Update of security for KB973768 XP does not install and keep asking the instillation

Similar Questions

• Update of security for Vista KB2481109 does not install (daily since March 10) - what can I do?

  All other updates seem to work (sometimes on the second attempt).

  Hi BangorXH,

  1. don't receive you messages or error codes?

  Method 1:

  You can read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2:

  You can try to install the update manually and check.

  See the link to download the updates manually:

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=E3EA7690-386B-4CDF-889F-B3914921C56F&displaylang=en

  You can also read the following article and check if this helps solve the problem.

  http://support.Microsoft.com/kb/822798/

  Hope this information is useful.

• Updates to security for Office 2007 will not install

  OK - I have WIndows 7 Home 64 bit, installed office 2007 and the seucutiy updates will not be installed.  I use AVG antiv virus as well as the windows firewall.  I tried to install updates of security with both of them is off, does not.
  Runs an e8400 intell with 4 GB of ram and 3 hardrives this memory and processing speed are not the issue - of ideas?

  Hi Tagos40,

  Welcome to the Microsoft Answers site!

  Update you are trying to install?

  You get no matter what error code or message when you try to install the update?

  You will need to maybe reset the Windows Update components, download the Microsoft fix - it from the link and run the wizard that automatically resets the windows update components, if it does not, I recommend that reset you manually update windows components from the link: http://support.microsoft.com/kb/971058

  This should solve the problem, after the execution of the audit of the tool if you are able to perform updates.

  If the problem persists try to install the update manually after you download it from the Microsoft site. You can use your favorite search engine and search for the article using the number of the update and download it and install it later.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• new updated flash player installation does not install and cannot uninstall the old version

  been trying to install the most recent update of the adobe reader, but it will not be installed at gets all the up to 7% then gpes far so I tried to uninstall, but it will not uninstall need help! I use google chrome on my macbook pro

  Google Chrome (even on a Mac) has its own exclusive construction of Flash Player ("PepperFlash"). It was modified by Google, incorporated by Google and maintained by Google. Adobe is working with Google for updates and patches, but it is "their baby" once it happens in the browser. It cannot be updated through this site. It updates ONLY by updating Chrome.

  There are instructions to perform a "clean installation" (How to perform a "clean installation" of Flash Player in Mac OS X) but that doesn't apply to the Flash Player for Safari and Firefox plugin.

  You can try this:

  Go to: [username] / Library/Application Support/Google/Chrome ([username] / library is accessible by pressing the "Option" when you click on 'Go' in the Finder menu)

  Inside the Chrome folder is a folder named "PepperFlash".

  Trash and empty the trash.

  Restart Chrome.

  He must rebuild the file system plugins. Otherwise, update of Chrome and it will be.

• Windows 7 activation option does not exist and keeps asking for Windows genuine advantage

  Hi, my computer (Acer) is preinstalled. After a blue error screen all I could do is a total reinstall using the windows system installation from a hidden partition recovery

  Since I did this he keeps complaining about my windows is not not authentic. Also at the start, it tries to install a service pack, defective, then deletes again.
  When we look through the internet I saw several options. When I try to activate manually via computer > properties I get this:
  Activating Windows
  Status not available
  ProductID: Not available
  
  
  If the option activate this way is not available for me.
  When I search I find a program called activate windows, but from this software gives me the following error:
  Code:
  0xC0020012
  Description:
  The interface is unknown.
  
  
  When I try to run SLUI.exe I get the same error as above (0xC0020012
  If after trying that I post this question here what can I do?
  ! Below is my MGADT report:
  NB: What I find weird is that the sticker on my machine displays a different product key that I see in the third line of this report of diagnoses)
  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation code: 0x8004FE21
  Validation caching Code online: n/a, hr = 0xc0000022
  Windows product key: *-* - WJ2H8 - R6B6D-7QJB7
  The Windows Product Key hash: ckKNc + BBPDWmo1LUlOkraNjlQ34 =
  Windows product ID: 00359-OEM-8992687-00006
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7600.2.00010300.0.0.003
  ID: {12DC2847-4260-4A6B-A9BA-335DBF9AF590} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7600.win7_gdr.130318 - 1532
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a
  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002
  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002
  OGA data-->
  Status of office: 101 non-active
  Microsoft Office Home and Student 2007-100 authentic
  Microsoft Office Enterprise 2007 - 101 non-active
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 77F760FE-153-80070002_7E90FEE8-175-80070002_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_B4D0AA8B-920-80070057
  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed
  Analysis of file data-->
  Other data-->
  Office details: {12DC2847-4260-4A6B-A9BA-335DBF9AF590}1.9.0027.06.1.7600.2.00010300.0.0.003x 64*-*-*-*-7QJB700359-OEM-8992687-000062S-1-5-21-2829387469-3937667865-4165914598AcerAspire M5811American Megatrends Inc.. P01-A3 20091231000000.000000 + 0002FEF3F07018400FE04130409W
  . Europe Time(GMT+01:00) Standard03ACRSYSACRPRDCT101100Microsoft Office home and Student 20071219101Microsoft Office Enterprise 20071213C184055DBF773hrZ77ewba AXfprycfTRZJEC7n0 plus81599-953-0099897-658831  
  Content Spsys.log: 0 x 80070002
  License data-->
  On a computer running Microsoft Windows non-core, run ' slui.exe 0x2a 0 x 80070426' to display the error text. "
  Error: 0x80070426
  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0 x 0001000000000000
  Event timestamp: 7:13:2013 21:33
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered Service: sppsvc
  --> HWID data
  Current Hash HWID: MgAAAAIAAAABAAEAAgACAAAAAgABAAEAonairRQvIHXsSnLx + HMKyopSpMCOggFSdlY =
  Activation 1.0 data OEM-->
  N/A
  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC ACRSYS APIC1639
  FACP ACRSYS FACP1639
  HPET ACRSYS OEMHPET
  MCFG ACRSYS OEMMCFG
  SLIC ACRSYS ACRPRDCT
  LASRYVITRAGE ACRSYS OEMB1639
  GSCI ACRSYS GMCHSCI
  AWMI ACRSYS OEMB1639
  SSDT DpgPmm CpuPm

  The product key that is different from that on the sticker is that the OEM SLP used at the factory. Its used to install Windows 7 in volume through several models of the same system.

  To change the product key to the one on the COA sticker, try the following:

  Click Start, type: CMD

  Right-click on CMD

  Click on run as administrator

  At the command prompt, type the following commands:

  slmgr.vbs - ipk xxxx-xxxx-xxxx-xxxx (to replace the specified in the current product key)

  xxxx-xxxx-xxxx-xxxx - represents your product key

  Press enter on your keyboard

  Leave the command prompt

  Restart your computer

  Try again activate by phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Logo of security for financial sites does not appear

  Logo of security for financial sites does not appear since the upgrade from 3.6 to 6.

  In Firefox 4 and later you no longer have the Status bar which showed the padlock in previous versions of Firefox.
  
  The padlock shows only that there is a secure connection and does not guarantee that you are connected to the right server.
  
  So you could always be connected to the wrong server if you make a typing mistake in the URL and someone said that mistyped the URL.
  
  The lock feature has been replaced by the How do I know if my connection to a Web site is secure? on the left end of the address bar.

  See also:

  • http://www.dria.org/WordPress/archives/2008/05/06/635/
  • https://support.Mozilla.com/kb/site+identity+button
  • http://www.Mozilla.com/en-us/Firefox/security/identity/

  You can use this extension to get a lock on the address bar.

  • Lock: https://addons.mozilla.org/firefox/addon/padlock-icon/

• Lighroom does not open and I get the following message "this beta version of lightroom has expired.

  Lighroom does not open and I get the following message "this beta version of lightroom has expired. Help, please

  Thank you for your help.  I upgraded to LR4 and everything is now sorted (I hope)

  All the best

  Serena

  (details deleted by the moderator)

• Problem with updates of security for MS Office Outlook 2003 (KB973705) and the Outlook junk mail filter (974771 KB)

  I had problems trying to install the update of security for MS Office Outlook 2003 (973705 KB) and update for MS Office Outlook 2003 Junk e-mail filter (974771 KB). I get the error code 646.

  First of all. What is this code? I looked around and could not know what it means. In the second place. I neither use or as Outlook and would like to know short of reinstalling Office, how can I disable / remove Outlook or disable updates for it?

  Hello rwhard, welcome.

  My suggestion would be to insert your disk in Microsoft Office, and then try to perform an automatic repair. Try this:

  1. click on START
  2. click on "Control Panel."
  3. double-click on "programs & features".
  4. click on "Microsoft Office...". "and select Edit
  5. Select "repair".... "in the context menu and go through the wizard
  6. after the repair, restart your computer and try to update again

  If this does not work, I would say that simply hide you the update if you are not using Outlook.

  1. click on START
  2 type "Windows Update" (without the quotes) and press enter
  3. search for updates, and then click to view will want as an option so that you can manually select the updates to be applied
  4 right-click the two updates, then select "hide."
  5. There is no button apply, so it just close the window, and then restart your computer

  Let us know if it works,

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Epson stylus photo R1800 printer will not install and keep driver error 28 has not been installed

  Original title: my Epson stylus photo R1800 printer does not install. I get error 28 driver has not installed... I need help that I have tried everything I can think...

  I had one installed R800 and I used it for about 2 hours. Then he disappeared. I tried everything to reinstall it and no luck (error 28) now, I've upgraded to R1800 and same problem... Someone had the same problem?

  Hi Roy,

  I am sorry to say that the Epson Stylus Photo R1800 printer is not compatible with the Windows 7 operating system.

  I suggest you to check the system requirements for the printer from the link:

  http://files.support.Epson.com/PDF/r1800_/r1800_01ug.PDF#page=103&view=FitV&pagemode=none

  I also suggest you to install the drivers for the printer in compatibility mode and check from the link:

  Make older programs run in this version of Windows:

  http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

   

  For reference:

   

  What is program compatibility? :

  http://Windows.Microsoft.com/en-in/Windows7/what-is-program-compatibility

   

  If the problem persists, then I suggest you to contact support Espon from the link:

  Contact Epson Support:

  http://www.Epson.com/cgi-bin/store/AboutContactUs.jsp?BV_UseBVCookie=Yes

   

  If you need further assistance on this topic, let know us and we will be happy to help you.

   

• Series of 32-bit update Windows Media Encoder 9 of security for Windows Vista is not installed!

  Hello

  Above my security update will not be installed.  It starts to install at the beginning but then it crashes just for hours.  He tried several times but no luck.  I am running Windows Vista and I'm updating all my other updates.

  Any suggestions?

  Try to download and install it manually by downloading on your desktop and install it. Insert the number to get the good update and choose the one corresponding to your version of Vista: http://www.microsoft.com/downloads/en/default.aspx.

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  Also read and execute the steps ofhttp://support.microsoft.com/kb/971058.

  If this does not help, please transfer your question in Forum Windows Update:http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where updates experts will be happy to help you.  Please post with the information requested here:what to post in the Windows Update forum

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Vista home prem (KB967723) sp2 security update does not install and get the error code 80073712

  I tried to fire disableing walls, with work, I get all the way to installation and the i get the error code 80073712

  http://support.Microsoft.com/kb/957310

  «Error message when you try to install updates on the Microsoft Update or Windows Update Web site: "0 x 80073712" "»

  Method 1: Run (Checksur.exe) system update readiness tool

  1. Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

     For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:

     947821 (http://support.microsoft.com/kb/947821/) Description of the update readiness tool for Windows Vista system
  2. Try to install updates again.

  Note After running the tool, the Checksur.log file is stored in the following location:

  %SystemRoot%\Logs\CBS

  In a default installation of Windows Vista, is the Windows directory.

  If this method does not resolve the problem, go to method 2.

  Back to top

  Method 2: Install Windows Vista Service Pack 1 if you have not yet installed Windows Vista Service Pack 1 (SP1), visit the Microsoft Download Center and then download and install Service Pack 1. To do this, follow these steps:

  1. Quit all programs, and then click on the following link:
     http://www.Microsoft.com/downloads/details.aspx?FamilyId=f559842a-9c9b-4579-b64a-09146a0ba746&displaylang=en (http://www.microsoft.com/downloads/details.aspx?FamilyID=f559842a-9c9b-4579-b64a-09146a0ba746&DisplayLang=en)

     Note Click the option to download on the download page, click Save, and then save the download to your desktop. When the download process is complete, click run to install the SP1.

  2. Restart the computer.
  3. Try to download the updates again.

  If you can't always install updates, go to method 3.

  Back to top

  Method 3: Perform a repair of Windows Vista installation when you perform a repair installation, which restores the current installation of Windows Vista to the version on the installation DVD. This requires you to reinstall all updates that do not appear in this version of Windows Vista.

  To perform a repair of Windows Vista installation, follow these steps:

  1. Restart the computer.
  2. Insert the Windows Vista DVD into the DVD drive of the computer.

     Note If Windows does not automatically detect the DVD, click on Start, type: \setup.exe in the Search box, and then click configuration in the list programs. Then, click install now.

  3. Click connect to get the latest updates for installation (recommended).
  4. Insert the product key if you are prompted to do so.
  5. Click to accept the Microsoft software license agreement.
  6. On the screen which type of installation you want , click upgrade.
  7. Once the installation is complete, restart the computer, and then try again to install updates.

  See you soon.

  Mick Murphy - Microsoft partner

• Update of security for XP (KB2686509) would not move. Any helpout there?

  I just installed 9 of 10 updates but KB2686509 update could not be installed. Anyone have any suggestions that will help me in this situation?

  Howdy, mark,.

  IF the exception error 0x8007F0F4 code is what you have found,
  (a) if the system is a laptop, put the system plugged into the wall power supply
  (an obscure source of the problem is that this)

  and then b) making an announcement with details about your case in the next queue monitored by Susan B
  the link is this http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/kb2686509-repeatedly-fails-with-error-code/0deeacb6-115c-419d-ac37-03ff8927b79c

  IF your error code is different, post your details here, such as
  Use the Notepad & doing research in the journal of Windows Update (using Notepad)
  usually at C:\Windows\Windowsupdate.log or C:\WINNT\Windowsupdate.log

  Copy and paste here the last 50 lines of this newspaper, for review.
  Go to end of the log of the last entries and get ratings of the error.
  You can use the keys on the keyboard CTRL + END to reach the end of the file. Then download the last 60 lines & copy & paste here in response

  See the Microsoft KnowledgeBase article
  902093 KB how to read the Windowsupdate.log file
  http://support.Microsoft.com/kb/902093

• Do not have Microsoft office installed on the system, but the updates of security for Microsoft office suites are installed automatically.

  I do not have Microsoft office installed on my computer, I need updates of security suites for Microsoft office, that were automatically the installation on my computer.

  Hello

  You use the editions of Office before on your system?

  This can occur if you have installed all editions of Office before on your system.

  As you use Office editions, you can hide these updates and check if that helps:

  a. open Windows Update by clicking the Start button, clicking all programs, and then clicking Windows Update.

  b. click on view available updates , and then click on hide update.

  If you want to remove the installed office updates, then remove the updates and change the parameter in advising me on updates, so that you can hide these updates.

  For more information, see the articles:

  Remove an update

  Change how Windows installs or notifies you of updates

• Upgrade the component of security for Media Player does not work; Help!

  I'm trying to download audio books using Overdrive, and I did everything to try to get the Media Player security upgrade to work. Each time, I get the response "the component cannot be upgraded", but absolutely no explanation.

  I have tried both the Web site and the Overdrive toolbar (I get no response at all from the toolbar Overdrive.)

  I tried to re - appoint the DRM folder. I tried to empty the cache memory on the DRM folder and delete everything in the folder.

  I tried to install a new version of media player.

  I tried to re - working the msconfig startup (following instructions I found on another forum)

  I tried to remove my firewall to allow the website to work.

  I added the site of drmlicense as a trusted site.

  I'm at my wit's end.

  Help, please!

  I solved this problem! (at least for me). I had actually given up on the problem.  Last night, I went through a complicated process to replace WMP 12 with WMP 11 (made it harder to think I have a 64 bit system, but has managed to hack WMP 11 to work as a result of another forum).  When I got the same error, I said that was enough and abandoned.

  BUT... today, I took my laptop to work and thought, I would try once more... :)

  IE open in administrator mode, went to the site, clicked the button and low and here this worked 1st try! My zune software works!

  I don't know what is the key factor, but try to take your computer (if all goes well, it's a laptop) to another router/modem/hotspot.

  At home, I chose 'rental house' in dialogue of connection, and at work, I chose "work/Office.  Not sure if this is important.  Good luck to all!

• Windows Update KB953297 (Net Framework 1.1) does not install

  Hello

  Windows Xp Sp3

  Procedure of common windows update wants to install update KB953297 security

  Updated download and inilialises, but refuses to install.

  What's wrong?

  What is the solution?

  Keith Keith

  Thanks Adamjy12345!  Amazing!  After spending a whole day with MS support yesterday, January 27, 2010 and getting nowhere, I followed your suggestion today and it seems that my troubles with the issue of the kb953297 are more.  I just rebooted and checked, and this time I have not asked me to update .net framework (953297 KB).

  I don't I remember exactly what I've done since the shock of seeing "installed successfully" hit me.  However, for others, I say lets find the netfx files after you run the dotnetfx.exe first the search option of windows classic.  Research others (I am running windows XP PRO) does not work, because I believe that it does not immediately again locate files.  Also, I do not see the file named netfx.msi when I did the search.

  Wait now, new information appears: my memory starts to come back, and I think remember me that * NPD1 * successfully completed the second time I tried without me having to tell her where the * netfx files were; so NDP1.sp1 - KB953297 - X 86 .exe found the files there without my help, even though I've never actually seen the netfx.msi file location!  I hope you have the same chance.  Don't forget to run dotnetfx.exe first, then run the NDP*.exe file at least twice, if it doesn't work the first time.  I know it's illogical, but well, these things are too complicated for me to describe with precision.

  p.s., Adam - I don't know how "mark you' but of course you deserve.
  Update - I've tagged you 6 to 7.  Hope it's what you mean. (Jan 28/10 @ 1115hrs.)
  Greetings to all.