Theme of WFS requires authentication, how pass/configure credentials?

Similar Questions

• How to configure the settings of mail on HP Laserjet Enterprise 500 color MFP M575 printer/scanner?

  How to configure the settings of mail on HP Laserjet Enterprise 500 color MFP M575 printer/scanner?  The Office has 5 staff members each with ending with [email protected] for example e-mail addresses.  We have also created an email for option analysis as [email protected] (not sure if creating an e-mail address for the scan option is required).  We are not part of any domain, and there is no server in the office.  When you try to configure the email on the printer/scanner control panel it asks the host name.

  What host name that I can use?

  If you try to configure the browser by using the IP address of the printer, he asks as the SMTP server. The MS Outlook 2010 all our emails use mail.junior - albania.org incoming mail server and outgoing.  Other settings in MS Outlook 2010 are box My outgoing server (SMTP) requires authentication checked and use the same settings as my mail server entering selected.  On the Advanced tab: incoming server (Pop3): 110 (SSL encryption is not checked) and outgoing (SMTP) server: 465 use the type of encrypted connection (SSL) following.

  What server SMTP should I use in this case?

  I would appreciate your help in the configuration of the HP printer/Scanner for scanning and sending by electronic mail to the members of the office staff email addresses.

  Thank you...

  I'll link you to the product page with several documents which I hope will help you to configure your e-mail settings. Please look through them and see which ones fit your needs:

  Scan and send (e-mail, send to folder, digital sending, etc..)

  Here is another site that has some videos that will guide you through the entire upward (here I would try everything first )

  Simulations of MFP - digital send

  If these don't work, please let me know and I will continue to search it for you.

• How to configure an e-mail account pop on ipad

  I'm brand new on ipad (3 days).

  I have 4 accounts pop e-mail set up at Cox.net and want to use the e-mail application to send and receive.  How to do this.  It seems that I should set the port numbers, but cannot find a way to do it.

  You will appreciate help on this.

  Thank you

  More info on the problem.  Cox pop server doesn't require authentication and Outlook in Office 365 provides a way to tell the configuration which.  I find no way in the mail application to select 'no authentication '.   Could be the problem.

• my windows pc very experience 1, I am embarressed to admit that I can not understand how to configure the windows/outlook e-mail system. This pop and smtp or what ever Q was, I still can't understand.

  I'm unable to set up Outlook, or now called windows mail, I think. but for the life of me I do not understand how to configure the e-mail program that comes with now it windows Vista 64 that came on my new pc.  can someone please?  Thank you

  Windows Mail is/was not Outlook.

  Windows XP e-mail program called Outlook Express.

  Outlook is a part of the office.

  Windows Mail in Vista is the replacement of e-mail for Outlook Express (XP) program.

  Read this section on how to set up Windows Mail in Vista:

  http://www.SimpleHelp.NET/2007/02/07/a-beginners-guide-to-setting-up-Windows-Mail/

  Link above has an easy to follow Guide to set up Windows Mail.

  Contact your ISP (Internet Service Provider).

  They offer your broad band/Dial-up connection.

  Ask them to:

  username
  password for your service account to wide band/Dial-Up with them

  Server of incoming POP3 mail
  outgoing mail SMTP server

  The above information is required to set up Windows Mail.

  ISPS are usually happy to help you set up your email account.

  See you soon.

  Mick Murphy - Microsoft partner

• How to configure the port to connect the SG300 switch to 3com switch

  Hello

  I need help. I have my network with multiple switches SG300.

  I have one of them as my base switch working mode layer 3. With 2 VLANS and vlan interfaces to each vlan.

  Everything works ok.

  But now I need to plug a 3com unmanage switch who welcomed of vlan 1 and 2. How can I connect this switch to my Cisco sg300 switch? Which mode to use in this port?

  Thank you very much.

  SG300 Switch L3

  I have

  I have

  SG300 L2 switch

  I have

  I have<-------- how="" should="" i="" configure="" this="" connection="" to="" support="" all="">

  I have

  3Com unmanage switch

  I          I

  I          I

  I have vlan 1

  VLAN2

  Use of VLAN based on MAC on SG300 L2 switch, record all customers on the required VLANs (or better configure port SG300 L2 to 3com in VLAN PVID with maximum and other clients in the VLAN based on MAC).

• How to configure a multihomed in Windows 7, wired network and wireless networks at the same time?

  Hello

  I have a fixed computer Windows 7, I need to configure for the use of wire and wireless networks.

  On the phone we transfer vast amounts of data, astronomy cameras than only products of 20 to 30 seconds, space images 3-4 GB each. The cameras are connected to the top of a tower, which in turn is connected via a 45 feet cable CAT-5 to the search engine.

  Internet access requires a wireless network connection.

  These two connections work - separately. I have to disable an and activate the other to pass. This jump back and foth is obviously a bit inconvenient.

  How to configure Windows 7 to manage both types of networks at the same time? On another forum I learned this kind of configuration is called multihoming, and it's something difficult to achieve.

  Having studied more about it, there is another possible solution called Internet connection sharing. that may be easier. I haven't used this option for years (since the routers were introduced) but is still active.

  Disable DHCP on the Dovado or use a cable between the PC and the laptop.

  Turn on the wireless on the PC and make sure that you have an internet connection. Disable wireless on the laptop. Connect the PC's LAN ports and laptop (via router or a cable crossover).

  IN the network of PCs and next to the connections Sharing Center, you must have 2 Ethernet and WiFi options. Double click on WiFi, then on the next screen, click Properties.

  The second tab in the next screen is sharing, check allow other users of the network to connect and then OK.

  Define the IP addresses for PC and laptop as in my previous post, but this time on the laptop set the default gateway to the IP address of the Wired of the PC port, the 1st DNS to the address of the Huawei and value of secondary school who suggested for your ISP.

  This affects your PC to access wireless internet and allows the laptop to access the internet via the PC

  Basic information about ICS are HERE

  Manuals for the Dovado HERE

• How to configure the ApprovalTask.task

  Hello

  I need to create a SOA workflow in IOM and we have three different scenarios that are addressed in the workflow for the same resource object of IOM.

  (1) some users need only approved nursery

  (2) some users need only hold Administaror Group approval

  (3) some users need two groups and Resouce Administrotor approval.

  Since the code Java Jave Embeeded task, I can decide what type of approval required (plus three) but

  I am not able to understand how to configure this in Apporval.task in SOA so that it does approve by so . Can someone help me please.

  Thank you

  Raj.

  Write your code with all your scenarios so that at the end of the day, you have identified the values for each possible approver.  If it is not required, set the value to "false" or another value and pass in your payload.  In your approval task, create an assignment for each.  In the lower part of each assignment, there is an entry that allows you to set a value ignore then use the value of the payload = 'false' comparison for this assignment.  Then it will pop all the other approval of task assignments from your list of approval tasks.  This will allow you to always have a task of single approval for all combinations.

  -Kevin

• How to configure HP ENVY 700 - 210xt to install the graphics card EVGA 650 TI boost.

  Can someone tell me how to install the graphics card EVGA 650 TI boost in the

  HP ENVY 700-210xt

  Product number: E9G99AV

  I replaced the power supply with Corsair RM 650 watt power supply that works very well. Now, I want to go to the graphics card EVGA 650 TI boost. Except, I can't get the driver to load with period of installed equipment. When I put the card into the PCI 16 x slot the computer starts with a blank screen. I pass the DVI video port old computer and the new port card white screen of same at startup. If I turn the PCIe port disabled in BIOS, it starts with the embedded video, but same thing impossible to load drivers that are not able to locate the new video card hardware. Makes me crazy! I don't know that I don't know how to configure the Bios correctly or something. Can anyone help?

  Hello:

  Please see my response to your other post on the link below.

  http://h30434.www3.HP.com/T5/desktop-hardware/how-to-configure-to-install-EVGA-650-TI-boost-video-car-in/m-p/3117171#M71438

• How to configure two relationship of controller (same subnet) area of restraint

  I have two domain controller for the forest of deference (windows 2008 r2 (64-bit) serer how can allows users in one domain to be authenticated by a domain controller in the other domain access resources (Eg: A1 domain can access resources in domain A2 using user name and password of user A1 domain controller account) how can configure the settings of this.)

  Hello

  It is not a Community Forum for this question.

  You should ask in the TechNet forums

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  no doubt the general Forum.

  Don

• How to configure the router Linksys DD - WRT for WVC54GCA E4200

  I don't know how to configure the router Linksys DD - WRT for WVC54GCA E4200. DD - WRT is very complcated. Help, please! Also, I used the TZO.com to the DDNS. Can I set up the DDNS for DD - WRT router? I used the DDNS to my old model router before. Thank you.

  I followed the TZO supporter last night. I can watch my WVC54GCA outside. All solution links:

  http://tzodns.com/support/tutorials/188

  http://tzodns.com/support/tutorials/190

  Hi Majekho,

  Your domain name has decided to 99.245.xx.x. If you go to www.test.tzo.com from the location of the host, you must see this IP address. If these numbers are the same, then all with TZO works correctly. I guess that it is a simple problem with ports (80, 1024) is not open in the router and forwarded to the right internal IP address of the device (for example. 192.168.1.xxx).

  In addition, if you have a DSL, you will need to call your ISP and ask them to show you how to put your modem in "bridge mode". This will disable the firewall in the modem that blocks incoming connections even if you open ports in your router.
  In addition, during the test, it is best to test on your device remotely, this is due to a common problem called loopback with most routers. For more information about looping, take a look at:

  http://helpdesk.TZO.com/cgi-bin/KB.cgi?view=140

• How to configure the different VLANs (using the E3200)?

  Hello.

  I want to implement different VLANs (using the E3200) so that I can have two different networks that cannot access each other.

  The E3200 is connected to a modem for internet access.

  I would like that the two networks to access the internet.

  The only E3200 does support the creation of VLANs?

  If not, is there another way I can satisfy the requirement by using the single E3200 (using something else than VLANs)?

  At the end of the day, I think that I would need at least another router.

  Thus, for example,.

  Router a (E3200) is connected to the configuration / modem to DHCP with a rank 192.168.1.1/24 LAN IP address.

  Router B is connected to the router and Setup for DHCP by using a LAN IP range 192.168.2.1/24.

  This peripheral way connected to the router A should not have access to devices connected to router B and vice versa, correct?  For example, X device connected to the router cannot ping or browse files on the device is connected to router B and vice versa, correct?

  Do I need to configure anything else on router B?  For example, do I need the DNS configuration settings so that devices connected to router B can connect to the internet without problem?  Do I need to specify that these VLANs are not bridged and which router, or both?

  I already know how to configure a static IP address, DHCP, beaches LAN IP and static DNS settings on a router, etc.

  With respect to wireless devices, I think that they would follow the same model; for devices connected to the router wireless (E3200) have access to other devices Wi-wired and connected to the router, but not to devices with or without wire, connected to router B and vice versa.  However, if the wireless devices have currently access to wired devices was also connected to the router, so it's good for now.

  Thank you very much!

  -Rami

  The E3200 has no support VLAN according to the manual. There is no way to configure two separate networks with this single router.

  You need to add network electronics.

  Ex:

  Managed with VLAN switch

  Another wireless router with VLAN

  If your modem provides several public or private IP addresses, then you could put a switch after the modem and two wireless routers that are attached to the switch.

• How to configure Windows Live Mail on my laptop?

  I have a windows messaging account - * address email is removed from the privacy *. How to configure it on my 'Windows Mail' on my laptop with Windows Vista? That is to say; IMAPI vs incoming/outgoing POP3 servers?

  When I try to use the "Windows Mail" in my Windows Vista Start menu, it asks a mail server address incoming POP3 or IMAP and mail server address outgoing SMTP.

  What do these?
  How can I find them?
  What should I enter in the fields so I can link my mailbox to the 'Windows Mail' icon in the Start Menu?
  Please, I beg you. Help out me here. I don't know such things.
  Thank you!
  E-mail address is removed from the privacy * or solace667 @ gmail.com

  When I try to use the "Windows Mail" in my Windows Vista Start menu, it asks a mail server address incoming POP3 or IMAP and mail server address outgoing SMTP.

  What do these?

  How can I find them?

  What should I enter in the fields so I can link my mailbox to the 'Windows Mail' icon in the Start Menu?

  It is not a good idea to post the addresses of e-mail of the link of the data for personal identification in public forums like this.

  If you have an e-mail address (what you do since you posted here - it's your Windows Live ID - and it is your gmail address), contact your e-mail provider or visit their web site.  They will have instructions for setting up Windows Mail to access your mailbox on their server.  For example, here are the instructions for your gmail account: http://mail.google.com/support/bin/answer.py?answer=86383

• How to configure a valid account to windows mail, I also need to establish a connection to make it work with windows 9?

  I want to send an email from the site when I have questions for them even if I'm not setup with a valid account, nor do I have a connection.  My computer runs with broadband. 9 Windows?

  Hello

  You must configure your windows mail with your isp e-mail account, internet service provider for your service to wide band/dialup

  They provide you with account settings you need to do

  Ask them to

  username
  password for your access broadband account / distance with them

  Server of incoming POP3 mail
  outgoing mail SMTP server

  and here's how to configure windows mail after getting the email correct account settings

  http://www.vista4beginners.com/Windows-Mail

• How to configure my Windows Mail account?

  I try to put my account but I can' t tried to use step by step, but it does not always send me an email.

  Hello

  In addition to what davidhk129 suggested, also check this setting: Tools/accounts, click your e-mail account and then click Properties. On the Server tab, you must check the box that requires authentication. It is a step that is often forgotten in the configuration of pop e-mail accounts.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• How to configure Cisco Telepresence SX 20

  SX20.PNG

  

  Looking for this topology please help me how I can configure SX 20.

  If you do a search in these forums for autonomous SX20, you'll see a lot of messages that describe how to configure a SX20 and required firewall ports.

  A good example is this: autonomous SX20

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.