Reinstall the Vista SP1

Similar Questions

• Get an "unknown error" so he was trying to make the Vista SP1 and the error code 800F081F

  I am running Vista Ultimate.

  I installed the hotfix for Windows (KB947821). I always get the "Windows has encountered an unknown error" with the code 800F081F.

  I am also having .net Framework questions (why focusing on my updates in the first place, I started). I have "fixed" but was lifting a msg of error at startup:

  > Unhandled exception has occurred in your application. If you click on > continue, the application will ignore this error and attempt to continue. If > you click on exit, the application closes immediately.

  > There is a parsing of the query error. [The line number of tokens = 2, token line > offset = 27, token s = error]. (I have more error msg if necessary.)

  After you install the hotfix, this error disappeared, but I can't yet download the update of the SP1 for Vista. It is a sine qua non for SP2.

  Help, please! Anyone? 8

  * Title *.
  I get an "unknown error" so he was trying to do the update to Vista SP1, even after the installation of "fix" and always error code 800F081F

  KonfusedKathy,
  I suggest that you do the following:
  Start by putting your system in a clean boot State.
  Run the disk error checking
  Run System File Checker
  Run the System Update tool
  If there are not only found problems that couldn't be fixed by one of them and then try to reinstall SP1.

  Post back with the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Reference Dell inspiron 1521 reinstall windows vista sp1 getting error code 0 x 80070057

  I'M JUST TRYING TO INSTALL WINDOWS VISTA SP1 DISK ON DELL INSPIRON 1521 AFTER CRASH AND GET ERROR CODE 80070057 0 X, WINDOWS WILL REINSTALL OR REPAIR CAN NOT GET ONLINE, NEED HELP

  Hello

  I suggest you follow the steps in troubleshooting section below and check if it helps:

  Error message when you try to install service packs or updates of Windows on a Windows Server 2008 or Windows Vista-based computer: "ERROR_INVALID_PARAMETER(0x80070057)."

  
  

  http://support.Microsoft.com/kb/2469239

  Hope this helps,

• Remove the Vista SP1 Setup file

  Two years ago I downlooaded and installed Vista Service Pack 1.  The installation file, a self-extracting stub, is always on my desk.  He uses about 0.6 GB of space on my hard drive.  I can it safely remove?

  Hello

  Welcome to Microsoft Community where you can find all the answers related to Windows.

  According to the description, it looks like you want to delete the downloaded SP1.

  You can safely delete the file to install from the Service Pack 1 is installed on the computer.

  Using the windows-related issues feel free to post on Microsoft Community.

• Inability to see the Vista sp1 when I run WU. / problem driver Sigma Tel.

  Hello

  I have a laptop XPS M1710, the series models MXG061 with Vista SP0. I tried to upgrade to Vista sp1 since its release on 18/03/2008 without success. I read all the MS KB dealing with potential/problems and had the required 3 KB / hotfixes installed before beginning the process.

  The only question I identified was the Sigmatel audio driver. I've updated my driver installed with the newest Dell A02 v.6.10.0.5343 download one and tried WU and could not see Vista sp1. I then tried another pilot that I became aware of via a request mailed to experts-exchange posted by an employee of dell Chris B. was V.6.10.0.5614 A09 still when I tried WU after the installation I was unable to see Vista sp1. Any constructive help on this issue would be appreciated. Thank you.

  
  

• Satellite A300 - after installing the Vista SP1 no longer start

  Hello

  I brought my Satellite A300 friends tonight to upgrade Vista to Windows 7.

  The disc of Windows 7 told me before he could upgrade the Vista would need a service pack 1, so I started to install the service pack and when he went to restart mode then it spent in step 2 restart and all of a sudden the screen went black and a load of a number appeared and it goes no further the system frozed.

  Problem now is that Windows does not start and it will not work in safe mode and I'm afraid that all my friends photo and files are now gone.

  I'm empty!

  Can anyone help?

  Hello

  Now, what happens if you try to start Windows? You get an error message or something else?

  Normally before you install something like a Service Pack or Windows 7 you must back up all the files first and this must be done at any time normally ;)
  I think you can only recover data if you put the HARD drive into an external HARD drive enclosure. Then, you can save the data on another computer.

  After that, you can do a clean Windows 7 or alternative facility. install Vista using Toshiba recovery disc, then Windows 7.

  Welcome them

• Failure of the Vista sp1 x 86 update

  I again and again to install sp1 because everytime I try, it gets an error [code 80073712] and he says it is an unknown error. I use a HP Pavilion dv6704nr if this is useful.

  Gibson H,

  Try to look at these urls then can provide a solution for you.
  http://www.windowsreference.com/Windows-Vista/fix-for-Vista-SP1-install-error-80073712-through-Windows-Update/
  http://support.Microsoft.com/kb/931712

  Is it solved your problem?

  Kind regards
  DFT IM me -TWiTTer: @DFTER

• The Vista SP1 installation problems. 0xc0190036 error code

  When I try to install SP1 for Vista, I have a code for loop (0xc0190035) restart in GADGET. XML file.  I also cannot install security update for Windows Vista - KB938123, which is an update to the gadgets in the sidebar. He get an error code of 8007643. I did all THE procedures in help to include reinstall .NET.  I totally uninstalled all the gadgets of my computer in case there's a wrong code or something else in there.  I have VISTA Home Premium build 6.  It is an OEM copy.  I installed KB947821 checks if SP1 is ready to enter into the computer and all right because it will without asking for updates.  Can someone help me?

  Jim Tinsley,
  Here are some steps to start with.  First to perform a clean boot on your system.  Then, run the following:
  Disk error checking
  System File Checker

  Then Download SP1 and try to install it manually.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• install the vista sp1. then media player 11 will not play or burn cd

  Media player 11 the fine work before you install sp1, and then will play or not burn CD

  Hi Morris,.

  Do you have an error message when you try to read or burn a CD?

  You can try to update Windows Media Player and see if the problem is resolved.

  Refer to the steps on this article http://windows.microsoft.com/en-IN/windows-vista/Update-Windows-Media-Player

  Let us know the results. We are here if you need further assistance.

• When you try to install the Vista SP1, getting error 800F0900 Code

  I'm unable to install service pack 1 for Windows Vista. It will go almost to the end of the installation, and then the error pops up.

  I installed system update readiness tool.

  I have rebooted background intel transfer serv, cryptograph serv and windows update.

  I tried going through windows update, but would not yet spent 0% of the dl. So I tried a few Fixer windows update and still the same thing.

  I've done the cmd as administrator and did the sfc/scannow, and he says there are errors that it is impossible to repair.

  I tried to make the findstr/c: "[SR]" windir\logs\cbs\cbs.log>sfcdetails.txt and retrieve a FINDSTR: cannot open windir\log\cbs\cbs.log.

  Then I tried c:\logs\cbs\cbs.log Notepad and get back that the system can't find the path specified.

  My laptop came with Vista on it so unfortunately I have no disk to work with.

  I have no answer why you cannot install SP1.

  My answer is on your trying to open the CBS.
  You have not correctly the command line.
  It's... notebook C:\windows\logs\cbs\cbs.log
  Copy and paste the command line instead of typing.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Reinstall the Vista Ultimate upgrade after replacing hard drive - remove Windows PowerShell

  My HDD recently crashed and the manufacturer (Dell) gave me a new one with the software and systems II had orginially purchased pre-installed on the drive.  In this case, I had Vista Home Premium installed.  I got about a year ago, bought and upgraded to Vista Ultimate and I'm now trying to reinstall (I have it on DVD).  When I do, I get a message that I must remove Windows PowerShell before upgrade.  I can't find PowerShell in the application removal utility, even if I can find it when I search in the start menu.

  Any thoughts on how to deal with this?

  In addition, since the beginning of this thread, I found the following instructions in another thread:

  How to uninstall Windows PowerShell

  To uninstall Windows PowerShell 1.0 in Windows Vista, follow these steps:

  1. Click Start, in the Search box, type appwiz.cpl and press ENTER.
  2. In the tasks list, click View Installed Updates.
  3. In the list to uninstall an update , right-click right of Windows PowerShell (TM) 1.0 (KB928439), click on uninstall and follow the instructions to remove Windows PowerShell 1.0.

  But, I do not see Windows PowerShell (TM) 1.0 (KB928439) in the generated list (although there are many, many others).  I found three programs of powershell appears when I put in the search box of start powershell.  Can I just delete them?

  Thank you.

  Try download Revo http://www.snapfiles.com/reviews/revo-uninstaller/revouninstaller.html to uninstall all the programs of PowerShell.  I hope that you will find the main program so it can be uninstalled.

  If that doesn't work, uninstall each update of PowerShell that you find.  Also, check the master list of program to see if you can find.  A when done, reboot and start the installation again and see if you come up against the same error.  If so, we may have to try another way to get rid of it - but we will cross that bridge if we come to it.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot receive the Vista SP1 via Windows update

  Hmm... O always waiting for SP1 update through WU. I am at a loss of what kind of drivers that may be causing this not be available.

  Anyone have any ideas?

  I know that I've posted about this before and others have said to download the standalone version but... I was still hoping WU...

  Hi mate,

  Today the question? I mean, if the update of windows still do not offer SP1, just download it if you want to have it installed on your system.

  I really Don t understand your problem, it s quite usual that windows update offers updates/bug fixes sometimes later then service packs are released.
  So just download it and install it on your machine, West no difference between the installation of this "standalone" version or download via windows update.

  Welcome them

• the Vista sp1 sp2 update error, error code: 800f081f

  Hello

  When I try to update my windows vista family premium 32-bit OS to sp2 it says error code 800f081f. I tried installing stand-alone, all trouble shooting steps (anti virus - dye, with some Member States of the tools and c) recommended by the ms tech support guy, but I am not able to solve it, my laptop is dell 1545.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Why my pc always says update of the vista sp1 when it has already downloaded?

  When I go to Windows update it always rises "12 important update 1.9 MB' which is Vista SP! who has already downloaded 4 times?

  Why not follow my advice from the beginning? Click Start > etc...

• What updates do I need before installing the Vista SP1.

  Hi when I try to install the stand-alone version of SP1 it tells me that I need further updates before it will work.

  Download the Sp1 from the Download Center and install it. It contains everything you need ;)
  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/