Theme changes automatically to Classic

Similar Questions

• Changed to Windows Classic theme

  I used Registry Mechanic to optimize the performance of my computer and suddenly, the theme changed to Windows Classic

  I can not change anything to the Windows Vista theme, and the theme file is missed

  Are there solutions?

  Click Start and type services.msc, and then press . Scroll down and locate the themes service and click on it. Then click on start or restart option in the left column. Once restarted, you should be able to select again the theme of Windows Vista in the control/customization panel.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

  Dude, thanks for the Info.

  Thank you :)

• My Windows theme changed for about 5 seconds, without me touching anything

  This is the second time that this happens in the last 6 years or so...  I got my Chrome browser open and was looking at email and all of a sudden the color of my borders changed by themselves.

  The two times it happened, it was only for about 5 seconds and then it takes up the theme that I had chosen without me or that you clicked on anything whatsoever. It was as if he changed the Windows theme Classic Blue and blue on the taskbar to the top border of the browser.

  He freaked me out both times it happened because the thought crosses my mind that someone was hacking my computer or access to remote or something, but I have remote access is turned off and I have no virus or malware that I know (I frequent scans with Avast and Malwarebytes, which both have a real-time protection) (, and I'm a surfer safe).

  Does anyone know why it happened or what causes it? It's so strange.

  Thanks in advance!

  Hello

  Thanks for posting your query in Microsoft Community.

  I appreciate your efforts taken to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. Using a laptop or a desktop computer?

  If you use a laptop, there are times that your laptop battery is low and the screen goes to the basic theme. For further diagnosis and troubleshooting on the issue, I would suggest trying the following methods and check if the problem persists.

  Method 1:

  Run this utility to display quality. It checks to see if your color grading, video effects, and above all, your display settings are correct.

  Open the troubleshooter of display quality

  If the problem persists, try the following method.

  Method 2: I suggest you try the steps suggested by Azeez N responded on July 13, 2010 in the following thread and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/wallpaper-changes-automatically-after-computer/e16738c2-1f2e-46cf-9b65-247ded591f8e

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Taskbar Windows Vista Home Premium, changed to the classic color scheme after update.

  For some reason any my menu of the taskbar and start suddenly changed to the classic system of windows.

  I am running Windows Home Premium and have attempted to reverse to the standard vista scheme through customization > window color and appearance, but has only Windows Classic as an option.

  I also right click on the bar of tasks and disappeared on properties in this way, it shows the taskbar as the standard version of Vista but the taskbar is still in basic.

  I used the diagnosis of DirectX tool tests to see if an error has caused this, but it does not revisit what whatsoever, and my laptop recognizes that it runs Windows Home Premium.

  Also tried to restart, but nothing changes...

  The only thing that I think may be linked to this is after a recent update of the last time that I closed my laptop, but I don't see what update it was.

  Any advice would be greatly appreciated!

  Here is a link to the screenshot of my problem!

  http://Tinypic.com/r/sffn0l/7

  For some reason any my menu of the taskbar and start suddenly changed to the classic system of windows.

  I am running Windows Home Premium and have attempted to reverse to the standard vista scheme through customization > window color and appearance, but has only Windows Classic as an option.

  I also right click on the bar of tasks and disappeared on properties in this way, it shows the taskbar as the standard version of Vista but the taskbar is still in basic.

  I used the diagnosis of DirectX tool tests to see if an error has caused this, but it does not revisit what whatsoever, and my laptop recognizes that it runs Windows Home Premium.

  Also tried to restart, but nothing changes...

  The only thing that I think may be linked to this is after a recent update of the last time that I closed my laptop, but I don't see what update it was.

  Any advice would be greatly appreciated!

  Here is a link to the screenshot of my problem!

  http://Tinypic.com/r/sffn0l/7

  I found that if you go to the computer, right click on it, go on manage, then go to Services on the left column, scroll down to find topics, left-click and then in the upper left of this part of the screen there is a link to restart the Service, click , click on it, it will restart the service for the themes. Once she had him restart the service for the themes, right click on your desktop, go into customize and if you change your theme, your Vista Basic theme should be back. I hope this helps someone.

• I have 3 short videos I tried emailing stuck in Outbox of my iPhone 6. They tried to send more than an hour. I can't delete them, "Change" is not available in the Outbox. How can I get rid of these so mail will stop trying?

  I have 3 short videos I tried emailing stuck in Outbox of my iPhone 6. They tried to send more than an hour. I can't delete them, "Change" is not available in the Outbox. How can I get rid of these so mail will stop trying?

  Can drag you across the message in the Outbox overview to get the Red delete button? It's been a while since I had paste an email in the Outbox, so I don't remember if that's possible.

  IF your account is an IMAP account, try to delete the e-mail on the Mac. Actions sync between devices in IMAP email, so they should be in the Outbox on the server and you should be able to get to them in the Mail from Mac application, use you it, or in a web browser on the server.

  IF this is not possible for some reason, try the mail application to the phone reboots and the closing force force the phone and then try again. Press the Home button twice quickly. You will see small glimpses of your applications recently used. Blow up the Swipe on application brief mail app to close

  To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

• How to change automatic internet connection sharing network channel

  I really need to change my internet auto channel sharing, but it is not yet an option... Can someone tell me please how to change automatically!

  It is setup for internet sharing... This is a totally different configuration... You cannot use auto because your computer is now the router... but your computer does not have a scan wireless for unused channel capacity.

• Windows 7 change automatically the compatibility on steam

  Hello

  I just had a strange error output of steam, in which Windows says it has detected problems of compatibility and changed automatically in response to this. There is no option to cancel the changes, and looking at the exe of steam, no compatibility setting have been changed.

  However, when I go to open steam now, it detects that it is in compatibility mode and does not open. Anyone has any idea how I would like to undo changes?

  I do not understand why Windows has changed the settings in the first place, as it has been working well since the RC is released.

  http://social.answers.Microsoft.com/forums/en-us/GettingReadyforWindows7/threads

  Link above is "Preparing for Windows 7" Forum.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

  Link above is Windows 7 Forum, to more technical questions about windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• How to set or change automatic backup settings

  Original title: computer

  My computer makes a noise whirring of laborious struggling. I cleaned with care, but still, it looks like a car that won't start. I'm afraid he's going to die on me and nothing is saved as backup of the island is due this Sunday. Can I replace the Sunday backup in case he dies? Any advice on what has happened to my computer works very well. A bit slow but everything ok my chap of the computer is on vacation until next week.

  Hi Nicky,

  Please contact Microsoft Community.

  If you want to change the time of backup runs, in the time list, check the box for every hour of the day you want your backup to run. Clear the check box for any time that you do not want Backup to run.

  Select one of the following options:

  • Custom. Does not set a default time for the backup to run.

  For more information see set or change automatic backup settings.

  Also as you mentioned that your computer makes a noise, I suggest you check if all cables are tied up and the CPU fan is properly cleaned.

  Meet us, then we can help you further.

• I changed to the classic Windows and cannot be changed back to Windows 7

  Well, basically, I downloaded the Wowd search engine and it totally screwed up my computer. He says to make it work, I had to change to Windows Classic, and now my windows are all blue instead of what I had clear, purple! It was like that before, that's what I want to return to: http://i117.photobucket.com/albums/o47/lpurple1500/Color.jpg and here's what it looks like now: http://i117.photobucket.com/albums/o47/lpurple1500/Appearance.jpg . How do I help please?

  Hi, I'm the VP of Engineering of Wowd. I'm sorry to hear that you had problems with the installer, but I don't think it's ours. Wowd software certainly does not ask you to change mode of Windows or other settings of Windows. The guests of the single user during installation are to accept the EULA and specify the installation directory. The program itself is written in Java and the whole user interface is run in a web browser window, so we have no vested interest in the settings of the Windows user interface.

  Are you sure that you got a real Wowd installation file? You can download it on our site? The file is signed by "Wowd Inc."?

  If so, please get back in touch with me in this forum or by email to * address email is removed from the privacy * and we will arrange access to your installation file to investigate what happened.

  -Bill

• Wallpaper & theme changes randomly - how to stop this?

  How to stop windows change randomly my paper painted & theme.

  I will customize it via Control Panel, be careful not to check several wallpapers. But he keeps between 2 wallpaper / themes & one of them autohides my taskbar.

  Don't want to have to continue to go to the control panel to update the settings!

  Hi Amerrrs,
   
  (a) don't you make changes to your computer before the onset of the problem?
  (b) when the wallpaper and theme changes it? During hibernation?
  (c) was your computer pre-installed with Windows 7?
  (d) does when working on an application? A third-party application could be causing the problem.
  (e) using a laptop? There are times that your laptop battery is low and the screen goes to the basic theme.

  If you do not want to change the wallpaper or themes, make sure that you have not set the time to change the wallpaper and theme or never put if you can.  It could be the screensaver that rises, which mask the taskbar

  You can place your computer in a clean boot State and check
   
  There could be a possibility that a third-party application conflicts and the problem occurs.
   
  You can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a 'clean boot'. A clean boot helps eliminate software conflicts.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.
   
  Follow the steps below to put your computer in a clean boot state:
   
  Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
   
  1. sign the computer by using an account with administrator rights.
   
  2. click on the Start button, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
   
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
   
  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)
   
  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.
   
  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
   
  5. click OK and then click on restart.

  Check the link to find out more below clean boot:
  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
   
  1. click the Start button, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
   
  2. on the general tab, click the Normal startup option, and then click OK.
   
  3. When you are prompted to restart the computer, click on restart.
   
   
  Post back with your answers
   
  Aziz Nadeem - Microsoft Support

• Windows 7 change automatically mapped printers group policy print drivers

  What does Windows 7 change automatically print drivers for printers that are mapped by using Group Policy?

  Print server is 2012 using drivers v3.
  Group Policy is mapping using deployed printers (computer Configuration\Policies\Windows Windows\imprimantes) printers and is spread to computers
  Printers card fine to the computer with the correct driver that is on the print server, then after a few minutes changes Windows 7 driver to one that is not yet on the print server.
  I tested this settings, first as activated and pointing directly to the print server and now as people with disabilities

  Policy	Setting	Comment
  Restrictions point and print	Activated
  Users can only point and print to these servers: People with disabilities Enter the name fully qualified server separated by semicolons Users can only point and print to machines in their forest People with disabilities Security prompts: When you install the drivers for a new connection: Do not show warning or rapid rise Updating drivers for an existing connection: Do not show warning or rapid rise This setting only applies to the: Windows Vista and later versions If anyone has experienced this? Or have any idea why this is happening?

  Hello Ronnie Jordan,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  Windows 7 IT Pro category

  Hope this information helps.

• Image theme change: Please help

  Hi, everybody, this may seem a simple operation but I tried several times and did not change a theme image (the little icon to the left with the title of the URL), see the icon 'B'.

  1. I went to the theme change theme 101, the last section is 'use a custom image', I changed it to mine and the pages still use the 'B' icon

  2. I find the icon ' bootstrap - icon.png "and replaced it with my image with the same name, still no change

  I missed something obvious?

  * you have forgotten versions: Apex 4.2.6 on Oracle DB 11.2

  Any suggestions are greatly appreciated

  seanzh wrote:

  Hi, everybody, this may seem a simple operation but I tried several times and did not change a theme image (the little icon to the left with the title of the URL), see the icon 'B'.

  1. I went to the theme change theme 101, the last section is 'use a custom image', I changed it to mine and the pages still use the 'B' icon

  2. I find the icon ' bootstrap - icon.png "and replaced it with my image with the same name, still no change

  No wonder that it does not work as the two are not connected somehow.

  A custom Image theme appears in the display of the icon of the page of the theme of shared components.

  The small picture in the browser's address bar is a favicon, which can be implemented in the APEX page template.

  Create icon in ICO format image, upload it to your image folder or the APEX repository and add

  in the element of the required page templates, change the href URL for your applications.

  If you have only a single application / want the same icon for all your applications and you have access to the folder root of your site, you can simply locate the favicon.ico in the folder root without add link shortcut for page templates icon.

• Definition of custom alarm == > changes automatically Green State?

  Greetings,

  I set two alarms for preventing me from certain actions (like opening a console to a virtual computer), that works. However the alarm also changes the "status" of the machine to "alert" until I have manually reset the alarm green or 'normal '. Is it possible to run a command that sets the virtual back to normal computer or even better, not change the State of the virtual machine to "alert" when an alarm is triggered?

  I know, it seems logical that this is not possible, but you never know.

  Thanks in advance,

  Bram

  If there is an alarm representing a State he should change automatically as soon as the alarm has disappeared. But if there is an alarm represents an event, why should he disappear automatically? By confirming the alarm, you show that you recognized.

  Open a console is an event, not a status. Try to set the status not to alarm but normal, vCenter should show nothing then, but maybe you get triggered action (if you defined one).

  If you keep it as an alarm or warning, you need to confirm.

  AWo

  VCP 3 & 4

  Author @ vmwire.net

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• Why the menu items change automatically?

  As I'm changed some stuff around on my test Business Catalyst site, I noticed that if I change the URL of a given page (I've changed the 'Shop' page to / sponsor), the menu item URL has not changed automatically. I don't even know the name of it has changed (I can understand as a 'function'). I thought it was a reason to use a CMS like this, that a lot of things like link exchange occur automatically. I'm sure other CMS like Drupal and Joomla do this automatically. There are chances that this will change in the future? Or maybe there is a reason why it's like that I forget?

  Thank you!

  Hi umiwangu,

  In my experience with BC as well as other systems, it is important to note that the pages and menu items are separated from each other.

  When a user creates a page it is not automatically added to a menu. Similarly, when a user changes the URL of a page that has been added to a menu, the menu item URL in question not is not updated automatically.

  So, if you changed a URL of the page that ends by "/ shop" to "/ sponsor ' you should be able to easily view this new URL in a browser. However, if you want the menu item that is linked to the old URL to reflect the new URL, then you will need to change the URL of item of the menu so they can talk to each other in the future.

  Yes, it's an extra step (crucial) update your menu items, but (in my experience) URL decisions are not something that is changed frequently - especially when it comes to SEO.

  In any case, I hope it helps! -Alex

  PS - If you haven't already, you can check zero to hero of gurus of the BC. They put together a huge set of training Sessions of BC (FREE) that are amazing!

• Changes automatically color HEX

  I changed some text hex: #808285, but it changes automatically SPELL: #7F8185.

  You can see that they are a little different colors:

  http://www.COLOURLovers.com/color/808285/

  http://www.COLOURLovers.com/color/7F8185/

  Why Fireworks do this? I use version 10.

  In addition, Adobe has no newsgroup access more?

  Thank you very much for your help!

  I can't FW to do. Can you please the specific steps. You select text, change he colors via the property inspector, click the color block once again and the color change?