The white screen.

Similar Questions

• Satellite A210 PSAFGC - Bios Update to get rid of the white screen problem

  I also have the white screen problem and I would like to update my bios to version 1.30, it came with.
  The problem I have is that I have a number of room A210 model PSAFGC.
  Support bulletin 98082422 for the update of the Bios does not have my room exactly number and I can not find something for my model.
  The 2 updates are at 1.70 and 1.90. I read the text of these two, and they seem quite different.
  Don't know what to do. Here is the info of the bulletin.

  Resolution:

  Update the BIOS of the computer to resolve this problem, by clicking on the link in the following list for your computer model.

  -Satellite A210 / A215, Ref. PSAFGU: BIOS version 1.70
  -Satellite A210 / A215, Ref. PSAEGU and PSAELU: BIOS version 1.90
  -Satellite Pro A210 / A215, Ref. PSAFHU: BIOS version 1.70
  -Satellite P200D / P205D, Ref. PSPBLU and PSPBQU: BIOS version 1.40

  REF. of the computer it is printed on a label on the underside of the case.

  Any help?

  Hello

  The Satellite * A210 PSAFGC * series seems to be a Toshiba * Canadian * series and I would recommend checking the Canadian driver Toshiba page if you want to download the compatible BIOS for your laptop.

  Here is the link to the page:
  http://support.Toshiba.ca/support/download/ln_bymodel.asp

  Best regards

• Lenovo Y510P does not start, the white screen at startup

  Hello world

  I got a Lenovo Y510P with SLI 750 m for about 1 year and 3 months now. 2 weeks (at the time, that I've upgraded to Windows 10). My laptop is suddenly unable to boot most of the time.

  When I press the power, it hangs on the initial empty screen with no logo pop up. I managed to get it started before, simply by restarting again and again, but it's been 3 days and no luck. He simply stays on a blank screen (no), although the keyboard button and the power light.

  Here are the steps I took to solve problems:
  -> Battery removed, disconnected ca, played "suppression of ephemeral power" now the power button for 60 seconds (did it this several times)

  -> RAM removed, changed slots etc. When there is no RAM, the computer continuously restarts
  -> Deleted HARD drive, reinstalled

  -> Removed 2 GPU. When the 2nd GPU is plugged in, the fan will try and turn from time to time

  -> Connectors disconnected to the wi - fi module

  -> Restarted several times

  -> Press the NOVO button, he just brings him to the white screen

  Any advice would be much appreciated. The laptop itself is in good condition and has little physical ware. Unfortunately, is no longer under warranty, and I don't know the cost to send it is quite high.

  
  

• Variation on the white screen of death - Sansa Fuze.

  I get the white screen of death, but my problem is unique in this sense: I can turn on my rocket, browse my menu and enter in the subsections of the menu, for example, Mian Menu > settings > Panel configuration, but when I click on an option, say, format, white screen, reboots of my rocket, and the screen is frozen on the logo screen.  Help, please

  Sounds beyond any help that is initiated by the user (reset, format, firmware, re - install, etc..). I would like to, or send it back if you are in the window to return to your dealer. If this is not the case, call SanDisk directly to a likely RMA replacement if it is less than 1 year old.

• Remove the white screen behind PopupScreen

  I'm trying to find the code that will remove the white screen behind a PopupScreen.  What I'm trying to do, is to display a PopupScreen that appears in front of the home screen. When I create my application, I get my popup, but there is a white background that is blocking everything.

  I have to make the white background transparent?

  I use Application instead of Application, given that my code will not run with just Application

  * NEW FOR BLACKBERRY DEVELOPMENT * bare with me if I'm not concise

  Check out this thread:

  http://supportforums.BlackBerry.com/T5/Java-development/how-to-do-a-terms-and-conditions-popup-and-s...

  E.

• I tried to download photoshop but its never stuck on the white screen with the loading squares. (MAC)

  I tried to download photoshop but its never stuck on the white screen with the loading squares. (MAC)

  WHITE cloud screen http://forums.adobe.com/message/5484303 can help

  - and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

  - and step by step http://forums.adobe.com/thread/1440508?tstart=0

  Mac https://forums.adobe.com/message/5470608 spinning wheel

• Reinstall Leopard after the white screen?

  I have an iMac that came with Tiger. He upgraded to Snow Leopard and Lion.

  Today it froze with the rotation of death beach ball. Off with the power button, it starts. That he is a white screen, no edge start-up, no logo. also, one or two attempts resulted in a circle with a slash through it.

  The optical drive does not work, so I inserted the drive in an external drive and have been able to get the installation window upward. Please see the picture:

  

  The button options says there is not enough space and I need to erase and install. How can it be when it shows 112 GB of free space?

  More importantly, is that what this will solve the problem?

  If you have installed Lion you should have a recovery partition. What happens when you restart while now command-R

  Back lion to Snow Leopard, you must clear the disc. You have no backup to restore right?

• Cannot undo changes to display because of the white screen

  Laptop Lenovo G510; Windows 7

  I'm trying to set up the laptop to an external monitor via HDMI. I tried a setting, but it didn't work. However, the laptop screen went white and now I can't undo the changes.

  Upon restart, the screen works up until the start of window screen, and then it turns off as the computer continues to boot.

  Start in safe mode works, but I can't access the properties of the graphics from there.

  Tried to unplug the HDMI cable, but does not help.

  How can I report the default display settings without doing a hard reset? (It isn't my own computer)

  Ok. I solved the problem by returning to a previous restore point.

• Y560: Start in graphic mode for low-power (switchable) causes the white screen

  Essentially, when I start my laptop with graphics mode intel, I get a white screen just after Windows Startup logo. Enter the bios and change to discreet single mode works very well. Uninstalling drivers intel allows me to start the chip intel with windows default drivers, and the next logical step would be to simply reinstall them, however...

  The problem of mixture is that while several installations of graphic driver intel are listed in the Lenovo support box, only one of them seems actually contain graphics drivers, with the rest just install the drivers of Power Boost for the processor, and even then, I still get black after installation screen. Worst of all, there seems to be no Intel video driver on the recovery partition. I'm really at a loss here. I can live with only mode high power of work, but I want to solve this problem.

  Problem solved.

  Did a forum search and downloaded informal solution of Leshcat. Solved my problem and got a new version of the ATI drivers which is available on the Lenovo site out of it. A little sad that Lenovo may not get their shit straight, but whatever.

• Update of Microsoft showing the white screen

  I have a problem with windows update, it shows a white screen with #ElementModuleHeaderText #.
  #ActionCustomInstallImportant #.
  #ActionCustomIntstallOptional #.

  and that's it nothing else, the page is empty, don't cancel anything. You have any ideas what it could be and how to fix it?  Thanks for the help.

  I have not downloaded anything in recent weeks, and I can say no updates have been installed for a few weeks.

  Hi Whizzie,

  Welcome to the Microsoft Vista answers Forum!

  You can try the steps below and check if the problem is resolved.

  Step 1: reset Windows Update components .

  To reset the Windows Update components, you can follow the link provided below.

  http://support.Microsoft.com/default.aspx/KB/971058

  If the solution provided above does not resolve the problem, you can follow step 2 to perform a clean boot.

  Step 2: clean clean boot .

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  If the problem is resolved to check what is the cause of the problem, referring to the link given below:

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click Start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on Continue.On the general tab, click the Normal startup option, and then click OK.

  When you are prompted to restart the computer, click on restart.

  Hope this information is useful.

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Sansa Fuze stuck on the white screen after disconnecting.

  Once I unplugged my Sansa Fuze on my PS3, it got stuck on a white screen. None of the buttons worked and I couldn't turn it off. I decided that the only thing I could do was to let the battery die and charge it again. Finally, he died and I plugged it in, it loads to full is the same thing. So I tried again, except I only left it plugged in for a while and disconnected. My music has arisen and it seems to work, but it stops immediately by the lack of power. Now no matter what I have plug in, it lights at all. I connected it to my computer and installed the drivers for it, but the rocket itself did not come, and the computer says it has malfunctioned and pilots have not been recognized. So now I can't listen to my music or anything like that. Help?

  Drag the spring-loaded power switch in the highest position for 20-30 seconds. (note that in extreme cases it can sometimes it may take a minute). Release and see if it boots normally.

• The white screen help

  I'll take my 4 GB fuze and the display went dark. I've disconnected from the computer and then view in white. I tried to reset by holding down the button market / stop, but nothing changes. I plugged it in to the computer and still a white screen.

  Is there something I can do?

  Firmware is 1.02.2b

  Try setting the lock, then move it out of position and then Lock now from a position of strength. I used to get it too much before 1.0.2.26A and here's how I fixed it at the time. It would happen only if I left that it plugged in all night. After repair you, update this firmware!

• My PC always turns to the white screen.

  My laptop screen is always white screen, some time at the start and some time in the workplace. Then I found this Web page and run the fix certer. Once I enter the product ID (from Control Panel - System). But the microsoft web does not recognize the Id.

  All my softwear on my pc are genuning. So what's the problem?

  Hello

  • ·         You made changes to your computer recently?
  • ·         You get the error message? If Yes, what is the exact error message?

  Method 1:

  You can try to perform a clean boot to verify the wherther to third party services are causing this issue. See the link below to perform a clean boot.

  http://support.Microsoft.com/kb/929135

  Note: After completing the clean boot make sure you follow step 7: reset the computer to start as usual

  Method 2:

  Maybe it's that your computer is affected by virus and malware. I suggest you run an online anti-virus scan and a scan for Malware. See the link below.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  I would also say to uninstall the drivers of the graphics card and then check if it works fine or not

  Concerning

• System does not boot, get the white screen after preparation for auto repair

  Hello

  I have a Toshiba Satellite with Windows 8 and yesterday there were some ongoing update and must restart.  When the computer reboots, it took some time and then I got a blue screen (very quickly) who said something as she encountered a problem and needs to fix (it is really fast and I can't see the whole text).  Then goes and comes back as it is booting (with the toshiba logo) and he says prepare auto repair.  Then it goes to a white screen. I tried to get into the HARD drive recovery (power with F12) and when I select HDD Recovery and confirm Yes, it just goes to a blank screen.  I went into the Setup utility (powering now F2 while) and has chosen default install and who does not either (although it has fixed the problem with my keyboard backlight does not). Support of Toshiba said that it is the operating system, not the hard drive.  But I need a drive recovery media that will scan all.  Anyone know other options?  I have a disc of recovery of a Microsoft coming 8 Pro (dell).  Would it be an option, to use it (I got it on a flash drive) and start-up of that?  Thanks for the help.

  Hi John,.

  Thank you for the update.

  Given that you want to use the Windows 8.1 recovery disk, you won't perhaps able to start Windows 8 using Windows 8.1 because the computer may not be able to find the files of Windows 8 start to recover.

  Yes, you pouvez install 8.1 Windows using the recovery disk. However, you may not be able to perform the upgrade option when installing Windows 8.1. When you click install now and follow the instructions, you must choose the Custom Advanced option to continue installation. Choose Advanced custom options will create a folder in the C: drive (or any other partition when you do not want to install) named the Windows.old folder which expected to have all of your files and documents of previous installation and are accessible.

  Make sure you have the drivers available for the devices installed on the computer as network card, drivers etc. of video card you install Windows 8.1.

  Hope the information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  Thank you.

• Captivate 9 after SWF publish showing the white screen.

  Hello

  I tried to publish captivate v9 in a swf file but comes up with blank info showing only model. Without any text to images without animation nothing...

  All I get is a white screen. I do not use a quiz, I have my own pictures of navigation so I'm not using a playback bar either. It worked up until yesterday, but not today. All I've done is added animation.

  If you can help please? Thank you

  

  Thanks Rod, yes I did too, but nothing helped.

  But it seems to have stumbled across the solution. So, I had a reading before bar and them that we decided to have us nav buttons.

  because I had a previous button sitting in the footer at the beginning of each slide and its idle state came after 2.4 seconds since the beginning of the slide, all images, text, after that were not displayed. I am a user of Camtasia, but my company is now using Captivate doing a bit of cross skilling here...

  Good to know that help is just a question away...

  Thanks... but now I need to make sure that nothing else is broken... Thank you