The use of two monitors external and Tecra M5

Hello

I was employed to work with two screens of 17 "connected to a computer monitor in extended desktop mode, ii just changed job and now I have the following configuration:

a Toshiba laptop connected to the Toshiba Tecra M5 docking station and an external 17 "monitor connected to the port of digital dockstation which works very well.

I also have connected another monitor 17 "external to the Dockstation RGB port but Black Guard

I ' ts really terrible work like this switching between the 17 "monitor and the computer monitor small toshiba laptop.

What I would like is to work with the monitor two external 17 "and keep the laptop monitor off, or if possible.

Any ideas?

Any help will be very welcome
Husband PAz

Hello

What docking station do you use?

Advanced Port Replicator III or Advanced Port Replicator III more supports the use only if the laptop itself also support the simultaneous use of RGB & DVI.

I don t think that Tecra M5 can do

Tags: Toshiba

Similar Questions

  • What is the procedure for the use of two monitors?

    What is the procedure for the use of two monitors?

  • The use of two external monitors on XPS L702X

    Hello

    I have laptop Dell XPS L702X and you want to connect two monitors external to it when I'm at my desk.  The laptop has a HDMI and display Port.  Could someone tell me 1) if it is possible to connect two external monitors to my laptop.  I do not know if this is supported.  (2) if it is supported what would be the best way to do it.  Here are some of my thoughts, but I don't know if they will work

    (1) port HDMI to a monitor and Display Port to the other monitor.  It will even work?  The monitors will look the same?

    (2) HDMI to DVI Splitter.  This seems reasonable but it will reflect the entire screen or I will be able to extend the desktop.  I don't want to see the same thing on both monitors.  Will also be this gradient.  I was kind of hoping it Full HD that I don't need absolutely.

    http://www.Amazon.com/HDMI-dual-premium-splitter-cable/DP/B000FMPR0Q

    (3) using the HDMI then gettting and external USB video card.  I'd rather not but if I have to I guess I do.

    Thanks for your thoughts and please add more options than what I have just listed.   I want to find the optimal solution.

    Tom

    Well I thought about it.  Option #1 work.  You can connect two monitors to the Dell XPS L702X.  In fact, I have three.

    (1) the computer screen

    (2) monitor 1 using the HDMI output on laptop to the HDMI input on the monitor

    (3) 2 of Montor output using Mini Display Port to VGA input on screen (using a Mini Display Port to VGA cable) I see these cables everywhere on the internet, but they all say to use with Mac.  I call the Dell technical support and they managed to send me the right cable for use with Dell.  Others may work, however, I'm not sure.  It is unfortunate that Dell doesn't have a Mini Display Port to DVI - D.  I want conversion back VGA is going back in time.  The display seems perfect for a regular job but don't know about the movies or games.

    Complaints to Dell if someone he cares

    (1) I called your sales for the purchase of monitors line and they told me wrong information on how to connect monitors and those to buy.  First, they said I had to buy a usb docking station.  The station costs around $100 and it would very definitely degrade the display.  I have the hdmi and display port of course so I want to use them.  When I pressed on this they then tried to get to buy me and switch hdmi for over $ 150.  I personally do not think it will work because I want to extend my screen do not have the same result on both.  Maybe it would work well, they seem not confident even though I was told it would work.  Also, I didn't drop $150 extra.  So I don't end up buy monitors dell of Dell because of the wrong information.  Oh they also told me I wouldn't be able to have 3 views using my video card and that I would need an external. (Evil)  Overall that's mad and I lost a lot of time trying to do a simple task of connecting monitors.

    (2) I finally decided to call Dell technical support.  I should have done this earlier, but every time I call the technical support they want me to pay.  Fortunately I get assistance for a new computer.  I'm starting to feel better Dell again.  Technical support told me that I could connect two monitors using HDMI and Display Port.   They me even a cable for the display port.  OK, I'm getting happier.  However, technical support also told me that I couldn't use 3 screens and that I would need an external video card.  They tried to repel the horribly rated usb docking station that they sell.  In all of the right specifications mine but reviews everyone has problems.  Anyway they Support went above and beyond (and I was not screaming or complain to them) that they actually had a technician out the cable.  Now, it is an exaggeration, but was really nice, because I was not happy with Dell for the moment.  I hooked the two monitors and extended my screen and to my surprise, all three screens worked.  Yahoo!  So happy.

    It was a frustrating race with bad information throughout, but ultimately, I'm happy.  I hope that you don't have to go through my frustration and make just the satisfaction of having 3 screens.

  • Satellite L850 - is possible to connect two monitors external simultaneosly

    Hi, I have a L850-150 and I would like to know if it is possible to connect two monitors external simultaneosly, one by Hdmi and the second by Vga to enjoy an installation of three active screens (including the laptop screen). Im trying to figure out how to do without using a USB to adapter vfga or a Matrox dualhead2go.

    I want to use the outputs existing.
    Thanks in advance

    Some laptops supports a dual output: for example the Qosmio X 500 as shown here:
    http://APS2.toshiba-tro.de/KB0/TSB13033Y0000R01.htm

    But for Satellite L850 this isn t possible.
    But you can use an external device, such as Dynadock
    http://www.Toshiba.com/us/ACC-dynadock

  • website valid W3C, initially no error reported by the developer toolbar. But by right clicking (giving the menu validation), the toolbar reports two errors: width and height. Despite the fact that each page is posted! The forum for the toolbar, this i

    website valid W3C, initially no error reported by the developer toolbar. But by right clicking (giving the menu validation), the toolbar reports two errors: width and height. Despite the fact that each page is posted! The forum for the toolbar, it's supposed to be a browser error. So, how can it be fixed? I use FF 3.6.6

    This has happened

    Each time Firefox opened

    is after upgrade to 3.5?

    http://chrispederick.com/forums/viewtopic.php?PID=8239#p8239

    You create a new profile and install only the extension Web Developer, as recommended Chris?

  • When installing FF7, I clicked Yes to the "do you want to send info back to the developers on the use of memory etc." and now I want to no longer send information as his gel my browser then how do I disable that?

    Question
    When installing FF7, I clicked Yes to the "do you want to send info back to the developers on the use of memory etc." and now I want to no longer send information as his gel my browser then how do I disable that?

    See:

    • Firefox > Preferences > advanced > general: system default: 'send performance data '.
  • Windows XP loses two monitor settings and returns to the single monitor after to be identified only by the windows... No reboot is

    To begin with, I am the HelpDesk of the company and our users are running Windows 7, Vista and XP. The problem will occur randomly on most XP and Vista systems.

    I'm beginning to believe that it is a computer problem to the extent of the material or something of this nature.

    For now, I swapped the computer and now the question is not fooled by the user.

    But in general I wanted to know why this happens. They will be blocked (not a stop) their computer to take a lunch break and when they return to log in order to return to work. They work on two monitors and for some reason, as the settings go back to the single screen...

    Why this keep happening? Help, please?

    Either way, I don't think it's a driver problem... Because I just run images on hard drives of all application users run and the problem occurs randomly.

    Thanks in advance for your response...

    Adolfo

    Hello

    The Microsoft Answers community focuses on the context of use. Please join the professional community of COMPUTING in the TechNet forum below

    http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

  • my screen does not come on at all. hooked to the monitor external and still nothing. laptop lights

    HP G60-635DX laptop

    Windows 7 Home Basic

    Screen of death

    Turned on and the screen never came. The laptop computer on and sounds like it is starting fine but not the screen. I connected it to a monitor outside and still nothing. What should I do?

    Can sometimes remove the strips of memory and only one putting in the memory slot closest to the CPU. Doing this and try to start Windows. If no joy with the first module and then remove it and try the other module in the same position.

    If that doesn't do anything so I hope that your laptop is still under warranty. If it is to Contact HP.

  • The use of multiple monitors

    I have a MacBook end 2011 13 "model of Base. I plan to install 8 GB of RAM and use two monitors (one left) and the other on the right side of my MacBook. My question is this... Should what cables and ports I use?

    Thank you

    For 2 screens you need this.

    (1) for the main screen, you need a Display port to HDMI adapter.

    https://www.Amazon.com/Sabrent-DisplayPort-Thunderbolt-adapter-da-MDHA/DP/B017NK IQ8M/ref = sr_1_1? ie = UTF8 & qid = 1467923047 & s...

    (2) for the second screen, you need a USB to HDMI adpater.

    https://www.Amazon.com/cable-matters-adapter-2560x1440-1920x1200/DP/B00BPEV1XK/r ef = sr_1_7? s = electronics & ie = UTF8 & qid = 1467923139 & sr = 1-7 & keywords = usb + to + hdmi

    However, the USB adapter is not very sensitive. It is best to stick to 1 external display and the "Display port to HDMI adapter.

  • The use of other adaptors with Toshiba Tecra M4

    I have two Toshiba (PA2450U and PA3282U) adapters that also seem to work well with the Tecra M4. Is their use with the Tecra M4 something which can be recommended? Is it bad for the battery?

    Hello

    AFAIK the Tecra M4 has been delivered with this adapter:
    Universal AC adapter 15V 5A 75W 100-240V AC 50-60 self-adjusting, Hz - part number: PA3378U-1ACA

    The AC adapter - PA2450U uses voltage 15V 4A
    The AC adapter - PA3282U uses voltage 15V 5A

    In my opinion, you should use the supplied original AC adapter / CC, because in the long term, other adapters may damage the battery.

    Good bye

  • The use of two accounts different iCloud with Photos

    How can I use two accounts different iCloud with Photos of Yosemite OSX? For example... My wife and I have iPhones with iCloud different accounts and share a MacBook Pro, which use us her iCloud account. We want to be able to use the photo stream to upload our photos on our iPhones to the Photos on the MacBook Pro app. Thank you.

    I don't think there is a way to link the two accounts iCloud in photos.app library.

    However, my partner and I are in the same situation as you and your spouse: two phones, a MacBook Pro (MBP) and the need to share the photos with others and to optimize the space of our digital camera shots.

    In short, we use the following:

    -Two Photos.app libraries; one on each user profile

    -Two photos of iCloud albums; one for each phone (each of download us the best of our photos of the iPhone) shared with the other

    -A system of photo files referenced on an external hard drive for our digital camera

    -An album to iCloud for digital camera (again, for the best DSLR shots) shared with each other

    With this configuration, we can display each other best shots on all Apple devices through the iCloud sharing feature, and you can see all of our DSLR photos without cluttering the internal SSD.  This system is also convenient when you backup using time machine (configured to capture the MBP and external hard drive), because only one instance of the photo should be saved.

    My only complaint is that files referenced photo can not be uploaded to iCloud photo library a user directly, even if the referenced files will be shown along the iPhone photos side in the Photos.app (hence the need for a DSLR iCloud photo album).

  • Is it possible to have the audio from two different sources and routed to separate outputs at the same time?

    I currently have a string of the guitar signal electric-Rocksmith Real Tone cable - ASIO 4 all help IK Multimedia Amplitube 3.   I would like to know if I could also watch DVD with her while the implementation of the programme of Amplitube with sound.  It would be great that I use the DVD for guitar and play at the same time.   I don't have the signal of two merged as one.  In my mind, I should be able to disable the ASIO devices and use them with DirectX as usual.  I could send the ampitube signal to the headphones and use external speakers for the guitar signal, and use the lessons of speakers for the DVD (or maybe YouTube) laptop on board.

    Is this possible?

    How can I do?

    Toshiba Satellite X 205-S7483

    Jeff

    Yes.  For example, I have my Skype phone calls go to my helmet (normal just plugged in the headset) while my media player plays my speakers.  You can choose your default communication or multimedia devices with a right click on the volume control icon and choosing "playback devices".

    Other programs can also be built to be "to the output current" and allow you to choose the output too.

  • Windows Vista Welcome screen opens in the middle of two monitors

    I want to program WinVista then logon Welcome screen opens in the middle of the screen #1 instead when Vista starts it first, it assumes that the display is tense on both monitors so the Windows Welcome screen is literally in the middle between the two monitors (on the right side of the monitor to the left #1, left the #2 display right edge).  I would like to change when the Welcome screen? He

    Hello Boli.law,

    Thank you for using the Microsoft Windows Vista Forums.

    Sorry, you are having this problem!  However, in Windows Vista, there is no setting to change the boot logo in the registry. And with your dual monitor set up it stretches on both screens.  Thank you!

    Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Overview of the task with two monitors

    Hello, I use a dual monitor configuration. Lets take an example and say that I have two open browser windows and at least two Windows Word as well. A browser and Word Windows are open on monitor 1. and the other browser on Monitor 2. At the same time, I have visible browser windows on both screens, but I want to take a sneakpeek on a Word doc to compare some data I have on the the browser window on the screen 2. If I move the cursor of the mouse on the Word icon in the taskbar, I get previews of open task which are very nice, but as I do drag the cursor over any one of them, the browser window Monitor 2. disappears.

    In this case I can click on the word you want, comparison, and then cut again, but it's 2 clicks. It would be much faster and more ergonomic (no clicks), if I wanted to get an overview of the task for the window on the specific screen, where it is currently open, but in the meantime the window on the second monitor remains visible.
    Y at - it such an option to put in place?
    I hope that I gave a good example and was clearly. Thank you for your help.

    Hi Alex,

    I want to explain that the thing you want to get on the taskbar is not possible.  The taskbar functionality is to design that cannot be changed.

    See the link given below to better understand:

    http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-taskbar

    Thank you

  • 230 X: the display on two monitors with lid closed?

    My current setup:

    • ThinkPad x 230
    • Docking station series 3 ban
    • EVGA UV Plus + 39 vga box to allow setting up dual monitor

    I have the following problem, I don't know if they are related:

    First question:

    • When I close the lid on my laptop, it stops. I expect it would display Desktop on my two monitors.

    Second question:

    If I'm away from my computer, my screen become white.

    • I tried pressing the keys on my keyboard to wake up my system [does not]
    • I tried to open the lid: computer laptop screen is blank
    • So I have to shut down my computer, open the cover of the screen, and then close the lid and they press the button on my docking station to display Desktop to my two monitors?

    Do you know what causes this problem?

    Moderator edit: matched subject to content.

    1. disable stop option for "lid closed" settings within the app Lenovo Power Manager (Group of event parameters).
    2 could you be more clear. Please? Your laptop is going to sleep several minutes later (5? 15? same?) we let him? And you can not wake him normally?

Maybe you are looking for

  • How to clean the printhead on an HP Photosmart Plus model B210e using Windows 7?

    How to clean the printhead on an HP Photosmart Plus model B210e using Windows 7? I can print in color, but not with the black cartridge, what's new...

  • El Capitan degrades the OS functionality

    I installed El Capitan 10.11.2. Update went well, no problem. Since then, however... Scanner CanoScan 4400f is no longer supported. Canon 5 d mk3 camera is no longer recognized and Photos usurps my favorite Adobe Bridge and Adobe Downloader. Office 2

  • have an error code 800F0825

    I didn't know about it until what I looked in windows view dates and seen is wrong on it failed, what should I do? Said that it was important. KB955430 vista windows I tried to do what you said the other woman, but nothing has happened to this subjec

  • Windows xp sp3 shows perparing to install the screen on startup

    On windows xp sp3, whenever I start up and constantly after that I get a box, Setup of windows in the box it says preperaring to install and I can't get rid of it. He keeps of flashes and if I get to cancel it, it comes back and even more once this p

  • Deletion of fonts in Vista

    How can I remove the stupid, ugly and useless Chinese fonts that came with Vista Home Premium in the Windows/fonts folder? The 'Properties' window for each policy shows no restriction. Thanks in advance.