process of 72

  Page 1024M file / 2915M

  Physical memory 94%

  11% CPU utilization

  Here are the specs:

  Internet EXPLORER 7.0 browser

  System operating system Windows Vista Home Premium SP2

  Description of processor AMD Turion 64 X 2 Mobile Technology TL-60

  Number of processors 2

  Processor clock speed 2000 Mhz

  Description of the graph ATI Radeon X 1200 series

  Configuration of the memory 512 + 512; Unknown DIMM synchronous

  I would be very grateful for your suggestions!

  DG

  Darryl Gittins

  Vista is a memory hog. As you noted, you don't have enough RAM and he's never going to run smoothly with only 1 GB. Increase of at least 2 GB. You can also run the free process monitor utility to see what is eating your processor cycles.

  http://www.Microsoft.com/technet/sysinternals/default.mspx

  MS - MVP - Elephant Boy computers - don't panic!

• How to check the use of the channels of port on fabric of interconnection?

  Hi all

  Is there a mechanism to view and export the use of ports or port channel fabric Interconnect 6248.

  I need to export for the last 15 days. Is there a command or options in the GUI I can export it

  Greetings.

  Native statistics are unlikely to give you a historical trend for the period you're looking for.  See the monitoring/stats for the UCSM system section for more information on the rules of collection of statistics.  The default value for the period appears to be 2 hrs to watch statistics table.

  You can look something like manage performance UCSr, which can do a trend and will retain much historical perspective of production like detailed.

  For a short term in UCSM view, click the LAN tab, then a given port channel, in the right pane statistics, chart and "configure chart" to add in the box counters as "total number of bytes.

  Thank you

  Kirk...

• How many computers Windows 7 Home premium can be installed on the use of the updated version (we have Vista Home premium) thank you

  no further details to add thank you

  This is the Forum for Windows Update .

  http://store.Microsoft.com/Microsoft/Windows-7-Home-Premium-Upgrade-Family-Pack/product/87DFFF11

  If you buy now Microsoft has a special Upgrade to Windows 7 Home Premium(Windows 7 Home Premium Upgrade Family Pack).
  Details at the link above.

  For any other issue of Windows 7, here is a link to a list of the Windows 7 Forums:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 forum for questions on windows 7.

  Windows 7 questions should be directed to the it.

  See you soon.

  Mick Murphy - Microsoft partner

• Need to identify the designation of port COM through BACK...

  I'm editting a program that sends and receives information to a device via a USB - serial adapter. Previously, the program has been run only on one pc which always use the same COM port when the device is connected. Scripts used with this program have been written to always specify this port. After having taken the device and connected to another pc, the pc allocates another COM port - this is a relatively easy task for me to go through the device management and identify the appropriate COM port, modify the script and get the device communicates with the pc. HOWEVER, in the future, communication must be maintained between the device and a laptop with any user.

  The program you are using may open a windows command prompt and run DOS commands. If possible, I would like to help you find a way to use BACK to identify the COM port used by the USB adapter so I can assign this port number for a variable to be used in scripts, creating their infallible to any user.

  Thanks for your time,

  Chris

  Hello

  To improve assistance to this subject, you can ask your question in the MSDN forums.

  http://social.msdn.Microsoft.com/forums/en-us/categories

• lost to microsoft wireless optical mouse usb connector - is it possible to continue using the mouse without the USB?

  I lost the usb connector for my 2000 microsoft wireless optical mouse for my laptop to recognize it.  Y at - it a download for my wireless laptop, so I can still use this mouse or is it still possible without the USB?

  Hi TA68.

  ·         Are you referring to transmitter/receiver for the wireless mouse?

  If so, you won't might be able to use the mouse, unless you have the device. See the following article for more information.

  How to replace hardware or lost, broken, or missing Microsoft software

• A key using self-powered USB causes the base station go "off-line".

  I found that by using a USB drive self-powered, as the WD My Passport, without a USB powered, hub attached to the base of the station USB port has caused the base station go "off-line". In fact, using a powered hub does not always remedy the situation, but it is more reproducible without one.

  This is true for the AirPort Extreme and Time Capsule 802.11ac. The problem does not occur immediately, but it may happen over several days. The symptom is that the player is no longer lies in the Finder, or the base station appears in AirPort Utility.

  My question is if others have had the same results? ... and did you find permanent solutions?

  

  USB key "seems" less reliable on the airports of AC model than on previous versions.

  I tend to not use USB attached to routers because I think it's convenient mediocre and poor speeds. But I tested with previous models, and it seems ok...

  KT those a few posts here a me trial there. These are not self powered readers... who I have long recommended people avoid the use (without a powered hub)...

  Re: External backup drive down regularly

  In fact, the wire is different from what I remember... Age don't you know.

  But I did the test on an AC TC. The result has been very reliable. He did not cause the TC to close... but I lost the connection of the USB almost every day... except for a trial where I kept the USB drive mounted in the Finder... so that the USB drive wouldn't turn it down. He then worked for a few weeks... until what the noise of rotation of disk (sitting next to me) drove me crazy... as soon as he was mounted is more, he would pass the same existence as before.

  The previous model TC was barely big enough for the internal use of the power supply units. So powered car running disc was impossible.

  Provide EI (GEN 1-5) at 1. 8A and 12v was adequate, but the standard USB port is estimated at 500 my wrong to manage disks free power.

  You would certainly think AC 12v 5A power supply models would have a lot of power. Yet, power problems are a major problem still. Supply is extremely sensitive and stop easily for reasons I'm still to understand.

  Where the long threads on power issues to the AE.

  Now, I'm going to speculate... I think that SOME problems are associated with power.

  What is the USB port side in airports of AC? Is it still 500ma? Apple never seem to give easy to find info on these details.

  Do you know? I haven't measured it, but I can try timing the time it takes to charge a phone.  Assuming that it will immediately trigger.

  Then he will have problems with a self-powered drive. Even if the drive has less energy than quotes, current during starting is much higher. The restriction of the power on the USB port is managed by a self regulator recovery... Once you triggered it, you must stop the power... then reboot the machine to restore power.

  Then, I also did the test with hub powered... and like your results... It was better. Longer time between the drive disappears from the network. But it was not enough to stop it.

  There is another interesting effect using self-powered hubs... I discovered this on a computer running Mac OS lets say! The computer would not start with a powered hub connected to the front USB. Hubs self-powered cheap, showing a defect in their design. They can refer to the USB port. In this computer, it was enough to stumble on the good power circuit and prevent the supply, commissioning... As long as the computer is running, everything was fine... but if I turned off it would not start. I finally woke up I had to exit the USB every time. At one point, I made a "special" Cup USB cable 5v line so the hub can stay connected. You can probably just to isolate the 5v of contact in the USB. Regardless of the configuration of power USB in the AE or TC is as you can assume she's sensitive enough... and at any time when the 5V on USB hub exceeds the 5V in AE it could trigger.

  The symptom is that the player is no longer lies in the Finder, or the base station appears in AirPort Utility.

  Endangered of AU base station is not uncommon.

  It responds to the pings? I guess he still has lights but is he blocked? You still get internet through it?

  Try to open it manually in to THE... use of the file / configure from others and put the IP address of EI.

  Talk with me by e-mail... It is open in the profile.