the Windows Installer is not be accessible. Windows Installer is not correctly installed.

Similar Questions

• Windows Installer is not correctly installed

  While trying to install updates for Adobe Reader (current version is 9.3) failure, asking me to run Adobe Reader repair.  Then tells me that Windows Installer is not correctly installed or does not.  This is a 64-bit of Windows Vista Dell computer.  The same error message also appears with MS Office updates.

  We will try to repair Windows Installer (I guess it was properly aiinstalle at a time or you would have had a lot of problems other software installation).  We will try the Windows Installer Cleanup utility at:http://www.softpedia.com/get/Security/Secure-cleaning/Windows-Installer-CleanUp-Utility.shtml and see if that solves the problem.

  If this does not work, what is the EXACT message you get on Windows Installer and when does it appear?  When the problem started?  Which version of Windows Installer you are using and which version has problems?  A new version has been installed recently, and it is this new version with the problem?  Which version of Vista you are using (for example, 32-bit Vista Business SP2)?  What are you installation requires Windows Installer, which causes this problem (name and version of the program)?

  I hope this helps.  Keep me updated, and please answer my questions in your next reply if necessary.

  Thanks and good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I tried the license of my trial version of photoshop elements, but the download is for windows and I use a mac.  Secondly, I get an error message saying that the serial numbers provided by Adobe in the received email are not correct.

  I tried the license of my trial version of photoshop elements, but the download is for windows and I use a mac.  Secondly, I get an error message saying that the serial numbers provided by Adobe in the received email are not correct.

  Regarding the download, the correct trial version going, you should be able to manage on the link below.  If you have made a purchase and bought a Windows license so it is not valid for a Mac installation.  You will need to contact the Support from Adobe when they go bacvk vacation to see about getting the correct license.

  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 14: http://prodesigntools.com/photoshop-elements-14-direct-download-links-premiere.html

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Get help from cat with orders, refunds and exchanges (non - CC)
  http://helpx.Adobe.com/x-productkb/global/service-b.html ( http://adobe.ly/1d3k3a5 )

• Failed installation error Code 80070490 Windows Vista update KB976098. How to install this update or keep the windows to try to re - install?

  Failed installation error Code 80070490 Windows Vista update KB976098.  How to install this update or keep the windows to try to re - install?

  http://support.Microsoft.com/kb/958044

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Media Player does not correctly installed

  

  I have re installed and it came again.

  I have windows 7 home 64-bit

  He worked until a few months ago. My music playing in windows media center, but not in media player. This box pop up appears when I try to open it.

  The calendar clearly suggests that the wmp update has not been installed properly...

  The SFC tool may be able to sort out this point, but there is a more simple operation first try...

  Go to the page of support at this link and run the "Fix It" tool... it can do the trick...

  http://Support2.Microsoft.com/mats/windows_media_player_diagnostic/

  If not, then use the SFC tool... Carefully follow the instructions - it will take some time to run.

  http://support.Microsoft.com/kb/929833/en-us

  Let us know how it goes - R

• My CS3 does not correctly install on Windows 10.  Is there a solution?

  My CS3 does not correctly install on Windows 10.  Is there a solution?

  Cloud & Win10 https://helpx.adobe.com/creative-cloud/kb/Windows_10_compatibility_FAQ.html

  -In addition, only CURRENT products will be tested and updated for compatibility with Windows 10

  - so if you have an older program, update you to Windows 10 at YOUR risk of problems

  First of all, that the software is old enough so that it does not at all with Windows 10... but

  An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

• Photosmart Premium C309-g: the drivers and the printer software will not be installed.

  My network all-in-one Photosmart Premium C309-g worked very well on my desk until recently, when suddenly the HP software could still see and connect to the printer, but Windows 10 could not. I tried to remove the printer and uninstall all associated software, then tried to reinstall the software. Unfortunately, the installation will not get to the point where it starts and then suddenly disappears with no trace of her still running in the background. I can deviate from the default installation and bring to the top of the page to select the components that I want to install, but when I do the button 'ok' on this page does not work. No matter how many times I click on it, the page remains open and the installation will not so fast. If I click Cancel on this page, it disappears and the installation back to the previous page, where I can choose to continue and happen almost immediately out of sight again. This happens whenever I try to install selected software and drivers. I deleted the printer from the devices page in the Panel, I made sure to this it is not is more listed in the Manager of peripheral devices (printers and imaging devices), I removed the Windows 10 print queue and I deleted all the data of the folder under the Program Files (x 86) HP folder on my hard drive. I also disabled Windows Defender and run the installer as administrator, yet none of these steps help the process at all. I have never, in my 20 + years using nothing other than printers HP, encountered a problem like this. I'm used to receive error messages during the installation of software to fail, but I have never had a process simply disappear from the computer without leaving any trace of never having run. I hope that someone out there has an idea, that I have not thought yet, transferring files to my tablet to print from becomes a pain in the rear.

  A man who took the freedom of another man is a prisoner of hatred, he is locked behind bars of prejudices and narrow-mindedness. I am not truly free if I take freedom away from someone else, as surely as I am not free when my freedom is taken from me. The oppressed and the oppressor similar are stripped of their humanity.
  ~ Nelson Mandela

  Welcome to the HP Forums @GarfieldFan1969,

  I understand the printing software will not fully installed for your Photosmart C309 on your system Windows 10, and I wanted to answer with my suggestions for trying to help! Here are my suggestions for you to try. When you are finished, please let me know the results and problems or errors that you may encounter!

  First step: clean boot, restart the PC and try the install again.

  1. start by typing "msconfig" in the search box of Cortana, and then click MSConfig (run command)
  On your keyboard press Windows + R key at same time and type Msconfig in the run window, and then click OK or press ENTER.

  2. now, choose Selective startup

  3. Remove the check of the Load Startup items

  4. click on the Services tab

  5. check "hide all Microsoft Services" and then click on disable all

  6. click apply , then OK

  7 restart the PC and temporarily disable firewalls or antivirus programs

  8 run the Installation Wizard for Windows HP printer to install the printer

  9 turn on the firewall and start services

  Second step: you unregister and re-register the Windows Installer Service:

  1. hold down the Windows key + R to fill the box "Run" and type cmd.exe, and then click OK.
  2. at the command prompt, type msiexec /Unregister , and then press ENTER.
  3. at the command prompt, type msiexec/regserver, and then press ENTER.
  4. at the command prompt, type exit and press ENTER to close the command prompt.
  5. run the Wizard for Windows HP printer installation

  Step 3: run System File Checker Scan (up to 3 times) to repair the corrupted system files:
  1. go to start
  2. type CMD
  3 right-click and run as administrator
  4. to check and repair the OS type sfc/scannow (note the space between sfc and ' / ')

  You may need to run this upward to 3 times to solve all the problems

  When finished, it will say one of three things
  Windows did not find any breach of integrity (a good thing)
  Windows resource protection found corrupt files and repair the (good)
  Windows resource protection found corrupt files but was unable to fix some (or all) of them (not a good thing)

  Try to reinstall the printer.

  Step 4: activate the built-in Windows administrator account

  source

  1. first of all, you'll need to open an administrator mode command prompt by right-clicking and choosing "run as Administrator" (or use the shortcut Ctrl + Shift + Enter in the search box).

  Note that it works the same in all versions of Windows. It just search for cmd and then do a right-click on the icon of the command prompt in the start menu or the boot screen.

  

  2. If you are in Windows 8.x or 10 you can click on the Start button and choose to open a command prompt in this way.

  

  3. now type the following command:

  NET user administrator / Active: Yes

  

  4. you should see a message that the command completed successfully. Log out, and you will now see the administrator as a choice account.

  (Note that this screenshot is for Vista, but it works on Windows 7 and Windows 8 and Windows 10)

  

  You will notice that there is no password for this account, so if you want to leave it enabled, you must change the password.

  Try to reinstall the printer.

  

  Testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.

• When I try to open streets and trips 2011, I thought that the registry files are not correct.

  HI, I keep trying to install streets and trips 2011 on my Windows 7 computer.  The installation files say it is installed correctly but when I try to open, I get an error message that the registry files are not correct. Must re-run Setup. It is a brand new program that I just bought.  What is going on?

  original title: streets & trips 2011 will not be installed. Incorrect registry problem files. Windows7

  You're more likely to get a useful response to the Highway, Streets & Trips, MapPoint Forum

  Good luck with it,

• "The network adapter is not correctly configured to use the ip Protocol" problem on Vista

  Hello. My PC has recently came across this problem "the network adapter is not correctly configured to use the ip Protocol", every time I click on diagnose & repair. I don't know how to fix it. Please help, thanks in advance. Magic

  Hello X-x_MaGiC_x-X,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Try the rest of the stage in this article:

  System restore points are created automatically when the following occur:

  • When you install a new application or driver.
  • When you uninstall or install some programs.
  • When you install new updates
  • Automatically on a daily interval
  • Manually by creating a.
  • If you choose to use system restore to restore to a previous restore point, System Restore creates a new restore point before you restore a previous state in case something goes wrong. If you are restoring to a previous state in Mode without failure, a restore point will create for the current state.

  So that the restoration of the system to work, you must have 300 MB of free space for each hard disk that monitors the system restore. System Restore will also use up to 15% of disk space on each disk that it monitors. That hard disk space runs out, older restore points will be deleted as newer ones. It is also important to note that you must be logged in as an administrator in order to use the system restore. Now that you understand the basics of the system restore, you must continue to the next section to learn how to use it.

  Restore Windows Vista to a previous state

  In the case of a problem on your computer that cannot be solved by normal means, you can restore your computer to a previous working state. To do this, you need to start restoring the system so that you can choose the restore point to restore. If you currently have Windows Vista boot problems, you can use the system restore in Windows recovery environment. Instructions on how to do it in this tutorial can be found: System Restore using the Windows Vista recovery environment.

  If you can connect to Windows Vista, you must follow these steps.

  1. Close and save any documents that you have opened.
  2. Click the Start button to open your Start Menu. The Start button looks like this:
  3. When the Start Menu open click on the menu option all programs.
  4. Click once on the Start Menu Accessories group.
  5. Click once on the System Tools Start Menu group.
  6. Click once on the icon of the system restore. After you click the icon, if a user account control window opens, click on the button continue.

  You will now be on the screen as shown below in Figure 1 system restore. From this screen, you can specify the restore point that you want to restore.

  1 screen of system restore

  By default, Vista will be already selected the restore recommended option. This restore point is one followed a new pilot program, or update has been installed. If you do not want to use this restore point, you can click on the button next to start the restore process. On the other hand, if there is a more recent restore point that you want to restore you should select choose a different restore point and press the next button. This will bring you to a screen, as shown in Figure 2, which contains a list of all available restore points that you can restore.

  2. the list of available restore points

  You must select the restore point that you want to restore, and then press the button next to start the restore process. Vista will display a window showing your selected restore point and asking you to confirm that it is that you want to restore.

  3. confirm the selected restore point

  If you want to select a different restore point, press the Back button. Otherwise, you can press the Cancel button to exit the system restore or the button finish to begin the restore process. If you have selected finish, Vista will display a second prompt asking you to confirm that you want to continue restoring.

  4. second Confirmation

  If you are sure you want to restore, then press the Yes button. Vista will now log you off the computer and start the system restore process, as shown in Figure 5 below.

  5. restoration of a restore point

  When the restore is complete, your computer will be restarted and when Vista starts it backup will be restored to its previous state. When you open a Vista session for the first time after the restore, you will see a message indicating that the restore was successful.

  6. system restore was successful

  If there are problems with your computer because the last restoration, you can return to your previous settings to ebb in the system restore utility and select Undo system restore by pressing the next button.

  7 undo the last system restore

  Your computer should now work correctly again.

  With the help of the restoration of the system in the Windows recovery environment

  Manual creation of Restore Points

  As mentioned previously, it is also possible to create manual restore depending on points. Some popular designs to create manual restore points are when you have your computer configured perfectly and I would save the State in case of problems in the future. To create a manual restore point, you must follow these steps:

  1. Click the Start button to open your Start Menu. The Start button looks like this:
  2. Click on the control panel menu option.
  3. Click the option menu system and Maintenance.
  4. Click on the system menu option.
  5. Click on the System Protection in the list on the left.

  You will now be at the System Protection tab in the system control panel. This tab allows you to enable and disable the system restore as well as making the new manual restore points.

  8. the System Protection tab

  To create a manual restore point, you must click on the button create. When you press this button a prompt asking you to give a title to this manual restore point.

  9. Enter the manual restore point title

  Type a title for the manual restore point and press the button create. Vista will now create a restore point manually and once finished, post a notice that it was created successfully.

  10. Manual restore point has been created

  Now that you have finished doing the manual restore point, you can close the system window.

  Try to download the correct and up-to-date drivers.

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Converter Standalone 4.3.0 question - Get "the specified parameter was not correct" and no source listed volumes

  Sorry - hopefully an admin can move this to the correct forum. I could find no community forum labeled converter so no idea where to post this message.

  My first time trying to use the converter. Use the latest version of the Converter 4.3.0 to try a P2V by using the source computer. This is a laptop Dell D820 running Windows 7 Ultimate x 64 business. I chose the source machine and all the default settings. Destination product is VMware Workstation 7.x and target files are either local or to a port USB drive (tried both). In the last step, I get a yellow bar with the error "the specified parameter was not correct" "but the following quotes are empty and presume it suppose to say the name of the setting.» The only thing I see that is suspect is that if I click on change in section 'Data copy', the list of volumes and empty and assume that shouldn't be. The sample video to get advice on the use of converter on VMware support sites show a volume listed here. I tried the same approach on a completely different system under Vista SP2 and still no volumes appear so maybe it normal?

  No idea what I am doing wrong? I did export logs and watch and it appears no volume information has been captured (a lot of & lt; destroyed & gt ;) but even once, just guessing.) Any advice would be appreciated greadly.

  Thank you

  Don

  I had the same problem on a Win7 x 64 machine... There was no listed disk to convert.

  I managed to solve the problem by running the converter as an administrator. Right-click on the Desktop Converter icon and select run as administrator.

  The disks appears and you can select which can be the converter.

• What should I do if my computer says that the DVD player is not correctly?

  Problem with the DVD player:

  It shows that the DVD player is not correctly.

  What should I do?

  Please, help me to solve this problem with DVD player: it shows that the DVD player is not correctly. And it is not ejected.

• I'm paying for telephone folios and the 1800 number that is advertised on the shopping cart is not correct - what number I ring in Sydney, Australia

  I'm paying for telephone folios and the 1800 number that is advertised on the shopping cart is not correct - what number I ring in Sydney, Australia

  Do you mean you want to buy downloads additional folio? If so you are a Pro user or company, connect to your DPS dashboard and click on the "Contact Support" link at the bottom left

• The specified parameter was not correct: ".."

  Hello

  I am using VMware vCenter Converter Standalone to virtualize a few physical servers on an ESXi server.

  I installed ESXi 4.1.0 on a new server (quad core 2 processors, 48 gb of ram, a mirrored raid (where is the ESXi software) and a raid 5 for virtual servers).  I've already enabled 64-bit virtualization in the bios of the destination server.

  The first server I want to virtualize is a small server (Nothing mission critical).   The software main is executing is SpiceWorks.  I installed VMware vCenter Converter Standalone 4.3.0 Build-292238 on the source server.

  The error that I'm left with after you run the converter is:

  The specified parameter was not correct: ".."

  Let me guide you through the steps of how I get there.

  Launch of vCenter Converter

  Click on Convert Machine

  Under Select Source Type: Tension machine

  Specify the machine 'this local computer '.

  Next

  Select the Destination Type: VMware Infrastructure virtual machine

  Server: xxx.xxx.xxx.xxx

  user name: root

  password: password for root

  Next

  Name: leave the same...

  Next

  Select localhost.localdomain

  SELECT data store: Data1 (it was created on the raid 5 group, 860,75 1 GB of free space)

  Virtual Machine version: Version 7 of the

  Next

  Check the destination parameter... Check

  Let all the suggested default values / (go play with it more that one I get a working basis...)

  Next

  Summary (see bottom of post for summary)

  Finishing

  Special presentation...

  Then I get the error message

  The specified parameter was not correct: ".."

  The error message ends actually in times of double quotes

  If anyone has any suggestions, I would be grateful.

  Thank you.

  -

  ---

  Summary

  Information source system

  Source type: slot machine tension

  Name/IP address: the machine where works the VMware vCenter Converter Standalone server

  The CPU limit: None

  The network limitation: None

  Destination system information

  Virtual machine name: xxxxx

  Host/server: xxx.xxx.xxx.xxx

  Logged in as: root

  VM folder: None

  The host system: localhost

  List of resources: by default

  Power after the conversion: No.

  Number of processors: 2

  Physical memory: 3584 MB

  Network: Preserve County NIC

  NIC1 connected

  The VM network

  Type of disk controller: Preserve source

  Storage: The Volume of cloning-based

  Data configuration files store: Data1

  Customization of the destination

  Synchronize changes that occur during cloning: No.

  Install VMware Tools: No.

  Customize the guest operating system: No.

  Delete restore points: Yes

  Reconfigure the virtual machine: Yes

  in step 3 you can check to see if all volumes can be copied?  Just to make sure that it is a disk volume to move...

  The error should be something between the two tick marks, which is not double quotes.

  He complains that a value is null, rather than not null.  So, in step 3, make sure that nothing is missing.

  Kind regards

  Jon Hemming, b.SC., RHCT, VMware vExpert 2009
  http://Twitter.com/vJonHemming

  If your question or problem has been resolved, please click the "right answer".  If someone helped him, please click "useful answer.

• My ipod does not correctly install when I plugged in now mobile USB keeps freezing

  My ipod does not correctly install when I plugged it into USB. Since then, my laptop keeps freezing / crashing.  Start repair found the problem mentioned but could not fix it and just send an error report.

  I tried restoring the system and installed the updates of windows, but I still have the problem. I reinstalled itunes and my AV is up to date, I can't find a solution.

  Hello

  1. are you confronted this question all the time or only when using the IPOD?

  2. What is the brand and model of the computer?

  3 Please, try to connect the Ipod to different USB ports in the back and the front of the tower and check if you face the same problem.

  Please follow the links below to solve the problem.
   
  Method 1
   
  Start your computer in a clean boot and check for conflicts with third-party software.
   
  Start your computer in a clean boot.

  
  http://support.Microsoft.com/kb/929135
   
  Note: Please follow step 7 of the article mentioned below to start the computer normally, after completing the necessary troubleshooting.
   
  Method 2

  Step 1

  What is safe mode?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-safe-mode

  Step 2

  Install this update and check if the problem is resolved.

  Update for Windows Vista (KB925528)
  
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=620

  Also try to update the latest version of the drivers your controllers USB host, on the manufacturers site.

  I hope this helps.

• The Service error Windows Installer could not be accessed. This can occur if Windows Installer is not correctly installed, can't use Windows Installer

  Original title: Windows Installer does not

  I use a laptop Windows Vista Home Basic 32-bit, and whenever I try to use a Windows Installer Package (.msi file) it gives me this message: "the Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. "Because Windows Installer does not work, I can't update anything, including Windows itself. Windows Installer used to work perfectly, I got this computer for awhile. I tried /unreg msiexec/RegServer andmsiexec, none of them worked for me. If anyone can help me, please respond.

  Kind regards
  Robin

  Hello

  I suggest you to go through the procedure described in the link by spirit X who speaks of a similar problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/the-Windows-Installer-service-could-not-be/04d54891-1547-44CA-bd09-fe4577e9ad61

  Warning: With the help of third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.