Theme generator 6: error icons support

Similar Questions

• Cancellation of registration user stored in the shift register event generates the error 1 if Subvi runs intermittently

  Hello

  I'm trying to understand the behavior of the attached excerpt from a larger overall vi functional.

  In a State, I'm generating a user event and in a State later unsubscribe from the event and destroy it.

  Now, if I went through the VI together in one step (i.e., step through events? set to FALSE), the VI runs without generating an error. However, if I run the VI by intermittent and output after each execution of the loop, the vi generates error 1. Why is it so? Please notify. Thank you.

  Peter

  Why are you registration and deregistration of events user, but you have no event structure in your VI who use them?

  When you run events, probaby the event you registered disappears when your VI stops running.  If you were able to keep your VI in the foreground running, then the life of the event would persist.

  The event number still exists in the uninitialized shift register, but it does not say more once your high level VI stops and you get the error 1.

  If it was really a global functional VI, you would terminals connected to the connector table in your VI, you would call this as a Subvi as part of a main VI and life event would persist and you wouldn't mistake 1.

• I tried change Classic theme but get error "the visual style clould not be loaded because the file failed to load"

  I have a problem with my windows xp theme. I have catchy to change Classic theme but theirs aren't Exchange and I apply another theme there is error "the visual style clould not be charged because the file failed to load" and I'm windows resulting in normal but agin theme same error. Please tell me the solution.

  Hello

  Please follow the steps below.

  Method 1:

  Run the tool from the link below System File Checker.

  http://support.Microsoft.com/kb/310747

  Method 2:

  Try to create the new user account and check if it works very well.

  http://support.Microsoft.com/kb/811151

  See also the below mentioned link.

  http://support.Microsoft.com/kb/555512/en-us

• Print to Adobe PDF format generates the PDF, but also generates an error entry in the print queue

  I am running Windows Vista Ultimate Edition and Adobe Acrobar 8.
  Whenever I print a document in PDF format, the PDF document is generated correctly.
  Unfortunately, it also generates an error entry in the Adobe PDF print queue. At each system restart Windows Live One Care detects errors and ask me to fix.

  Hello Pino Sannicolo,

  Try to check your print to the printer settings. Right-click on the printer, and then click Properties. Click the Advanced tab and then click on "print directly to printer". Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Help-Code for one or more InDesign cannot be generated. (Error 400: font not available).

  Hello

  I have the last Version of Muse in a Mac. Yosemite.

  I have problems when I want to publish my Web site. It appears error 400.  For some reason, the code cannot be generated for Typekit. That s the German version. "Code for one or more InDesign in"Homepage"cannot be generated. (Error 400: font not available).

  

  A time comes this: publish the view have an error, because the Muse may not have an HTTP connection. It may be a software firewall that does not allow to connect. The main reason may be a software firewall that stops the HTTP connection. Probably you should check the Firewall properties.

  

  

  But nothing has changed.

  I did the following things:

  1. I'll raise the app
  2. I disconnect from the creative cloud, leave, reconnect and reopen Muse.
  3. I remove Ghostery.
  4. Muse I uninstalled and re-installed.
  5. Restart the computer.
  6. Try again with a new Web site.

  It's my current antivirus

  

  Help please! Need to finish a project.

  Looks like you have anti-virus/anti-malware with settings that prevent Muse to connect to internet. Your screenshots are not visible on the forum. They must be inserted using the response within the forum feature in your browser (click the camera icon to add an image).

• Try to update CC Bridge and Photoshop CC 2014 generates the error "failed to extract the downloaded files. Press Retry to download again. (U44M1I210)

  Try to update CC Bridge and Photoshop CC 2014 Creative Cloud program generates the error "failed to extract the downloaded files. Press Retry to download again. (U44M1I210). I am running Windows 7. Previous traffic on this subject did not help my situation.

  Please clean the cache of the MAO by deleting after the contents of the folder:

  For Mac:

  ·        /Volumes/%volume Name%/Users/%Username%/Library/Application Support/Adobe/AAMUpdater/1.0

  To win:

  ·        C:\Users\\AppData\Local\Adobe\AAMUpdater\1.0

  Then try to run updates.

  Kind regards

  Ashutosh

• Error - exception error not supported for user - Help!

  Hi all

  I get an exception error unsupported to the user in a part of my page is refreshed after encountering a validation error.  Validation is managed properly, but when the page is refreshed to display I get an exception error not support for the user for the following code (generates the value of the element on the page):

  < code >

  Select nvl (sum (po_details.po_det_amt), 0)

  of po_details

  where po_details.po_id =: P230_PO_ID

  and po_details.wbs in (select distinct wbs_number_id of wbs, project

  where wbs.vendor_id =: P230_VENDOR

  and substr (wbs.wbs_number_id, 1, 6) = project.wbs_sequence

  and project.project_number = nvl (:F101_FPC_NUMBER,project.project_number));

  < code >

  When the code retrieves a single value, the following post calculation calculation of:

  < code >

  to_char(:P230_PO_AMT_FPC,'FML999G999G999G999G990D00');

  < code >

  Generally, the process works.  It is only when a validation run which prevents the removal of a purchase order that I encounter an error during a refresh of the page.  I get an exception error unsupported to the user for this calculation.  I'm puzzled.

  Any ideas?

  to_char(:P230_PO_AMT_FPC,'FML999G999G999G999G990D00');

  AFAIK - all within the APEX bind variables are of type VARCHAR2

  That means - you are implicitly expressing a string to a different data type just to cast to a string.

  So: this code is completely useless and adds more complication to the mix only what you need.

  It is very possible that Oracle is trying to convert a DATE... (which will fail)

  I put either the FORMAT for the type of element to match what you need or make the conversion from the string in your SELECT statement.

  for example

  Select to_char (nvl (sum (...), 0), "FML999G999G999G999G990D00")

  If you still get a 'user defined error', it is likely to be lifted since within the procedure used to remove the PO.

  See the DEBUGGING within the APEX pages to check exactly where the error is thrown.

  (it sounded like you already did and have reduced in to_char() section)

  MK

• HTTP ERROR: 404 /support/downloads/dlm/main.jsp

  I get this error

  HTTP ERROR: 404 /support/downloads/dlm/main.jsp

  When I logged into my account and I try to down load CS3 that I bought years ago. I removed most of the programs of my macbook since I wasn't with them.

  Now I want to reinstall CS3 (in particular from the Indesign program) my account has the serial number appears.

  But all the CS download page links have the above error code.

  There is no product for me to download.

  Can anyone help?

  Thank you

  Try another browser if you have a problem with the link below.

  Downloads available:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 5.7.1. 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• ERROR: No supported CPU installed, HP P6310F

  HP p6310F

  Windows 7 Home Edition

  ERROR: No supported CPU installed

  CPU replacement

  Hello!  I replace the CPU in my HP P6310F.  According to this literature, http://support.hp.com/us-en/document/c01949155 , I have an AMD Phenom II X 4 Quad-Core 9xx/9xxe/8xx (Deneb).  My understanding has always been that "9xx" means any phenom II in the class of the 900 series.

  I bought a retail Phenom II X 4 965 Black Edition, part HDZ965FBGMBOX number, installed and get the error message: CPU support is not installed message.  After searching and reading about the error message and other messages, it seems it might be due to the 'black edition' and/or because it is 125 watts.  It was the answer to a few others in the same situation as me.

  Can you please tell me why this CPU is not compatible and please help me with a list of compatible CPU?

  This is also in the 9xx series, but is it at 125W

  HDZ955FBK4DGM AMD Phenom II X processor 4 955 - Quad Core, 6 MB of Cache L3, 2 MB L2 Cache, 3.20 GHz, Socket AM3, 125W, fanless, OEM

  This lies in the 9xx series and is 95W

  AMD HDX945WFGIBOX Phenom II X 4 945 Quad Core Processor - 3.00 GHz, 6 MB of Cache, bus front to 2000 MHz (4000 MT/s), retail, Socket AM3, processor with fan

  The stock processor is an AMD Athlon II X 4 630, 95W

  I can provide any other information you may need, thank you very much!

  There is no AMD Black Edition CPU that are compatible with any PC HP desktop.

  That's what the problem is related to. Black Edition CPU are special processors who have discovered the multipliers for amateur quality motherboards. You could not access the multipliers to overclock the CPU with the motherboard you have installed it anyway.

  Even if you choose, buy and install one of the microprocessors in maintenance & service Guide there is no guarantee HP which will be exploited.

  You should also be aware that installing a different CPU than your office has been delivered with the warranty.

  Sorry to bear bad news.

  The good news is that the processors listed in the maintenance department & guide reputable reports of upgrade in discussions in the forum, to run.

  Best regards
  ERICO

• How to simplify the code to generate custom error codes and messages

  I designed a vi that generates the error when any data entry is missing, it works correctly, but the problem is that I want to simplify, because it is part of the main program and its block diagram is great to use as such (I tried to use this vi as a Subvi in the main program, but that does not work correctly) so I need help to simplify the code or if there is no other better medium to generate the error message.

  Hello

  As shown in the previous example, to a different question of yours, it is always good to reduce with diagrams of huge block with repeated code.

  When you overwrite functionality even repeated several times, put it in a loop and run it to have recurrences of 4 or 5 of the same code.

  It will be evolving in the future.

  joined the vi changed for you.

  Note: when you want to simplify your program, isolate your code in functions, put each function inside a under vi.

  in your case, you can have the control to an empty string for all channels within a Subvi. build an array of strings and go through the subvi. Control in the sub that VI is that strings are empty.

  an array of Boolean output error. build your error string in another under vi. the wires together.

• Msinfo32.exe generates an Error Message "cannot collect information.

  Hello

  I am running XP Prof with SP3 and made a scan with the perfect system optimizer and it did remove a lot of files he said were copies and since then, Information System says that it can collect Information, cannot access windows management instrumentation software. Windows Management files may have been moved or missing. I tried to use the administrative tools in the Management Console Microsoft and add snap - in following the instructions from microsoft on their site, but still did not help. Also tried to restore as soon as possible and the recovery of deleted files from the optimizer software. Nothing has helped so far. I am also on a network with my laptop which runs on Windows 7, but the have not enabled since I stupidly paid 39.99 for this software now appeasrs to have screwed up my computer. Restoration did do 1 restore and I tried 5 times and it said could not files to an earlier time which is an another prolbem I've had for a while with system restore doesn't work does not correctly. If anyone can help me I would really appericiate it. Thank you my friends.

  PKBISHOP

  Hi PKBISHOP,
   
  The error message occurs if the Windows Management Instrumentation (WMI) service is not started. This can happen if the service is disabled, if a dependent service is not started, or if a problem is preventing start the WMI service. The system information utility will be able to collect information that the WMI service is started.
   
  To correct this information to resolve this problem, see the link below.
   
  Msinfo32.exe generates an Error Message "cannot collect information.

• Every 10 minutes, I get a popup window of Microsoft Windows error: Dell Support Center has stopped working

  Every 10 minutes, I get a popup window of Microsoft Windows error: Dell Support Center has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  I uninstalled Dell Support Center via the Control Panel, run the virus and malware scans installed a restore of a month before this problem point and continues.

  Hello

  Dell has their own Forums of Support for you to enquire about Dell software issues.

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• When I try to open the Wacom tablet properties it says "error a supported tablet was not found in this system."

  Tablet not working help please
  OK so I have a tablet that I use to draw for my photoshop... it worked perfectly fine but when I tried after months of non-use, it won't work. and when I try to open the Wacom tablet properties it says "error a supported tablet was not found in this system." I know that it worked because I installed it but now it's just dosnt work... Please help me because I want to draw again.

  Hi LoverofDrawing,

  I suggest you reinstall the drivers for the tablet on the computer by visiting the manufacturer of the Tablet and check if it helps.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Failed to read a video created by Movie maker, photos have an error icon.

  Original title: Movie maker...

  Someone sent me a video with movie maker, but the photos have an error icon, so I can't see it? Ive tried everything...! Im not a computer person...:-/

  Sounds like the file you received is just a. WLMP Project file...
  This would be useful for a re-issue of the purposes and requires
  copies of all the files (Photos, video clips, Audio clips) source...

  Ask the sender to save the project in the. WMV video format
  and send you a copy of this.

  The following video tutorial explains how to save as a movie.

  How to save the project in Windows Live Movie Maker
  http://www.YouTube.com/watch?v=ZyqZm5MBc7o

• ORA-06528: PL/SQL Profiler generator runtime error

  Version 11.2.0.3.  I have installad DBMS_PROFILER:

  SYS AS SYSDBA > @?/rdbms/admin/profload.sql

  SYS AS SYSDBA > @?/rdbms/admin/proftab.sql

  
  

  I tried to use dbms_profiler.start_profiler in PLSQL code with user NUFN and discovered that lacked the NUFN user privileges on the objects of the Profiler. So I ran the following grants:

  grant the update, insert and delete on plsql_profiler_units to NUFN;

  grant the update, insert and delete on plsql_profiler_runs to NUFN;

  Grant execute on DBMS_PROFILER to NUFN;

  But still no luck:

  SQL > START

  dbms_profiler.start_profiler ('test1');

  EXECUTE IMMEDIATE 'select max (STATS_UPDATE_TIME), owner of the DBA_TAB_STATS_HISTORY group from owner to owner.

  dbms_profiler.stop_profiler ();

  END;

  /

  BEGIN

  *

  ERROR on line 1:

  ORA-06528: PL/SQL Profiler generator runtime error

  ORA-06512: at "SYS." DBMS_PROFILER", line 123

  ORA-06512: at "SYS." DBMS_PROFILER", line 132

  ORA-06512: at line 2

  I can't find what is missing from my user NUFN for her to be able to run DBMS_PROFILER.  Help, please!

  Thanks Bella, I had not run @?/rdbms/admin/proftab.sql as my user NUFN but as sys.  But you know what?  Even after execution of @?/rdbms/admin/proftab.sql as NUFN, the problem persisted!

  So I traced my session, read the trace file and found nothing wrong (but I have no experience in finding fault with the workings of dbms_profiler).  But I found the SQL code executed by the dbms_profiler.start_profiler command, which is:

  PARSING IN CURSOR #4574691968 len = 155 dep = 2 uid = 155 oct 2 lid = 155 = tim = hv 530047132716 = ad 3718124591 = "7000000946da848" sqlid = "akx2pxvftw51g."

  INSERT INTO PLSQL_PROFILER_RUNS (RUNID, RUN_DATE, RELATED_RUN, RUN_OWNER) VALUES (PLSQL_PROFILER_RUNNUMBER. NEXTVAL,: B1,: B2, USER) RETURN RUNID IN: O0

  END OF STMT

  ANALYSIS #4574691968:c = 315, e = 844, p = 0, cr = 0, cu = 0, put = 1, r = 0, dep = 2, og = 1, plh = 0, tim = 530047132715

  I tried manually the same HOME, and bingo, I discovered the cause of my problem:

  INSERT INTO PLSQL_PROFILER_RUNS (RUNID, RUN_DATE, RELATED_RUN, RUN_OWNER) VALUES (PLSQL_PROFILER_RUNNUMBER. NEXTVAL, sysdate, 'manually', 'ME');

  ORA-01950: no privileges on tablespace execution times

  After performing ALTER USER NUFN QUOTA UNLIMITED ON STATES; the problem has been resolved.

  Conclusion: after DBMS_PROFILER installation for a user, make sure that the user can write in objects DBMS_PROFILER (SUBSIDIES and QUOTAS).