The version latest does support my time zone on ebay yet?

Similar Questions

• The unit 3.1 (6) server time zone

  The unit 3.1 (6) server time zone is GMT - 5 Eastern time currently, will change the local Caracas GMT-4, which affect the unity Server? has no problem for the voice message timestamps?

  Thank you

  The unity server time zone is used for subscribers that have been left to 'use default' for their time zone (which is the default setting for new installations). So if you change the time zone on the server of the unit this time zone is used when Express stamps for subscribers.

  If a Subscriber is set to a specific time zone, already, this change has no effect.

• The last version, 23, does support the Roboform toolbar?

  I use my ROBOFORM toolbar every day. If I switch to Firefox 23 going to work again?

  I use the Version of RoboForm 7.9.0.0 and works very well with FireFox 23.0.1

  No problem

• A question about the insertion of the localTimeStamp returned the value into a timestamp with time zone column

  Hello

  Oracle version: Enterprise Edition Release 12.1.0.1.0 - 64 bit

  OS: CentOS 4.6 X86_64                  

  I have a question about the localTimeStamp function. According to the documentation for this function is
  the same thing as current_TimeStamp except that the returned value does not include the time zone.

  Consider the following example:

  SQL > create table tmptab (colval timestamp with time zone not null);

  Table created.

  SQL > insert into tmptab (colval) values (localTimeStamp);

  1 line of creation.

  SQL > select t1.colval, tmptab from t1;

  COLVAL

  ---------------------------------------------------------------------------

  24 JANUARY 14 09.45.42.253732 H + 01:00

  SQL >

  Why introduce the foregoing did not fail? the data type of the column in my table colval expects a timestamp with time zone

  during each which inserts as I understand (correct me if I'm wrong) is not provided by the localTimeStamp function.

  Could someone kindly tell me what I misunderstood?

  Thanks in advance,

  dariyoosh wrote:

  Hello

  Oracle version: Enterprise Edition Release 12.1.0.1.0 - 64 bit

  OS: CentOS 4.6 X86_64                  

  I have a question about the localTimeStamp function. According to the documentation for this function is
  the same thing as current_TimeStamp except that the returned value does not include the time zone.

  Consider the following example:

  SQL > create table tmptab (colval timestamp with time zone not null);

  Table created.

  SQL > insert into tmptab (colval) values (localTimeStamp);

  1 line of creation.

  SQL > select t1.colval, tmptab from t1;

  COLVAL

  ---------------------------------------------------------------------------

  24 JANUARY 14 09.45.42.253732 H + 01:00

  SQL >

  Why introduce the foregoing did not fail? the data type of the column in my table colval expects a timestamp with time zone

  during each which inserts as I understand (correct me if I'm wrong) is not provided by the localTimeStamp function.

  Could someone kindly tell me what I misunderstood?

  Thanks in advance,

  Then, when you do

  create table t (neck DATE);

  Insert into t (to_date ('1st January 2014', ' mon-dd-yyyy "");)

  Are you surprised that it works? After all a DATE column contains a time component, you do not provide: but he

  works and gives you 00:00:00 as the component "hour".

  Similarly, the timezone component is being developed to automatically with, I think, time zone of your system.

• HP Envy 700-214: the HP Envy does support the 750 Ti FTW Evga GTX edition?

  As the title suggests, the edition of 750 Ti GTX FTW Evga does support my office? I am currently engraged by the integrated graphics card because I can't run games on the settings I want and instead I have to stay with the lowest settings. I don't know if my BIOS version is supported by the card. I have again the dinky power came with the computer and if someone can tell me if it has the connector 6 - pin PCIE, which would be lovely. Also, it would be great if someone showed me a picture of the 6-pin PCIE if there. I thank you for reading, have a nice day!

  Hello

  Your PC should be able to support the NVIDIA GTX 750.  Generally the NVIDIA GTX 750 with a few exceptions only requires a 300 Watt power supply.

  HP 460 watt power supply has a PCI-E power connector 6 pin.

• Newspapers of Skype on Mobile and on the version of office at unexpected times

  Hello

  My Skype disconnects always unexpected,

  on the mobile version just after I login... 2-3 seconds more later Im disconnected automatically

  on the version (tested on win7 and win8) desktop after a few minutes, or suddenly in the middle of a call.

  Can someone suggest me a solution? It is not my hard or software. I use Win 8.0 installation.

  And I'm on LG G2 with android 4.0. on a new phone.

  Thank you in advance!

  Bert

  PS: Sorry if this isn't the right section of the forum, was not sure where this post because it is a question of platform multi with my account.

  If your Skype account is bound with the Microsoft account, then try to separate them.

  https://support.Skype.com/en/FAQ/FA12211/how-do-i-unlink-my-Skype-and-Microsoft-or-Facebook-accounts

• The card reader memory 15 one in the e9250t Elite does support the SDXC memory card

  The card reader memory 15-one in the Desktop Elite e9250t does support the SDXC memory card?

  What memory SDHC card?

  That is a good question. Is there a part number on the memory card reader?

  Theuser guide provides the following information only.

  Make sure that the memory card is one of the types supported:
  CompactFlash (I, II, and Microdrive), Memory Stick, Memory
  Stick Pro, MultiMedia, Secure Digital, SmartMedia, or xD.
  Some models may support additional types, such as the SDHC
  (Secure Digital high capacity) memory cards

• The Switch 10 does support UHS?

  Hello

  I'll buy an Aspire Switch 10 soon, and in anticipation of this, I was going to buy a 64 GB microSD for her. I was wondering whether or not the Switch caught 10 supported UHS speed class. I looked at the manual of the product online, but it does not specify the speed supported class. As the site mention UHS speed class support or the manual, I guess he can't stand not SURE. But, I thought that I would tender hand to the community to see if someone had knowledge of this. =)

  Thank you!

  spiffus,

  Two of these systems list the drive just MicroSD card. The 271 - SW5 shows that it supports SDXC, which will read the UHS cards, but not run at this speed. If I understand the compatibility.

• The switch SLM224G does support VLAN per port?

  I'm looking for a simple solution create two LAN. One for my own and the other for my clients, who will be able to use the desktop computer with internet access. I only have one internet connection (ADSL over ISDN) and wil not get another just for my clients.

  My own network should not be accessible or visible to users who use the PC clients. The other way around is authorized, but not really necessary. My setup requires me to connect to the switch to the (ISP) router, and the router has a LAN port not able to do anything related to VIRTUAL networks.

  I read on the VLAN port to put here, where it is stated that creating separate LAN is just the ports in VLANS on the switch, nothing else to do... However, they used a NetGear smart switch.

  I checked SLM224G of Cisco because it is affordable, has 24 ports (instead of 8 for the NetGear) and must support of VLAN. I read a lot about VIRTUAL networks, including:

  «- Means the VLAN per port that you can reconfigure the ports to be in different VLANS.» VLAN per port does not confirm the 802. 1 q supported VLANS.

  -802. 1 q VLAN means you can mark the VLANS with 802. 1 q headers to create a trunk between two devices carrying frames for several VLAN. 802 1 q VLAN confirms that there are also supported VLAN per Port. »

  I knew by the sheets that the SLM224G supports 802. 1 q (tagged) trunking. So it should be, given the text above, also supports VLAN per port.

  My question is if it indeed will support VLAN per port?

  I am able to use it directly behind the router of my ISP and create two separate LAN?

  If so, a supplementary question: how are the PC behind the switch (inside the two VLAN) removes the ISP router IP addresses? It will serve only of the two LAN or do I have to install a DHCP server in the other LAN?

  Any information is welcome!

  Thank you.

  Mr. Bertrand,

  
  

  I read what you posted and I don't think the slm224g will do what your configuration you want to.  The reason behind all this, if you have installed 2 VLAN you will need 2 gateways for each network.  Since then just the ISP router and a network.  I'd get a router capable of VLANs and plug it into the router of the Internet service provider and then you can have up to 4 networks behind your router.  The rvs4000 is a router excellent gigabits, which supports up to 4 VLANS.  So if you need additional ports, you can get unmanaged switches and plug it into the router for added ports.

• The a58 SLT does support UHS - I?

  Hello

  I wonder if the a58 will use a UHS - I card quick or if it will be limited to 25 MB/s as base SDXC readers. What I found the a57 and a65 do not support UHS - I so that the do a77 and a99. What of the a58 motorway?

  Thanks in advance

  The SLT - A58 does not support the use of UHS-I accelerates, but a UHS-card I can always be used with the camera.

  If my post answered your question, please mark it as "accept as a Solution.

• The Deskjet 1051 does support Linux?

  Hello

  The Deskjet 1051 does Linux support via the HPLIP software? I bought this printer. Thank you very much.

  As far as I now, this should work, the F behind the product number is just the specific productnumber to the 1051, then j410 indicates a 1050 and j410f a 1051.

• The Z3 Xperia does support MirrorLink?

  Does anyone know if the Xperia Z3 supports MirrorLink?

  I have a central unit with radio xav-602bt and would like to know. Currently I have the Xperia Z which works very well. The list of compatible phones website said the job of Z1 and Z2, but I don't know if the site should just update or if in fact the Z3 is simply not supported!

  According to the Z3 manual, it has mirror link

  http://Userguide.sonymobile.com/referrer.php?region=SG&product=Xperia-Z3#! Connecting-your-car-help-...

• The router RSV4000 does support multiple public IP addresses

  I have a client who has a RSV4000 router. The customer also bought a block of 5 usable public IP addresses. I need to be able to assign these public IP addresses for printers, either by configuring a static IP address on each printer directly or through mapping of intellectual property or any other method. Made support for RSV4000 using several treats public IP and if so what configuration is required in the router for printers to be seen by the outside world.

  Hi Winston,

  Thank you for posting. The functionality you need is one-to-one NAT, who does not have the RVS4000. Please watch the RV042 or RV220W for this feature.

• The PXI-8512 does support the series 2 filter or a similar mechanism to filter the messages?

  Hello

  I need to buy a couple of cards CAN interfaces for my test application and I wonder what you choose

  I already used a PXI-8461 to obtain data of the customer model under test, and due to the fact that sometimes the client bus can be very busy, but most of the messages is not interesting for my system that I use currently series 2 comparator/mask/filter to filter only the interesting messages.

  Without this filter, the PXI-8461 often returns an error due to overloading of the bus. With the filter, everything works perfectly

  Now I need to implement several testbeds with this same feature, and I plan to move to the new PXI-8512 for new.

  My question is: is the most recent PXI-8512 a device series 2 institutions? Support the filter 2 series or any other mechanism to avoid problems on the busy bus?

  Thank you for your support.

  Kind regards

  Davide

  Hi Davide.

  the PXI-8512 isn't a series 2 device. The PXI-8512 is a device of the X-NET family. X-NET is the technology whose use OR in support of CAN, LIN and FlexRay with a driver API. Series 2 devices use the former NI-CAN driver that only supports the CAN. All of the new devices are devices X-NET.

  Take a look to the following document:

  NI-CAN for NOR-XNET application migration
  http://www.NI.com/white-paper/9717/en

  On this page you will find the following statement for the function that you are already using:

  Transceiver filters were traditionally indicated for applications where only a few CAN IDs have been considered on a bus high load. In some cases, material NI-CAN support the bandwidth of the full bus, which leads to a buffer overflow. The hardware architecture OR XNET uses the engine NOR-XNET DMA-driven to eliminate the occurrence of buffer overflows. CAN of NOR-XNET interfaces are able to handle high load bus and transmitting at the maximum rate without coupling to buffer overrun. If your applications use the hardware filters extensively, NOR recommend setting up CAN opposes, or by reading the bus while using Network Interface objects. The best option for these applications is to modify your code to use the API OR-XNET native.

  Best regards, Stephan

• The PCI-6052e does support I2C or SPI communication?

  Currently, I am trying to build a data acquisition system to test, among other things, SPI and I2C devices verification of characteristics and surveys of behaviour without advertisement above the different temperatures.  The DAQ card that I use is the PCI-6052e as well as the SCB-68.  It has 8 ports DIO, but can someone tell me if it will support SPI or I2C?  Another post in the forum indicated that it will not support 16-bit SPI, but for my application only 8 bit is necessary.  I am not opposed to research in other materials DAQ, such as the USB-8451, but would like to see if the 6052e can do the job first.  If she can't, then my next question would be; Can the 6052e and USB-8451 operate in parallel which allows me to use both analog and digital functionality?  Thank you

  If you will try little he hit then you might find these links useful:

  • SPI digital waveforms reference library
  • Protocol series Communication design reference for devices of digital signals