The use of StudioCLI to import EGGS/OVF in VMware Studio

Similar Questions

• Error importing EGGS/OVF exported from the same 5.1 ESXi

  Hello to the entire community.

  I have a big problem with our ESXi 5.1 (it was a put 5.0 to update a few weeks ago) server:

  When I export a machine and I am trying to import it to the ESXi even, stop before import process starts with the following error:

  Impossible to deploy, the task was canceled by a user.

  Of course, I didn t cancel whatever it is.

  I have attached the log file on the deployment failed.

  Thank you very much!

  IDE1:0. FileName = ' / vmfs/volumes/5020e344-d3d12c0c-435f-6805ca00671e/FreePBX-1.1009.210.62-x86_64-Full-1350438464.iso '.

  try without a configured iso file

• Using VMWare Studio 2.6.0 to manage virtual machines on a host ESXi 4.1.0

  Hi all

  I'm having a problem connecting to our 4.1.0 ESXi host using VMWare Studio 2.6.0 (and it is quite possible that the problem is that I'm badly understand what VMWare Studio is supposed to provide). What I would do is create/configure/manage the virtual machines on our ESXi server from within Eclipse, similar to what I can do with vSphere client. However, when I open the Explorer of VMware Studio and try to set up the connection, I still get the error message "Connection to xxx.xxx.xxx failed. Difficulty of connection settings and try again or cancel. "I use the default port of 5480 number and the same references that I use in the vSphere client.

  So, my questions are: I use the incorrect port number? I am using a configuration that is known not only not for work (ESXi 4.1.0 + VMWare Studio 2.6.0)? Or am I completely misunderstanding what VMWare Studio and is not?

  Please specify!

  I think you misunderstand what did the Studio. It's simply a VM construction kit. Once created, the OVF Studio is out of the picture. He does, eventually, put some components in the virtual machine to manage addresses network, proxies, updates, etc. but above all, he was only VMs.

  The Eclipse of Studio plugin is simply another user interface in the Studio build system and will work only if it points to a Studio running. It will not serve the goal of the vSphere client.

• How can I keep IE and FireFox Favorites in local sync to my PC only, without the use of an external server or import/export?

  FireFox Sync is not an option, because the use of an external server is not allowed.
  Use of third-party modules is not really an option.
  Import/export is inefficient because it is not put them in the same exact place in every browser.

  I am happy to be able to use the same favorites/bookmarks file if it is an option.

  Thank you

  You do not have.

  Sorry, IE and Firefox use different methods of storage Favorites / Bookmarks to data that are not compatible with the other program.

• I am importing video clips using my Canon XL1s in final cut pro.  See the video, I hear the audio until it is imported.  any suggestions

  I am importing video clips using my Canon XL1s in final cut pro.  See the video, I hear the audio until it is imported.  any suggestions?

  danobtwo wrote:

  See the video, I hear the audio until it is imported.  any suggestions?

  Do you mean during the import process?

  There is no FCP X parameter to change the way THAT DV is imported.

  I used to hear the audio import with Sony cameras but Canon may be a different story.

  If the imported files are OK, then it can be a thing of Protocol firewire Canon.

  Al

• 5.7.1 Lightroom and NIK collection. I installed Nik Collection correctly. I followed the instructions from Adobe for importing the plugin in Lightroom. If I go to "photo" / "past to" (I use the Italian version, so I don't know if the translation of the po

  Lightroom 5-7-1 and NIK Collection. I installed Nik Collection correctly. I followed the instructions from Adobe for importing the plugin in Lightroom. If I go to "photo" / "past to" (I use the Italian version, so I don't know if the translation functions and controls is correct!) happens that all plugins are visible but not active. And even the default plugins are no longer active. I have repeated several times the procedure installation, but without result. Can anyone help? Tiziana

  You may need to do a manual install. See if this link helps:

  https://support.Google.com/nikcollection/answer/3002259?HL=it

• 6 of Lightroom cannot read my Canon 5 d Mark III photo files, the import message I received: the following files were not imported because they could not be read. I use the same camera that I used Lightroom 5 with the same cards Compact flash.

  6 of Lightroom cannot read my Canon 5 d Mark III photo files, the import message I received: the following files were not imported because they could not be read. I use the same camera that I used Lightroom 5 with the same cards Compact flash. The files are: DK5A0243. CR2

  Lightroom 6 trying to copy pictures to a different directory than what is Lightroom 5. That's why you have the problem.

  You can change the directory where you are teaching LR 6 to place photos, or change the permissions on this directory to read & write.

• OVF inside the use of comments

  Are there examples of taking an OVF xml within a linux guest, it scans for IP or anything and then doing something like change the IP?  I fight with this part for Linux.

  Thomas H. Bryant III

  Director, Advanced Technologies & products

  Vizioncore, Inc.

  VMware communities user moderator

  The sample script vami_ovf_process, it is located in/opt/vmware/share/vami. It is written in python, so if you don't mind writing python code you can use this code as a reference.

  It is present in the comments script on all linux VMs Studio construction.

• Is there a reason to save the original NEF files after import for the LR in the form of files 'convert to DNG?  Is there a reason to save the two versions?  The NAVE seems to have no further use other than too much hard drive space.

  Is there a reason to save the original NEF files after import for the LR in the form of files 'convert to DNG?  Why save versions when the DNG is the original and the NAVE seems to just take remote hard drive space?

  I see no reason to keep them, they take a lot of space, one of the reasons to convert to DNG is that they are almost 20% smaller than the ships.

  But it is of course your choice...

• How can I get rid of several clear green empty frames in the video that I just imported to iMovie?

  How can I get rid of several frames white green clear in the video that I just imported to iMovie (9.0.4)?

  I can not just delete them because this would create a rupture in the audio (I need) that will

  along these blank frames. What 'stretching' the last good image while keeping the audio?

  Thank you for all the ideas, your time and patience. I am new to editing.

  W.W.

  Have you tried to add a freeze frame to the position of the last good image?

  Place the cursor in the timeline panel on the frame that you want to extend, and then ctrl-click, select 'add a free framework '. Adjust the handles to resize the fame of gel.

  How can I get rid of several frames white green clear in the video that I just imported to iMovie (9.0.4)?

  You use iMovie 9.0.4 or the imported movie created in iMovie 9.0.4? I don't know what version you are currently using.

• What is the best audio format to import a CD?

  Dear people of the communities,

  What is the best format in terms of better sound quality for an import CD, regardless of the size of the file, just a pure sound quality?

  The goal is to save my music library CD and vinyl in a computer/drive and listening using a computer connected to a sound system 'Stereo' (not ' Surround', regular stereo) with speakers high quality stereo (L + R).

  So far, I've downloaded using a 320 kbps MP3 format. Listening to a CD quality is very poor.

  I use iTunes 10.7.x (as well as iTunes 12.x on a newer platform, but imports of CD I use version 10.7)

  All parameters are the following:

  Import using MP3 encoder =

  Parameters = custom

  Use the Error Correction = No.

  ---------------------------------------------

  Stereo BitRate = 320 Kbps

  VBR = No

  = 44,100 kHz sampling rate

  Channels = stereo

  Stereo mode = Normal

  Smart encoding = No

  Filter Freq below 10 Hz = No

  I think he wouldn't be WAV course, AIFF and Apple Lossless I know are both better quality, but using an Apple encoder can restrict what will be the player who is also important.

  Thank you

  Alon

  .

  Any lossless format will offer the best audio quality.  The available choices:

  • WAV is probably the most widely supported but it lacks the ability to incorporate metadata or illustrations, so while you can move the audio between different systems files as soon as you go outside iTunes you will lose all the artist / album / song information.
  • Apple Lossless (ALAC) is definitely the best choice in iTunes - he has the same metadata / support work such as MP3 or AAC and supports full 16/44.1 audio with file sizes about 65% of the equivalent WAV file
  • AIFF is very similar to the ALAC, except that (in the Variant used by iTunes), there is no lossless compression, so the file size will be larger

  The determining factor here will be where you intend to use the files - many other readers take in charge of the three options mentioned above, either natively or (for the ALAC and AIFF) using the appropriate plugins.  Unfortunately the lossless codec which has the broad support of all (FLAC) is not supported by iTunes.  There are, however, many utilities out there that can convert between ALAC and FLAC (and vice versa) if that proves necessary.

• Can export the bookmark properties, but cannot import them

  Hi, I am a long-time firefox user and used to put comments in the field of < properties > my favorites. I regularly export favorites and looking at my files of exported bookmarks, I can see my comments. However, due to a problem of PC I have, for the first time, had to import my favorites. They are without error, but less unwieldy comments. I hope that some clever soul will be able to tell me how to import bookmarks with my comments as it will take me ages to recreate all these small comments for each bookmark. Thank you

  I'm not sure if the importer may be required to do more it does already, but I hope that other more savvy will find your question.

  Do you still have access to one of your old profile folder? There, in the bookmarkbackups folder would be the .json files which should 'restoration' with all the details. Note that the restoration will replace completely all your collection of bookmarks, so if you added something new, make sure you keep that separately.

• Question about the use and connection of external mini HDD

  I am the owner of a satellite A30 714, which has only 2 usb ports, and I just bought a mini hard drive (toshiba also), which requires the use of 2 usb ports, which means that I won't have any left port for mouse or something else.

  The hard drive has an optional port of AC, but I can't find in the manual of the energy required to buy a compatible cable, so I'm asking for suggestions... can I use a multi usb hub or it will not provide enough energy? What is the cable AC adapter that I should try to find?
  find a solution in the firewire port? (the computer has a port alternative mouse).
  Can I install an additional usb port?

  can someone help?
  Helena

  Hello

  The fact is that a single USB port provides about 500 my.
  If HARD drive Manual requires the use of two ports USB together if the HARD drive needs more power than a USB port can provide.
  Of course, you can try using a USB hub, but please check if the USB hub supports an external power supply. It is important.
  I don't know where you can find the power supply for the external HARD drive. You said that it is a product of Toshiba. Well, maybe you can order the cable of the Toshiba service partner in your country.
  But first of all I would like to ask the dealer who sold you this HARD drive.

  I'm not sure the firewire port, because you need an adapter "USB to Firewrier '.
  But I can't find any.

• Creation of my own CA, self-signed certificates and the use of these

  I'm stupid. Three years ago, I created my own CA and my own wildcard certificate for my OS X Server (always 10.8.5 with Server 2.2.5). I install my public Root CA on clients who make use of my server. At these must not often updated and the work is complex, so I created a CA Vault take care of a few scripts and configuration of openssl. What I forgot is document how to get these used by Server.app. That's why I'm stupid, because I struggle to reproduce what I did and discovered three years ago.

  I use two scripts. (MYNAME, mydomain and tld are generic strings, of course in reality I use my own name and mydomain.tld)

  The first is for the creation of a root certification authority:

  #!/bin/bash
  
  # Only edit these:
  mycaname="MYNAME Certificate Authority"
  myrootname=mydomaincaroot
  
  # Run in current dir:
  mydir=`pwd`
  
  mkdir RootCert >/dev/null 2>&1
  
  if [ ! -e "$mydir"/RootCert/"$myrootname".key -o \
       -e "$mydir"/RootCert/"$myrootname".crt ]
  then
      openssl req -config "$mydir"/openssl.cnf \
    -new -x509 \
    -keyout "$mydir"/RootCert/"$myrootname".key \
    -out "$mydir"/RootCert/"$myrootname".crt \
    -days 3650
      openssl pkcs12 -export -clcerts \
    -inkey "$mydir"/RootCert/"$myrootname".key \
    -in "$mydir"/RootCert/"$myrootname".crt \
    -out "$mydir"/RootCert/"$myrootname".p12 \
    -name "$mycaname"
  
      echo "Now import ""$mydir""/RootCert/""$myrootname"".p12 in KeyChain"
      echo "For this, unlock the System KeyChain first, then import"
      echo "NOTE: this imports your private key in the System Keychain"
      echo "So it can be used for signing activities."
      echo "This is less safe then keeping your private key on media that"
      echo "cannot be accessed from the system, like a safely stored USB stick"
  else
      echo "Your root CA crt and key already exist! I will not overwrite this"
      echo "as this could overwrite a still used private key and lose you access"
      echo "to signed certificates, e.g. for revoking them"
  fi
  

  I think I know what to do (but Advisor is always welcome). I have to add the certificate of generic identity for the Keychain system, after which I can use in.app.

  Now I encounter another problem: when I enter the certificate in the system Keychain, it ends up in/etc/certificates without a. fichier.pem. See: OS X 10.8.5 Server 2.2.5/Keychain Access certificates issue for more details.

  Help is always welcome.

• "The document could not be imported" - iBooks author help

  With the help of:

  MacBook Air OS X El Captitan 10.11.3

  Keynote 6.6.1

  I try to import a Keynote file into iBooks author using the Widget but get the following message is displayed:

  "The document could not be imported.

  Thoughts? Solutions?

  Some seem fine do in articles and videos online. Several times, I get the same message after trying several keynote files.

  Hey there jpatronic,

  I see that you experience a problem when you attempt to use a Keynote presentation with iBooks author. I have an article for you related to this topic, and it can be found here:

  You can also drag a Keynote (.key) file directly to the book page without adding a widget to Keynote first.

  Important: Images in a Keynote file should not be higher than 25 megapixels (5000 x 5000 pixels) or 50 MB.

  You can't interact with a Keynote slideshow in iBooks author, but readers can interact with it in the finished book.

  iBooks author: Add a Keynote file

  https://support.Apple.com/kb/PH2793

  Thank you for coming to Apple Support communities!