The PCI-6052e does support I2C or SPI communication?

Similar Questions

• HP Envy 700-214: the HP Envy does support the 750 Ti FTW Evga GTX edition?

  As the title suggests, the edition of 750 Ti GTX FTW Evga does support my office? I am currently engraged by the integrated graphics card because I can't run games on the settings I want and instead I have to stay with the lowest settings. I don't know if my BIOS version is supported by the card. I have again the dinky power came with the computer and if someone can tell me if it has the connector 6 - pin PCIE, which would be lovely. Also, it would be great if someone showed me a picture of the 6-pin PCIE if there. I thank you for reading, have a nice day!

  Hello

  Your PC should be able to support the NVIDIA GTX 750.  Generally the NVIDIA GTX 750 with a few exceptions only requires a 300 Watt power supply.

  HP 460 watt power supply has a PCI-E power connector 6 pin.

• The card reader memory 15 one in the e9250t Elite does support the SDXC memory card

  The card reader memory 15-one in the Desktop Elite e9250t does support the SDXC memory card?

  What memory SDHC card?

  That is a good question. Is there a part number on the memory card reader?

  Theuser guide provides the following information only.

  Make sure that the memory card is one of the types supported:
  CompactFlash (I, II, and Microdrive), Memory Stick, Memory
  Stick Pro, MultiMedia, Secure Digital, SmartMedia, or xD.
  Some models may support additional types, such as the SDHC
  (Secure Digital high capacity) memory cards

• The Switch 10 does support UHS?

  Hello

  I'll buy an Aspire Switch 10 soon, and in anticipation of this, I was going to buy a 64 GB microSD for her. I was wondering whether or not the Switch caught 10 supported UHS speed class. I looked at the manual of the product online, but it does not specify the speed supported class. As the site mention UHS speed class support or the manual, I guess he can't stand not SURE. But, I thought that I would tender hand to the community to see if someone had knowledge of this. =)

  Thank you!

  spiffus,

  Two of these systems list the drive just MicroSD card. The 271 - SW5 shows that it supports SDXC, which will read the UHS cards, but not run at this speed. If I understand the compatibility.

• The switch SLM224G does support VLAN per port?

  I'm looking for a simple solution create two LAN. One for my own and the other for my clients, who will be able to use the desktop computer with internet access. I only have one internet connection (ADSL over ISDN) and wil not get another just for my clients.

  My own network should not be accessible or visible to users who use the PC clients. The other way around is authorized, but not really necessary. My setup requires me to connect to the switch to the (ISP) router, and the router has a LAN port not able to do anything related to VIRTUAL networks.

  I read on the VLAN port to put here, where it is stated that creating separate LAN is just the ports in VLANS on the switch, nothing else to do... However, they used a NetGear smart switch.

  I checked SLM224G of Cisco because it is affordable, has 24 ports (instead of 8 for the NetGear) and must support of VLAN. I read a lot about VIRTUAL networks, including:

  «- Means the VLAN per port that you can reconfigure the ports to be in different VLANS.» VLAN per port does not confirm the 802. 1 q supported VLANS.

  -802. 1 q VLAN means you can mark the VLANS with 802. 1 q headers to create a trunk between two devices carrying frames for several VLAN. 802 1 q VLAN confirms that there are also supported VLAN per Port. »

  I knew by the sheets that the SLM224G supports 802. 1 q (tagged) trunking. So it should be, given the text above, also supports VLAN per port.

  My question is if it indeed will support VLAN per port?

  I am able to use it directly behind the router of my ISP and create two separate LAN?

  If so, a supplementary question: how are the PC behind the switch (inside the two VLAN) removes the ISP router IP addresses? It will serve only of the two LAN or do I have to install a DHCP server in the other LAN?

  Any information is welcome!

  Thank you.

  Mr. Bertrand,

  
  

  I read what you posted and I don't think the slm224g will do what your configuration you want to.  The reason behind all this, if you have installed 2 VLAN you will need 2 gateways for each network.  Since then just the ISP router and a network.  I'd get a router capable of VLANs and plug it into the router of the Internet service provider and then you can have up to 4 networks behind your router.  The rvs4000 is a router excellent gigabits, which supports up to 4 VLANS.  So if you need additional ports, you can get unmanaged switches and plug it into the router for added ports.

• The a58 SLT does support UHS - I?

  Hello

  I wonder if the a58 will use a UHS - I card quick or if it will be limited to 25 MB/s as base SDXC readers. What I found the a57 and a65 do not support UHS - I so that the do a77 and a99. What of the a58 motorway?

  Thanks in advance

  The SLT - A58 does not support the use of UHS-I accelerates, but a UHS-card I can always be used with the camera.

  If my post answered your question, please mark it as "accept as a Solution.

• The Deskjet 1051 does support Linux?

  Hello

  The Deskjet 1051 does Linux support via the HPLIP software? I bought this printer. Thank you very much.

  As far as I now, this should work, the F behind the product number is just the specific productnumber to the 1051, then j410 indicates a 1050 and j410f a 1051.

• The Z3 Xperia does support MirrorLink?

  Does anyone know if the Xperia Z3 supports MirrorLink?

  I have a central unit with radio xav-602bt and would like to know. Currently I have the Xperia Z which works very well. The list of compatible phones website said the job of Z1 and Z2, but I don't know if the site should just update or if in fact the Z3 is simply not supported!

  According to the Z3 manual, it has mirror link

  http://Userguide.sonymobile.com/referrer.php?region=SG&product=Xperia-Z3#! Connecting-your-car-help-...

• The router RSV4000 does support multiple public IP addresses

  I have a client who has a RSV4000 router. The customer also bought a block of 5 usable public IP addresses. I need to be able to assign these public IP addresses for printers, either by configuring a static IP address on each printer directly or through mapping of intellectual property or any other method. Made support for RSV4000 using several treats public IP and if so what configuration is required in the router for printers to be seen by the outside world.

  Hi Winston,

  Thank you for posting. The functionality you need is one-to-one NAT, who does not have the RVS4000. Please watch the RV042 or RV220W for this feature.

• The version latest does support my time zone on ebay yet?

  When I loaded the new version 10.0, it did not support "My Time Zone" in ebay. He says the latest version in this add on?

  You can force it to work on Firefox 10 using the add-on Compatibility Reporter:

  https://addons.Mozilla.org/es-ES/Firefox/addon/add-on-compatibility-reporter/?src=SS

• The PXI-8512 does support the series 2 filter or a similar mechanism to filter the messages?

  Hello

  I need to buy a couple of cards CAN interfaces for my test application and I wonder what you choose

  I already used a PXI-8461 to obtain data of the customer model under test, and due to the fact that sometimes the client bus can be very busy, but most of the messages is not interesting for my system that I use currently series 2 comparator/mask/filter to filter only the interesting messages.

  Without this filter, the PXI-8461 often returns an error due to overloading of the bus. With the filter, everything works perfectly

  Now I need to implement several testbeds with this same feature, and I plan to move to the new PXI-8512 for new.

  My question is: is the most recent PXI-8512 a device series 2 institutions? Support the filter 2 series or any other mechanism to avoid problems on the busy bus?

  Thank you for your support.

  Kind regards

  Davide

  Hi Davide.

  the PXI-8512 isn't a series 2 device. The PXI-8512 is a device of the X-NET family. X-NET is the technology whose use OR in support of CAN, LIN and FlexRay with a driver API. Series 2 devices use the former NI-CAN driver that only supports the CAN. All of the new devices are devices X-NET.

  Take a look to the following document:

  NI-CAN for NOR-XNET application migration
  http://www.NI.com/white-paper/9717/en

  On this page you will find the following statement for the function that you are already using:

  Transceiver filters were traditionally indicated for applications where only a few CAN IDs have been considered on a bus high load. In some cases, material NI-CAN support the bandwidth of the full bus, which leads to a buffer overflow. The hardware architecture OR XNET uses the engine NOR-XNET DMA-driven to eliminate the occurrence of buffer overflows. CAN of NOR-XNET interfaces are able to handle high load bus and transmitting at the maximum rate without coupling to buffer overrun. If your applications use the hardware filters extensively, NOR recommend setting up CAN opposes, or by reading the bus while using Network Interface objects. The best option for these applications is to modify your code to use the API OR-XNET native.

  Best regards, Stephan

• Why do my pci-6052e configured as traditional daq and daqmx in MAX?

  I have an old computer of three year with 1 GB of RAM and a 3.00 GHz running Windows Server 2003.  It has already been used for experiments of movement control and has a 7333 motion control card and a PCI-6052E.  Now all I want to do is sample data of a pressure sensor and a flow meter using the PCI-6052E, but for some reason, this card is configured in MAX as a DAQmx device and a traditional DAQ (Leagcy) deivce.  Unfortunately, when I write the LabVIEW 8.2 VI, the only available data acquisition tools are DAQmx and Max my two instruments are installed in traditional DAQ.

  If there is only one card PCI-6052E in the computer, why MAX card PCI-6052E called dev3 DAQmx and a card PCI-6052E dev1 in traditional DAQ?  How can I fix?

  Cpesko,

  I am happy here, you have a few things working under Windows Server 2003.  We do not however have any software under this OS except what is listed here.

  DAQmx and TDAQ are 2 different drivers and this is the behavior expected that devices that support both would be present in the title of each driver.

• Does support PCI Satellite A100-812 (PSAAR) standard MXM slot

  Hello

  I have a Satellite A100-812 at the moment and I was wondering if the PCI-e slot is 1 on the mxm standarts.

  And if so, could it be replaced by another graphics card, say a 8600M GT?

  Hi Marien

  The Satellite A100 does not support the MXM (Mobile PCI Express Module) interface and the graphics card or upgrade replacement is certainly not possible!
  The graphics card is fixed and welded on the map and you can not delete it!

  If you want you can use the advanced search option forum and could search for similar topics to this topic.
  But I guess that you will always find the same info that is; GPU upgrade is not possible

  Best regards and have a nice day!

• Verification of the I2C and SPI Timing features to 5, 5V to 1, 8V

  Hello

  I am trying to create a test setup that will allow me to characterize the sync settings for I2C and SPI bus on a part which cannot operate at 5, 5V to 1, 8V. I need to be able to characterize or at least test the limits of synchronization specified in all of the range full voltage.

  Can anyone recommend some equipment that can be used to achieve this?

  Thank you

  Tangent

  Tangent salvation,

  Imtiaz is right.  The 655 line HSDIO cards x supports the families of tension, you need and has very good temporal resolution.  In addition, there are I2C libraries available to us for the 655 x here: http://zone.ni.com/devzone/cda/epd/p/id/6080

  For more information on HSDIO cards, check here: http://www.ni.com/highspeeddigitalio/

  Thanks and good luck!

  Keith Shapiro

  National Instruments R & D

• I just bought an iPhone 4 and it's not let me download from the App Store because it says I need iOS 8 but the iPhone 4 does not support 8, how do I get apps?

  I just bought an iPhone 4 and now I can't download apps from the App Store because it says I need iOS 8 but the iPhone 4 supports ios 8, how can I download apps?

  Return the iPhone 4 and buy an iPhone more later from model.

  The iPhone 4 does not support any version of iOS iOS 7.1.2 above.