The wireless on my Aspire 5535 is all the TIME

Similar Questions

• I have 2 imacs and a laptop computer and you want to back up all three wireless via time capsule on my existing wifi network. If we can also use the time capsule as my wifi and replace my uverse wifi, that would be great. possible?

  I have 2 imacs and a laptop computer and you want to back up all three wireless via time capsule on my existing wifi network. If we can also use the time capsule as my wifi and replace my uverse wifi, that would be great. possible?

  If you want to make sure that you will be able to get the Apple support in case of problems or questions with your backups, you must use the wireless Time Capsule to back up your Mac.

  As long as the time Capsule provides a wireless signal, you can decide who to your 'main' network, then use it wireless Uverse for "guest", or children. If you do not need the Uverse router/modem wireless at all, it is possible to turn off wireless on the device and make it work only as a support modem/router...with Uverse wired.

  At this point, you can start thinking about how you want to configure things and get back in touch if you need some advice on how to do it.  We need to know what operating system that uses the Mac that you normally use to administer the time Capsule, provide good instructions, if you need it.

• Re: Satellite Pro A300-1EA - wireless connection, drop all the time

  Hi, I have a problem with my wireless connection fall all the time on my Satellite Pro A300 1EA.

  It happened earlier, but I've fiddled about a little with change of drivers and the removal of the connection settings for the registry and it then worked fine for months, until yesterday.

  There were several updates for Windows installed yesterday, but none of them have been updated driver for the wireless card, and they don't look like they should cause problems. The fact that the problem happened before makes me think that the updates can be anything to do with it.

  I use the * Intel PRO/Wireless 3945/4965/5100/5300 * for Vista 32 - bit version 12.2.0.11.3 drivers from the Toshiba download page.

  Other computers on the same access point have no problem, so I think it is specific to this laptop. The connection speed is normally 6 Mbps, but I cannot even check e-mail now without the abandonment of the connection.

  Laptop will be thrown against a wall soon if no one can help you.

  Thanks in advance.

  Edit: I've already made sure power settings are at maximum to the WLAN card, even if on battery, or what power management.

  Post edited by: mjbcrawf

  Hello

  Have you tried to use the Windows System Restore feature? After that your WLAN should work fine again.

  In addition, I can recommend the latest WLAN driver in the Intel page, it s version 12.4.xxxx. I installed the driver on my Qosmio laptop and don t have any problems with it: [www.intel.com].

  If you have any other questions, please let us know!

• my wireless adapter does not pick up all the signals... I don't know why... Please help!

  I'm not sure why I can't my wireless dlink adapter cannot pick up all signals?

  anyone enlighten us?

  Hello

  1. what exactly happens when you try to connect to the Internet?

  2. you get any error message?

  3 have there been recent changes to the computer before the show?

  I suggest you to try the steps mentioned in the link and check if this may help.

  Method 1: Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Check this link for more information:

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Hope this information is useful.

• Lenovo y50-70 WiFi reconnect all the time

  Hello world

  I use Lenovo y50-70 with processor i5 for two months. I'm just tired of trying to fix it myself this is why this post. My wi - fi is *. I upgraded my os to Windows 10 and had problem with 'limited connection', when you had to disconnect and reconnect it to work on the network. I tried many things, but lately I installed some new drivers and so far, this situation is back. But yet, there are some 'loss' connection, because when I try to play some mmo games, I get disconnected server, which I suppose is WiFi always had a problem with my laptop.

  EDIT: it's wifi card: broadcom 802.11ac bcm4352, drivers of 10.12.2015 - broadcom_wlan_7.35.338.0

  Can I please get any help? I can provide info on the plug or that, just let me know which... If all goes well there is a savior to do this, because I'm really tired of this question, and to be honest I have not expected that when I bought this machine

  Sandergin wrote:

  HI, thx for the suggestion, but unfortunately it did not help. Maybe I'll clarify the situation. Internet high speed is very high, for example when I download a file, it goes up to 4/5 mbp/s, but the problem is with the stability of the connection. As I mentioned in my first post, it is impossible to play a multiplayer game, I get the broken link all the time in games such as Diablo 3, WoW, or now in the Division. I got all new drivers, my internet provider is UPC. There is no such problems, even with regard to the internet on the phone on the other laptop.

  Any other ideas please?

  Yes, but the problem as it involves a lot of troubleshooting steps. And given suggestions is one of the first check, you need to perform. Your problem is a limited number or abandon the connection. Check the compatibility of your router with your wireless card. The setting in the configuration of the card. Change the channel you are using. If you have 5 Ghz band try this out.

  I have this problem a few weeks ago and did what the technician of the isp is to just get the details of my modem (he is very interested to scribble information it receives) and declare that my router is to blame without a test at all. After that, he leaves and drop a service for an hour with his boss. After that, I discovered that the ISP is actually to reduce latency. There is actually nothing wrong at all in the installer than some hideous moving from my ISP.

• Linksys connection shows poor all the time

  When I check my status on my connection why you say poor all the time? I also noticed that there are others that are related to my linkskys and my connection is always ' say poor. How can I get a better connection? Thank you

  Hello

  You really need to be checked in the forums for your version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  ---------------------------------------

  It is more connected to your router that are not in your household? If so, you will need to
  reset the router security. All unauthorized connections are the security risks and also use
  your connection resource. Check with the manufacturer of the router.

  Distance and other interference can affect the quality of the connection. Also check updates
  your WiFi and NIC drivers.

  LinkSys has support and excellent help. Also check the LinkSys forums.

  LinkSys support
  http://homesupport.Cisco.com/en-us/Wireless/Linksys

  LinkSys forums
  http://homecommunity.Cisco.com/community/?category.ID=Linksys

  ==================================================================

  References to Vista also apply to Windows 7.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ====================================================

  After that the foregoing: (here, the NETWORK card and Wifi are interchangeable in the sense that the two must be
  fact that you can do if you first use).

  Follow these steps:

  Control Panel - network - write down of the brand and the model of the Wifi - double click - top
  tab of the driver - write version - click on update driver (can't do anything like MS
  is far behind the pilots of certification). Then right click on the Wifi/NIC device and UNINSTALL
  -Reboot - it will refresh the driver stack.

  If necessary to download drivers on another machine and transfer on the problem computer via
  removable media such as a USB key or CD - DVD.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods
  below is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
  found)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
  (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as windows
  7 love the updated drivers.

  ======================================

  If necessary:

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet in Vista (and Windows 7)
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

• (WRT54G) I need to set it up so that I get the same IP all the time for 1 computer on my network.

  I have 4 computer I have linked to the WRT54G. 2 2 with network cables and wireless. One of these computers I use as a server and I would get the same IP address to the server all the time. As 192.168.1.150. Now it depends on when I turn on my computer what IP they get. Is there a way to get a static IP address?

  Glenn (phonograph)

  
  

• About half of the time that I go to print, I get a message that tells me to install a compatible printer. I'm really tired this. All solutions?

  I use Windows 7 with a PC laptop Dell, and the Dell wireless printer.  This happens all the time, only half.  Sometimes I have to restart my computer several times to get the computer to recognize that there is a printer.

  Any solution must be sought from the Dell support/help site that is specific to your printer model or by using the Dell printer diagnostics that have been installed during the installation of the Dell printer software

• The Explorer Microsoft touch limited edition mouse lag all the time and everywhere

  Original title: mouse late

  I just bought a mouse yesterday, (explore touch limited edition). That is fine, but my problem with this one is the answer developed. from time to time when I try to move, it lags behind which is very irritating.

  It happens in games, at the office, everywhere and all the time...

  My windows 7 (64-bit) and I have already downloaded and installed the driver recommended but not luck.

  any ideas?

  Hello

  You can perform the following methods and check if it helps.

  Method 1: troubleshoot failures in the response to the mouse or wireless keyboard:

  http://support.Microsoft.com/kb/838398

  Method 2: solve a wireless mouse that does not correctly http://support.Microsoft.com/kb/321122

  I suggest you to contact the Microsoft Hardware support for assistance. http://www.Microsoft.com/hardware/en-us/support/contact-us

  How to replace Microsoft or hardware, packs software service to order and replace product manuals: http://support.Microsoft.com/kb/326246

• Can I use the Time Capsule wireless for multiple computers without using it as a router?

  I am looking for an external backup for 2 computers drive.  I have a desktop iMac and MacBook Air.  I like the idea of being able to back up my MacBook Air wireless, but I need to make sure that it will work the way I need to.

  I already have a wireless router that works well for me, I don't need the time Capsule to act as a router. I'm just needing a wireless backup drive.  So, the question is, can I use the only time Capsule as a storage device for backup of wifi or do I also have to use it as a wifi router?  My fear is that the router service is not as good as the router, I currently have.  I live in a big House of 2 floors, making it very difficult to receive a strong signal throughout the House.

  can I use time Capsule only as a backup wireless storage device or do I also have to use it as a wifi router?

  Time Capsule need to connect to your router/modem existing using wired Ethernet wired, permanent.

  If you plan to use the time Capsule to back up your Mac with the help of the application Time Machine on every Mac, the Mac will have to save on the wireless signal Time Capsule for the process to be officially supported by Apple.

  While it is possible to turn off wireless on the Time Capsule and try to save it to your existing wireless network... and it pourrait work... but there will be no Apple support backup problems... so it would be a good idea to plan to use Time Capsule wireless backup purposes.

• I have iphone5s and my contact id does not work, all the time he show faild Setup touch id please help?

  I have iphone5s and my contact id does not work, all the time he show faild Setup touch id please help?

  Hi yjain51,

  I understand you had some problems recently with getting Touch ID to work reliably on your iPhone 5s. I know that it is a feature of great security for your iPhone, so I'm happy to help you.

  When you use Touch ID, make sure that your hands are free of any dirt or moisture so that fingerprints can be read clearly. This article explains further:

  Use the ID Touch on iPhone and iPad - Apple Support

  Thank you for using communities Support from Apple. See you soon!

• The fan runs all the time because xinetd running more than 80% all the time.  Someone else has the same problem?

  xinetd is running at 83% or more 24 x 7 devours battery in 2 hours or less and making the fan run all the time.  I am connected to a bug report, and it turns out that it was a duplicate because someone else had the same problem.  However, I have no access to the other bug report or find anything either in the discussion forums or online.  Anyone experience this problem?

  Hello gorgonzola1111,

  I doubt that someone else has this problem because xinetd does not part of macOS. Have you installed it from a package of "ports" 3rd party?

• Error all the time

  The following error keeps showing all the time. Unable to find a motive. Any idea on what this means and how I can solve it?

  "pteiddialogdaemon quit unexpectedly.

  is there a reason you are stay on 10.11.5 and not do the 10.11.6 and subsequent updated?

  otherwise I suggest you backup with Time Machine and see if the updates to the OS and iTunes fix this.

• 6 64GB iPhone - restart all the time

  Hello

  Since yesterday my 6 64 GB Iphone restarts all the time.

  There are apple journal on the screen, then screen is black and once again apple appears.

  I can't stop it, I can't go to the deskop. Nothing. Mobile phone doesn't help.

  What will happen? Please notify.

  I've read a few articles that the iPhone 6 have such problems because of the memory of TLC.

  My cell phone is 15 months old, still on warranty. I will send a formal complaint to Apple?

  Thanks in advance for any advice.

  Martin

  MY phone which does too! is it not so boring! I have an iPhone running iOS 10.0 6. Help, please

• MacBook runs very slowly, Rainbow pinwheel all the time

  A few weeks ago my Safari began to act and to quit almost immediately when I opened it, I so reset my laptop full and cleaned then reinstalled the latest OS X. It worked after that and I can open and use it, but now I started to do the rainbow reel almost everytime I try to do anything, even typing the reel has revealed about 30 times.

  In order to clarify the roulette is shown all the time even outside of Safari, when I click, I type, when I open applications, etc..

  Use the etrecheck to etrecheck.com and to see which are running on your Mac.