The volume is low on the system home theater BDV-E490 on both DVD and Audio IN

Similar Questions

• Get annoying action ads at the top of the Yahoo home page. I always use Firefox and haven't changed the settings, then why the big announcements? I know that they are put there by Yahoo\, but they were not there before, and they aren't there when I open

  Get annoying action ads at the top of the Yahoo home page. I always use Firefox and haven't changed the settings, then why the big announcements? I know that they are put there by Yahoo, but they were not there before and they aren't there when I open Yahoo with Explorer.

  Install adblock more with subscription easylist and check

  • https://addons.Mozilla.org/en-us/Firefox/addon/Adblock-Plus/

• How can I reinstall the dolby home theater?

  I had sound problems with my Aspire V3 (571 G). I heard a noise dry while listening to music and watching videos. It was really boring. I thought it was a problem with the Dolby Home Theater v4, so I went to the control panel > uninstall a program > cinema dolby Home > repair. It does not solve the problem, so I went to C:\ and copied the 'Dolby PCEE4' folder, then I uninstalled the thought of Dolby Home Theater v4 that I will reinstall it by putting the folder to the directory. While it has been uninstalled, I discovered that the problem was not the home Dolby cinema, instead, it was a kind of audio enhancement, so I disabled it by clicking on Audio > manage audio devices > Speakers > properties > improvements and I ticked the box: "turn off all sound effects. The sound is fine, it does not sound dry but now I can't reinstall Dolby Home Theater v4. I put the 'Dolby PCEE4' folder to the C:\ directory and it did not work. I opened the case and found a command called 'install' so I ran the command, but it created only 15000 + (3,79 GB) files in the folder and the home theater Dolby has not yet been installed. So I went to http://us.acer.com/ac/en/US/content/drivers and I entered my name of the model and the OS (Windows 8), but it wasn't a "Home Cinema Dolby' application or a driver available for download. How can I reinstall the Dolby Home Theater v4?

  Think, it comes with the realtek drivers, cause after the failure of windows 8 and install the drivers for it on windows 7, it was the home theater dolby. And the realtek drivers

• Unable to load because the system registry is missing or corrupted state 0x000014c and the cd cannot read HP windows vista recovery disc

  Windows vista HP didn't not load because the system registry is missing or corrupted state 0x000014c and the cd cannot read the recovery disk, could someone help, thanks

  Hello help 757,

  My apologies for the delay in the answer here.

  We need to check the BIOS of the machine and make sure that the CD drive is the first boot device.

  When this is complete, we can use the following article:

  http://support.Microsoft.com/kb/307545

  PLEASE NOTE:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can resolved e. Changes to settings are at your own risk

  Let us know if you have any questions.

  Best regards

  Matthew_Ha

• Hi, I just bought Adobe Acrobat Pro DC. I used the link that was sent to me to download. But the download was not successful. After trying 5 times, the system says, now I downloaded too many times and has refused to let me download it again. It's someone

  Hi, I just bought Adobe Acrobat Pro DC. I used the link that was sent to me to download. But the download was not successful. After trying 5 times, the system says, now I downloaded too many times and has refused to let me download it again. Someone from Adobe is reading this? How can I get this fixed a problem? Thank you.

  Download Acrobat products | Standard, Pro | DC, XI, X

• Why are the creative Cloud system and the system of Support of Adobe gawdawful so dear and so ugly?

  Why are the creative Cloud system and the system of Support of Adobe gawdawful so dear and so ugly?

  Free market at work in a gullible or irrational population.

• Home Theater BDV - E3100 ROAR of SOUND system

  Whenever I stop Netflix or a video game that I play, or even if I just turn off the sound, I immediately hear a humming noise from the breech of the BDV-E3100 Blu - ray box come to a sudden stop.

  This humming noise occurs when I use either the audio settings of the TV for my Apple TV or a video game console. The sound is not constant (or even significantly strong) when the device is used, but when it happens and the audio stops using pause or mute setting, the sound of snoring stops immediately.

  Someone has an idea of what this might be? Thanks in advance.

  Here's what happens:

  When you play music, movies, or any strong audio device, whirring noise is the amplifier, increasing the speed to provide a sufficient voltage to send the bass of the subwoofer. Bass takes the most energy of an amplifier. Not sure if you remember in the 90s when the car audio aftermarket have been really popular, lights would be less bright on bass, and usually a 1 Farad capacitor would work by storing the tension and release the tension when the amp need on these low rumblings.

  Next time you play your audio files through this system, I bet you will notice only when there are serious events. I know it's annoying, but I think that this is part of the system build because mine does as well. And usually you can not hear it if you play with the sound loud enough.

  Let me know if this clears up anything.

• What is the difference between win 7 pro DSP OEI DVD and the OEM or normal Full pack?

  1. What is the difference between win 7 pro DSP OEI DVD and the pack OEM or normal Full we learned normally?
  2. does DSP OEI DVD comes with CD of instalation?

  These versions are for small integrators (DSP = 'partners in enforcement service'), which usually contain a single Windows (1pk = 32-bit or 64-bit, not both as in commercial versions) and an OEM preinstallation kit to preconfigure Windows and/or integrate additional tools (OEI = 'Installation of Original equipment' or 'Integration organizational environment'). They have the same limitations that versions OEM = license is tied to the computer where the operating system has been installed initially and not transferable in case of death of the machine. "192GO should be enough for everyone." (of the miniseries "Next generation jokes")

• How can I get the speakers to play from the Blue-ray/DVD instead of the TV home theater system?

  My wife and I just bought a Sony Bravia TV and Blue-ray Disc/DVD Home Theatre system. We hung the blue-ray to TV using the HDMI cable and hung stakeholders for the theater House for blue-ray, but the audio single system who will play is TV. I can't get the home theater system speakers to work. How can I make them work?

  Hello Eric,

  Alternatively, you can follow the link below to listen to the sound of television through the speakers of the Home Theater System (HTS).

  http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C1000587

  Make sure that the TV speakers are disabled in the TV menu.

  If my post answered your question, please mark it as an "accepted Solution".

• Is it possible to connect an EXTERNAL FM antenna to the Home Theater BDV e3100 system (outside)?

  The small cap plastic and wire supplied as an FM antenna do not work well for the FM reception in my area.  I have an antenna on my roof with coaxial cable conduit that provided excellent reception with my old Sony BDV e570 HTS (had a coaxial connector for FM antenna on the rear of the unit).  Y at - it an adapter or another method by which I can plug my external antenna to my new unit (BDV E3100)?

  You can try to connect your external to the System BDV-E3100 antenna while we do not guarantee that it will work with it.

  If my post answered your question, please mark it as "accept as a Solution.

  http://bit.LY/win-4k

• During the installation of the ultimate upgrade, get "one or several components of the system could not be configured", then it restarts and pours me to premium.___How can I say what is the cause of the problem and fix it?

  I have the same problem as Laweaver.
  I have a HP pavillion Model # m9040n running the 32-bit version with service pack 1.
  My Vista Ultimate Upgrade drive is 32 bit and also has Service Pack 1 on it.
  I ran my system through the Microsoft Update and it is common.
  I ran Vista Advisor and he tells me that everything is good to go.
  I also ran my system through the center of update of HP and he is current.
  I tried the Ultimate Upgrade three times and got the same message twice.
  Of course, it waits until it reaches "end of the upgrade" before it fails.
  I turned all the extra wide including the firewall when I tried the upgrades
  My computer came with the home edition Premium already installed on it and I have the disks of backup for him if I have to do a repair on it.
  I have the same question though - how to tell what the cause of the problem and fix?
  Thank you
  Rich

  Hi Eaglesoar1,

  This problem occurs because some features of Windows Vista cannot be migrated to the upgraded version of Windows Vista.

  To resolve this issue, follow these steps:

  1. click on Start, type programs and features in the search box, and then click programs and features in the list programs.
  2. under tasks, click on turn Windows features on or OFF.
  If you are prompted for an administrator password, type the password. If you are prompted to confirm, click continue.
  3. Click to clear the check boxes for the following features:
  o Microsoft .NET Framework 3.0\XPS Viewer
  O remote differential compression
  O DFS replication service window
  4 upgrade Windows Vista to a more advanced version and then click to select the check boxes that you clicked to clear in step 3.

  For more information see the Microsoft kb article below.
  Error message when you try to upgrade Windows Vista to a more advanced version of Windows Vista: "Windows cannot configure one or more system components to install Windows, restart the computer, and restart the installation.
  http://support.Microsoft.com/kb/946078

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't install Windows 7. It is said that "the installation program was unable to create a new partition system or locate an existing partition of the system", when I chose I have hard drive and my C: / drive is not there!

  I have 3 drives hard, but windows 7 install only 2 (im of a facility in xp) see of them. The strange thing is that it can not see my HDD with xp on?

  I tried to install it on others, but it says "Setup could not create a new partition system or locate an existing partition of the system" and hard drives are: 1 is logical, 2nd is system, 3rd is primary. WHAT SHALL I DO PLZ! I really need help!

  Hello

  I suggest you to see link below and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Setup-was-unable-to-create-a-new-system-partition/92c682dc-A759-49b9-A235-e84d13db6a96

  http://social.technet.Microsoft.com/forums/en/w7itproinstall/thread/9e18e169-f77e-4026-B22F-f602e670d55c

  Hope this information is useful.

• my pc cannot accept the installation of antivirus, it shows that the system is not suitable for running ms Dos and ms windows app com help me install

  my pc has failed to install any antivirus it shows that the system is not appropriate for the execution of ms - back and ms windows application help

  Hello

  problems to install your anti-virus software, contact the manufacturer of the anti-virus

  also scan for Malware

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• where can I get a copy of the dolby home theater 7 windows

  where can I get a copy of Dolby home theater windows 7

  Dolby Home Theater is a software available through OEM (like HP, Acer) and is usually pre-installed on their PC. If you do not have the software, contact the manufacturer support for assistance.

  You can take a look at the following link:
  http://www.Dolby.com/in/en/consumer/technology/PC/Dolby-Home-Theater-v4.HTML#3-products

• My BDDVDRW drive will recognize is no longer read the audio CD, but both DVD and BD

  I have a HP pavilion dv6 under Windows Home Premium with a HP BDDVDRW CT40N. I have never had any problems with the optical drive. About 2 weeks ago, I started ripping of audio CD on my hard drive using Windows Media Player. I pulled about 15 CD over the 2 weeks. Then all of a sudden the drive read audio CD - I put a CD in and nothing, even after hours. If I click on the player it ejects and answers please drive inset.

  So I thought it was the CD and inserted other CD, even the ones I had just ripped - nothing. But it reads the DVD fine; I just saved a DVD with it.

  The machine is about 5 years old, but it works well, so I thought maybe it was the reader. I have another computer; It only a little more than a year, with a HL-DT-ST BDDVDRW CT40N and running Windows 10. I started to rip from CD with this computer also with Windows Media Player. Guess what - same thing.  I was able to extract only 3 CD before he showed the same symptoms: can't see CD; no problem with DVD.

  Finally, I went to my wife's computer, a different HP running Windows 7 with a DVD - RW disc. This time, think of some sort of virus or malware may be responsible, I made sure that there was no Internet (not ethernet WiFi or Bluetooth). I ripped a CD and then the same thing.

  All three computers has failed using different CD - it wasn't the same CD that was torn apart last before failure.

  I doubt very much that three different computers with different symptoms of operation and different readers might undergo the same material unusual problem in few days after execution of the software even on different CDs. There must be something about the use of this extraction software (Windows media player) or disk characteristics of driver that blocks the CD (apparently after extraction).

  I'm only moderately tech savvy, but successfully, sometimes after a considerable effort, more than anything I tried. I have had no success with this (towards even a problems prior restore point) and am at a total loss.

  Help, please.

  While they inspected, CD is not detected by the computer. You can do the following steps the solved the problem.

  1. Scan of the SFC
  • Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
  sfc/scannow

  2. run the disk check in Windows 7

  • Open the Start Menu and click on the button of the computer on the dark right side.
  • Right-click the hard disk you want to check, and then click Properties.

  3. click on the Tools tab and click the check now under error checking.

  4. you will now see this window. Follow the steps below for what you want to do.

  5. to only scan the disk for errors

  Note: This will give you just a report if there are drive errors or not and will not attempt to correct.

  • Let off both boxes, and then click the Start button. (see screenshot below step 4)

  6. only scan and try bad sectors recovery

  Note: this analysis tries to find and repair errors on the hard drive itself, physical and it may take much longer to complete.

  • Uncheck the automatically fix file system errors . (see screenshot below step 4)
  • Select the search for and attempt recovery of bad sectors .

  7. only scan and trying to automatically fix errors

  Note: This will automatically attempt to repair problems with the files and folders that the scan detects.

  • Check the automatically fix file system errors . (see screenshot below step 4)
  • Uncheck the search for and attempt recovery of bad sectors .

  8. to analyze automatically try to fix the errors and bad sectors recovery

  Note: This will scan for file errors and physical errors (steps 6 and 7). It will attempt to repair problems with the files and folders and retrieve physical errors.

  • Check the automatically fix file system errors . (see screenshot below step 4)
  • Select the search for and attempt recovery of bad sectors .

  9. Click on the Start button and is not 10 or 11 below depending on the whether the drive is currently in use or not. (see screenshot below step 4)

  10 if the selected hard drive is not in use, you will then see to check the startup disc check the disc now.

  • When the analysis is complete, you will then see
  
  results. Click close.
• Click OK. (see screenshot below step 3)
• Stop, you're done.

11. If the selected hard drive is in use, then click on the schedule the disk check button. (see screenshot below)

Note: If the hard disk that you selected in step 2 is in use (for example, the C: drive or the partition that contains Windows 7), you will be prompted to reschedule the disk check for the next time you restart your computer.

• Restart the computer.
• At startup, you have only 10 seconds to press any key to cancel the check disk of measures 7 or 8. (see screenshot below)





• Once the scan is complete you will see a report similar to this below briefly until the computer restarts automatically.



If the problem persists, you can run repair for Windows 7.

Brand of kindly as answer if that answers your query. Let us know how it goes.

Thank you.