Then bits started and stopped

Similar Questions

• iOS 10 times to start and stop the music messed up

  I'm running a SE 64 GB iPhone with iOS 10. Many songs from my iTunes library has some moments of power, but after update, they are all mixed. Songs don't start or stop when they're supposed to, or they're going to start and stop at a random time, which is annoying. The same problem was in the beta, causing me to backup on iOS 9. I assumed that this bug would be fixed in the final version. All the solutions in addition to remove and re - download my library?

  Hello Carnage1215,

  Thank you for reaching out to the Community Support from Apple. I understand your music has had some problems and I want to help him. By the sounds of things that your songs start may be delayed or in the middle of the piece, is that correct?

  Before you make too much trouble shooting, it's a good idea to make a backup of your iPhone If you don't have it already. If you do not know how to save your phone from this article will guide you in the process: the backup of your iPhone, iPad and iPod touch

  Once you have made a backup, I would recommend to reset all the settings on your iPhone. This will ensure that all old data of a version of iOS parameter are removed and reset default. This removes all data and applications, photos or contacts, but it removes all of your preferences for the Wi - Fi, Bluetooth, do not disturb, Notifications, general, sounds, contact ID, brightness & paper painted and privacy, then you may need to define these things upwards after this reset.

  Do this please go to settings > general > reset > reset all settings.

  If you always use the same behavior after you restart your phone, please inform the community. We are all here to help.
  Best regards.

• My Mac Mini is extremely slow and any video will start but soon stops and intermittently starts and stop immediately. What is the reason?

  My Mac Mini (end 2012) 2.5 ghz memory 8 GB Yosemite 10.10.5 is extremely slow. I read a few articles on communities, but unable to solve the problem. I plan to upgrade memory soon. In addition, a video game doesn't quite work. It starts and stops in 5 seconds and restarts it for a few seconds and stops completely. An advisor to fix the problem will be appreciated.

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Why my computer does not delay when I try to watch the video again? It's a constant start and stop and buffering?

  I get a lot of golf maaterials and lesson over the internet.  It became a real pain and a problem for me to keep up with instructions.  When I received instruction to internet and start to play the video it winds and winds and play them for a few seconds then start and stop throughout the presentation.  What can I do to fix this problem?

  If several computers are using the internet at the same time, it might slow down the video stream on a computer (laptop or desktop).

  Or your internet connection is simply not enough fast to stream the videos you want to watch. There are several different speeds for DSL, so the speed increase may help.

• Start and stop too slow

  My computer starts and stops very very slow (more than 3 minutes)

  Hi AngelAcevedo,

  ·         Did you do changes on the computer before the show?

  ·         The startup problem occurs after the connection or if you are referring to restart is slow?

  Follow these methods.

  Method 1: Run the disk cleanup tool.

  Description of the tool in Windows XP disk cleanup

  http://support.Microsoft.com/kb/310312

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to set performance options in Windows XP

  http://support.Microsoft.com/kb/308417

  For reference:

  How to make a computer faster: 6 ways to speed up your PC

  http://www.Microsoft.com/atwork/maintenance/speed.aspx

• Digital start and stop trigger with restart HW

  Hello

  I am trying to write a program that reads continually samples based on the rise and fall of a digital triggering.  I want the measure to start on the front of the trigger and stop on the falling edge of the trigger.  I want the data that are read to be preserved and then added with the next set of data that the trigger rises again.  I have read the tutorial "Digital start and stop trigger" and can use the reference to stop the measurement process and I looked at the example "Acq & chart voltage - Int Clk - HW Trig restarts ' that comes with LabVIEW and I can get the two of them working separately with my request.  I'm quite confused however try to put the two together (see attachment).

  If I put a "Start.vi" icon inside the while loop then I get an error "you can do this while the measure is still ongoing".  If I put it out of the loop and then the process only runs once.  I tried to put a loop structure case for restart only if necessary, but this has produced another error which the source escapes me.  Is there a standard way to do this and if so someone can point me in the direction of an example?

  See you soon,.

  Glen

  I think that in this situation, it would be preferable to use a Pause trigger.  You can use the break to stop the acquisition when the trigger was low and start when the trigger is high.  In this way, served only for the duration of your trigger pulse.  I've attached a screenshot of a VI that illustrates this principle in action.

• I installed G10-ebook but when open it and write down the username and password it starts and stops immediately and closes what should I do?

  I installed G10-ebook but when open it and write down the username and password it starts and stops immediately and closes what should I do?

  Hello

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.
  The System Configuration Utility dialog box appears.
  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• Start and stop problems under Vista

  My PC has started taking much time to stop and start.  I didn't install something again and stopped all my programs auto starting but always start and stop takes forever. Can help in any...

  Hello

  Make sure you have the services Superfetch and ReadyBoost are running and then try to speed up the boot with the help of my guide [1]. This causes the prefetcher in Windows Vista. This increase startup performance a lot. All other tweaking tools are useless. Use this method only with the Microsoft Toolkit.

  If it is not to speed up the startup process, follow my guide [2] to start track and to compress theboot_BASE + CSWITCH + DRIVERS + POWER_1.etl as RAR or 7z, also make a trace of the judgment and compress theshutdown_BASE + CSWITCH + DRIVERS + POWER_1.etl too and download the 2 files zip on your Skydrive [3] and post the link here.

  I take a look at the trace, maybe I see what's wrong with your Windows.

  André

  [1] http://www.msfn.org/board/index.php?showtopic=140262
  [2] http://www.msfn.org/board/index.php?showtopic=140247
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65 [3] "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Records of Vista Media Center starts and stops at the wrong time

  I use Windows Vista Home Premium, SP1 and that you may have noticed that when I schedule recordings for some a particular channel, Media Center starts 2 minutes beforehand and ends 2 minutes in advance.  This affects only shows record from my local affiliate Fox - all other shows for other strings start and stop at the appropriate time.

  I checked the system clock with the start times of the shows and both are correct.  In fact, I saw one day Media Center started to record for a show that did not begin until 08:00 at 19:58 (according to the system time).  I had my TV on at the same time and was able to verify that the program in question had not yet begun, so the flow of the internet was sychned with the dissemination of local transmission.

  It's very frustrating because I miss the end of some shows and cannot always extend registration ends because I'm ordering another channel, the next hour.

  I have the same problem with the FOX network...

  -1 make sure your clock automaticly sets in the internet and update once by pressing the link (which makes that he can see the time server)...

  There are two ways you can go with this:

  -If your departure time is correct, then just go to the Planner and choose the program (or series) you are trying to install, select the recording settings (or adjustment of series) or advanced setting... There is an option to "stop recording" 1 min, 2 min, 3 min, 5 min, until 2 hours after the recording is finished... I have mine set to 5 minutes after, and she fixed it...

  -If the starting time is disabled (as mine is), to enter ERM and manuver to tasks > settings > TV > recorder > recorder defaults

  This is where you define all the flaws of the recorder, find "Start when possible" and "Stop when possible", 4 min value (max allows MCE)... Save and exit, restart the machine too...

  You should be good to go...

  PS, I just read the last sentence in your post, you must only have a tv tuner card in your machine (I have two, and that's the reason why I bought two), so you can always have a problem when recording two different channels (back to back on the same channel should work okay).

• Why continue those class Scheduler start and stop every half hour approximately

  Why continue those class Scheduler start and stop every half hour approximately. I am fortunate to have a sound event for the event program open and this event is triggered by Multimedia Class Scheduler, it seems, every half hour.
  Is this normal?
  Can I disable it?

  James

  Hello

  Service Multimedia Class Scheduler (MMCSS) allows multimedia applications to ensure that time-sensitive processing receives priority access to the CPU resources. This service allows multimedia applications to use CPU as possible without denying CPU for low-priority applications as well.

  This service is required only for the fact that the Windows Audio service lists this as a dependency. Without the Windows Audio service, no audio signal will play on the system. This service is started when the system starts, but shortly after (~ 8 minutes), it stops.

  This is a Notification which will start with all programs that use Windows Audio. For an example if you open Windows Media Player, then multimedia class scheduler also starts because it uses the windows audio.

• Black horizontal lines on the LCD screen at a specific time during the start and stop

  Hi, I am currently using a Presario CQ61 Notebook PC.  My problem, as indicated in the title, are black lines on the LCD screen, apparently when the screen is reset or enclose itself turned off during the start and stop only. From the judgment, he produced a split second her stops the hard drive, after that the screen is black. The lines and then quickly disappear. At startup, lines appear after the Windows logo has passed and the screen went from black to start loading the login screen.

  The LCD is in perfect condition, all using the PC. No line, no discoloration, etc.. Nothing extraordinary either. The problem does occur only during these two periods, specifically. I am also unable to note the lines when I'm looking directly at the screen. I have to be standing next to the PC, at an angle.

  Now, I had this PC for a considerable amount of time, however, I never paid much attention to the screen when starting upwards or stop, so this could definitely be something that the laptop has done since I bought it. I also read on similar problems, and it could be an outdated video driver or BIOS.

  I want to just make sure that it is not a major problem. Thank you all!

  Hello

  You have a few options in my opinion please try these steps can help you solve your problem.

  1) click Start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility. Under the Services tab, click to select the hide all Microsoft services check box, and then go to tap Start , click on disable all. Click apply OK restart the device.

  (2) please visit the HP website and update the Bios and graphics drivers on the unit.

  Let us know how it goes!

  * Although I am an employee of HP, I speak for myself and not for HP.

  Click the White Star Kudos to say thank you *.

  Please check accept as Solution if it solves your problem *.

  Concerning

  Maton

• Start and stop Virtual Machines with the system

  Hello

  In a server cluster @vcenter HA/DRS 5.1, I enabled start and stop virtual machines with the system option but after I checked two days later, he is off again somehow. What makes this option off? I had a power failure in the datacenter. vCenter server has not been upward. I started all of the ESXi servers manually then went all VMs account is declining. I want that they start automatically when server ESXi upward.

  Thanks in advance,

  Thank you. This option is more valid than if the hosts are part of an HA Cluster license. I suspect that you configured through the traditional vSphere Client and that it is a bug with this client. If you try with the new vSphere Web Client, you will find a notice that it is disabled and there is no button "Edit".

  Concerning

• PowerCLI defining politics NTP to "Start and stop with the host" in ESXi 5

  Would appreciate any help in the definition of the strategy NTP on ESXi 5 hosts 'start and stop with the host. My script is currently using the following:

  Get-VMHost MyEsx | Get-VMHostService | where {$_.} Key - eq 'ntpd'} | Game-VMHostService-policy "automatic."

  This sets up the NTP service in "start automatically if all ports are open and stop when all ports are closed.

  "When I cange to 'MyEsx Get-VMHost | Get-VMHostService | where {$_.} Key - eq 'ntpd'} | Game-VMHostService-political ' market / stop with host"" the following is returned:

  «The possible enumeration values are "auto, On, Off«»»»

  Anyone know of a way (in PowerCLI) of the set up for the 'start and stop with host?

  OK, then you should choose politics "on".

  These are the policy values and what they match.

  

  Like this

  Get-VMHost MyEsx | Get-VMHostService | where {$_.Key -eq "ntpd"} | Set-VMHostService -Policy On
  

• Commands to start and stop a virtual machine hosted by VMware player

  Where can I find the commands to start and stop a virtual machine hosted by VMware player on a host Windows Server 2008 R2 (64-bit)?

  I need to start and stop the virtual computer from a script as I could do this by selecting the ' power on ' and his 'guest stop' or at least 'power off' options of the GUI of VMware player.

  If a control interface is not available, is available if I update to VMware Workstation?

  Concerning

  Marius

  With the player, the VIX API is a separate download (on the same page you downloaded the install drive in), so I guess you will have to install the separate package to use it.  But it's pretty easy to do...

• PowerCLI start and stop ssh and necessary permissions vcenter

  We will use VMA PowerCLI for start and stop SSH via vcenter for guests ESXi 4.1. We do what we're going to start ssh, security nessus scan performance and then stop ssh. We are very pleased with the commands of VMA PowerCLI for this and I've seen a number of articles on this topic. What we have done is create a specific AD user, we will use by PowerCLI to connect to vCenter and perform the beginning and stopy of SSH. I want to do is to restrict this user with a specific in vCenter privilege so that this user can only start and stop SSH. Is there a specific privilege in vCenter I can create a role for and assign it to that user.

  Yes, the host and then Config