The user managed the issue of recovery

Similar Questions

• Satellite L310D - Viruses and the issue of recovery

  My partner has a Satellite L310D, which recently is victim to the virus of windows security.
  We initially tried to restore to a previous restore point but he resurfaced after a few days.

  We then reinstalled windows from the recovery partition of the HARD disk which seems at first sight have been around but after opening explorere and surfing the net, it keeps us bombing with a windows error.

  Also, when you are in the google search, then clicking on a link, it will open additional search pages and refuses to open the link.

  Finally, he did not finish we updated windows and lifted up a windows error which we can not get rid of despite their support pages.
  I learn the virus can have dug in the registry but I thought the restoration of HARD drive would address this issue.

  If he touched the entire hard drive and how do I sort?
  We do not have an available recovery disk.

  Any help would be greatly appreciated that we cannot use it as it is. Apart from this, the machine was great for our needs.

  > If it has affected the entire hard drive and how do I sort?
  Well, a virus could affect the functionality of the system.
  Usually the antivirus software should be able to remove this but some viruses are really good and new OS install might be a better solution.

  If you don t have recovery disks (generally you must create it in the first day of the purchase of the laptop), then you could order it here:
  http://backupmedia.Toshiba.EU/landing.aspx

  Welcome them

• The user managed backup hot

  Hello
  
  When we started a tablespace begin backup mode State, I know that the RCS data files will be blocked and the recovery log generation will be more. I just want to know where the DML activities occur when the tablespace mode backup how to get updated records? why there are no changes in the SNA? why there is excess redo generation compared with the normal DML region?
  
  Vincent

  This is not true, as a simple audit would have told you.

  SQL> select file#, checkpoint_change# from v$datafile;
  
       FILE# CHECKPOINT_CHANGE#
  ---------- ------------------
           1         7667692204
           2         7667692204
           3         7667692204
           4         7667692204
           5         7667692204
           6         7667692204
           7         7667692204
           8         7667692204
           9         7667692204
          10         7667692204
          11         7667692204
          12         7667692204
  
  12 rows selected.
  

  Note: we start with all files with the same checkpoint change number. All data is synchronized

  SQL> alter tablespace data_medium begin backup;
  
  Tablespace altered.
  
  SQL> select file#, checkpoint_change# from v$datafile;
  
       FILE# CHECKPOINT_CHANGE#
  ---------- ------------------
           1         7667692204
           2         7667692204
           3         7667692204
           4         7667692204
           5         7667692204
           6         7667727909
           7         7667692204
           8         7667692204
           9         7667692204
          10         7667692204
          11         7667692204
          12         7667692204
  
  12 rows selected.
  

  Note: file 6 is now out-of-synch with the rest of the database, as it has been in hot backup mode. Change of control point number is ahead of the rest of the database.

  SQL> alter tablespace data_medium end backup;
  
  Tablespace altered.
  
  SQL> select file#, checkpoint_change# from v$datafile;
  
       FILE# CHECKPOINT_CHANGE#
  ---------- ------------------
           1         7667692204
           2         7667692204
           3         7667692204
           4         7667692204
           5         7667692204
           6         7667727909
           7         7667692204
           8         7667692204
           9         7667692204
          10         7667692204
          11         7667692204
          12         7667692204
  
  12 rows selected.
  

  And to note now that even if the END BACKUP command has been issued, the data files remain in exactly the same state that they were ahead. File 6 is always out of sync with all other files. No additional control points have been issued, and nothing further happened to produce 6 or anything else to do things to re - sync.

  Put a tablespace IN backup mode hot indeed causes a control point will take place for this table space. But out of hot backup mode does NOT work. The SNA in the headers of this tablespace will be re - synchronize the next time there is a checkpoint of the whole system, but not until then.

  So no, it's NOT ' updated when we take tablespace in backup mode using online redo log files "-Although the syntax of this sentence is so weird as to defy rational explanation and require pure conjecture.

  As for questions of the original poster, so:

  I just want to know where the DML activities occur when the tablespace mode backup how to get updated records? why there are no changes in the SNA? why there is excess redo generation compared with the normal DML region?

  1 DML activities occur quite normally. Put a tablespace in backup mode hot stops CKPT update its header, but does absolutely nothing to prevent your server to update another process the contents of the file. If you update every row to a million lines of table during a hot backup of the repository containing this table, each row is updated, exactly as he would have done if no hot backup took place. It is not property of a backup hot, after all, if the content data file was unflappable frozen for the duration, would it?

  2 there IS a change in the SCN when you put a tablespace in mode backup hot. See above. When you exit the hot backup mode, there is no special update for the RCS... but the next time that all the headers of data file are updated through a checkpoint at the system level (caused by things like a log switch or the ADMINISTRATOR requesting a) , then the header will be updated with the SNA as all the other data file headers.

  Get some more: this is the checkpoint change the number that is stored in the headers of data files, and it is that which does not change during a backup hot. Number of system change, including change of control point number is simply a snapshot at a point in time, increases continuously throughout the system, all the time.

  3. in a user managed backup, it's the operating system that copies things and it copies the things that the operating system is aware of--such as the "operating system block', which is commonly size of 512 bytes. An Oracle block consists of several operating system blocks (16 in the case of a block of 8 K and blocks of 512 bytes OS). Oracle knows 16 blocks BONE to form a block Oracle; the operating system itself has no idea of their interdependence.

  Therefore, the silent operating system will copy one of these 16 blocks at any time as seems it, because he realizes that if it copies one, she really should to copy other 15 institutions. If it were a cold maintained by users of backup, which is not serious, because nothing would be happening to all the 16 blocks of BONE, and as long as it took the BONES to copy all of them, the result would be the same, as if all 16 had been copied at the same time.

  But it's a hot backup, it happens at these blocks. Therefore, it is possible for the operating system to copy, say, three of them, just at the moment where Oracle is about to change one of its blocks with an update or insertion. Three blocks of BONE thus copied in one State and the other thirteen OS blocks copied in another State. You now have a block of 8K in a backup that is internally in all directions and totally unusable. It's called a cracked block, and that's what happens when a single entity (BONE) copy unconscious things the importance invested in this is it the copy by another (the Oracle database).

  The cure for a broken block is to have a clean block copy as it was before the updates that happened to her. This clean copy of the block, you can apply all redo them later generated who touched it. So it is what guarantees Oracle exist. If a tablespace is in hot backup mode, the first update that is subject to change an Oracle block causes this whole block to write in it again connects. There's your own copy. The copy that creates the backup operation is the copied data file can now be fractured or not as chance allows: he'll always be a good version of it stored in the recovery logs.

  However, an update that generated usually 200 bytes redo just caused all of a block of 8K to copy in the redo logs. And this increase in the generation of redo is a feature of backups maintained by users (and why you should use RMAN).

• The user managed backup hot via Sql

  Hi being a little old school - I'm trying to understand the steps required for a Hotbackup managed through Sql (sorry fans RMAN!)
  
  I understand that I can save each tablespace in turn (via the necessary ALTER TABLESPACE < x > BEGIN BACKUP and then out of backup)
  I also assume that I simply take a backup of my control file (wither in binary form or trace if necessary)
  I also assume that you do not back up the Redo Logs (since you reset draw on any recovery anyway)
  
  The bit I'm not sure of is the Undo Tablespace - can be backup in eactly the same way as any other tablespaces?
  
  Y at - it all components that I need backup (outside the archive logs)
  
  Thank you
  Jim

  Always provide the Oracle version 4-digit.

  The documentation covers all of the steps required for a manual backup.

  http://docs.Oracle.com/CD/B28359_01/backup.111/b28270/osbackup.htm#CEGJIHJF

  See Chapter 27 Making User-Managed database backup for instructions.

• PREINST2. File management of stormwater is absent during the procedure of recovery on Satellite A300

  Hi my name is Khaled. I live in Toronto, Ca.

  I bought the toshiba laptop A300 3 months back and made recovery DVD same time :-)
  But I faced a problem and tried to make recovery and I erased all the data after backup, but everything using my 1st DVD I made in the face of a problem as PREINST2. Stormwater management file is missing after about 12 minutes.

  My DVD is brand new without any scratches.
  Also during the creation of recovery disks, there is no question, he got 100% successful.

  What can I do now?
  I need the laptop in my very urgent studies and his...
  I left the message on the 1-800-Toshiba also, but got no response :-(

  Help me
  u can reply here and to send on [email protected]
  thnx

  Hello

  Have you tried to use the HARD drive recovery process (if possible)?

  Press F8, all laptop power on. Choose fix my computer.
  Then a new window will open. Then you could start the HARD drive recovery.
  But this will be possible only if HARD disk recovery file has not been changed.

  If HDD recovery is not possible, I recommend that you format the disk with a Windows XP CD.
  Then try to boot from the recovery DVD Toshiba again.

  Check it out

• The User Manager window problem

  Hello

  I am ti connected TestStand as administrator, but the 'User Manager' window is prepared I can't acess.

  Can you help me please

  TestStand 13.0

  
  

• 3110em: HP recovery partition exists, but the recovery of the system in the grayed out Recovery Manager?

  I have a hp recovery partition on my laptop, and I want to recover my PC.

  I go into the Recovery Manager, windows system restore is available, but the HP system recovery is grayed out and unavailable.

  I don't know what to do, is partition recovery for windows 7, but since I upgraded to Win8.1, I had a lot of problems, and I want to go back.

  Please help me if you can.

  The system recovery option means that it seems to be corruption or another problem with the score of recoveryt.

  As is the case, then you would use the recovery (USB or a game disc) media, you have already created to perform the recovery.

  If you have not created a recovery media, you will need to order a recovery USB stick (preferably) or a record of recovering HP or HP partner. The cost is usually about $30,00 USD

  Order a HP recovery disk

• The issue of reduced Image recovery?

  So I tried to do a reset of my HP envy m6 - but the option is not available in the HP Recovery Manager and the reduced image recovery seems pretty well exactly the same (I have no need of trial or games) - my problem is, however, with the recovery partition.

  Will be the recovery of the reduced image delete all partitions and reinstall partition recovery (and os) - because I'm fine with that.

  Or do I have to specify not to remove the recovery partition?
  Or not make a choice, and I can just save the recovery partition?

  Thanks for any help you can provide!

  Hello

  Please check:

  

• ERROR: You don't have the right of user manage auditing.

  I copied the files on my computer to work on a USB device using robocopy. When I try to use robocopy to copy these files the USB device on my computer at home I get the following error message; "ERROR: you do not have the right of user manage audit."

  How can I get this error message and copy the files?
  Thank you

  I'm glad that you were able to understand. Thanks for sharing your solution. In Windows Vista and Windows 7, even if your user account is an administrator (and this is not optimal, see why below), you still need to raise the true administrator to make global changes. In your case, that would by running high cmd ("run as Administrator").

  User - recommended configuration (Vista and Win7) accounts

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista and Windows 7 are OS multi-user with system built-in accounts such as administrator, by default, all users and guest. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want account only one user with administrator privileges on Vista and Windows 7 because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it will take third-party tools and work outside the operating system.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null). MS - MVP - Elephant Boy computers - don't panic!

• If the user accesses the server accidentally deleted the folder how recovery

  If the user accesses the server accidentally deleted the folder how recovery

  Hi AmjadPasha,

  If you are referring to a local file, you can check the trash.

  If you are referring to a network share, then there is very little that can be done.

  You can try using recovery software/services of third parties to retrieve the file.

  You can use your favorite search engine to search for third-party software.

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information is useful.

• Cisco SRP527w cannot find the user management tab

  Hello

  Can someone help me? I just bought a new Cisco SRP527w and I'm all new to this type of material. I can't find the tab for user management that I'm changing the default password.

  Also, I can't access the internet. My rj45 of the ADSL modem is connected to the WAN/LAN port with parameters IP static. What missed here? your help is very appreciated.

  Hi Ronald, if you are clicking on all other tabs and it still seems only the setup of the wizard, you must change your internet browser. Try Firefox or IE. This should solve that.

  -Tom
  Please evaluate the useful messages

• I got following message from the installation program Adobe - other instances of running Applications Adobe Manager that must be closed before you install this product. Please close or wait until they end. Please indicate how can I resolve the issue?

  I got following message from the installation program Adobe - other instances of running Applications Adobe Manager that must be closed before you install this product. Please close or wait until they end. Please indicate how can I resolve the issue?

  Please check if this helps https://helpx.adobe.com/creative-suite/kb/error-instance-updater-running-cs5.html

  Concerning

  Stéphane

• What ports needed to catalog and the business of Recovery Manager

  I have a server I have the Enterprise Manager configuration and recovery catalog on.  I have another server I want to manage.  The part of business manager seems to work very well, I was able to start the agent on this server and promote it.  But when I create the backup job and then try and tell him to use the catalogue of recovery I get a tns error, I think it's really a problem with my firewall.  I'm trying to find out what ports I need to open for the catalog recovery and Enterprise Manager to work.  That's what I have now.

  Ctlg Rec / EM Svr - all ports open-> Svr2

  Ctlg Rec / EM Svr < - just the port 4899 - Svr2

  4899 is the agent of the EM.

  Can I also open Svr2 1521 port to my Rec Ctlg / Server EM?  Or all other ports?

  2 server needs to connect to the catalogue of recovery via the TCP port that you define in the earpiece of your recovery catalog server.

• prompt (Functions) are not displayed in the user management responsibility

  Hello
  
  EBS 12.0.3
  
  I added the responsibility of user management with my user application it shows not all prompt (functions) that it is empty, while the sysadmin user's show.
  Kindly answer me.
  
  Thank you

  You have assigned the role of "security administrator" for the user and see if that helps?

  Thank you
  Hussein

• Available attribute schema ldap for the OAM User Manager

  Hi people,
  
  I need view the attributes of ldap multi-value (no objectClass) schema in the OAM User Manager. Somehow, only a handful of attributes are visible. When I go in the Console System identity, User Configuration Manager, tabs, users, change attributes, the attribute that I need isn't on the list.
  
  Any help is appreciated.
  Thank you, novel

  Hi Roman,

  Not quite, the method would be:

  1. create the new object defined by the user (such as auxiliary)
  2. only add additional attributes (besides the ones I see already) I need to display in the user for it to a schema Manager
  2.5 identity restart them
  3. in common Config OAM, add this object (hopefully)
  4 Add attributes to control panel users

  For step 1, I don't know how to create an auxiliary object class in the Sun Java Console (I'm not saying that this is not possible, it's just that I don't know the method). Another method is to create an objectclass to an ldif (which also gives you a permanent record of the objectclass) and you can use the files identity, oblix, data, common identity as a model for this server directory. For example, consider the file iPlanet_oblix_schema_add.ldif and look for the oblixorgperson entrance, which looks like:

  DN: cn = schema
  ChangeType: modify
  Add: identifiers
  identifiers: (1.3.6.1.4.1.3831.0.1.13 NAME 'oblixorgperson' DESC 'Oracle Access Manager defined objectclass' SUP top AUXILIARY MAY (obuiconfig $ oblocationdn $ obrectangle $ obpsftid $ obdirectreports $ obindirectmanager $ obuseraccountcontrol $ obobjectclass $ obver $ oboutofofficeindicator))

  You can create your own auxiliary objectclass use this as a template.

  Hope it makes sense.
  Colin