The user commissioning of OID to EBS works not

Similar Questions

• My connection to the laptop for Sharp AQUOS HDTV stop work-"not compatible with this signal.

  My connection to the laptop for Sharp AQUOS HDTV stop work-"not compatible with this signal.

  Hello Bonnie,.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your laptop?

  Thank you for details on the issue.

  I also know that the inconvenience that you are experiencing due to connection HDTV problem. I will definitely help you.

  This problem may occur because of corrupted device drivers or incorrect device settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the hardware and devices Troubleshooter and check.
  Reference:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  If this does not help, use method 2.

  Method 2:
  Please refer to the suggestions of Aziz N replied on September 8, 2010 and check the issue.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/i-get-a-message-not-compatible-with-this-signal/206d6023-a7a2-4DC9-bc3a-01d382a3acbd

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• The user profile service has no connection could not load profile __User

  I use Windows 7 ultimate, I can't log on to the computer that shows me that "the user profile service has no connection. Unable to load the user profile.

  So how do I do?

  This error can usually be fixed by following the steps below. All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  1 log on to a different user account with administrative privileges. If you neglected to make an account additional administrative steps 2-3. Otherwise, continue to step 4. See also General information on setting up the accounts of users at the end of this post.

  2 in Mode safe boot. This, by repeatedly pressing the F8 key as the computer starts. That you will get to the menu on the right where you can use your arrow key to select Mode safe [Enter]. The built-in Administrator account is disabled by default in Windows 7. However, if no other administrative accounts exist on the system it can be activated. If this is the case, you will see an icon for the administrator on the homescreen mode without failure. Login to the administrator.

  3 If you don't see the icon for the administrator mode safe account, then the built-in Administrator account is always disabled so you will need to work more. If you have a Windows 7 DVD installation (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [Enter]

  [Note: do not enter the brackets!]

  If you do not have an installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair the system Windows 7 (not a system recovery!) in the menu diagnosis. This menu of diagnosis is the same one where you can choose Safe Mode.  Or you can make a bootable DVD of Windows 7 repair of the file on this link:

  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent asmuTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. If you create the bootable DVD in an older operating system, you need third-party burning like Nero, Roxio or free ImgBurn software to burn the .iso image image file, not in the form of data. Windows 7 can burn the .isos natively.

  Now, remove the rescue DVD you made, restart windows system and log into the built-in Administrator account, you enabled.

  4. try a system restore to when things worked. If you can log in to your user account, you are finished. Otherwise, continue to step 5.

  5. the critical files are under % systemdrive%\users\user-account\ntuser. The ntuser.dat file is actually a registry hive. Run Regedit high and select HKEY_USERS and "load hive" in the menu. Now, go to:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  There is a line for each profile. If a profile is bad, check:

  (a) that the name of the key does not stop in ".bak" (remove .bak If it)
  (b) that the RefCount value is 0 (change it if it is different)
  (c) that the State value is 0 (change if different)

  Make the necessary changes, close Regedit and try to connect as this user.

  6. If that doesn't solve your profile, it is corrupt. When you do that, you should make a new Standard user account and copy your data to it. Do not delete the old account until you have recovered data you need!

  Once everything works, go to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Windows 7

  You absolutely don't want to have only one user account. Like XP, Vista and all the other modern operating systems, Windows 7 is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want account only one user with administrator privileges in Windows 7 because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it can be more work you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).
  MS - MVP - Elephant Boy computers - don't panic!

• The use of the dedicated graphics card? Power management works not at all, no difference

  I bought a lenovo g500 and after installing every single player on this site, I decided to test some games from my pc to the laptop.

  Unfortunately, I see the games from the pc do worse than what they do on the pc (and the pc is old) so I think that the amd graphics card are not at all. Can someone explain how to enable the amd radeon video card? BIOS does not help and the CCC (catalyst control center doesn't help either).

  For example:

  I could run borderlands 2 in a little weak graphics on the pc perfectly.

  However on my laptop I can not even reach the main menu because of the very low fps.

  Another example is crysis 2, works perfectly on the graphic means on the pc, runs on 2-4 fps on the laptop.

  Features of the laptop:

  Video card

  Intel HD 4000 (one built-in) + ddr3 2 GB AMD Radeon HD 8570 (128-bit)

  Memory

  4 GB of ddr3 memory

  Processor

  Processor Intel Core i7-3612 QM @2.10 ghz

  Specifications of the PC:

  Video card

  NVIDIA GTX 650 1 GB ddr3 (128-bit)

  Processor

  AMD Dual Core 6000 + @ 3.2 ghz

  Memory

  4 GB of ddr3 memory

  Applications in full-screen mode using lags like hell, my mouse moves in slowmotion too much (real slowmotion)

  Edit: windows is 64-bit windows 7.

  The solution was to install windows 8 (bought a copy of the professional edition x 64), and then install the drivers from the site. Now everything works as expected. Must have had a problem with the windows 7 x 64 and x 86 drivers... Well, now it works.

  @shauni: tried with borderlands 2, could get 11-13 fps MAX during the game with graphics maxed out regardless of the diet plan, but as soon as I switched to windows 8, the amd video card started working and I now have 40-50 fps (which for me is UBER OPTIMAL). I always get 11-13 fps if I unplug my laptop well.

  SOLUTION OF THE SHORT VERSION:
  Install windows 8 (x 64 in my case)

  NOTE: the drivers on the site are buggy for windows 7 x 64 / x 86. Date today: 8 October 2013.

• I'm trying to restore the Vista system on a Dell computer. It restores to the point where I have to put in the user name and password, but it does not type in the username areas. Help. Thank you

  I use the recovery disks, restore the Visat OS on a dell laptop.  After the OS system, it displays the screen that requires the user name and password.  I can change the image associated with the user name, I can move the box around the screen, but it won't let me type in the username and password box.  Without putting the usernane and the password it will not go further, and I can not restore.  Help, please.  Thank you.

  Hello

  This is the Information from Dell to reinstall using disks:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_339949&isLegacy=true

  For any problem using it, contact Dell:

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support

  Or post in the Support Forums:

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• ACS5.2 joined the announcement, allowing the user through internal OK, through AD does not

  Hi all

  My ACS5.2 joined to Active Directory in Windows 2003 with success. I created the support group with user1 in the store internal, also created the Group of support-AD with userad1 in the store AD. Sequency identity store is defined internal first, then AD. I can map Support-Group to the Group of local support without any problem.

  Internal user is authenticated and authorized OK. However, if the user is a user of the AD, the rule for users of the AD is not recovered. So, by default.

  I must have missed something. Help, please. I have uploaded my screenshots. Thanks in advance.

  Robert,

  Something that I found to be very useful for troubleshooting these types of problems in ACS 5.2 is the monitoring and report viewer.  If you start it, and then choose Protocol AAA left under the catalogue, it will present you with several reports, one of them being the RADIUS authentication.  Run the report, and then select the details by clicking on the magnifying glass in one of the entrances leading to the use of the default rule.  The details are very good and will display the results of treatment step by step and when your default rule is being chosen.

  I hope this helps.

  Greg

• Script to check if the user selected item from downdown list or not

  I have a script that runs when the form user leaves a drop-down list object after you make a selection. I don't want the script runs if the drop-down list object is empty (the user does not have a selection). I need to create an if statement to test if the user makes a selection in the drop-down list. All the items in the drop-down list are 4 digits.  I prefer the stated case is in the Exit event. The following script is correct?

  If (dropdown1.isNull | dropdown1.rawValue.length! = 4) {}

  xfa.host.messageBox ("you must make a selection, the drop-down list name");

  }

  else {}

  set the script to execute here

  }

  It seems that your script is generally good, but you try to do something more in the message box? Did you mean to carry the name of the drop-down list in the title or as part of the message?

  If you are not allowing the custom entry, you only need the null control. Of course, we only talk about one millisecond, or to check the length of your string. So, you are not asking all devices to perform intense processing.

  If I were asked to do, this is what my script would look like.

  

  

  If you allow custom entries, you must specify what the problem is for the user.

  

  

• One of the 3 links on a web page works not under Firefox 9.0.1 but all three work under IE.

  Please float your mouse over the Paypal button (in the lower left) and on the envelope button and the arrow will change to a pointing finger. It float above the adjacent Blog button and the arrow is an arrow. With Internet Explorer, all three buttons links work - but not with Firefox 9.0.1. Why is this?

  I have no idea why this works in Internet Explorer. The div with id "txt_582" is painted on top of the imagemap for the button "Blog". So this div block mouse clicks. Reduction of the height of this div may fix the problem.

• Can someone help me with the following: using Vista - ISATAP Adapter #3 works not - (code 31)

  I got nothing else problems with windows update (I use Vista home edition), and now I have the following:

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Device Type Microsoft ISATAP Adapter #3 device peripheral status does not work correctly. Windows cannot load the required device drivers. (Code 31) Plug - and - Play ID ROOT\ * ISATAP\0002

  I would really appreciate the help.

  Thank you
  Karen

  Hello

  You can ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to function correctly.

  http://support.Microsoft.com/kb/932520/en-us

  See you soon.

• of the instance-level (level 4) dynamic sampling works not

  When I put dynamic_sampling (level 4) as an allusion to a question, I see its effect and a good plan with lines estimated very close to reality. The response of the application in this case is 4 to 7 minutes
  
  But when I put dynamic sampling (level 4) at the instance-level or session, the query plan is the same as when he dynamic sampling is at level 2 (default). The response time for this setting is close to 20 minutes.
  
  The two plans to end tell 'dynamic used sampling!
  
  I want to effectively put optimizer_dynamic_sampling = 4 at the instance level. Anyone know what I can do to make this work?
  
  Thank you
  JC

  Read the manuals carefully.
  As a system or session parameter or when it is used as an indicator without reference to a table, level 4:32 blocks for each table that has two or more predicates, or a single predicate requiring Oracle to use a default selectivity. (Or if a table has no stats - in which case the sample is of 64 blocks).

  As an indicator of level table (which is how you referred to the two tables), level 4 is a unconditional sample of 256 blocks of the specified table.

  If your samples are completely different in both cases - and the larger sample size gets you a better plan. I think you would have to use the system or the session 7 level to get the size of the same sample at the level of the table 4.

  If you run the queries with the event 10053 set, you will be able to view the comments in the trace file on targeted sampling that takes place and a report on the number of blocks and the number of blocks actually sampled.

  Concerning
  Jonathan Lewis
  http://jonathanlewis.WordPress.com
  http://www.jlcomp.demon.co.UK

  "The saddest aspect of life is this moment that science gathers knowledge faster that society gathers wisdom."
  Isaac Asimov

• Windows security asked me to check the user name and password. I do not know, who do I contact?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas message: error

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi Maria,

  I suggest you to visit these below provided article.
   
  What to do if you forget your Windows password
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password
   
  In addition, technical support engineers Microsoft cannot help you recover passwords files and Microsoft who are lost or forgotten product features.
   
  Microsoft's strategy concerning lost or forgotten passwords
  http://support.Microsoft.com/kb/189126/en-us

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Smartphones blackBerry (victim of STROKE) to change the user name of BlackBerry ID and do not have a password or email

  Hi team, I'm rather desperate in unfortunate circumstances.

  My father had a stroke, and we are unable to connexiona his POP3 email and so here's my problem:

  We are trying to access his contacts on his BlackBerry ID, we do not know the e-mail address, and we know the answer to his question of "security" which is the family, but the reset password link is sent to the e-mail address that is no longer, we can access without his intervention.

  I'm desperate to retrieve the ID and change the email which is her email ID to another.

  Can someone help me please

  Best wishes

  Guy

  I don't have good news. See http://supportforums.blackberry.com/t5/BlackBerry-World/How-to-regain-access-to-your-BBID/m-p/254671... in case there is something that I think not. But I think that you must have access to this e-mail.

• Discoverer 11.1.1.7.0 against 12.1.3 with OAM 11.1.2 EBS to request the password for the user with Ondaaah

  Hello

  Oracle has not been able to help me to do this job; 2 open of SR for weeks and no good answer.  They referred me to the people of onlinappsdba and various other public Internet sites.  We run EBS 12.1.3 and Disco 11.1.1.7.0 with 10g SSO and Ondaaah and SSL.  That works very well, users, identity is established through Ondaaah on our corporate network, with zero sign - on.  I'm replacing 10gSSO by OAM 11.1.2.  OAM/OID works very well for EBS and OBIEE, always zero sign - on with the OID 11.1.1.7.0 and AccessGate piece (and a webgate for both).  (Too many servers to SSO support in my view, if something goes wrong, too many places to look.)  For Disco, I created the osso.conf in OAM 11.1.2 installed in a folder on the Disco and bounced of Disco.  This works OK if in OAM authentication method is based authentication forms, with OAM inviting the user to signon, OID and then passes the user name and password through the OID in Active Directory, and connect on Disco invites to indicate the user name, and then gives access to workbooks.  No prompt for password clubbing.  But when I try to activate Ondaaah as an authentication method in the OAM, discoverer invite first the "Oracle Applications" connection for a user name and the EUL.  But Disco then prompts the user a password, that no longer exists in fnd_user. because authentication is external.  Connections fail.  I am also unable to create a private connection; This dialog box Disco also invites a user password.  At the login page of Disco, the user session went to OAM and fact authentication successful via Ondaaah.  I can tell from follow-up to the session through Fiddler.  Transmitted to the disco but Disco missing something and password prompts.  Support OAM at Oracle seems to think that OAM is not send the cookie to Discoverer, although I'm not sure.

  First of all, Ondaaah with Disco should work with OAM, right?  Any thoughts on what might be missing?  I went through the MOS notes a few times, closely followed the tutorial onlinappsdba on it.

  Thank you very much.

  Tom

  The hotfix is described in Note 1616228.1 problem with mod_osso and custom authentication plugins.  Disco can work very well, with zero sign - we and OAM.

• Cartridge error, consult the User Guide, there's no support

  LEXMARK 5600, has an error message that says "ERROR of CARTRIDGE", consult the User Guide.
  Nothing seems to work & user guide has no information on this issue. This device is only 6 months old. PLEASE HELP ME FIND THIS PROBLEM.

  Thank you
  jimipman

  You should have a warranty of 1 year with this printer. Call the support of Lexmark. Microsoft doesn't sell printers.

• Lost access to the IDENTITY of the USER when connecting... Went to unknown user

  I worked last night for a few hours and installed two products ASHAMPOO (their Photo and Office Automation) and everything worked very well after that restart and I made sure that everything was fine and was working properly with the new program and those that exist as well.

  I woke up this morning and turned on the computer and an error came up saying it couldn't find the USER regular (or standard), but there was no name of the user and it is then open to an empty office.  I did a system restore to yesterday but STILL NOTHING.  I went to the USER ACCOUNTS from the control panel and don't see any other than comments and administrator designated account, but both are empty files and folders and items on the desktop. I see again all MY programs and files that I used when I look in Windows Explorer, but have no way to import to a new identity (or user) I created for all.  I checked to see if the files and folders had any rhyme or reason, but it seems that the USER account I am looking for is not able to be accessed by all means.  I see a folder on the C: drive, which seems to have my correct links to the office and I see as "Program Files" as well as with my programs (with the exception of Outlook Express (which is ALSO urgent). Now, I can also see on four accounts of user unknown (only through Windows Explorer - not in the field of user accounts) that I don't recognize, and all are empty of one of my articles information or office.  I desperately need to find a way to get the computer to use my USER account, so I can get my desktop computer, programs and send them.

  PLEASE HELP ME!

  This is much like a corrupt user profile.  It shouldn't be too hard to recover from this.  Try this Microsoft article:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  Hope this helps,
  JW