The volume on my laptop icon keeps popping up on the screen every time

Similar Questions

• How can I get rid of the black bar that appears in the middle of the screen every time I have set the basic like the volume control features, or brightness levels?

  Hi, can someone help me with a really annoying (and I'm sure a simple to fix) problem?  I don't know if it's related to Windows 7 or if it's just my laptop plays up.  I recently upgraded to Windows 7 from Visa and whenever I have increase/decrease noise, brightness, etc (no matter if I do this using the key on the keyboard or via the control panel), a black bar appears in the middle of the display, indicating the levels that I'm reaching with the adjustments.  It's useful... except it does not disappear after that I'm done.  The bar stays there for all the time that I am connected and text blocks, images on the screen that I can't minimize or even move it out of the road.

  Hi, can someone help me with a really annoying (and I'm sure a simple to fix) problem?  I don't know if it's related to Windows 7 or if it's just my laptop plays up.  I recently upgraded to Windows 7 from Visa and whenever I have increase/decrease noise, brightness, etc (no matter if I do this using the key on the keyboard or via the control panel), a black bar appears in the middle of the display, indicating the levels that I'm reaching with the adjustments.  It's useful... except it does not disappear after that I'm done.  The bar stays there for all the time that I am connected and text blocks, images on the screen that I can't minimize or even move it out of the road.

  Hi Mkum

  The bar you describe look like this image?

  

  If so, this is part of the HP software that is installed on the computer.

  Here is a link to the HP support forum where this utility is supported.

  Desktop PC noise and acoustic - HP Support Forum

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• How to add several presets in a reactive mode design without having to resize the screen every time

  I want to be able to add several screen size presets with the ability to view sensitive design but do not want to resize the screen and add each individually through the predefined custom function.

  Have you seen some messages on the internet (http://g-liu.com/blog/2013/08/firefox-rdm-presets/) who say it can be done, but could not find where the config is required to worm 26.0?

  Hello

  Work now how to do this. You first create an entry called "devtools.responsive.UI.presets" in the configuration file, and then add in the predefined string:

  If the steps are:

  (1) open a new tab in Firefox or window and enter about: config

  (2) (if a warning message appears, click OK.)

  (3) create a new entry devtools.responsive.UI.presets - right click and select 'new', then 'string' - under enter the preference name of the type "devtools.responsive.UI.presets" and then click OK. When the box of the input string appears simply add the following shows

  [{"key": "CGA: 320 x 200", "width": 320, "height": 200}, {"key": "QVGA: 320 x 240", "width": 320, "height": 240}, {"key": "CIF: 352 x 288", "width": 352, "height": 288}, {"key": "SIF: 384 x 288", "width": 384, "height": 288}, {"key": "HVGA: 480 x 320", "width": 480, "height": 320}, {"key": "(NTSC) VGA: 640 x 480", "width": 640, "height": 480}, {"key": "PAL: 768 x 576", "width": 768, "height": 576}, {"key": "WVGA: 800 x 480", "width": 800, "height": 480}, {"key": "SVGA: 800 x 600", "width"}] {: 800, "height": 600}, {"key": "WVGA (NTSC): 854 x 480", "width": 854, "height": 480}, {"key": "PAL: 1024 x 576", "width": 1024, "height": 576}, {"key": "WSVGA", "width": 1024, "height": 600}, {"key": "XGA: 1024 x 768", "width": 1024, "height": 768}, {"key": "1152 x 768", "width": 1152, "height": 768}, {"key": "XGA: 1152 x 864", "width": 1152, "height": 864}, {"key": "WXGA: 1280 x 600", "width": 1280, "height": 600}, {"key": "HD 720: 1280 x 720", "width": 1280, "height": 720}, {"key": "WXGA} {: 1280 x 768 ","width": 1280,"height": 768}, {"key":" WXGA: 1280 x 800 ","width": 1280,"height": 800}, {"key":" SXGA: 1280 x 1024 ","width": 1280,"height": 1024}, {"key":" 980 x 1280 ","width": 980,"height": 1280}, {"key":" Microsoft Surface RT: 320 x 240 ","width": 1366,"height": 768}, {"key":" 1400 x 900 ","width": 1400,"height": 900}, {"key":" 1400 x 960 ","width": 1400,"height": 960}, {"key":" SXGA +: 1400 x 1050 ","width": 1400,"height": 1050}, {"key":" 1400 x 1080 ","width": 1400,"height": 1080}, {"key":"1600 x 900"} {, "width": 1600, "height": 900}, {"key": "UXGA: 1600 x 1200", "width": 1600, "height": 1200}, {"key": "WSXGA +: 1680 x 1050", "width": 1680, "height": 1050}, {"key": "1920 x 900", "width": 1920, "height": 900}, {"key": "HD 1080: 1920 x 1080", "width": 1920, "height": 1080}, {"key": "WUXGA: 1920 x 1200", "width": 1920, "height": 1200}, {"key": "2K: 2048 x 1080", "width": 2048, "height": 1080}, {"key": "QXGA: 2048 x 1536", "width": 2048, "height": 1536}, {"key": "WQHD: 2560 x 1440", "width": 2560, "height": 1440}, {"key" {: "WQXGA: 2560 x 1600", "width": 2560, 'height': 1600}, {'key': "QSXGA: 2560 x 2048", "width": 2560, 'height': 2048 '}, {'key': "2160 p: 3840 x 2160", "width": 3840, 'height': 2160 '}, {'key': "4 k: 4096 x 2160", "width": 4096, 'height': 2160 '}, {'key': "4320 p: 7680 x 4320", "width": 7680, 'height': 4320 "}, {'key':" 8 k: 8192 x 4608 ","width": 8192, 'height': 4608 '}, {'key':" 8640 p: 15360 x 8340 ""} [{, "width": 15360, 'height': 8640}]

  then click OK

  All new presets should now be sensitive design mode.

  Worked for me!

• Loginoff, save your settings and Windows stops no display on the screen, every time I stop my Windows XP Professional SP3

  Hi all

  Hi Patfaucher1974,
   
  Your question seems incomplete. When you say "Windows is no display on the screen stop" means that you do not get the screen that says "closing Windows"?
  -You are unable to shut down your computer?
  -If so, can remind you to make changes to your computer between the calendar when things worked fine and now?
   

  Try the steps listed in the article below and check if that helps you:

  Your computer stops responding when you try to shut down in Windows XP

  Additional reference on:

  Advanced Troubleshooting for shutdown problems in Windows XP

• I want the security on but warning not to arrive on the screen every time and click on it

  Security warning pop up

  Hello

  1. What warning you talk about safety?

  2. when exactly you get pop-up window?

  3. are you referring to the user account control settings?

  If you're referring to user account control, I suggest you to return these items and check if it helps:

  User account control

  http://Windows.Microsoft.com/en-us/Windows7/products/features/user-account-control

  Enable or disable the User Account Control

  http://Windows.Microsoft.com/en-us/Windows7/turn-user-account-control-on-or-off

  How can I change the behavior of user account control by using the slider?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-change-the-behavior-of-user-account-control-by-using-the-slider

• How can I keep the "on-screen keyboard" to invite the user every time that I reboot? The system is Windows Vista.

  How can I keep the "on-screen keyboard" to invite the user every time that I reboot? The system is Windows Vista.

  Please explain what you mean... "incentive"?

  The keyboard screen is not supposed to be enabled when the computer is turned on.

  Here's how to turn off on-screen keyboard:

  http://www.Vistax64.com/tutorials/72733-screen-keyboard.html

• Help! Dreamweaver keeps automatically 'putting' my model on the server every time that I save it.

  For some reason, Dreamweaver retains automatically 'putting' my model on the server every time that I save it, replacing the model that was originally there and I don't know why. It is never used to do this, and all my other sites work fine and do not have this problem... I don't want that to keep overwrite files I have on the server... does anyone know how to stop him from doing this you? I would greatly appreciate any help that anyone can give.

  If it helps, I'm using CS4.

  Thank you

  Catherine.

  Ok.  It looks like an incomplete installation.  Nevertheless, DW think that you have a local test server.  Every time that you save the files, he put copies in your C:\Users\Catherine\Pictures\tailormadeart folder.

  Except if you create dynamic web sites that use databases and scripts server side, you don't need a test in DW server.  All you need is a Local site and your remote server.

  For static HTML sites, I recommend you remove or clear the definition of testing server.  See screenshot.

  

  Nancy O.

• Satellite L20 260 won't boot to the top, every time it freezes with no reason

  Hi all

  I have a problem with my satellite of sad, after 3-4 days I installed a new operating system (tried with XP SP2 and Kubuntu) system does not boot to the top, every time it freezes with no reason, the only way is to perferom a new installation of the OS. What is a hardware problem, perhaps related to the RAM or HARD drive?
  x 10, Daniele.

  Hello

  It's not easy to tell if the problem is software or hardware related.
  You must install the OS from the Toshiba Recovery CD and again test the functionality

  If the laptop won't boot again freezes immediately after that installation of recovery CD, and then it could be a hardware problem.
  You can try using MemTest 3.5 tool.
  It checks the memory of a malfunction.

• Satellite P300 - 20 H refresh the screen every 10 minutes and turn off during 3 sec

  Hey,.

  Basically, I bought my P300 Sat about a month previously and each time it runs, battery, the same error will occur...
  It will update the screen every 10 minutes or more and turn off for 2-3 seconds.

  This isn't a big problem, but it is annoying that I can not sort.
  I tried to run a check of problem to find a solution, but he says that he can not find a.

  Help, please
  Thank you.

  Hello!

  Can you please explain what you mean with refresh? And what exactly is happening?

  It is not easy to say what the reason is for this, but have tested an external monitor on the laptop? And you can determine if it s a problem with the internal display or not.

  In addition, you must make sure that you have installed the latest display driver and BIOS. The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  If you installed a display driver Toshiba not you should remove it. These display drivers can often cause problems and don t have protection against overheating.

  Good bye

• XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  Hello

  Let us perform the steps below and check out them.

  a. click "Start," "Control Panel", then "Add or Remove Programs". In the box "Currently installed programs", find the name of your wireless router. Click on the name of the software, and then click 'remove '. Click 'Yes' when prompted to confirm.
  b. click "Start" then "run". Type "Services.msc" and click "OK". Select 'Wireless Zero Configuration'. Click on 'start '.
  c. click 'Action', 'properties '. In the drop-down menu "Startup Type", click on the arrow and select 'Automatic' to assign the commissioning of automatic Wireless Auto Configuration. Click on 'OK '.
  d. restart your computer.
  e. right click on "Wireless connections" icon Select "View available wireless connections." Click on "change the order of preferred networks. Select the name of your network, and then click "Properties". Erase the old key and enter a new. Click the checkbox next to "Automatically use that key." Click on 'OK '.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Update - it gets to the final stage of the update every time it goes to "Starting Windows" and then it all comes back to the update

  Original title: Windows Update keeps reseting

  My computer had a mandatory update that began when turned on. Happens to the last step of the update every time, it goes to the "starting Windows" and then it all comes back to the update. Turn on the computer and then next turn has not changed anything either, and I can't after that.

  Hi Reilly,

  Thank you for the update on that.

  Please follow the steps in method 1, by our Support Engineer Ganesh Achar B replied on 12 February 2015 on the last response.

  If you are able to start the computer in safe mode, take note of the number of KB updates which fails to install.
   

  Also you can restore the system in safe mode.

  Check out the link below to perform a restore of the system.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Warning: System Restore affects file system of Windows, programs and registry settings. It can also make changes to scripts, files, batch and other types of executable files created under any user account on your computer. System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file. If you have backups of your files, you can restore files from a backup.

  Please answer us with the State to proceed to further troubleshooting.

• Why the hell I see adds anywhere in the browser, even if I have my ad running block? and why the hell every time I put the default home page, this isn't?

  Hello

  Why the hell it adds every where now? It was not the case before? and why the hell every time I change the home page to be the default, the min that I restart Firefox, it came again on the same silly page I don't know where the hell it came from?

  It was a very pleasant experience to use Firefox, but no more, I still love him his heavy on the machine and stuck a lot lately!

  incident reports NEVER managed to send that I don't know why!

  Come on guys, you can do better than that!

  Hi ajag,.
  Sorry, you have problems, but probably some adware or malware.

  Thank you for including the information system. I'm not familiar with "Vonteera free ads" However, he is apparently adware. Pay attention to the advice, followed by research on the internet I would be, for example, do NOT try the YAC website or tool.

  Using the Firefox addons Manager and Panel configuration remove toolbars unwanted obvious or programs. Then fully analyze up to tools date and multiple.

  • General method: remove a toolbar which took in charge your Firefox or the homepage Search

  Please follow the tips in the link above immediately and then do full scans as shown below in this post.
  I notice that you have a user.js file require separately.
  Post back saying that you tried and what the results were.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • Anti-Rootkit utility - TDSSKiller
  • AdwCleaner (for more information, see this other AdwCleaner download page)
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one. Windows 8 already has integrated antivirus.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

• I have crash reporting off, but still not the popup every time - how can I remove crash reporting altogether?

  Win7/FF31

  Thank you
  CC

  Thanks - I guess it's a way of saying that I have to continue to manually uncheck the box every time. So I guess I should change my question to "what is the point of having a 'crash reporting enabled' option setting if I still disable it manually every time?"

  Edit > shortly after I posted FF crashed again. This time the check box is unchecked (correct behavior). Please disregard above - I'll mark it resolved and re-post if problem persists...

• another window opens on the side every time I open Firefox

  I downloaded the free version of Firefox and transferred my favorites of internet explore. And I added eBay as one of the bookmarks. Now every time I open Firefox eBay opens on the side as another tab and my Google home page. EBay and Google are visible on the same page, but ebay is just left in a small window. It's annoying close the tab every time I want to open Firefox

  Right-click on the bookmark and select Properties, then turn off the preference for the load this bookmark in the sidebar, and then click Save.

  Buttons using JavaScript on web pages for "Bookmark this Page" causes this preference to select saving the bookmark in this way. Therefore, do not use these buttons, use the function 'Bookmark this Page' which is integrated with Firefox instead.

• Configuration automatic please wait blinks on the screen every few seconds, why?

  Whenever I start my computer a small window with the text "Auto Config please wait" flashes in the center of the screen every two seconds. This continues for a few minutes. After that he produced intermittently, but each time that it the screen dims and for a few seconds, I am unable to do anything either, no key or mouse fills it. Any suggestions? I scanned and repair errors and defragmented

  Hi YvetteBarnes,

  1. did you of recent changes on the computer?

  2. What is the version of Windows installed on the computer?

  3. What is the number of brand and model of the computer graphics card?

  The error message occurs generally if there is a problem with the monitor adapter or graphics on the computer.

  Method 1

  I suggest that you change the resolution of the screen on the computer and check if the problem persists.

  Change your screen resolution

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

  Method 2

  If the previous step fails, then you need to update drivers graphics card on the computer manually by visiting the card manufacturer's Web site and check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the problem persists, then connect another monitor to the computer and check if it works.

  I hope this helps!

  Halima S - Microsoft technical support.