Need help - ASA 5520 VPN issues

Similar Questions

• ASA 5520 VPN licenses

  Community support,

  I want to run this question by you guys to avoid the sales of our partner CISCO and similar pitch more to the best solution that would give us what we want.

  We currently have a VPN from CISCO 3020 hub to terminate the Lan-to-Lan tunnels and have our mobile workers to connect through the client VPN CISCO (300 users-employees and contractors).

  Given that this device is coming to an end of LIFE this year, we bought a CISCO 5520 (here is the current licenses in this topic)

  Licensing seems quite complicated, so here's my question:

  -What VPN do you recommend for our users and entrepreneurs? I understand that the CISCO VPN client does not work with ASA 5500 Series devices

  Is there a license needed to deploy a VPN solution for our remote users(employees/contractors)?

  Thank you

  John

  The devices allowed for this platform:
  The maximum physical Interfaces: unlimited perpetual
  VLAN maximum: 150 perpetual
  Guests of the Interior: perpetual unlimited
  Failover: Active/active perpetual
  VPN - A: enabled perpetual
  VPN-3DES-AES: activated perpetual
  Security contexts: 2 perpetual
  GTP/GPRS: Disabled perpetual
  AnyConnect Premium peers: 2 perpetual
  AnyConnect Essentials: Disabled perpetual
  Counterparts in other VPNS: 750 perpetual
  Total VPN counterparts: 750 perpetual
  Shared license: disabled perpetual
  AnyConnect for Mobile: disabled perpetual
  AnyConnect Cisco VPN phone: disabled perpetual
  Assessment of Advanced endpoint: disabled perpetual
  Proxy UC phone sessions: 2 perpetual
  Proxy total UC sessions: 2 perpetual
  Botnet traffic filter: disabled perpetual
  Intercompany Media Engine: Disabled perpetual

  This platform includes an ASA 5520 VPN Plus license.

  Your understanding that the Cisco VPN client does not work with ASA is wrong. Maybe it's the version of Cisco VPN client that you use currently does not work with ASA. But these (and so not very new indeed) versions of VPN client work with the ASA. I installed for several clients who use the traditional IPSec VPN client with ASA ASAs and they work well.

  You are right that the granting of licenses for the SAA is complicated. Your tunnels IPSec VPN site-to-site will work on the SAA and pose much challenge in terms of licenses. But there are problems and alternative solutions to consider for remote access VPN clients. At this point, there are two major variants: you can use the classic IPSec VPN client or you can use the new AnyConnect client. From a licensing perspective there is a Hugh difference between them. It is not special license that applies to the traditional IPSec client and they are just against your license for peers Total VPN (for which you have 750 in your license). For the AnyConect there is a condition of licence. There is a premium for AnyConnect license and there are licensed AnyConnect Essentials. The Essentials license price is much lower than the premium license, but Essentials does not all the features that made the premium.

  In the immediate future, that it would sound like an easy question to answer, use the traditional IPSec VPN client for which theere is not a special permit and it is what you are used to. However Cisco has announced the dates of end of sale and end of Support for the traditional VPN client. If at some point you will need to use the AnyConnect client. I would say that if you make the change of the ASA that it might be a good choice to also adopt the AnyConnect client.

  HTH

  Rick

• ASA 5520 - VPN users have no internet.

  Hello

  We just migrated a Pix 515 and an ASA 5520 VPN concentrator.  The firewall part works fine, but we have some problem with our remote VPN.

  Everything inside network is accessible when you use VPN remote but there is no access to our perimeter network or the internet.  I don't know there's only something simple you need that I'm missing, and hoping someone can shed some light on what is needed to allow the VPN tunnel back outdoors and in our DMZ.

  The ASA is running 8.2 (2) 9 and ASDM 6.2 (1).

  See you soon,.

  Rob

  From the 172.16.68.0/24 you can PING 10.10.10.1 correct?

  The 10.10.10.0/24 you can PING 172.16.68.1 correct?

  I'm having a hard time find now how this tunnel is up since you have PFS
  activated on the SAA, but not on the PIX.

  Federico.

• Routing with Cisco ASA 5520 VPN

  I have installed IPsec vpn remote users in the Cisco ASA 5520 using RADIUS in my main network. Works very well. I have a site to my Cisco ASA5520 tunnels going to other sites, some of the tunnels have Cisco ASA and some have SonicWalls. I wish that my users VPN remote IPSec to be able to navigate in these tunnels is a site to access remote subnets attached to these tunnels. Do I need to use a combination of routing and the ACL? Or can I just use ACL only? Or just use routing only?

  Thank you

  Carlos

  Hello

  The key to set up here is the two ACL of VPN L2L end points that determine the 'interesting' traffic to connect VPN L2L. You will also need to confirm that the connection of the VPN Client is configured so that traffic to the remote sites have sent to the connection of the VPN client. There are also other things that you should check on your ASA plant

  Here most of the things you usually have to confirm

  • Set up 'permit same-security-traffic intra-interface' if it is already present in your configuration
    • This setting will allow connections to form between the hosts that are connected to the same interface on the ASA. In this case, applies because the VPN client users are connected to the interface 'outside' of the ASA and also remote sites are connected to the ASA to "external". If the traffic between the remote VPN Client and VPN L2L sites will be to enter and exit the same interface
  • You will need to check how the customer if configured VPN connection. Split or full Tunnel tunnel
    • If the connection of the VPN Client is configured as Split Tunnel then you need to add all the networks from the remote to the Split Tunnel, so that the connections between the VPN Client is transmitted to the ASA and from there connections VPN L2L
    • If the connection of the VPN Client is configured as full Tunnel, then there no problem that all traffic is transferred to the Client VPN connection all its assets
  • Define the VPN pool in the ACL of VPN L2L
    • You should make sure that the pool network VPN Client is defined in the ACL that define 'interesting' traffic to connect VPN L2L. So, you need to add the pool VPN VPN L2L configurations on the sites of Central America and remote control
  • Configure NAT0 / NAT exempt for remote VPN Client to L2L VPN Site traffic at both ends of the VPN L2L
    • You must ensure that the NAT0 / exempt NAT rules exist for the VPN Client for Remote Site traffic. This will have to be configured on the SAA "outside" interface. Format of configuration varies naturally a bit on the ASA Central his software level.

  These should be the most common things to set up and confirm for traffic to flow between the VPN Client and Remote Sites

  Hope this helps please rate if yes or ask more if necessary.

  -Jouni

• VPN site to site & outdoor on ASA 5520 VPN client

  Hi, I'm jonathan rivero.

  I have an ASA 5520 Version 8.0 (2), I configured the site-to-site VPN and works very well, in the other device, I configured the VPN Client for remote users and works very well, but I try to cofigure 2 VPNs on ASA 5520 on the same outside interface and I have the line "outside_map interface card crypto outdoors (for VPN client). , but when I set up the "crypto map VPNL2L outside interface, it replaces the command', and so I can have only a single connection.

  the executed show.

  ASA1 (config) # sh run

  : Saved

  :

  ASA Version 8.0 (2)

  !

  hostname ASA1

  activate 7esAUjZmKQSFDCZX encrypted password

  names of

  !

  interface Ethernet0/0

  nameif inside

  security-level 100

  address 172.16.3.2 IP 255.255.255.0

  !

  interface Ethernet0/1

  nameif outside

  security-level 0

  IP 200.20.20.1 255.255.255.0

  !

  interface Ethernet0/1.1

  VLAN 1

  nameif outside1

  security-level 0

  no ip address

  !

  interface Ethernet0/2

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface Ethernet0/3

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface Ethernet0/4

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface Ethernet0/5

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  2KFQnbNIdI.2KYOU encrypted passwd

  passive FTP mode

  object-group, net-LAN

  object-network 172.16.0.0 255.255.255.0

  object-network 172.16.1.0 255.255.255.0

  object-network 172.16.2.0 255.255.255.0

  object-network 172.16.3.0 255.255.255.0

  object-group, NET / remote

  object-network 172.16.100.0 255.255.255.0

  object-network 172.16.101.0 255.255.255.0

  object-network 172.16.102.0 255.255.255.0

  object-network 172.16.103.0 255.255.255.0

  object-group network net-poolvpn

  object-network 192.168.11.0 255.255.255.0

  access list outside nat extended permit ip net local group object all

  access-list extended sheep allowed ip local object-group net object-group net / remote

  access-list extended sheep allowed ip local object-group net net poolvpn object-group

  access-list splittun-vpngroup1 extended permitted ip local object-group net net poolvpn object-group

  pager lines 24

  Within 1500 MTU

  Outside 1500 MTU

  outside1 MTU 1500

  IP local pool ippool 192.168.11.1 - 192.168.11.100 mask 255.255.255.0

  no failover

  ICMP unreachable rate-limit 100 burst-size 10

  don't allow no asdm history

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0 access-list sheep

  NAT (inside) 1 access list outside nat

  Route outside 0.0.0.0 0.0.0.0 200.20.20.1 1

  Route inside 172.16.0.0 255.255.255.0 172.16.3.2 1

  Route inside 172.16.1.0 255.255.255.0 172.16.3.2 1

  Route inside 172.16.2.0 255.255.255.0 172.16.3.2 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout, uauth 0:05:00 absolute

  dynamic-access-policy-registration DfltAccessPolicy

  the ssh LOCAL console AAA authentication

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  86400 seconds, duration of life crypto ipsec security association

  Crypto ipsec kilobytes of life security-association 400000

  Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA

  card crypto VPNL2L 1 match for sheep

  card crypto VPNL2L 1 set peer 200.30.30.1

  VPNL2L 1 transform-set ESP-3DES-MD5 crypto card game

  map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map

  outside_map interface card crypto outside

  crypto isakmp identity address

  crypto ISAKMP allow outside

  crypto ISAKMP policy 20

  preshared authentication

  3des encryption

  md5 hash

  Group 2

  life 86400

  crypto ISAKMP policy 30

  preshared authentication

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 65535

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  a basic threat threat detection

  Statistics-list of access threat detection

  !

  !

  internal vpngroup1 group policy

  attributes of the strategy of group vpngroup1

  banner value +++ welcome to Cisco Systems 7.0. +++

  value of 192.168.0.1 DNS server 192.168.1.1

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list value splittun-vpngroup1

  value by default-ad domain - domain.local

  Split-dns value ad - domain.local

  the address value ippool pools

  username password asa1 VRTlLlJ48/PoDKjS encrypted privilege 15

  tunnel-group 200.30.30.1 type ipsec-l2l

  IPSec-attributes tunnel-group 200.30.30.1

  pre-shared-key *.

  type tunnel-group vpngroup1 remote access

  tunnel-group vpngroup1 General-attributes

  ippool address pool

  Group Policy - by default-vpngroup1

  vpngroup1 group of tunnel ipsec-attributes

  pre-shared-key *.

  context of prompt hostname

  Cryptochecksum:00000000000000000000000000000000

  : end

  ASA2 (config) #sh run

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  86400 seconds, duration of life crypto ipsec security association
  Crypto ipsec kilobytes of life security-association 400000
  card crypto VPNL2L 1 match for sheep
  card crypto VPNL2L 1 set peer 200.30.30.1
  VPNL2L 1 transform-set ESP-3DES-MD5 crypto card game
  VPNL2L interface card crypto outside
  crypto isakmp identity address
  crypto ISAKMP allow outside
  crypto ISAKMP policy 20
  preshared authentication
  3des encryption
  md5 hash
  Group 2
  life 86400

  tunnel-group 200.30.30.1 type ipsec-l2l
  IPSec-attributes tunnel-group 200.30.30.1
  pre-shared key cisco

  my topology:

  

  I try with the following links, but did not work

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080912cfd.shtml

  http://www.Cisco.com/en/us/products/ps6120/products_tech_note09186a00807e0aca.shtml

  Best regards...

  "" I thing both the force of the SAA with the new road outside, why is that? ".

  without the road ASA pushes traffic inward, by default.

  In any case, this must have been a learning experience.

  Hopefully, this has been no help.

  Please rate, all the helful post.

  Thank you

  Rizwan Muhammed.

• ASA 5520 - VPN using LDAP access control

  I'm setting up an ASA 5520 for VPN access.  Authorization & authentication using an LDAP server.  I have successfully configured tunnel, and I can access internal resources.  What I want to do now is to limit access to a specific ad group membership.  In the absence of this belonging to a group, a user cannot access the VPN.

  My VPN client software testing is Cisco Systems VPN Client 5.0.05.0290 Version.  The Group authentication is configured in a connection entry that identifies the Group of Tunnel. I think I wrote that correctly.

  The Version of the software on the SAA is 8.3 (1).

  My current challenge is getting the VPN to stop letting each request for access through little matter belonging to a group.  I found the thread below to be significantly useful, but there is obviously something which is not entirely mesh with my situation.

  https://supportforums.Cisco.com/message/3232649#3232649

  Thanking all in advance for everything offered thoughts and advice.

  Configuration (AAA LDAP, group policy and group of tunnel) is below.

  AAA-Server LDAP protocol ldap
  AAA-Server LDAP (inside) host x.x.y.12
  Server-port 636
  LDAP-base-dn dc = domain, dc = com
  LDAP-scope subtree
  LDAP-naming-attribute sAMAccountName
  LDAP-login-password *.
  LDAP-connection-dn cn = svcacct, or = svcac, or = users, or = svcad, dc = domain, dc = com
  enable LDAP over ssl
  microsoft server type
  LDAP-attribute-map LDAP_MAP
  AAA-Server LDAP (inside) host x.x.y.10
  Server-port 636
  LDAP-base-dn dc = domain, dc = com
  LDAP-scope subtree
  LDAP-naming-attribute sAMAccountName
  LDAP-login-password *.
  LDAP-connection-dn cn = svcacct, or = svcac, or = users, or = svcad, dc = domain, dc = com
  enable LDAP over ssl
  LDAP-attribute-map LDAP_MAP
  AAA-Server LDAP (inside) host x.x.y.11
  Server-port 636
  LDAP-base-dn dc = domain, dc = com
  LDAP-scope subtree
  LDAP-naming-attribute sAMAccountName
  LDAP-login-password *.
  LDAP-connection-dn cn = svcacct, or = svcac, or = users, or = svcad, dc = domain, dc = com
  enable LDAP over ssl
  microsoft server type
  LDAP-attribute-map LDAP_MAP

  AAA-Server LDAP (inside) host x.x.y.10
  Server-port 636
  LDAP-base-dn dc = domain, dc = com
  LDAP-scope subtree
  LDAP-naming-attribute sAMAccountName
  LDAP-login-password *.
  LDAP-connection-dn cn = svcacct, or = svcac, or = users, or = svcad, dc = domain, dc = com
  enable LDAP over ssl
  LDAP-attribute-map LDAP_MAP
  AAA-Server LDAP (inside) host x.x.y.11
  Server-port 636
  LDAP-base-dn dc = domain, dc = com
  LDAP-scope subtree
  LDAP-naming-attribute sAMAccountName
  LDAP-login-password *.
  LDAP-connection-dn cn = svcacct, or = svcac, or = users, or = svcad, dc = domain, dc = com
  enable LDAP over ssl
  microsoft server type
  LDAP-attribute-map LDAP_MAP
  !
  internal group NOACCESS strategy
  NOACCESS group policy attributes
  VPN - concurrent connections 0
  Protocol-tunnel-VPN IPSec webvpn
  address pools no
  attributes of Group Policy DfltGrpPolicy
  VPN - 10 concurrent connections
  Protocol-tunnel-VPN IPSec webvpn
  enable IPSec-udp
  vpn group policy - pro internal
  vpn - pro group policy attributes
  value x.x.y.17 x.x.y.27 WINS server
  Server DNS value x.x.y.19 x.x.y.29
  VPN - 50 simultaneous connections
  Protocol-tunnel-VPN IPSec svc
  group-lock value vpn - pro
  field default value domain.com
  value of address ip-vpn-pro pools
  WebVPN
  client of dpd-interval SVC no
  dpd-interval SVC 1800 bridge
  !

  attributes global-tunnel-group DefaultRAGroup
  LDAP authentication group-server
  LDAP authorization-server-group
  Group Policy - by default-vpn-pro
  authorization required
  type group tunnel vpn - pro remote access
  attributes global-tunnel-group-vpn - pro
  LDAP authentication group-server
  Group-server-authentication (LDAP outside)
  LDAP authorization-server-group
  Group Policy - by default-vpn-pro
  band-Kingdom
  password-management
  band-band
  authorization required
  type tunnel-group NOACCESSGROUP remote access
  attributes global-tunnel-group NOACCESSGROUP
  LDAP authentication group-server
  NOACCESS by default-group-policy

  Hello

  The configuration of what you are looking for is a feature called DAP (Dynamic Access Policy)

  The following link will explain how to set up the same.

  http://www.ciscosystems.com/en/us/products/ps6120/products_white_paper09186a00809fcf38.shtml

  I hope this helps.

  Kind regards

  Anisha

  P.S.: Please mark this thread as answered if you feel that your query is resolved. Note the useful messages.

• How to change address on ASA 5520 VPN peer

  Environment:

  7.2 (1) running ASA 5520

  IPSEC VPN L2L established by using wizard.

  Change the IP address of the remote peer. Using ASDM, I can't change the name of the Tunnel Group (which is currently the address peer). I may change the address peer in the IPSec rule, but is that all that is necessary?

  I have to add a new group of tunnel using the new address of peers for the name? If yes how it is related to other objects that are required for a VPN?

  When you create a VPN using the wizard, it creates several objects that are difficult to track when changes are required. Is it better to remove all current VPN objects and create a new configuration using the wizard again?

  Is it's better to make the changes using the CLI? What lines must be changed for peer address when using the commands?

  Thanks in advance for any help!

  I may change the address peer in the IPSec rule, but is that all that is necessary?

  -No, tunnel group name must match the peer address.

  I have to add a new group of tunnel using the new address of peers for the name?

  -Yes.

  Is it's better to make the changes using the CLI?

  -I recommend it, but if you don't know you have no choice.

  Add new tunnel-group with group as new name address peer, same key etc. Add a new address peer settings under rule edit ipsec peer. Then you should be able to remove the old tunnel group. Hope this helps you, been a while since I made this way.

• Need help with Config VPN on ASA5505

  Our client has a seller who needs to establish a VPN tunnel to their own router that sits behind our firewall.

  Concentrator VPN (seller) ASA5505 customer (7.2) <------> <------->3750 Switch <------->VPN router (Vendor)

  Here is the implementation of information:

  ASA outside Interface - 208.64.1x.x4 DG - 208.64.1x.x3

  ASA inside the Interface - 172.20.58.13/30

  3750 switch Interface connected to ASA - DG - 172.20.58.13 and 172.20.58.14/30

  3750 switch Interface connected to router VPN - 172.20.58.21

  The Interface of the VPN router connected to the 3750 - 172.20.58.22/30 DG - 172.20.58.21

  I have also attached a Visio for that and the current configuration of execution of ASA and 3750. We have no access to the router VPN TNS.

  Our responsibility is to everything just to make sure that the tunnel rises.

  You kindly help me with this?

  Here is what I intend to do:

  (1) create a static NAT on the ASA Public Private IP Address of the VPN router

  Public - 208.64.1x.x5 / 28

  Private - 172.20.58.21 / 30

  Will be the ASA automatically ARP for this address or do we I have to configure another interface on the ASA with this public IP address?

  (2) what would the access on the ASA list?

  (3) the customer gave us some config to copy the stuff on the SAA so that they can create the tunnel but I couldn't put these commands in the SAA. How this would apply and which interface?

  Access to firewall: the information below is about access between the VPN router and the

  VPN concentrator. If a firewall/router is present in front of the VPN services must be

  permit:

  allow a host 208.224.x.x esp

  allow a host 208.224.x.x gre

  permit any isakmp udp host 208.224.x.x eq

  permit any eq non500-isakmp udp host 208.224.x.x

  allow a host 204.8.x.x esp

  allow a host 204.8.x.x gre

  permit any isakmp udp host 204.8.x.x eq

  permit any eq non500-isakmp udp host 204.8.x.x

  permit tcp 206.x.x.0 0.0.0.255 any eq 22

  permit tcp 206.x.x.0 0.0.0.255 any eq telnet

  allow a udp host 208.224.x.x

  allow a udp host 208.224.x.x

  Can someone help me with the commands I need to run it on the ASA? The 5505 running 7.2 code (4).

  Thanks in advance.

  HS

  Your steps are correct, you need to configure static NAT and the list of access to allow access.

  Static NAT would be as follows:

  static (inside, outside) 208.64.1x.x5 172.20.58.21 netmask 255.255.255.255

  You also need a road inside interface-oriented join 172.20.58.21:

  Route inside 172.20.58.21 255.255.255.255 172.20.58.14

  You have already access list on the external interface? If you have, then just add in the existing access list, if you don't have it, and then add the following:

  access list outside-acl permit udp any host 208.64.1x.x5 eq 500

  access list outside-acl permit udp any host 208.64.1x.x5 eq 4500

  access list outside-acl allow esp any host 208.64.1x.x5

  Access-group acl outside in external interface

  If you also have an inside interface access list, you must also allow passing traffic by as follows:

  access-list allow host 172.20.58.21 udp any eq 500

  access-list allow host 172.20.58.21 udp any eq 4500

  access-list allow host esp 172.20.58.21 all

  If you have not had any access inside the interface list, then you don't need to configure it.

  Hope that helps.

• How many group Supportepar ASA 5520 vpn for remote access

  Hello

  Howmany vpn group is supported on asa 5520 with configuraion vpn remote access.

  Concerning

  1 if nat-control is disabled and you do not have any other order NAT in your config file, you do not have it. Try to remove the existing "NAT 0" command and "clear xlate."

  2. you must ensure that your network inside know they can go by ASA to access remote vpn client IP. You have any device layer 3 behind the ASA that does the routing. If so, please verify that this is the routing table.

• 1841. ASA 5520 VPN

  I set up a VPN site-to site between a Cisco ISR 1841 and a Cisco ASA 5520, everything seems to work but I have a few questions.

  1. I must explicitly authorize all VPN traffic in the ACL on the external interface of the 1841, y at - it an equivalent of router "vpn sysopt connection permit?

  2. Although the VPN rises and pass traffic, I have the opportunity to see what follows?

  * 14:11:52.883 22 June: % CRYPTO-6-IKMP_MODE_FAILURE: fast processing mode has failed with the peer 1.1.1.1

  You can share the outputs full? Both sides at the same time?

  Bottom line, I don't think it's normal in IOS 12.4 mainline unless packages are leaking clear ;/

• Need help to configure VPN NAT traffic to ip address external pool ASA

  Hello

  I need to configure vpn NAT ip address traffic external pool ASA

  For example.

  Apart from the ip address is 1.1.1.10

  VPN traffic must be nat to 1.1.1.11

  If I try to configure policy nat or static nat ASA gives me error "global address of overlap with mask.

  Please, help me to solve this problem.

  Thank you best regards &,.

  Ramanantsoa

  Thank you, and since you are just 1 IP 1.1.1.11 Polo, the traffic can only be initiated from your site to the remote end.

  Here is the configuration of NAT:

  access list nat - vpn ip 192.168.1.0 allow 255.255.255.0 10.0.0.0 255.255.0.0

  NAT (inside) 5 access list nat - vpn

  Overall 5 1.1.1.11 (outside)

  In addition, the ACL crypto for the tunnel from site to site should be as follows:

  access-list allow 1.1.1.11 ip host 10.0.0.0 255.255.0.0

  Hope that helps.

• ASA 5520 VPN

  Hello

  Ask for help if it is possible to have both SSL & ipsec site to site vpn configured on a 5520. If so, would there be no degradation of performance or any limitation of no.. users are allowed.

  Any other things I need to know in this respect.

  Appreciate your help,

  Thank you.

  Yes, you can have the SSL VPN, IPSec Site to site, but also remote access IPSec VPN configured and running simultaneously.

  Here's what ASA5520 can support:

  -IPSec 750 (Inc. VPN Site-to-Site and remote access)

  -750 SSL VPN

  http://www.Cisco.com/en/us/products/ps6120/prod_models_comparison.html

  Please note that for SSL VPN, it only comes with license 2 by default, and you must purchase the SSL license if you want to run more than 2 SSL VPN sessions simultaneously.

  Hope that helps.

• Need help with ikev1 VPN site-to-site

  Hi guys,.

  I have 2 asa 5505, the two 8.4 (4) running with ASDM 6.4 (9).

  I rebuild the config probalby 6 times now, with no clue what I am doing wrong.

  My main gig is, why the asa are not same initiator VPN negiotiation, no traffic at all.

  OK, I can ping both devices on their external interfaces.

  IKEv1 is enabled on the external interfaces.

  I checked the connection profile, group of tunnel, cryptographic cards, IKE strategies, etc.

  Always nothing less newspapers, which would indicate any attempt of negotiation.

  Help, please!

  Hello

  Well, that really depends on your configuration. For the most amount of networking to each site using the VPN L2L.

  But generally you can configure with

  object-group, LAN

  network-object

  object-group, REMOTE network

  network-object

  Destination LOCAL LOCAL Shared source (indoor, outdoor) NAT static REMOTE

  Naturally, the names of "object-group" can be different and your interfaces cannot be named 'inside' and 'outside'

  -Jouni

• Need help on ASA5505 VPN configuration

  Hello

  For the life of me I can't get this to work. I know it is something simple, yet I've not thought about it.

  My father-n-law lives in China and they block a lot of sites in the United States. I have my set VPN in place in the United States for remote access, but to get there from China it still cannot connect to the United States sites. Can someone help me if I can get this working properly?

  Thanks in advance!

  EricO

  Great, thank you.

  Here's what you need to add:

  permit same-security-traffic intra-interface

  China-VPN network object

  255.255.255.0 subnet 192.168.100.0

  dynamic NAT interface (outdoors, outdoor)

  group attributes political kikou

  Split-tunnel-policy tunnelall

  no value in split-tunnel-network-list KaileY_splitTunnelAcl

• Need help for IPSEC VPN configuration.

  Hello

  I'm trying to implement a VPN IPSEC connection in my GNS3 lab and all show commands and debugs does not seem to give me clues of what is wrong or missing... can someone please help me in my troubleshooting VPN config. Here is the config for Router 1

  R1 #sh run

  crypto ISAKMP policy 1

  preshared authentication

  Group 2

  ISAKMP crypto key 6 cisco123 address 200.20.1.1

  !

  !

  Crypto ipsec transform-set esp - esp-sha-hmac CISCO_SET

  !

  map VPN_map 10 ipsec-isakmp crypto

  ! Incomplete

  defined by peer 200.20.1.1

  Set security-association second life 190

  game of transformation-CISCO_SET

  match address INT_TRAFFIC

  !

  !

  interface Loopback1

  IP 172.16.1.1 255.255.255.255

  !

  interface Loopback2

  172.16.1.2 IP address 255.255.255.255

  !

  interface FastEthernet0/0

  IP 200.11.1.1 255.255.255.252

  IP ospf 1 zone 0

  automatic duplex

  automatic speed

  card crypto VPN_map

  !

  router ospf 1

  Log-adjacency-changes

  network 172.16.0.0 0.0.255.255 area 0

  !

  router bgp 65001

  no synchronization

  The log-neighbor BGP-changes

  200.11.1.0 netmask 255.255.255.252

  neighbour 200.11.1.2 distance - as 65030

  No Auto-resume

  !

  IP forward-Protocol ND

  !

  !

  IP http server

  no ip http secure server

  !

  INT_TRAFFFIC extended IP access list

  IP address 172.16.0.0 allow 0.0.255.255 192.168.0.0 0.0.255.255

  IP address 172.16.0.0 allow 0.0.255.255 192.168.0.0 0.0.255.255 connect

  end

  R1 #sh crypto isakmp his

  IPv4 Crypto ISAKMP Security Association

  status of DST CBC State conn-id slot

  IPv6 Crypto ISAKMP Security Association

  R1 ipsec crypto #show her

  Nill...

  R1 #sh debugging

  Encryption subsystem:

  Crypto ISAKMP debug is on

  Engine debug crypto is on

  Crypto IPSEC debugging is on

  Regulation:

  memory tracking is enabled

  R1 #sh ip route

  Gateway of last resort is not set

  200.20.1.0/30 is divided into subnets, subnets 1

  B 200.20.1.0 [20/0] via 200.11.1.2, 01:28:21

  200.11.1.0/30 is divided into subnets, subnets 1

  C 200.11.1.0 is directly connected, FastEthernet0/0

  172.16.0.0/32 is divided into subnets, 2 subnets

  C 172.16.1.1 is directly connected, Loopback1

  C 172.16.1.2 is directly connected, Loopback2

  R1 #ping 200.20.1.1

  Type to abort escape sequence.

  Send 5, echoes ICMP 100 bytes to 200.20.1.1, wait time is 2 seconds:

  !!!!!

  See you soon,.

  Fabio

  Nice Catch. The key word 'Incomplete!' should have reported it.

  Please close the issue as resolved - user error

  Thank you
  Brian