The utility 'Open GPU' button is not available.

Similar Questions

• My internet connection laptop keeps dropping out. This utility solves temporarily, saying the default gateway of something is not available.

  My internet connection laptop keeps dropping out. This utility solves temporarily, saying the default gateway of something is not available. How can I permanently?

  Hello

  1. who is the operating system installed on your computer?

  2. are you using a cable or a wireless Internet connection?

  3. were there any changes or updates made on the computer?

  4. what store did you try?

  Follow the steps mentioned below and check.

  Method 1: I suggest you to return the item and check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  You can try resetting WINSOCK, TCP/IP IPv4 and IPv6 TCP/IP stack.

  a. Click Start and in the search box, type cmd.

  b. right click on command prompt, select "Run as Administrator" to open a command prompt.

  c. at the command prompt, type the following commands:

  netsh winsock reset catalog, which resets the WINSOCK entries to the default installation

  netsh int ipv4 reset reset.log that resets the stack TCP/IP IPv4 default installation

  netsh int ipv6 reset reset.log resets the IPv6 TCP/IP stack by default installation

  d. restart the computer.

  Method 3:

  Reset the default router by pressing the reset for 15 seconds with power button.

  a. turn off the modem, the router and the computer.

  b. connect the modem to the WAN/Internet port on the router.

  c. connect the computer to one of the router's LAN/network ports.

  d. turn on the modem, wait for triggering connect light.

  e. turn on the router, wait two minutes.

  f. start the computer.

  g. when the computer is completely loaded, check if the problem persists.

• How to restore the new tab button in the navigation menu when it is not available in the Customize?

  The new tab button disappeared from my navigation menu. None of the changes or upgrades have been made. While all subjects of support suggest going to customize the toolbar, the new tab button is gone either. There in the morning, disappeared in the evening without apparent reason. The + is at the end of the series of tabs, but not in the navigation toolbar and tab add + is NOT anywhere on a page it there is that a single label. I HIDE TAB BAR WITH ONE TAB 1.1 but have had for weeks, and the new tab button was always there. How to restore the button tab on the Navigation bar if it is not available in the choice to customize the toolbar?

  Don't you see the new tab button on the tab bar if you open the window customize?

  If you do not see an item on a toolbar in the toolbar palette and then click the button "Restore default" to restore the default toolbar configuration

  You can check the problems caused by a corrupt localstore.rdf file and try to delete this file.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• have just updated version of acrobat reader dc.  acceptance of warranty/disclaimer button is not available.  How can I accept to activate the software

  Update acrobat reader dc. acceptance of warranty/disclaimer button is not available.  How can I activate and accept?

  Hello

  I ask you to go through the following steps a link once and see if that helps.

  Do not click on accept. Acrobat, Adobe Reader

  Concerning

  Sukrit diallo

• Introduce the tool button is not available for a question slide

  When I try to insert a button using the "Insert button" icon from the toolbar, the icon "Insert button" is not available. It happened in the background and is not an option for this slide. But it is for my other slides. Can someone advise me please? I don't know what happened, but let's assume that I've done something wrong along the way.

  Thank you!

  Scott, if you look a little closer at the Lynda tutorial, what happens is that they have set up an action if the user has not replied to the question correctly. The action led them to a slide in the presentation. Note that the blade they edited after the fact (it was slide 5) was a typical shift, NOT a question slide. Thus, the option was there to insert a button.

  See you soon... Rick

• The August 2012 calendar items are not available in the calendar of the modern user interface application

  The August 2012 calendar items are not available in the calendar of the modern user interface application.  They are available through a web browser and the application MS Office Outlook.  Y at - it a setting or another way to access old calendar items in the modern user interface.  The phone application has the same problem.

  Original title: elements of August 2012 calendar

  Hello

  I suggest for the link and run the troubleshooting utility Apps and follow the other steps in the article:

  What to do if you have problems with a soft

  http://Windows.Microsoft.com/en-in/Windows-8/what-troubleshoot-problems-app

  See also:

  Application of calendar for Windows: FAQ

  http://Windows.Microsoft.com/en-in/Windows-8/calendar-FAQ

  Stay in touch with email and calendar

  http://Windows.Microsoft.com/en-us/Windows-8/mail-calendar#1TC=T1

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• I try to import bookmarks (Favorites) in IE, but when I go to 'file' as the direct instructions, 'import' option is not available for select (it shows only weakly and won't answer). What now?

  Carefully, I tried to follow the instructions to import IE Favorites, as it appears in Firefox "Help". The choice of 'import' is simply not available under 'File', as it is supposed to be.

  This happens if you're in private browsing mode. For more information on how to get out of the private browsing mode, see https://support.mozilla.com/kb/Private+Browsing

• Error message "revocation information for the security for this site certificate not available. Do you want? [Yes] [No] [View the certificate]

  For awhile, I got the dialog box with «security alert "revocation information for the security for this site certificate not available.» Do you want? [Yes] [No] [View the certificate] ". » I know that many, if not all, sites are OK because I used them several times in the past.

  I tried different "fixed" found by Google "revocation information" and nothing solves the problem - what is.

  When I try to make various updates, not related to this problem, I can not download updates due to a security problem.

  Suggestions for a computer challenged the user? Thank you.

  Richard

  http://www.brighthub.com/Internet/Security-Privacy/articles/82291.aspx

  read this, see if he can address your question.

• Clip the Firmware Zip: "Update Service is not available"

  Hi all...

  I just bought a Zip Clip 4 GB (I am a user of the two Clip & Clip + since 2008) and I have the static distortion between the tracks that I've read here.

  However, when I try to update the firmware, I get the following message: "Update Service is not available.

  Any suggestion or help is appreciated.

  Thankies

  So nevermind, lol... I'm too tired to do that today.  Figured it out.

• After I close my browser IE 9 and return to the office, my office programs are not available.

  After I close my browser IE 9 and return to the office, my office programs are not available. I have hover over a program and click, nothing happens for a few minutes... On the other hand, the taskbar and toolbar are all functioning normally. No other problems seem to be present.

  Thank you.

  Original title: freezing of funds

  Hello Manu,

  Thanks for the guidelines to help me solve my problem. Just to tell you that no, I have no error messages when I tried to access the office programs and Yes, I made a few changes in the pc... in the registry with Glary Utilities. That was my main concern.

  However, I tried the AUDITOR of FILE SYSTEM (CFS) and it fixed some problems.

  I also watched method 2 and did a performance using MICROSOFT FIX patch and ran that the Microsoft SECURITY SCANNER both have not reported any problems.

  Also tried method 1, no problem in safe MODE. I didn't think it was a third party program... so I decided to do a restore to an earlier date... then the problem seems to have disappeared.

  Start the pc also seems to be much faster.

  Thanks for the suggestions... I'll keep them as reference just in case...

• Epson Workforce 345 while a printer does not print. message that the local print spooler service is not available and I need to restart the spooler.

  All of a sudden my Epson Workforce 345 all-in-one printer will not print.  I get a message that the local print spooler service is not available and I need to restart the spooler.  What does that mean?

  Hello

  Check with the manufacturer of the printer for updated drivers, support and Forums for
  known issues.

  Check with Epson support, their documentatiion online and drivers. As it's Epson OEM
  responsible for the proper functioning of the printer and their drivers provided.

  If there is that no Windows 7 drivers try the Vista drivers if those that exist.

  Epson - Support us.
  http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=Yes

  Epson - support from Europe
  http://www.Epson.co.UK/support

  ===============================

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  Follow these steps in the kind of prerequisites:

  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ------------------------------------------------------

  References to Vista also apply to Windows 7.

  Go to the printer manufacturer's website and get the latest drivers - download - REGISTER - install yet. When loan
  to install - make a right-click on the pilot - run as administrator.

  Also check with your support and the Forums printer manufacturer.

  --------------------------------------

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------

  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - devices and printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Windows 7
  http://www.blackviper.com/2009/01/13/black-vipers-Windows-7-service-configurations/#more-2989

  Windows 7 Service Pack 1
  http://www.blackviper.com/2010/12/17/black-vipers-Windows-7-Service-Pack-1-service-configurations/

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Error: Could not generate the code to activate one or several web fonts on the 'Home' page [Error 400: font not available]

  Good afternoon

  I hope someone can help me.

  I use Lato standard on my site. I donloaded the police, it is installed. But when I try to publish the site on businesscatalyst I get this error after 13%

  Error:

  Could not generate code to activate one or several web fonts on the 'Home' page [Error 400: font not available]

  I do not see the police, please see the attached file.

  Can someone tell me what I have to hurt.

  Thank you

  Hello Dutchybert,

  You must ensure that you do not use any other font on the page. You can use several fonts but not missing fonts.

  There is probably a box/image/text that you forgot to change the font.

  Be sure to use web fonts that are in your font library.

  I hope this helps

• I would like to know what are the characteristics of the trial version of Illustrator are not available for use

  I would like to know what are the characteristics of the trial version of Illustrator are not available for use

  Normally there are no differences in features between the facilities of the trial and will enjoy

• try to install adobe cc but the sons of site Web to: not available in your country (the Netherlands)... wtf

  try to install adobe cc but the sons of site Web to: not available in your country (the Netherlands)...

  anyone understand this?

  I use the latest mac pro, ox X el capitan...

  Creative cloud is available in the Netherlands, as you can see here:

  http://www.Adobe.com/content/dam/Adobe/en/products/creativecloud/CC/PDFs/CC-availability-m atrix.pdf

  If you do not live in the Netherlands, then your Adobe ID can be associated with the wrong country.

  Please note that the country of your payment address, the country on your Adobe account and the store you purchase of should be the same.

  Please see this link for more information:

  FAQ: How can I change the country associated with my Adobe ID?

• The tablet version is after publication not available on the ipad.

  The tablet version is after publication not available on the ipad. The ipad still displays the computer version. I missed something?

  You can check this with several browsers or the problem is only with the specific browser or only with the iPad?

  Please, try the suggestions listed here:

  https://forums.Adobe.com/thread/1126831

  If still the same issue, provide the url of the site.

  Thank you

  Sanjit