How to configure Cisco Telepresence SX 20

Similar Questions

• Configure Cisco Telepresence SX20 to use H323

  The engineer back a configuration a model for this unit. Because SIP is not used by the seller which we will be conferences with I have to configure this device in the call manager to use H323. Can someone guide me where in Call Manager I can install this device to use the H323 Protocol.

  CUCM is SIP only, if you need make a H323 call. You will need to either Setup of endpoint without CUCM self-sustaining, as Acevirgil mentioned, however it isn't bigger than its configuration already with CUCM. The other alternative is if you have a VCS or highway, or of those who can ensure Interworking using SIP to H323 and vice versa.

  Do you know why the other side can't H323, is there a way to ensure the interoperability of H333-SIP calls?

• Cisco telepresence sx20

  Dear support team,

  I want to know how to configure cisco telepresence sx20.

  any body can help pls...

  Configuration Cisco Telepresence Sx20 is not easy to do. I think below link will help you for configuration.

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/endpoint/quick-set-SX20/TC5/administrator_guide/sx20_quickset_administrator_guide_tc51.PDF

• Cisco Telepresence SX20 and Touch 8 Configuration after paired

  Hello

  I successfully connected and combined the SX20 Cisco's Telepresence and Cisco Telepresence Touch 8. Before using the 8 key, we used the remote control instead. As a result, I have two questions about this.

  1. as far as I know, when I use the 8 key, the remote control cannot be used. Is it possible to use both of them?

  2. How can I change the background of my SX20 touch 8? Previously, the remote I can easily choose the background for my SX20. But after pairing with Touch 8, background in my SX20 become a blue large clock. I really want to have a different background but cannot find the way how to change.

  Any help would be appreciated.

  Thank you.

  Sincerely,

  Bagus Hanindhito

  After you connect the 8 Touch, you can still use the remote control, you will need to put on the SX20:

  SystemUnit MenuType experimental configuration: full

  I think that the standard background when using a touchscreen device is what you see, blue with large clock.  However, after the MenuType return in full which will give you the full OSD which is used with the remote and not that of the button, you may be able to change the background then.

• Configuration of the firewall Cisco Telepresence MCU 5320

  Hi all.

  I searched all the documents of the MCU again, but I found nothing on the ports it uses.

  Help me

  HI Sandra.  The 5320 MCU is the same as 4500 MCU.

  Incoming ports

  • FTP - TCP:21 + transient (dynamic rather than fixed) used TCP ports for passive mode
  • HTTP - TCP:80
  • HTTPS - TCP:443
  • H.323 - TCP:1720 + ephemeral TCP ports for incoming calls
  • SNMP - UDP:161
  • Outgoing calls to H.323 involve ephemeral ports TCP connections TCP TCP:1720 and a certain number of ephemeral TCP ports
  • Outgoing SIP TCP calls involve connections between the TCP ephemeral ports and TCP:5060
  • Outgoing SIP TCP calls involve connections between the TCP ephemeral ports and TCP:5061
  • Outgoing interruptions SNMP are sent the ephemeral ports UDP Port 162
  • Media (including audio and video, FECC messages) are ephemeral ports from ephemeral ports UDP.
  • The products acquired Cisco TANDBERG/Codian and gateway series series Cisco TelePresence allocate the ephemeral ports between 49152 to 65535 *. It is possible to change the ports on which these products receive and establish connections. For example, by default the Codian products Cisco acquired listen port 1720 H.323 calls and connections to port 80 web browser, but these can be modified (go to network > Services).

  Keep in mind this MCU does not support the streaming or conference me and have either the GK aboard.  If these ports are listed.

  The link to the Article can be found here:

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/articles/conferencing_products_conferenceme_ports_used_kb_3.shtml

  VR

  Patrick

• How to extend your horizontal field of vision for Cisco TelePresence PrecisionHDMC camera

  Hello

  We use the camera PrecisionHDMC of Cisco TelePresence, but we want to expand the horizontal field of vision?

  Do what van?

  Kind regards

  Martin

  Hello Martin

  Telepresence PrecisionHDMC camera comes with the fixed maximum VISION field, depends on the model you have.

  Please visit this link:

  http://www.Cisco.com/en/us/prod/collateral/ps7060/ps11307/ps11335/data_sheet_c78-669051.PDF

  Thank you

  Rafal

• Configuration Cisco AP 2600 (AIR-CAP2602I-E-K9) and Cisco 2500 wireless controller?

  This is the first time that I work with this type of devices (Cisco Ap 2600 (AIR-CAP2602I-E-K9) and wlc 2500)... my experience to the CCNP (router and Switch)

  How configuration Cisco Ap 2600 (AIR-CAP2602I-E-K9) and wlc 2500?

  Please find attachment (Cisco device map)

  

  Hello

  Here are the docs for you to configure the Basic for AP switch port configuration IE 2600 s and wlc.

  WLC port must be configured as a trunk.

  Port of the AP must be access.

  CAP2600 series requires software 7.2.110.0 wlc minimum (make sure you have it or above release)

  Upgrade if you follow it.

  http://www.Cisco.com/en/us/Tech/tk722/tk809/technologies_configuration_example09186a00805f381f.shtml

  1. http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a0080665cdf.shtml (SW port configs)

  2. http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a00806c9e51.shtml

  (Another thing very importand, discovery mechanism, choose properly)

  If you choose the option dhcp 43, it uses the TLV format. Type is always f1, the length is 4 * (wlc number for which you want to provide discovery for, in your case) Value = Hex conversion of the wlc management ip address.

  A video for the process of

  http://www.youtube.com/watch?v=oOh_Iv1CHxQ.

  Thank you

  Sahil

• Configuration Cisco 881

  Hi all

  Let me start by saying I've searched high and low to find answers to my questions but couldn't find one. So here: I'm not very familiar with Cisco products. I have some knowledge and experience with configuration of routers/switches but all very basic. Today, we received our new router to our business environment. A standard C881 Cisco-K9. Our previous router was a model House and not suitable for our needs.

  -Configuration of the WAN port. We have a fiber of our ISP connection, the modem they provide has a useful interface that we can use our internet connection. Basically just connect our router to the router with a network (RJ-45 UTP) cable. Very basic, but it is that we put in some very specific IP on our router on the router to communicate. No DHCP on our side of the ISP; I have to put in manually by default, a gateway address DNS, subnet mask and IP address. How to proceed on the CLI? What are the commands once I have access to the port to the WAN interface?

  -I know a little how configure DHCP for our workstations, but one thing that has been a problem, is that the ports are L2 according to the router. Once I put in the no command switchport, in order to be able to assign a DHCP server to an interface I get a message prompt that the command was not disabled or something like that. How to solve this?

  -How can I set up a VPN on a specific interface on the router port? And is it possible to use the portfast on this interface once said VPN is enabled? I need to do this because our mediaplayers running on Android have problems with the VPN and DHCP at the same time. And static assignment does not work, I tried.

  I would be very grateful for your help!

  Hello

  Assuming the following:

  1. WAN interface is GigabitEthernet0/0
  2. Static IP address given to you is 1.1.1.1/30
  3. Default gateway is 1.1.1.2.
  4. LAN is GigabitEthernet0/1 and is configured as 192.168.1.1
  5. LAN subnet is 192.168.1.0/24

  -To set up your interface WAN from the Global Configuration mode:

  interface GigabitEthernet0/0

  IP 1.1.1.1 255.255.255.252

  no downtime

  IP route 0.0.0.0 0.0.0.0 1.1.1.2

  ! You need to configure NAT as well!

  -To set up your DHCP for your local network:

  int vlan 1 (or any VLAN that you use)

  IP 192.168.1.1 255.255.255.0

  !

  DHCP excluded-address 192.168.1.1 IP 192.168.1.10

  !

  IP dhcp data pool

  network 192.168.1.0 255.255.255.0

  default router 192.168.1.1

  business domain name

  Server DNS 8.8.8.8 8.8.4.4

  0 8 rental

  More details: http://www.internetworkingcareer.com/ccna/how-to-configure-your-cisco-router-as-a-dhcp-server/

  -The VPN will be implemented on the WAN interface. If you have problems 'VPN and DHCP', then your VPN probably is not configured correctly. PortFast can not be enabled on a port of layer 3, and even though it is possible he would do nothing since STP does not run on it. Just forget about Portfast altogether when you think of your VPN.

  I hope this helps!

  Kind regards

  Tim

  Please don't forget to rate helpful messages and mark the answers accurate.

• How to configure a FTP server and the web and integrate with 5.2 DMM

  Hi all...

  I need to set up an external server only for publishing content to reduce the overhead of the DMM server.

  can someone guide me on how to configure the external server and it intergrate with the DMM 5.2

  Thank you

  semuthu,

  
  

  Notes from the Release Notes:

  
  

  Limitations of compatibility with Microsoft Internet Information Server (IIS)

  DMP who use firmware version 5.2 is compatible with a single version of Microsoft Internet Information Server.

  This supported version is IIS 6.0 for Windows 2003 Enterprise Edition. If you do not have the support for IIS version but

  want your DMP to recover the assets of a Web server, we recommend that you use Apache instead of IIS.

  
  

  
  

  I suggest to use Apache instead of IIS for the Web Server service. IIS can be used as FTP if necessary.

  There are a lot of Documents on the Internet concerning the implementation of Apache and FTP servers.

  
  

  Using Apache with Microsoft Windows

  http://httpd.Apache.org/docs/2.0/platform/Windows.html

  
  

  Quick HOWTO: Ch20: Apache Web Server

  _ http://www.linuxhomenetworking.com/wiki/index.php/Quick_HOWTO: _Ch20_:_The_Apache_Web_Server

  
  

  Once the Web server is configured and operational. You simply record your multimedia content on the Web server

  and then have your DMS assets in the library using an external URL address for its location.

  
  

  If you want to use the external server for other features in the DMM, you can see how to set up

  here:

  
  

  http://www.Cisco.com/en/us/partner/docs/video/digital_media_systems/5_x/5_1/DMM/user/guide/DSM+ETV.html#wp1073210

  Goto the section just below the CNSC & WAAS...

  
  

  If this answers your question, take the time to mark this

  discussion answered & rate the answer.

  
  

  Thank you!

  
  

  T.

  
  

• Cisco TelePresence Manager version 1.7 does support Windows Small Business Server 2008?

  Hello

  Is Microsoft Windows Small Business Server 2008 supported the Protocol LDAP, AD and MS Exchange server for Cisco TelePresence Manager version 1.7?

  Thank you

  AA

  Hello Ahmed - although this configuration "can work", Windows 2008 Small Business Server is not on the support list. This means that it has not been tested and it certifies to work with telepresence.

  To my knowledge, he's not on the roadmap for the future support however, I search and repost as soon as I have an answer for you.

  Kind regards

  -Andrew

  Sent by Cisco Support technique iPhone App

• Cisco TelePresence SX20 with laptop

  I use a Cisco TelePresence as autonomous SX20 endpoint configured with a public IP address (in Pakistan). I want to connect a portable computer (to Canada) to start video conferencing using the portable camera. Please advice me the software to install on the laptop so that I can start with my SX20 videoconferencing based on IP configured on my SX20.

  To understand kindly refer to the disposal of partner network.

  Please help me its urgent.

  Hello

  www.ciscojabbervideo.com

  BR Oleksandr

• Cisco TelePresence SX20 + VCS 8.2 Server and Skype for business 2015

  Nice day! My name is Dimitri! Have Cisco TelePresence SX20 + VCS 8.2 Server and Skype for business 2015. Is it possible to set up a conference call SFB and appeal to all subscribers of this conference? At present, we can only call on a single client and SFB. We have the current version of the software TCNC5.1.4.295090 SX20 - is it possible he obnoviti 7, and it will help to improve the situation? Thank you!

  I'm no expert on this technology, but I have some idea and already deployed some projects dealing with the integration of Cisco (CUCM, VCS) video infrastructure to Microsoft video infra like Lync. It would be the same process to make it work in your case.

  How does your deployed SFB? How do you do a conference for audio and video, participants can join the conference by dialing?

  • Mediation server would be required as a front-end server for you to integrate IP/PBXS using SIP trunk to enable voice (audio) Conference with the participants to the PSTN.
  • AVMCU Should be (Audio video Multipoint Conferencing Unit) will host the video conference that will include video endpoints as participants.
  • Video of Interop (SCREW) Server would be required to interface your SFB to third video conference infrastructure such as Cisco UCM or VCS for the endpoints Cisco call client SFB of endpoint of Cisco to participate to the conference organised on SFB by dialing the conference number.

  I'd say contact your AM SFB or Support as well for queries about how to plan your infrastructure SFB and direction.

  Kind regards

  Acevirgil

• How to configure the UCS Manager?

  Hi, this is the first time im using the Cisco server and we have Cisco c240. My task now to monitor this server using SCOM. Research, I understand that it will take to install/configure the UCS Manager. But I'm not really sure how to set it up, I know it's similar with Dell OMSA, but for the OMSA, just install the application. But how do the Cisco server?

  Hello

  Although it is not clearly documented, integration SCOM is supported only for the blades of the series B and C-series rack mounts, which are integrated with UCS Manager. No support for stand-alone C-Series.

  Walter.

• How to configure ACS 5.2 to manage the Junos 10.4R6.5 fwl via GANYMEDE.

  Hi all

  I have a camera ACS 5.2 newly installed, integrated with our announcement and his work with cisco product, routers switches and etc.  Now I would like to include Juniper firewalls so to be authenticated via ACS 5.2 either via ssh and web access.  Can someone share me how to initiate this, creating policies.

  FYI: I have 14:00 groups regionaladm and regionalops, read/write and read-access, respectively.

  Kind regards

  Marlon

  Marlon,

  I stuck in a config below file I made for our ScreenOS Firewall work with Cisco ACS v5.2.  This configuration may not work because yours is Junos, but it could bring closer you reach to understand.  Also, if you have not been on the Juniper J-Net ask autour, give it a shot. (forums.juniper.net)

  Good luck!

  -Chris

  Title: Example configuration - GSU of Juniper and Cisco ACS v5.x

  Product: SSG320M juniper (Cisco ACS v5.x)
  

  Version: 6.3.0r10.0 ScreenOS (Cisco ACS v5.2.0.26.8)

  Network topology:

  [Juniper SSG320M]-[Cisco 3560 Switch]-[Cisco ACS VM]
  

  Description:

  Goal - authenticate GSU administrators using GANYMEDE + instead of local connections

  Description - This configuration for Cisco ACS v5.x, JTACS had only configuration v3.3.

  ACS v5.x is a VM based on Linux with a completely new user interface and structure.

  Configuration:

  Configure the Juniper (CLI)

  1. Add configuration Cisco ACS and GANYMEDE +.

  Set id CiscoACSv5 of auth-server 1
  set the auth-CiscoACSv5 server ServerName 192.168.1.100
  set server CiscoACSv5-type of admin account
  set the server CiscoACSv5 auth type Ganymede
  Define auth-server CiscoACSv5 Ganymede secret CiscoACSv5
  define CiscoACSv5 Ganymede 49 auth-server port
  Set the server auth admin CiscoACSv5
  Set admin auth distance primary
  Remote admin auth root set
  define outer-get administrator privileges

  Configure the Cisco ACS (GUI) v5.x
  1. navigate to elements of strategy > authorization and permissions > peripheral Administration > Shell profiles
  Create the profile of Shell of Juniper.
  Click the button [create] at the bottom of the page
  Select the general tab
  Name: Juniper
  Description: Custom for Juniper SSG320M attributes
  Select the custom attributes

  Add the vsys attribute:
  Attribute: vsys
  Requirement: required
  Value: root
  Click on the [Add ^] button above the field for the attribute

  Add the attribute of privilege :

  Attribute: privilege
  Requirement: required
  Value: root

  Note : you can also use "read-write", but then the local admin does not work correctly
  Click on the [Add ^] button above the field for the attribute
  Click the button [send] at the bottom of the page

  2. navigate to access policies > Access Services > default device Admin > authorization
  Create the authorization policy of Juniper and filter by IP address.
  Click [customize] at the bottom right of the page
  In terms of customize, select IP address in the left window
  Click the [>] button to add
  Click the [OK] button to close the window

  Click the button [create] at the bottom of the page to create a new rule
  In general, the name of the new rule Juniper and make sure that this option is enabled
  In Conditions, check the box next to IP address
  Enter the ip address of the Juniper (192.168.1.100)
  Under results, click the [Select] button next to the Shell profile field
  Select "Juniper" and click the [OK] button
  Under results, click the [Select] button under the command field sets (if used)
  Select "allow all the" and make sure all other boxes are not CHECKED
  Click the [OK] button to close the window
  Click the [OK] button at the bottom of the page to close the window
  Check the box next to the policy of Juniper , and then move the policy to the top of the list
  Click on the [Save] button at the bottom of the page

  Audit:

  Connect to the CLI of Juniper and GUI using an ACS internal user account and try to change something to check the level of privilege.

• Configure Cisco ASA VPN client

  I did some research and the answers it was supposed to be possible, but no info on how to do it.  I wonder if it is possible to configure a Cisco ASA 5505/10/20 to be a customer to an existing (in this case) cisco vpn client.  The reasons why are complicated (and irrelevant IMO), but basically, I need to be able to make a small network that may be on this vpn rather than on individual computers.

  The vpn client is a Basic IPSec over UDP Cisco VPN to an ASA5505.

  So, how to set up an another ASA to connect to it as if it were a client?

  Hello

  Here is a document from Cisco on the configuration, the easy ASA of VPN server and Client

  Although in this case, they use a PIX firewall as a client.

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00805c5ad9.shtml

  Here's another site with instructions related to this installation program

  http://www.petenetlive.com/kb/article/0000337.htm

  I imagine that the site of Cisco ASA Configuration Guide documents will also give instructions how to configure it.

  -Jouni