The viewer error event
Hello
If this question was already posted please let me know.
I have a worm WRT54GS router. 6. my PC is connected to the router. Whenever I start my computer, I see the following in Event Viewer:
Your computer not was not assigned an address from the network (by the DHCP server) for the network card with network 0x00271383D876 address. The following error occurred: 0 x 79. Your computer will continue to try and obtain an address on its own from the server network address (DHCP).
I have access to the internet and my home network works, but I'm just curious to know if this error is anything.
Am on Windows 7 Pro 64 bit. I just upgraded the firm dishes at 1.52.8
Any other information that you may need to help me please do me know. Any info you can provide would be great.
Thank you
So sound on the motherboard, you can always install the driver. Just disable IPv6 as it is no use as it right now. You can always go back and turn it back on.
Tags: Linksys Routers
Similar Questions
-
HyslJavaService.exe the viewer error event
The event viewer is pulling up an error
a Sidebyside error every two days which says:
"Activation context generation failed for"c:\Oracle\middleware\epmsystem11r1\common\utilities\javaservice\HyslJavaService.exe". Dependent assembly
Microsoft.VC90.ATL, processorArchitectrue = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "9.0.21022.8" was not found. Please use sxstrace.exe for detailed diagnosis.
I don't know why this error occurs. Anyone has any reason why this would take place?Workaround is to manually install the 32-bit version of VCRedist
KosuruS
-
How to fix the below errors event-7001
How to fix the below errors event-7001. Because my PC Win7 OS frozen when start as msg 'Welcome '.
The computer browser service depends on the Server service which failed to start because of the following error:
The dependency service or group was able to start. Event ID is 7001.Hello
Try to fix this problem by doing this
- Open the Device Manager.
- On the view menu, click to select the check box Show hidden devices .
- Double-click drivers Non Plug-and-Play.
- Double-click NetBIOS over TCP/IP.
- In the use of the device box, click use this device (enabled).
Hope this helps
James
-
Hello
Ive try to run an event using the structure DAQmx event, but when NLB is im getting an error,.
Does anyone know how it works correctly?
Thank you!
attached photo
Tokyghy wrote:
In fact, I'm looking for change detection
Something like that?
Best regards
-
Help to create the view - error: ORA-00955: name is already used by an existing object
Hello
I am trying to create the following view but sqlplus displays a message and point of view has not been created. I use 11g Express.
SQL > create view (client, f_pedido, total) orders as
2 (
3 select usr, date, sum (rising) as important
4 of
5 (
6 select lineas_any.usuario as usr, lineas_any.fecha_pedido as date, lineas_any.cantidad * as rising referencia.precio
7 of lineas_any
inner join 8
referencia 9
10 on lineas_any.referencia = referencia.codbarras
11 )
Group 12 by usr, date
13)
14 order by date asc, usr;
of lineas_any
*
ERROR on line 7:
ORA-00955: name is already used by an existing object
There are also descriptions of the two tables involved:
SQL > describe lineas_any
Name Null? Type
------------------------------------------------------ -----------------
USER NOT NULL VARCHAR2 (60)
FECHA_PEDIDO NOT NULL DATE
REFERENCIA NOT NULL VARCHAR2 (15)
AMOUNT NUMBER (2)
SQL > describe referencia
Name Null? Type
------------------------------------------------------ -----------------
CODBARRAS NOT NULL VARCHAR2 (15)
PRODUCT NOT NULL VARCHAR2 (50)
FORMATO NOT NULL VARCHAR2 (20)
SILTING NOT NULL VARCHAR2 (15)
PRECIO NOT NULL NUMBER (7.2)
STOCK NUMBER (5) NOT NULL
MIN_STOCK NOT NULL NUMBER (5)
MAX_STOCK NOT NULL NUMBER (5)
Please, could someone help me in this matter?
Thanks in advance.
Kind regards
It means that it is already an object named peridos. Question:
Select object_type from user_objects where object_name = 'PERIDOS;
to find out what type of object it is. Any chance you try to change the existing definition of peridos view? If so, use
CREATE or REPLACE view orders (customer, f_pedido, total) as...
SY.
-
the common error event you want to send the report to microsoft
Hi tenaj7,
· Exactly when you receive this error?
· It's when you access Internet Explorer or when the computer starts?
· You have a toolbar installed?
If the problem occurs then on Internet Explorer, try the following.
Method 1: Uninstall all toolbar installed and check if the problem persists.
Method 2: Try optimize Internet Explorer and see if the problem persists. Follow steps 2, 3 and 4 at the following link.
Internet Explorer is slow? 5 things to try
Method 3: If is not on Internet Explorer, then you can try to start the computer in safe mode and check for the issue.
Just reply with the results.
-
My computer restarts several times. The event viewer displays the following errors: 14353, 14349, 1101, 6008, 1001, 7000. I know it's related to windows media player. Is there a download or a patch for this problem?
Hello John Dorch,.
1. which version of the operating system is installed on your computer?
2 did you change on your computer before the show?
We need more information on the topic to provide you with the best solution.
-
459 browser in the event viewer errors
These errors have concocted 459 times in my the event viewr (it will probably be more in the moment where I get a response) what is it, and how to solve? I use google chrome as my default browser, and it crashes all the time.
The master browser has received a server announcement from the SIAK-PC computer that believes it is the master browser for the domain of transport NetBT_Tcpip_ {C6FC398A-D719-4F42-8CF7-E9615575EA2F}. The master browser stops or an election is forced.
The master browser has received a server announcement from the computer PC ALEX who believes it is the master browser for the domain of transport NetBT_Tcpip_ {C6FC398A-D719-4F42-8CF7-E9615575EA2F}. The master browser stops or an election is forced.
The master browser has received a server announcement from the computer OFFICEMAX023 PC that believes it is the master browser for the domain of transport NetBT_Tcpip_ {C6FC398A-D719-4F42-8CF7-E9615575EA2F}. The master browser stops or an election is forced.
The master browser has received a server announcement from the IBM-A0U6WFXKY38 computer that believes it is the master browser for the domain of transport NetBT_Tcpip_ {C6FC398A-D719-4F42-8CF7-E9615575EA2F}. The master browser stops or an election is forced.
The master browser has received a server announcement from the computer PC OWNER who believes it is the master browser for the domain of transport NetBT_Tcpip_ {C6FC398A-D719-4F42-8CF7-E9615575EA2F}. The master browser stops or an election is forced.
There are also a bunch of warning dispersed among the errors that say my computer tried to say that it is the master browser, but this isn't.
Hello
Hard to say that Chrome has a tendency to be unstable for many. Do you get any error messages?
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html---------------------------------------
Do a Restore Point then you can recover if necessary (not that it should be necessary).
How to create a Vista System Restore Point
http://www.Vistax64.com/tutorials/76332-system-restore-point-create.htmlHow to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
---------------------------------------Check this entry
Start - type in search-> Regedit Search top - make a right click on - RUN AS ADMIN.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Browser\Parameters
MaintainServerList Auto
What other settings you have in this key? (there are others that we might need to compare).
==============================
Easy to read Event Viewer Utility
MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.htmlI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Hello
In Event Viewer, I see a lot of mistakes like:
Source: The customers DNS events
There was an error trying to read the local hosts file.
I read that threat indicating to rename the hosts for "hosts" file
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/system-log-shows-repeating-error-code-3221225485/3700e855-ded4-4F12-960f-1577f6132c04
HOWEVER, the name of the file in my computer appears as it should
C:/Windows/System32/drivers/etc / "hosts".
and the content of the file is as it is supposed to be according to: http://support.microsoft.com/kb/972034
What should I do to fix this error?
P.S. I suspect my computer is compromised. Last weekend, Security Essentials has reported a malicious file backdoor and it has been deleted, but I have a weird behavior of the computer
Thank you
Veronica
Try to re-create the hosts file.
Open Notepad as administrator (click right on the Notepad icon or shortcut and click Run as admin) and type the following information in it:
127.0.0.1 localhost
: 1 localhost
The '1' in the '127.0.0.1' must be in the first column of the line and there must be at least one space between "127.0.0.1" and "localhost". In the second line, there must be at least one space between ": 1" and "localhost".
Save the file with name "hosts" in the C:\windows\system32\drivers\etc folder.
Source: http://www.sevenforums.com/system-security/130518-hosts-file-missing-should-i-worry.html
You seem to have a hard drive problem. Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download to your OneDrive (formerly Sky Drive), share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.
-
VC die randomly and the windows event viewer will display the following error message
Hello
in the last time we are experience a lot of vc crashes and the windows event viewer shows the following error:
ORA-01483: invalid length for the DATE or NUMBER variable binding
"is returned when you run the SQL" UPDATE VPX_VM SET TOOLS_STATUS =?, TOOLS_VERSION =?, GUEST_OS =?, GUEST_FAMILY =?, GUEST_STATE =?, DNS_NAME =?, IP_ADDRESS =? WHERE ID =? ».
ORA] ORA-12899: value too large for column 'VPXADMIN '. "" "" VPX_VM '. "" IP_ADDRESS"(real: 40, maximum: 16)
"is returned when you run the SQL" UPDATE VPX_VM SET TOOLS_STATUS =?, TOOLS_VERSION =?, GUEST_OS =?, GUEST_FAMILY =?, GUEST_STATE =?, DNS_NAME =?, IP_ADDRESS =? WHERE ID =? ».
There is no update or modify the software to vmware esx/vc or oracle.
Anyone has the same problem or have a solution/fix for this problem?
Environment:
Oracle 10.2.0.3 DB
Virtual Center 2.5 U3
VMware ESX cluster
Vmware ESX 3.5 Server Patchlevel 1 x 143128
3 x Vmware ESX 3.5 Server Patchlevel 123630
This is a known bug in oracle - 10.2.0.3. Upgrade to 10.2.0.4 or install the Oracle patches 6085625 and 6452485 (as far as I remember you just one of them, but for the moment, I can't say that one)
--
There are 10 types of people. Those who understand binary and the rest. And those who understand the gray code.
-
FRX Drilldown Viewer Error Message When you try to change the destination printer
Hello, I have a bit of staff (I'm just technical support) which is affected by the following error message when they try to change the printer output
in FRX Drilldown Viewer: "error: 0 Cccurred in: APIPrintCommonDialog().
I hope that some useful information about the system:
They use the application of visualization FRX exploration down in a Citrix XenDesktop environment. It runs on Windows Server 2008 R2, Enterprise Edition (SP1).
The OS is a 64-bit version with 8 GB of RAM installed.
Please feel free to respond with any need for additional information. I tried to search the event logs, but was unable to find anything of use... maybe
could someone point me in the right direction, it?
Thank you very much!
AnthonyHelloThanks for posting the question.The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. -
NET optimization service event viewer error 1111
the Viewer .net optimization service event 1111 service error
Hello
See the link, download the package and install. Check whether the problem is resolved.Package redistributable Microsoft Visual C++ 2010 (x 86) -
original title: NETBios TCPIP of missing in Device Manager
I recently had to run two antivirus programs on an infected computer and am now unable to connect to the internet. When I went to the event viewer, I noticed the following error messages:
Event type: error
Event source: Service Control Manager
Event category: no
Event ID: 7000
Date: 16/01/2012
Time: 12:31:17
User: N/A
Computer: JARRIOUSSTUDIO
Description:
The NetBios over TCP/IP service failed to start due to the following error:
The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.
Event type: error
Event source: Service Control Manager
Event category: no
Event ID: 7001
Date: 16/01/2012
Time: 12:31:17
User: N/A
Computer: JARRIOUSSTUDIO
Description:
The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:
The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.
Event type: error
Event source: Service Control Manager
Event category: no
Event ID: 7001
Date: 16/01/2012
Time: 13:32:01
User: N/A
Computer: JARRIOUSSTUDIO
Description:
The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:
A device attached to the system does not work.
Event type: error
Event source: Service Control Manager
Event category: no
Event ID: 7001
Date: 16/01/2012
Time: 13:32:01
User: N/A
Computer: JARRIOUSSTUDIO
Description:
The helpdesk TCP/IP NetBIOS depends on the NetBios over TCP/IP service which failed to start because of the following error:
A device attached to the system does not work.
When I look in the Drivers folder, I see netbt, but devices & Non Plug and Play Devices, of TCPIP NETBios is not listed in Manager.
Hi Diddy Dell,
Follow these methods.
Method 1: Performs a search using the Microsoft safety scanner.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Method 2: Follow these steps:
Step 1: Start the computer in safe mode with network and check if the problem persists.
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222
Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start, run.
(b) type msconfigand click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal startup - load all services and device drivers and then click OK.
(e) when you are prompted, click on restart to restart the computer.
Method 3: Follow the steps in the article.
How to reset the Protocol Internet (TCP/IP)
http://support.Microsoft.com/kb/299357
Windows wireless and wired network connection problems
-
Running Windows Vista Service Pack 2. The event viewer shows the following error message:
«Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.»» Events cannot be delivered through this filter until the problem is corrected. »
Product: Windows operating system ID: 10 Source: Microsoft-Windows-WMI Version: 6.0 Symbolic name: WBEM_MC_CANNOT_ACTIVATE_FILTER Message: Filter event with the query '%2' could not be reactivated in namespace '%1' due to error %3. Events cannot be passed through the filter until the problem is resolved. Rose solution event and it refers to Windows Vista Service Pack 1 and by creating a Test.VBS file to run @ http://support.microsoft.com/kb/950375.
Is there a solution more up-to-date for this problem?
Thank youHi Sandy,
I suggest you to follow the steps from the link and check if it helps.
-
Event ID, errors, the description for event ID, 1307, 1312
Hello
I am getting following error messages inside my Application folder in the event viewer:
The description for event ID (1312) in Source (ASP.NET 2.0.50727.0) could not be found. The local computer may not have the information necessary registry or message DLL files to display messages from a remote computer. You may be able to use the option/auxsource = flag to retrieve this description; See Help and Support for more details
and also
The description for event ID (1307) in Source (ASP.NET 2.0.50727.0) could not be found. The local computer may not have the information necessary registry or message DLL files to display messages from a remote computer. You may be able to use the option/auxsource = flag to retrieve this description; See Help and Support for more details
Does anyone know how to remove them? Would be very happy to all general approaches, suggestions, ideas, comments etc...
Thank you
ColmHi Selvavelan,
As you mentioned that you use Microsoft Dynamic CRM 4.0, I recommend that you post your question in Microsoft CRM Dynamic support for assistance.
Hope the helps of information.
Concerning
Joel S
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
I have an Acer Aspire One, which is raise a blue screen every startup. It started last Wednesday. I heard that this problem is caused by a udate that Microsoft released. Microsoft is going to right a way to netbook users, who do not have a cd player,
-
Cannot print using printer Brother HL-1440
Original title: Driver Brother HL-1440 My Brother HL-1440 has worked recently. Using Windows 7 adds a Brother HL-1440 printer that does not print, I added. Convenience store showed no problems. I've updated the driver. Still, it does not print.
-
Defective feedback from Adobe Illustrator 1525nw Laserjet
We currently have a 1525nw connected to a SBS of Win2003 Server and workstations with Windows XP 32 bit and Win7 64-bit. This printer is great apart from that we use the most for. We mainly work with Adobe Illustrator CS4. This printer is unable to p
-
Cannot use ftp to connect to my Web site on windows 7
I can't ftp to connect to my Web site. Is it possible that my Web host is responsible or windows do not allow the connection. I have disabled the firewall. Tried all ways to connect. Including clients and web addresses. And even the method provided f
-
With the help of BC is great to share the States of development with my clients. In fact, I use the free site of BC, that i've got that I opened my BC account.Now, I noticed that it is possible to get several free sites (unpublished). See pricing and