The use of two accounts different iCloud with Photos

Similar Questions

• What is the procedure for the use of two monitors?

  What is the procedure for the use of two monitors?

  

  

• The use of two different NICs on the RT?

  Hello world... I am currently working on a project where I have to deal with the problem mentioned in the thread topic: I have a PC with LabVIEW RT which must be able to establish network connections using two different network cards. One will be used to connect via TCP/IP to a host computer that will show you the data transmitted through variables shared; the other communicates with another PC via the Modbus Protocol. The key is that each communication is done through a separate network card.

  So far I could not understand how to set up these two things happen. Does anyone know how to do this? Advice will help you.

  For communication of RT, I use a project of RT standard, with the RT PC, given one of the IPs, and for the part of Modbus, I created a server I/O with a master and a slave. Separately, everything works fine, but when I get them together it does not work.

  Thanks for your help!

  Sorry it took me so long to answer, I've been busy lately... I found a solution to this problem that I mentioned, and just in case anyone has similar problems in the future, I will briefly describe what happened.

  Caseyw suggested, he had to allow both NICs through the measurement and Automation Explorer. The cause of the failure of connections was in fact that I was not using the 'right' for Modbus communication, which was rolled out on the secondary card. The solution was to use the URL Protocol with the correct path in the field, addressing the right IP address. To avoid making this post a mixture of subjects, I do more futher, but I got the gist of it, so if someone has similar problems when I work with multiple network cards or Modbus communication protocols, do not hesitate to contact me, I'll be happy to help you.

  Thank you

• The use of two external displays with my Macbook Pro 7.1

  Can I use two external VGA monitors with my Macbook Pro 7.1 (mid-2010)? What do I need to connect them? A mini display port and a VGA splitter?

  I think it is a good idea.

  But what you can do is to get a mini displayport to VGA.

  Then get this one. In this way I think than its cheapest

  http://www.Amazon.com/GP/product//B00CIZ5C5I/ref=twister_dp_update?ie=UTF8 & PSC = 1

• How to create two accounts (different passwords / different e-mail addresses)

  From the outset, does not yet have a Surface, I am seriously considering the purchase of a.
  In fact, I still have donot have a tablet at all :-)

  I heard that - starting from 4.2.2 - Android, it is possible to create multiple accounts.
  This is important to me.

  Would like to know if it is possible with 2 surface. Meaning:
  -Two accounts
  -Two email addresses
  -Two log-in codes, according to the entered login code, either the first or the second account (environment) is launched.

  Where to find the "How to" step by step?

  Thank you!
  =

  Yes, you can add additional accounts to your Surface. You can add additional administrator, child accounts, and user accounts. Details below.

  http://Windows.Microsoft.com/en-us/Windows-8/user-accounts-frequently-asked-questions

  http://www.Microsoft.com/surface/en-us/support/security-sign-in-and-accounts/all-about-accounts

  http://www.Microsoft.com/surface/en-us/support/security-sign-in-and-accounts/sign-in-and-out-of-surface

  Hope that the above is useful.

  Sean

• The use of two monitors external and Tecra M5

  Hello

  I was employed to work with two screens of 17 "connected to a computer monitor in extended desktop mode, ii just changed job and now I have the following configuration:

  a Toshiba laptop connected to the Toshiba Tecra M5 docking station and an external 17 "monitor connected to the port of digital dockstation which works very well.

  I also have connected another monitor 17 "external to the Dockstation RGB port but Black Guard

  I ' ts really terrible work like this switching between the 17 "monitor and the computer monitor small toshiba laptop.

  What I would like is to work with the monitor two external 17 "and keep the laptop monitor off, or if possible.

  Any ideas?

  Any help will be very welcome
  Husband PAz

  Hello

  What docking station do you use?

  Advanced Port Replicator III or Advanced Port Replicator III more supports the use only if the laptop itself also support the simultaneous use of RGB & DVI.

  I don t think that Tecra M5 can do

• The use of bind variables (in & out) with sql dynamic

  I have a table that contains code snippets to make postings on a set of pl/sql database. what the code does is basically receives an ID and returns a number of errors found.
  To run the code, I use dynamic sql with two bind variables.
  
  When codes consists of a simpel query, it works like a charm, for example with this code:
  

  BEGIN
     SELECT COUNT (1)
     INTO :1
     FROM articles atl
     WHERE ATL.CSE_ID = :2 AND cgp_id IS NULL;
  END;

  However when I get to post more complexes that must perform calculations or run several queries I run into trouble.
  I have boiled down the problem into that:
  

  DECLARE
     counter   NUMBER;
     my_id     NUMBER := 61;
  BEGIN
     EXECUTE IMMEDIATE ('
        declare 
           some_var number;
        begin
        
        select 1 into some_var from dual
        where :2 = 61; 
        
        :1 := :2;
        end;
  ')
        USING OUT counter, IN my_id;
  
     DBMS_OUTPUT.put_line (counter || '-' || my_id);
  END;

  This code is not really make sense, but it's just to show you what is the problem. When I run this code, I get the error
  ORA-6537 ON bind variable linked to a position IN
  
  The error doesn't seem wise,: 2 is the only one IN bind variable and it is only used in a where clause clause.
  As soon as I remove this where clause, the code works again (giving me 61-61, in case you want to know).
  
  Any idea what goes wrong? I just use bind variables in a way that you're not supposed to use it?
  
  I'm using Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit

  Correction. With immediate execution , the binding is in position, but binds do not need to be repeated. My statement above is incorrect...

  You must link only once - but bind by position. And the connection must correspond to the use of the variable binding.

  If the connection never variable assigns a value in the code, link by in.

  If the binding variable assigns a value in the code, link as OUTPUT.

  If the binding variable assigns a value and is used a variable in another statement in the code, link as IN OUT.

  For example

  SQL> create or replace procedure FooProc is
    2          cnt     number;
    3          id      number := 61;
    4  begin
    5          execute immediate
    6  'declare
    7          n       number;
    8  begin
    9          select
   10                  1 into n
   11          from dual
   12          where :var1 = 61;       --// var1 is used as IN
   13
   14          :var2 := n * :var1;     --// var2 is used as OUT and var1 as IN
   15          :var2 := -1 * :var2;    --// var2 is used as OUT and IN
   16  end;
   17  '
   18          using
   19                  in out id, in out cnt;  --// must reflect usage above
   20
   21          DBMS_OUTPUT.put_line ( 'cnt='||cnt || ' id=' || id);
   22  end;
   23  /
  
  Procedure created.
  
  SQL>
  SQL> exec FooProc
  cnt=-61 id=61
  
  PL/SQL procedure successfully completed.
  
  SQL> 
  

• Your correspondent or the hue of two very different pictures

  I was asked to take the group picture, cut out the black girl and insert the young man.  See images below and my results.  the only thing that I am not satisfied, it's that the young man was better informed that the group one.  I was playing around with the controls of the young man to bring his tone more in line with the Group (hue, saturation, color levels; etc.) and I just couldn't understand.

  Can anyone suggest what I can do to get the young man to match your wise with the Group?  Or vice versa, even?

  Thank you.

  

  

  

  To load the file of curves, I sent, see the attached screen capture.  This is also the input and the output parameter used on the curve.  The red channel has not affected - just my habit to be a corrective color of years where we have never touched the red, just used the other two channels.

  

  

• the use of collections, copy a record with children/grandchildren

  I understand that loops FOR cursor are not as good as the use of collections, and now I need to convert some of my code accordingly.
  I've been doing a bit of good to read the documentation and have not yet encountered examples of the situation that is so prolific in our system; namely, someone wants to make a copy of a record, with its outbuildings down a few levels.
  
  Here's what looks like a typical of this instance (except that everything is in packages). Take the 3 tables: grandparent_table, parent_table and child_table, with primary keys being gp_id, p_id and c_id respectively (and related as one might guess these names):
  
  create or replace procedure p_copy_record (p_gp_id in grandparent_table.gp_id%type)
  is
  cursor c_parent
  is
  Select *.
  from parent_table
  where gp_id = p_gp_id;
  
  v_gp_id grandparent_table.gp_id%type;
  v_parent_id parent_table.p_id%type;
  Start
  Select grandparent_seq.nextval
  in v_gp_id
  Double;
  
  insert into grandparent_table
  Select v_gp_id,
  other_columns_here
  of grandparent_table
  where gp_id = p_gp_id;
  
  for r_parent loop c_parent
  Select parent_seq.nextval
  in v_parent_id
  Double;
  
  insert into parent_table)
  P_ID,
  gp_id,
  other_columns_again)
  Select v_parent_id,
  v_gp_id,
  r_parent.other_columns_again;
  
  insert into child_table)
  C_ID,
  P_ID,
  other_columns3)
  Select child_seq.nextval,
  v_parent_id,
  other_columns3
  of child_table c,.
  where parent_id = r_parent.parent_id;
  end loop;
  end;
  /
  
  I tried to change the code of this a few different ways, but running into errors. The main problem seems to be that the collections don't refer to an element, in order to make this join (where parent_id = r_parent.parent_id).
  
  How you would replace the slider - for loops here (using 10 gr 2)?
  Thank you

  To replace the sliders, you will need to fill a table with the same data. Then process these tables

  create or replace procedure p_copy_record (p_gp_id in grandparent_table.gp_id%type)
  is
  type gp_array is table of grandparent_table % roytype;
  type p_array is the table of the parent_table % rowtype;

  l_gp gp_array;
  l_p p_array;

  v_gp_id grandparent_table.gp_id%type;
  v_parent_id parent_table.p_id%type;
  Start
  -get the next gp id
  Select grandparent_seq.nextval
  in v_gp_id
  Double;
  -bulk collect the current record of the gp - you don't really need but for pleasure it's im
  Select * bulk collect into l_gp from grandparent_table where gp_id = p_gp_id;
  -creation of a grandparent registration
  insert into grandparent_table
  values v_gp_id,
  .name l_gp (1),
  .other_columns_here l_gp (1);

  -Now bulk collect the parent records
  Select * bulk collect into l_p Parent_table where gp_id = l_gp (1) .gp_id;

  FOR i IN 1.NVL(l_p.COUNT,0) LOOP
  -get the next parent id
  Select parent_seq.nextval in the double v_parent_id;
  -create the parent record
  insert into parent_table)
  P_ID,
  gp_id,
  other_columns_again)
  v_parent_id,
  v_gp_id,
  LP (i) .other_columns_again;

  -While we are here create the records for this parent child
  insert into child_table)
  C_ID,
  P_ID,
  other_columns3)
  Select child_seq.nextval,
  v_parent_id,
  other_columns3
  of child_table c,.
  where parent_id = lp (i) .parent_id;
  END LOOP;
  END;

  To be honest, I'm not sure that you will really see a great improvement since you already limit the scope until the recording of one of the grandparents. Let's say the grandparent has 10 children each with 10 children who is just 111 records. As long as your tables are indexed by the node Id it should be fast just like that.

• Can I use the software to two accounts of adobe on the same computer?

  I have a work account that has Adobe Flash and Flash Builder on it, but I want a copy of Photoshop as well. The company does not pay for it, but I don't mind not just get the package of photography for me on an account staff adobe. Would it be possible to use both on my work PC at the same time or I need to switch accounts in Adobe cloud whenever I wanted to spend some programs?

  Alternatively, it would be possible to add the package of photography for my existing company account?

  From my memory of MISTY a previous question like this, what you have to do is...

  Disconnect a Cloud account (may need to restart your computer, not sure of that... foggy memory) and then connect to your account from OTHER clouds

• Two accounts of interfering with another

  Last year my college gave me a free year of creative cloud and I used my .edu for this account email.

  In March this year I knew the free subscription was almost over, so I bought the pack annual CC (monthly payment) with my personal email. I paid two months ago.

  But when my .edu pack was really over, the CC pilot began asking me to purchase a pack, saying that I didn't have a pack in my account.

  The weird part is that I'M connected to my personal account on the adobe website and the CC pilot.

  I have not reinstall my software, including creative cloud I was with another account so I felt as if I had to.

  
  Anyone of you have any idea, what could be the cause? any of you experienced this?

  The order placed in 10/04/15 is cancelled. ordered in May had no payment out were never met, please redeem.

  Concerning

  Baudier

• the pairing of two videos into one with IMovie

  I use two video cameras of hockey my son, one at each end of the ice (i.e. GOPROS) I am able to come down don't load the videos, no problem, however I can't seem to figure out how to take the two videos & match early in the game, and then select what video shows action better? I've seen other programs to match the two videos on top of the other and then (toggles between each video) to make a great film. Is this possible using IMovie?

  It is only provided for by professional non-linear editing (NLE), programs such as Final cut Pro where multiple injections of the same event, called "angles" can be combined into "composed of clips.

  In iMovie, you could put the video that has the best sound in the timeline panel, and then put the fragments of the other above (this picture in picture) video.  When you play, you will hear two sound tracks, but you can use these to manually move these fragments until in sync with the main video.  You can also use the waveforms on a time scale of timeline extended to help with this.  When close enough, you can increase the volume of the audio fragments to zero or detach and remove them.  It will be quite a lot of time and this is what can be done automatically in professional NLE.

  Note that it is possible to try Final Cut Pro for free for a month.  The layout of the interface is quite similar to iMovie.

  Geoff.

• How to share the contents of your drive to iCloud with someone you work with?

  I'm working on a project with a trusted friend. I would like for us two power download and download large files from my drive to iCloud. What is the best way to give that person access to my iCloud drive?

  # ICloud is for a single user.

• the use of two meters: one for the generation of regenerable impulses, one as a counter

  I'm new on use the counters. I use an NI PCI-6110 multifunction data acquisition card. I want to count a digital input (on the connector of the PFI 2) pulse and also using the entrance to trigger another counter to generate impulses. So I configured the first counter (task 1) to generate digital pulses with PFI2 as a source of relaxation and redeclenchables award; and set up the other counter (task 2) to count the number of edges of the digital signal with.... But after the two tasks began, the first task was an error 50103 (or the possible reasons: NI Platform Services: the specified resource is reserved.) The operation could not be performed as indicated.) The block diagram is attached. Thank you.

  Your Board uses very-old-in-electronic-standards-DAQ - STC a smart meter that requires a little secretly * two * counters work together to make a finite pulse train.  He is not actually secret if you read the right parts to the right documentation, but it's not hard to miss if you are unsure you should look.  It has been a while since I've done a lot with these counters, but I have this nagging thought that they may not support redeclenchables finishes pulse train generation at all.  I would caution you to at least check this.

  In any case, it is the reason for the error.  The finite impulse generation task uses only the counter that you specify, but there was also this one to help.  A couple of new generations of smart meter (NOR-TIO, DAQ-STC2) continues to have this limitation, but the * more * recent it is no longer made.

  X series boards use the chip "NOR-STC3" that give you 4 programmable counters by the user instead of 2 * AND * everyone can generate pulse trains finish without using a help desk.  You may want a pair of them upward with your 6110, assuming that you need simultaneous sampling analog 6110's capabilities.

  -Kevin P

• XP insists on the use of guest account

  I just installed SQL Server 2008 Express on a computer with XP SP3. The installation showed no failure & I can locally access and query databases.

  I have a 2nd machine running also XP SP3 which can also access and query the databases mentioned above on #1 using Sql Server authentication.

  When #2 tries to use Windows authentication, it (#2) insists on using the guest account to Windows # 1 to access the SqlServer guest account.

  If I disable the prompt Windows or SqlServer comments # 1, Windows authentication fails, saying that the respective account is disabled.

  I have the same username on the machines and the same password. I also tried using the administrator account on both machines with the

  same results. Each machine I use Windows Explorer to access any file on the remote computer. So I think that and

  are exactly the same on both machines.

  Both machines are on the same workgroup. There is no domain controller.

  I did another experiment.   #1 can access and query data bases on #2 using Windows authentication WITHOUT using comments. In fact invited XP is

  disabled on #2 most SQL Server Express does NOT include a guest connection.

  I posted this problem on the SQL Server Express forum, but had only 1 response which implies that the problem could be due to the configuration of XP. He

  certainly no response suggested a SQL Server configuration problem.

  Any help will be much appreciated. TIA, Joe

  Well, I found the answer & nothing to do with Sql Server 2008 Express.

  The problem was with the #1 machine's local security policy setting. Specifically, the network access: sharing and security model

  for local accounts. You had to be on "classic - local users authenticate themselves."